An Analysis of the Self-Healing and Mechanical Properties as well as Shape Memory of 3D-Printed Surlyn® Nanocomposites Reinforced with Multiwall Carbon Nanotubes.

This research work studies the self-healing ability, mechanical properties, and shape memory of the polymer Surlyn® 8940 with and without multiwall carbon nanotubes (MWCNTs) as a nanoreinforcement. This polymer comes from a partially neutralized poly(ethylene-co-methacrylic acid) (EMAA) ionomer copolymer. MWCNTs and the polymer went through a mixing process aimed at achieving an excellent dispersion. Later, an optimized extrusion method was used to produce a uniform reinforced filament, which was the input for the 3D-printing process that was used to create the final test samples. Various concentrations of MWCNTs (0.0, 0.1, 0.5, and 1.0 wt.%) were used to evaluate and compare the mechanical properties, self-healing ability, and shape memory of unreinforced and nanoreinforced materials. Results show an enhancement of the mechanical properties and self-healing ability through the addition of MWCNTs to the matrix of polymer, and the specimens showed shape memory events.

Novel and Accessible Physical Recycling for Expanded Polystyrene Waste with the Use of Acetone as a Solvent and Additive Manufacturing (Direct Ink-Write 3D Printing).

The current high production of plastics has prompted the exploration of alternative pathways to facilitate recycling, aiming for a progressively sustainable society. This paper presents an alternative and affordable technology for treating waste expanded polystyrene (EPS) mixed with acetone in a 100:1 volume ratio to be used as 3D printing ink for Direct Ink Write technology. In order to optimize the printing parameters, a comprehensive study was conducted, evaluating different needle diameters, printing speeds, and bed temperature values to achieve homogenous pieces and a highly repeatable 3D printing process. Results showed that the main optimum printing parameters were using needles with diameters of 14 to 16 G and printing speeds ranging from 2 to 12 mm/s, which were found to yield the most uniform ribbons. Increasing the bed temperature, despite favoring acetone evaporation, led to the generation of more heterogeneous structures due to void growth inside the printed ribbons. Thus, employing room temperature for the bed proved to be the optimal value. Lastly, a comparative study between the starting material and the EPS after the printing process was conducted using FTIR-ATR and GPC analyses, ensuring the preservation of the original polymer's integrity during physical recycling.

An Analysis of the Effect of Activation Temperature and Crack Geometry on the Healing Efficiency of Polycaprolactone (PCL)/Epoxy Blends.

Self-healing materials have attracted great interest in recent years. Particularly, the use of thermoset/thermoplastics blends has emerged as a good option with relatively low activation temperatures and potential infinite healing cycles. Nevertheless, a methodical study of healing conditions and evaluation is still required for further industrial development. The effect of activation temperature and crack morphology in polycaprolactone (PCL)/epoxy blends are explored. For this purpose, PCL content was varied (5, 10, and 15 wt %) with contents lower than critical composition. Therefore, the morphology of all studied blends is the epoxy matrix with a separated PCL phase. In this sense, an increase in PCL content leads to a reduction in the Tg, due to the partial PCL miscibility, and the presence of larger PCL domains. It was observed that a higher temperature (150 °C) and PCL content led to a more efficient self-healing process because of both the lower viscosity of the melted PCL at higher temperatures and the presence of larger PCL reservoirs when increasing the PCL content. Crack morphology influence was studied by inducing cracks with different tools: a custom crack machine with a cutting blade, a scalpel, and a pin. The results show that the recovery was better when the cracks were smaller and shallower, that is, with the pin. In addition, the healing efficiency by means of both parameters, crack volume and depth change, showed more similar results in slimmer cracks, due to a lower crack width-to-depth ratio.

Multifunctional Carbon Nanotubes-Reinforced Surlyn Nanocomposites: A Study of Strain-Sensing and Self-Healing Capabilities.

Multifunctional nanocomposites based on carbon nanotubes (CNT)-reinforced Surlyn, which is a commercial ionomeric polymer, are manufactured by micro-compounding and hot-press processes. Multifunctionality is studied in terms of electromechanical response and self-healing abilities. The strain sensing analysis under tensile conditions shows ultra-high gauge factor (GF) values from 10 to 20 at low strain levels up to 106 at high strain levels, and a decreasing sensitivity as CNT content increases because of the reduction in the tunneling distance between neighboring nanoparticles. The electromechanical response under consecutive tensile cycles demonstrated the robustness of the proposed materials due to the repeatability of both responses. With regard to mechanical properties, the addition of CNT induces a clear increase in Young's modulus because the nanoparticles enable uniform load distributions. Moreover, self-healing capabilities are improved when 4 and 5 wt.% CNT are introduced because of the synergistic effect of the high thermal conductivity of CNT and their homogeneous distribution, promoting an increase in the thermal conductivity of bulk nanocomposites. Thus, by comparing the measured functionalities, 4 and 5 wt.% CNT-reinforced Surlyn nanocomposites showed a high potential for various applications due to their high degree of multifunctionality.

Nanoparticulate coatings with efficient up-conversion properties.

Nanoparticulate films with high up-conversion emission (UC) properties were prepared by spray-deposition of nanometer-sized YVO4:Yb,Er particles. The optical properties of YVO4:Yb,Er were optimized upon annealing before the film deposition in order to get the highest possible UC signal in the considered type of system. Thanks to a simple model and some time-resolved spectroscopic investigations, the contribution of the scattering to the UC signal could be separated from the intrinsic properties (crystallinity, surface defects) of the material. The films obtained by this technique present the advantages of having both high UC and good transparency.

Enhanced upconversion multicolor and white light luminescence in SiO2-coated lanthanide-doped GdVO4 hydrothermal nanocrystals.

Tetragonal zircon-type codoped Yb, Ln-GdVO(4) (Ln=Tm, Ho, Er) upconverting nanocrystals with square and rectangular sections were prepared through an efficient low-temperature hydrothermal synthesis. Further processing that combined annealing at 600 °C followed by coating of the surface with a uniform 5 nm-shell of SiO(2) resulted in a significant improvement of the intensity of the upconverted emitted visible light following near-infrared (~980 nm) diode laser excitation with respect to raw hydrothermal nanocrystals. Strong tunable color and bright visible light composed of red-green, blue and green emissions from Ho(3+), Tm(3+) and Er(3+), respectively, were generated by adjusting the Yb-Ln composition of these silica-coated nanocrystals. Based on calculations of CIE color coordinates, nearly ideal white upconversion light was achieved for samples of composition Gd(0.829)Yb(0.15)Tm(0.01)Ho(0.009)Er(0.002)VO(4).