A highly sensitive, long-time stable Ag/AgCl ultra-micro sensor for in situ monitoring chloride ions inside the crevice using SECM.

Tracking the variation of Cl- timely within the crevice is of great significance for comprehending the dynamic mechanism of crevice corrosion. The reported chloride ion selective electrodes are difficult to realize the long-time Cl- detection inside the confined crevice, due to their millimeter size or a relative limited lifespan. For this purpose, an Ag/AgCl ultra-micro sensor (UMS) with a radius of 12.5 µm was fabricated and optimized using laser drawing and electrodeposition techniques. Results show the AgCl film's structure is significantly impacted by the deposited current density, and further affects the linear response, life span and stability of Ag/AgCl UMS. The UMS prepared at current density of 0.1 mA/cm2 for 2 h shows a rapid response (several seconds), excellent stability and reproducibility, strong acid/alkali tolerance, sufficient linearity (R2 > 0.99), and long lifespan (86 days). Moreover, combined with the potentiometric mode of scanning electrochemical microscope (SECM), the Ag/AgCl UMS was successfully applied to monitor the in-situ radial Cl- concentration in micro-regions inside a 100 µm gap of stainless steel. The findings demonstrated that there was obvious radial difference in Cl- concentration inside the crevice, where the fastest rise in Cl- concentration was at the opening. The proposed method which combines the UMS with SECM has attractive practical applications for microzone Cl- monitoring in real time inside crevice. It may further promote the study of other localized corrosion mechanism and the development of microzone ions detection method.

Crevice Corrosion Behavior of 201 Stainless Steel in NaCl Solutions with Different pH Values by In Situ Monitoring.

Crevice corrosion (CC) behavior of 201 stainless steel (SS) in 1 M NaCl + x M HCl/y M NaOH solutions with various pH was investigated using SECM and optical microscopic observations. Results show that the CC was initiated by the decrease in pH value within the crevice. The pH value near the crevice mouth falls rapidly to 1.38 in the first 2 h in the strongly acidic solution, while the pH value was observed to rise firstly and then decrease in the neutral and alkaline solutions. It indicates there is no incubation phase in the CC evolution of 201-SS in a pH = 2.00 solution, while an incubation phase was observed in pH = 7.00 and 11.00 solutions. Additionally, there appeared to be a radial pH variation within the gap over time. The pH value is the lowest at the gap mouth, which is in line with the in situ optical observation result that the severely corroded region is at the mouth of the gap. The decrease in pH value inside results in the negative shift of open circuit potential (OCP) and the initiation of CC of 201-SS. The increased anodic dissolution rate in the acidic solution accelerates the breakdown of passive film inside, reducing the initiation time and stimulating the spread of CC.

Molecular Insights into the Stability of Titanium in Electrolytes Containing Chlorine and Fluorine Ions.

Titanium and its alloys are protected by a compact and stable passive film, which confers resistance to corrosion by the primary halogen chloride (Cl-) while being less effective against fluoride (F-). Although researchers have recognized different macroscopic corrosion effects of these halide ions on titanium, the underlying mechanisms remain largely unexplored. In this work, the bonding of Cl-/F- with stable passive films was studied in neutral and acidic (pH = 2.3) conditions. The synergistic effect between the interfacial hydrogen bond (HB) structure and halogens on titanium corrosion was first revealed using first-principles calculation and Raman spectroscopy. F- forms more stable halogen-Ti bonds than Cl-, resulting in titanium degradation. The proton combined with F- exhibits a specific synergistic effect, causing corrosion of the passive film. The water hydrogen bond transformation index (HBTI) at the titanium/aqueous interface was 1.88 in an acidic solution containing F-, significantly higher than that in neutral/acid solutions containing Cl- (1.80/1.81) and a neutral solution containing F- (1.81). This work clarifies the structure-activity relationship between HBTI and the destruction of titanium passive films. We propose that the microstructure of the interfacial HB is an undeniable factor in the corrosion of titanium.

Insight into oxygen reduction activity and pathway on pure titanium using scanning electrochemical microscopy and theoretical calculations.

HYPOTHESIS: Unlike noble metals, the oxygen reduction reaction (ORR) behavior on Ti is more complicated due to its spontaneously formed oxide film. This film results in sluggish ORR kinetics and tends to be reduced within ORR potential region, causing the weak and multi-reaction coupled current. Though Ti is being used in chemical and biological fields, its ORR research is still underexplored. EXPERIMENTS: We innovatively employed the modified reactive tip generation-substrate collection (RTG/SC) mode of scanning electrochemical microscopy (SECM) with high efficiency of 97.2 % to quantitatively study the effects of film characteristics, solution environment (pH, anion, dissolved oxygen), and applied potential on the ORR activity and selectivity of Ti. Then, density functional theory (DFT) and molecular dynamics (MD) analyses were employed to elucidate its ORR behavior. FINDINGS: On highly reduced Ti, film properties dominate ORR behavior with promoted 4e- selectivity. Rapid film regeneration in alkaline/O2-saturated conditions inhibits ORR activity. Besides, ORR is sensitive to anion species in neutral solutions while showing enhanced 4e- reduction in alkaline media. All the improved 4e- selectivities originate from the hydrogen bond/electrostatic stabilization effect, while the decayed ORR activity by Cl- arises from the suppressed O2 adsorption. This work provides theoretical support and possible guidance for ORR research on oxide-covered metals.

Spectroscopic and Simulation Insights into the Corrosion Mechanism of Sulfite on Titanium.

Ion adsorption and hydrogen bond (HB) network reconstruction in electric double layer (EDL) have a profound impact on the interface properties. The microstructure in the bulk phase of 1.00-21.30 wt.% Na2SO3 aqueous solutions are investigated by X-ray scattering, confocal Raman spectroscopy, and classical molecular dynamics. The electronic properties of SO32- adsorption and the geometric structure of the HB network in the EDL at the titanium TiO2(101) surface are studied by density functional theory (DFT) and classical molecular dynamics. The SO32- strongly weakens the fully hydrogen-bonded water (FHW) and transforms it into partial hydrogen-bonded water (PHW). The HB transformation index (HBTI = PHW/FHW) shows a linear relationship with the mass fraction of Na2SO3. The TiOb-parallel adsorption configuration of SO32- enhances the ionicity of the Ob-Ti6 bond, resulting in the formation of oxygen vacancies at the titanium passive film surface. Besides, SO32- and Na+ are enriched and thermodynamic supersaturated in the inner Helmholtz layer (IHL), and the ions are diluted in the outer Helmholtz layer (OHL). The diffusion coefficient of SO32- and water molecules in EDL decreases seriously, which is easy to causes salt scaling on the surface of titanium passive film. This work provides evidence for the destruction of titanium passive film by SO32-.

Interfacial Adsorption and Electron Properties of Water Molecule/Cluster on Anatase TiO2(101) Surface: Raman and DFT Investigation.

The hydrogen bond network reconstruction at the titanium/water interface was monitored by Raman spectroscopy. In addition, the adsorption properties and the surface electron properties of hydrogen bond cluster (HBC) configurations were analyzed using adsorption energy, work function, Mulliken charge population, and density of states (DOS) by the first-principles method based on density functional theory (DFT). Our results show that the hydrogen bond network of the aqueous solution is reconstructed under the interaction with the anatase TiO2(101) surface with the transformation of the chain and free hydrogen bonds to complex hydrogen bonds. The adsorption energy of a single water molecule and HBC on the anatase TiO2(101) surface are the lowest with the 1-DD-h (-0.851 eV) and 3-D-h-DDA (-1.048 eV) configurations, respectively. Over the long term, artificially regulating the structure of the HBC might be an effective and general way to slow down the metal anodic reaction without surface modification. Furthermore, the surface charge concentrates on the bridging oxygen atom, which will be the active site of the interface reaction. It is helpful to clarify the anodic corrosion reaction mechanism of the titanium spontaneous oxide film/water interface.

Electrochemical observation of individual collision-blocking events of TX-100 nanomicelles: An accurate and universal approach for the critical micelle concentration determination of surfactants.

The electrochemical collision-blocking technique, equipped with the nanoelectrode of Pt was proposed for determination of the critical micelle concentration (CMC) of non-ionic surfactant TX-100. The approach was found on detection of individual collided nanomicelles in amperometric measurements of the oxidation of K4Fe(CN)6 varying the titrated concentration of TX-100 whereas the formed micelles above the CMC stick on the electrode surface during collision to locally block the flux of electroactive species and further to change the faradaic current. The step-like current transients observed in i-t curves have been demonstrated corresponding to electrochemical collision events of individual TX-100 micelles and micelle aggregates by 3D COMSOL simulations. The logarithm relations between the collision frequency of micelle(s) and the concentration of TX-100 were derived by regression analysis to give the corresponding values of CMC in salt solutions. Further, an 'ideal' CMC of TX-100 without influence of additional salts was estimated to be 0.194 mM using the McDevit-Long theory. The more accurate CMC determined in this work has shown less than the previously reported, mainly due to the detection limit for micelle as low as 0.41 fM. Also, we determined the second CMC of 1.21 mM as the first observation of the collision response of micelle aggregates during TX-100 titration. Owing to its analytical characteristics in single-particle tracking and material insensitivity, the approach we proposed is potentially to be a universal tool for accurate determination of CMC of surfactants, and also for studying the formation of polymer particles at a single-particle level, which is not easily accessible using conventional ensemble measurements.

A bistable [2]catenane switched by hetero-radical pairing interactions.

A bistable [2]catenane composed of a tetracationic cyclophane, namely cyclobis(paraquat-p-phenylene) (CBPQT4+) that is mechanically interlocked by a neutral macrocylic component containing both a 1,5-dioxynaphthalene (DNP) and a naphthalene-1,4,5,8-bis(dicarboximide) (NDI) unit, was obtained by using template-directed synthesis via click chemistry. In the fully oxidized state, the CBPQT4+ component encircles the DNP unit, driven by donor-acceptor interactions. Upon reduction of both the CBPQT4+ ring and the NDI unit, the CBPQT2(˙+) ring undergoes shuttling and resides on the NDI˙- station, driven by coulombic-enhanced spin-pairing interactions between different aromatic radicals.

Carboxylate breaks the arene C-H bond via a hydrogen-atom-transfer mechanism in electrochemical cobalt catalysis.

Combined computational and experimental studies elucidated the distinctive mechanistic features of electrochemical cobalt-catalyzed C-H oxygenation. A sequential electrochemical-chemical (EC) process was identified for the formation of an amidylcobalt(iii) intermediate. The synthesis, characterization, cyclic voltammetry studies, and stoichiometric reactions of the related amidylcobalt(iii) intermediate suggested that a second on-cycle electro-oxidation occurs on the amidylcobalt(iii) species, which leads to a formal Co(iv) intermediate. This amidylcobalt(iv) intermediate is essentially a cobalt(iii) complex with one additional single electron distributed on the coordinating heteroatoms. The radical nature of the coordinating pivalate allows the formal Co(iv) intermediate to undergo a novel carboxylate-assisted HAT mechanism to cleave the arene C-H bond, and a CMD mechanism could be excluded for a Co(iii/i) catalytic scenario. The mechanistic understanding of electrochemical cobalt-catalyzed C-H bond activation highlights the multi-tasking electro-oxidation and the underexplored reaction channels in electrochemical transition metal catalysis.

Recent Advances in Scanning Electrochemical Microscopy for Biological Applications.

Scanning electrochemical microscopy (SECM) is a chemical microscopy technique with high spatial resolution for imaging sample topography and mapping specific chemical species in liquid environments. With the development of smaller, more sensitive ultramicroelectrodes (UMEs) and more precise computer-controlled measurements, SECM has been widely used to study biological systems over the past three decades. Recent methodological breakthroughs have popularized SECM as a tool for investigating molecular-level chemical reactions. The most common applications include monitoring and analyzing the biological processes associated with enzymatic activity and DNA, and the physiological activity of living cells and other microorganisms. The present article first introduces the basic principles of SECM, followed by an updated review of the applications of SECM in biological studies on enzymes, DNA, proteins, and living cells. Particularly, the potential of SECM for investigating bacterial and biofilm activities is discussed.

Coulombic-enhanced hetero radical pairing interactions.

Spin-spin interactions between two identical aromatic radicals have been studied extensively and utilized to establish supramolecular recognition. Here we report that spin-pairing interactions could also take place between two different π-electron radicals, namely a bipyridinium radical cation (BPY+•) and a naphthalene-1,8:4,5-bis(dicarboximide) radical anion (NDI─•). The occurrence of this type of previously unreported hetero radical-pairing interactions is attributed to enhancement effect of Coulombic attraction between these two radicals bearing opposite charges. The Coulombic-enhanced hetero radical pairing interactions are employed to drive host-guest recognition, as well as the reversible switching of a bistable [2]rotaxane.

Detection of the short-lived cation radical intermediate in the electrochemical oxidation of N,N-dimethylaniline by scanning electrochemical microscopy.

The short-lived intermediate N,N-dimethylaniline (DMA) cation radical, DMA(•+), was detected during the oxidation of DMA in MeCN with 0.1 M tetra-n-butylammonium hexafluorophosphate. The detection was accomplished at steady state by scanning electrochemical microscopy (SECM) with ultramicroelectrodes using the tip generation/substrate collection mode. Cyclic voltammetry (CV) with a 2 mm Pt electrode indicates that DMA oxidation in acetonitrile is followed by a dimerization and two electrochemical reactions, which is consistent with previous results. The DMA(•+) intermediate is detected by SECM, where the DMA(•+) generated at the ca. 500 nm radius Pt tip is collected on a 5 µm radius Pt substrate when the gap between the tip and the substrate is a few hundred nanometers. Almost all of the DMA(•+) is reduced at the substrate when the gap is 200 nm or less, yielding a dimerization rate constant of 2.5 × 10(8) M(-1)·s(-1) based on a simulation. This is roughly 3 orders of magnitude larger than the value estimated by fast-scan CV. We attribute this discrepancy to the effects of double-layer capacitance charging and adsorbed species in the high scan rate CV.

Pentadecatungstotrivanadodiphosphoric heteropoly acid with Dawson structure: Synthesis, conductivity and conductive mechanism.

A general strategy in terms of degradating and ion-exchange synthesis was used to design pentadecatungstotrivanadodiphosphoric heteropoly acid H(9)P(2)W(15)V(3)O(62)·28H(2)O with Dawson structure and excellent conductivity. The product was characterized by ICP-MS, IR, UV, XRD, (31)P NMR, TG-DTA and electrochemical impedance spectroscopy (EIS). The results indicate that H(9)P(2)W(15)V(3)O(62)·28H(2)O possesses the Dawson structure. EIS measurements show a high conductivity (3.64 × 10(-2) S cm(-1) at 26 °C and 75% relative humidity), with an activation energy of 31.34 kJ mol(-1) for proton conduction. Its mechanism for proton conduction is the Vehicle mechanism.

Synthesis and electrochemical properties of substituted heteropoly acid with Dawson structure H7[In(H2O)P2W17O61]·23H2O.

A new solid high-proton conductor, substituted heteropoly acid with Dawson structure H(7)[In(H(2)O)P(2)W(17)O(61)]·23H(2)O, has been synthesized by the degradation/ion exchange/freezing method. The pH of the synthesis reaction was given. The product was characterized by chemical analysis, IR, UV, XRD and TG-DTA. The determination of conductivity shows that H(7)[In(H(2)O)P(2)W(17)O(61)]·23H(2)O is an excellent solid high-proton conductor with conductivity of 1.34 × 10(-3) S cm(-1) at 18 °C, and 70% relative humidity (RH). Its activation energy is 37.72 kJ mol(-1), which suggests that its mechanism of proton conduction is the Vehicle mechanism.