Achieving advanced nitrogen removal with anammox and endogenous partial denitrification driven by efficient hydrolytic fermentation of slowly-biodegradable organic matter.

Anammox-based processes are pivotal for elevating nitrogen removal efficiency in municipal wastewater treatment. This study established a novel HF-EPDA system combined in-situ hydrolytic fermentation (HF) with endogenous partial denitrification (EPD) and anammox. Slowly-biodegradable organic matter (SBOM) was degraded and transformed into endogenous polymers for driving production of sufficient nitrite by EPD, further promoted the nitrogen removal via anammox process. Processes above formed positive feedback, guaranteeing the robustness and recoverability of system. After a 92-day suspension during operation, advanced nitrogen removal was still achieved with excellent nitrogen removal efficiency of 95.84 ± 1.73 %, treating with actual domestic wastewater and synthetic nitrate wastewater. Candidatus Brocadia and Candidatus Competibacter were dominant bacteria on biofilms responsible for the anammox and EPD process respectively, while the main hydrolytic fermentation organisms norank_o SBR1031 was enriched in floc sludge. This study highlights the reliable potential for expanding anammox application with simultaneous improvement of SBOM utilization.

A Dataset of Distribution and Characterization of Underground Wastewater Treatment Plants in China.

Underground wastewater treatment plants (U-WWTPs) have emerged as a novel paradigm for urban wastewater pollutants management, offering benefits such as alleviating the Not-in-my-backyard (NIMBY) effect and utilizing land resources efficiently. China stands at the forefront, witnessing swift advancements in U-WWTP technology and deployment. However, the absence of a thorough understanding of their geographical distribution and operational characteristics could lead to misaligned planning and construction, resulting in inefficient resource allocation and treatment capacities for urban wastewater treatment. This dataset provides an up-to-date overview of the spatial distribution, process selection, and discharge standards for all U-WWTPs in China (with a total number of 201) constructed since 1995. To enhance comparative analysis, the dataset has been supplemented with information on conventional aboveground wastewater treatment plants (A-WWTPs), comprising a total of 2464 records, which enriches a more comprehensive evaluation of different wastewater treatment approaches. Utilizing this dataset can provide essential data support for the strategic management of urban wastewater systems and serve as a valuable reference for the paradigmatic renovation of existing wastewater treatment plants.

Food wastewater treatment using a hybrid biofilm reactor: nutrient removal performance and functional microorganisms on filler biofilm and suspended sludge.

In this study, a laboratory-scale hybrid biofilm reactor (HBR) was constructed to treat food wastewater (FWW) before it is discharged into the sewer. The chemical oxygen demand (COD) of 29 860 mg L-1 in FWW was degraded to 200-350 mg L-1 using the HBR under the operating parameters of COD load 1.68 kg m-3 d-1, hydraulic retention time (HRT) of 426.63 h, dissolved oxygen (DO) of 8-9 mg L-1, and temperature of 22-23 °C. The biomass of biofilm on the surface of filler was 2.64 g L-1 for column A and 0.91 g L-1 for column O. Microbial analysis revealed richer and more diverse microorganisms in filler biofilms compared to those in suspended sludge. The hybrid filler was conducive to the development of functional microbial species, including phyla Firmicutes, Actinobacteriota, and Chloroflexi, and genus level norank_f_JG30-KF-CM45, which will improve FWW treatment efficiency. Moreover, the microorganisms on the filler biofilm had more connections and relationships than those in the suspended sludge. The combination of an up-flow anaerobic sludge bed (UASB) and HBR was demonstrated to be an economical strategy for practical applications as a shorter HRT of 118.34 h could be obtained. Overall, this study provides reliable data and a theoretical basis for the application of HBR and FWW treatments.

Evolution and health risk of indicator microorganisms in landscape water replenished by reclaimed water.

As an important means to solve water shortage, reclaimed water has been widely used for landscape water supply. However, with the emergence of large-scale epidemic diseases such as SARS, avian influenza and COVID-19 in recent years, people are increasingly concerned about the public health safety of reclaimed water discharged into landscape water, especially the pathogenic microorganisms in it. In this study, the water quality and microorganisms of the Old Summer Palace, a landscape water body with reclaimed water as the only replenishment water source, were tracked through long-term dynamic monitoring. And the health risks of indicator microorganisms were analyzed using Quantitative Microbial Risk Assessment (QMRA). It was found that the concentration of indicator microorganisms Enterococcus (ENT), Escherichia coli (EC) and Fecal coliform (FC) generally showed an upward trend along the direction of water flow and increased by more than 0.6 log at the end of the flow. The concentrations of indicator microorganisms were higher in summer and autumn than those in spring. And there was a positive correlation between the concentration of indicator microorganisms and COD. Further research suggested that increased concentration of indicator microorganisms also led to increased health risks, which were more than 30% higher in other areas of the park than the water inlet area and required special attention. In addition, (water) surface operation exposure pathway had much higher health risks than other pathways and people in related occupations were advised to take precautions to reduce the risks.

Spatially-assembled binary carbon anode synergizing directional electron transfer and enriched microbe accommodation for wastewater treatment and energy conversion: From simulation to experiments.

Bioelectrochemical systems (BESs) hold prospects in wastewater energy and resource recovery. Anode optimization is important for simultaneous enhancement of wastewater energy conversion and effluent quality in BESs. In this study, a multi-physics model coupling fluid flow, organic degradation and electrochemical process was constructed to guide the design and optimization of BES anodes. Based on the multi-physics simulation, spatially-assembled binary carbon anodes composed of three-dimensional carbon mesh skeleton and granular activated carbon were proposed and established. The granular activated carbon conducive to microbe accommodation played a vital role in improving effluent water quality, while the carbon mesh skeleton favoring electron collection and transfer could enhance the bioelectricity output. With an average chemical oxygen demand (COD) removal rate of 0.442 kg m-3 d-1, a maximum power density of 20.6 W m-3 was achieved in the optimized composite anode BES, which was 25% and 154% higher than carbon mesh skeleton BES and granular activated carbon BES. Electroactive bacteria were enriched in composite anodes and performed important functions related to microbial metabolism and energy production. The spatially-assembled binary carbon anode with low carbon mesh packing density was more cost-effective with a daily energy output per anode cost of 221 J d-1 RMB-1. This study not only provides a cost-efficient alternative anode to simultaneously improve organic degradation and power generation performance, but also demonstrates the potential of multi-physics simulation in offering theoretical support and prediction for BES configuration design as well as optimization.

Self-Powered Wireless Temperature and Vibration Monitoring System by Weak Vibrational Energy for Industrial Internet of Things.

Developing self-powered smart wireless sensor networks by harvesting industrial environmental weak vibration energy remains a challenge and an impending need for enabling the widespread rollout of the industrial internet of things (IIoT). This work reports a self-powered wireless temperature and vibration monitoring system (WTVMS) based on a vibrational triboelectric nanogenerator (V-TENG) and a piezoelectric nanogenerator (PENG) for weak vibration energy collection and information sensing. Therein, the V-TENG can scavenge weak vibration energy down to 80 µm to power the system through a power management module, while the PENG is able to supply the frequency signal to the system by a comparison circuit. In an industrial vibration environment where the vibration frequency and amplitude are 20 Hz and 100 µm, respectively, the WTVMS can upload temperature and frequency information on the equipment to the cloud in combination with the narrowband IoT technology to realize real-time information monitoring. Furthermore, the WTVMS can work continuously for more than 2 months, during which the V-TENG can operate up to 100 million cycles, achieving ultrahigh stability and durability. By integrating weak vibration energy harvesting and active sensing technology, the WTVMS can be used for real-time online monitoring and early fault diagnosis of vibration equipment, which has great application prospects in industrial production, machinery manufacturing, traffic transportation, and intelligent IIoT.

Step-feeding food waste fermentation liquid as supplementary carbon source for low C/N municipal wastewater treatment: Bench scale performance and response of microbial community.

Municipal wastewater treatment often lacks carbon source, while carbon-rich organics in food waste are deficiently utilized. In this study, the food waste fermentation liquid (FWFL) was step-fed into a bench-scale step-feed three-stage anoxic/aerobic system (SFTS-A/O), to investigate its performance in nutrients removal and the response of microbial community as a supplementary carbon source. The results showed that the total nitrogen (TN) removal rate increased by 21.8-109.3% after step-feeding FWFL. However, the biomass of the SFTS-A/O system was increased by 14.6% and 11.9% in the two phases of the experiment, respectively. Proteobacteria was found to be the dominant functional phyla induced by FWFL, and the increase of its abundance attributed to the enrichment of denitrifying bacteria and carbohydrate-metabolizing bacteria was responsible for the biomass increase. Azospira belonged to Proteobacteria phylum was the dominant denitrifying genera when step-fed with FWFL, its abundance was increased from 2.7% in series 1 (S1) to 18.6% in series 2 (S2) and became the keystone species in the microbial networks. Metagenomics analysis revealed that step-feeding FWFL enhanced the abundance of denitrification and carbohydrates-metabolism genes, which were encode mainly by Proteobacteria. This study constitutes a key step towards the application of FWFL as a supplementary carbon source for low C/N municipal wastewater treatment.

Sequentially modified carbon felt for enhanced p-nitrophenol biodegradation through direct interspecific electron transfer.

The widely applied aromatic nitration in modern industry leads to toxic p-nitrophenol (PNP) in environment. Exploring its efficient degradation routes is of great interests. In this study, a novel four-step sequential modification procedure was developed to increase the specific surface area, functional group, hydrophilicity, and conductivity of carbon felt (CF). The implementation of the modified CF promoted reductive PNP biodegradation, attaining 95.2 ± 0.8% of removal efficiency with less accumulation of highly toxic organic intermediates (e.g., p-aminophenol), compared to carrier-free and CF-packed biosystems. The constructed anaerobic-aerobic process with modified CF in 219-d continuous operation achieved further removal of carbon and nitrogen containing intermediates and partial mineralization of PNP. The modified CF promoted the secretion of extracellular polymeric substances (EPS) and cytochrome c (Cyt c), which were essential components to facilitate direct interspecies electron transfer (DIET). Synergistic relationship was deduced that glucose was converted into volatile fatty acids by fermenters (e.g., Longilinea and Syntrophobacter), which donated electrons to the PNP degraders (e.g., Bacteroidetes_vadinHA17) through DIET channels (CF, Cyt c, EPS) to complete PNP removal. This study proposes a novel strategy using engineered conductive material to enhance the DIET process for efficient and sustainable PNP bioremediation.

A hybrid fluidized-bed reactor (HFBR) based on arrayed ceramic membranes (ACMs) coupled with powdered activated carbon (PAC) for efficient catalytic ozonation: A comprehensive study on a pilot scale.

Taking advantage of the high mass transfer in the bulk solution of fluidized-bed reactor (FBR), and the benefits of simultaneous particle separation and ozone catalysis on ceramic membranes, we proposed a hybrid fluidized-bed reactor (HFBR) based on arrayed ceramic membranes (ACMs) coupled with powdered activated carbon (PAC) for efficient catalytic ozonation. The optimum HFBR performance on a pilot scale was found at PAC addition of 3 g/L, ozone dosage of 25 mg/L, hydraulic retention time of 60 min and auxiliary aeration strength of 5 m3/h. During the 30-day treatment of coal-gasification secondary effluent (200 L/h), the HFBR system revealed not only a 117% increase in ozone utilization efficiency (ΔCOD/ΔO3) upon pure ozonation but also a highly purified effluent with better sterilization and low residual bromate (∼11 µg/L). Low-molecular-weight organic fragments and acids, as well as phthalate esters were identified as the main products in this process. By density functional theory (DFT) calculations, it was found the main functional groups (carbonyls, -C=O) on the PAC could be protected from direct ozonation in the presence of ozone-degradable organics (e.g. phenolic and aliphatic compounds) in the wastewater through an ozone-competing reaction, which prevented the rapid inactivation of the PAC in catalytic ozonation. A longer service life and cheaper materials for ceramic membranes would benefit low operation costs for the HFBR. Moreover, the addition of PAC could greatly reduce ozone demand by ∼60% in the HFBR, and therefore decrease energy consumption by ∼30%. Hence, the HFBR was proved to be a highly competitive technology for wide application in the near future.

Ni-Induced C-Al2O3-Framework (NiCAF) Supported Core-Multishell Catalysts for Efficient Catalytic Ozonation: A Structure-to-Performance Study.

During catalytic ozonation, Al2O3-supported catalysts usually have stable structures but relatively low surface activity, while carbon-supported catalysts are opposite. To encourage their synergisms, we designed a Ni-induced C-Al2O3-framework (NiCAF) and reinforced it with a Cu-Co bimetal to create an efficient catalyst (CuCo/NiCAF) with a core-multishell structure. The partial graphitization of carbon adjacent to Ni crystals formed a strong out-shell on the catalyst surface. The rate constant for total organic carbon removal of CuCo/NiCAF (0.172 ± 0.018 min-1) was 67% and 310% higher than that of Al2O3-supported catalysts and Al2O3 alone, respectively. The metals on CuCo/NiCAF contributed to surface-mediated reactions during catalytic ozonation, while the embedded carbon enhanced reactions within the solid-liquid boundary layer and in the bulk solution. Moreover, carbon embedment provided a 76% increase in ·OH-production efficiency and an 86% increase in organic-adsorption capacity compared to Al2O3-supported catalysts. During the long-term treatment of coal-gasification wastewater (∼5 m3 day-1), the pilot-scale demonstration of CuCo/NiCAF-catalyzed ozonation revealed a 120% increase in ozone-utilization efficiency (ΔCOD/ΔO3 = 2.12) compared to that of pure ozonation (0.96). These findings highlight catalysts supported on NiCAF as a facile and efficient approach to achieve both high catalytic activity and excellent structural stability, demonstrating that they are highly viable for practical applications.

Carbonization and activation of inexpensive semicoke-packed electrodes to enhance power generation of microbial fuel cells.

A simple and low-cost modification method was developed to improve the power generation performance of inexpensive semicoke electrode in microbial fuel cells (MFCs). After carbonization and activation with water vapor at 800-850 °C, the MFC with the activated coke (modified semicoke) anode produced a maximum power density of 74 Wm(-3) , 17 Wm(-3) , and 681 mWm(-2) (normalized to anodic liquid volume, total reactor volume, and projected membrane surface area, respectively), which was 124 % higher than MFCs using a semicoke anode (33 Wm(-3) , 8 Wm(-3) , and 304 mWm(-2) ). When they were used as biocathode materials, activated coke produced a maximum power density of 177 Wm(-3) , 41 Wm(-3) , and 1628 mWm(-2) (normalized to cathodic liquid volume, total reactor volume, and projected membrane surface area, respectively), which was 211 % higher than that achieved by MFCs using a semicoke cathode (57 Wm(-3) , 13 Wm(-3) , and 524 mWm(-2) ). A substantial increase was also noted in the conductivity, C/O mass ratio, and specific area for activated coke, which reduced the ohmic resistance, increased biomass density, and promoted electron transfer between bacteria and electrode surface. The activated coke anode also produced a higher Coulombic efficiency and chemical oxygen demand removal rate than the semicoke anode.

Use of inexpensive semicoke and activated carbon as biocathode in microbial fuel cells.

In this study, two inexpensive semicoke and activated carbon packed bed biocathode were developed for oxygen reduction in microbial fuel cells (MFCs). These two materials were compared with two commonly used biocathode materials graphite and carbon felt in terms of material characteristic, power density, biomass density and price-performance ratio. MFCs with semicoke and activated carbon biocathode produced a maximum power density of 20.1 W/m3 (normalized liquid volume in cathodic compartment) and 24.3 W/m3, respectively, compared to 14.1 and 17.1 W/m3 obtained by MFCs with graphite and carbon felt biocathode, respectively. The bacteria attached on biocathode played a major role in oxygen reduction for all the materials investigated. The material cost per Watt produced for semicoke and activated carbon biocathode is only 2.8% and 22.7% of that for graphite biocathode, respectively. These two inexpensive carbon materials, especially semicoke, are very cost-effective biocathode materials for future large scale MFCs.

Stacked microbial desalination cells to enhance water desalination efficiency.

Microbial desalination cell (MDC) is a new method to obtain clean water from brackish water using electricity generated from organic matters by exoelectrogenic bacteria. Anions and cations, derived from salt solution filled in the desalination chamber between the anode and cathode, move to the anode and cathode chambers under the force of electrical field, respectively. On the basis of the primitive single-desalination-chambered MDC, stacked microbial desalination cells (SMDCs) were developed in order to promote the desalination rate in the present study. The effects of desalination chamber number and external resistance were investigated. Results showed that a remarkable increase in the total desalination rate (TDR) could be obtained by means of increasing the desalination cell number and reducing the external resistance, which caused the charge transfer efficiency increased since the SMDCs enabled more pairs of ions separated while one electron passed through the external circuit. The maximum TDR of 0.0252 g/h was obtained using a two-desalination-chambered SMDC with an external resistance of 10 Ω, which was 1.4 times that of single-desalination-chambered MDC. SMDCs proved to be an effective approach to increase the total water desalination rate if provided a proper desalination chamber number and external resistance.

Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells.

Carbon nanotube (CNT) is a promising electrode material and has been used as an anode modifier in microbial fuel cells (MFCs). In this study, a new method of simultaneously adding CNT powders and Geobacter sulfurreducens into the anode chamber of a MFC was used, aiming to form a composite biofilm on the anode. The performance of MFCs such as startup time and steady-state power generation was investigated under conditions of different CNT powders dosages. Results showed that both the startup time and the anodic resistance were reduced. The optimal dosage of CNT powders pre-treated by acid was 4 mg/mL for the anode chamber with an effective volume of 25 mL. The anodic resistance and output voltage of the MFC with CNT powders addition were maintained around 180 Ω and 650 mV during 40 days operation, while those of the MFC without CNT powders addition increased from 250 Ω to 540 Ω and decreased from 630 mV to 540 mV, respectively, demonstrating that adding CNT powders helped stabilize the anodic resistance, thus the internal resistance and power generation during long-term operation. Based on cyclic voltammogram, the electrochemical activity of anodic biofilm was enhanced by adding CNT powders, though no significant increase of the biomass in anodic biofilm was detected by phospholipids analysis. There was no remarkable change of ohmic resistance with an addition of CNT powders revealed by current interrupt method, which indicated that the rate of mass transfer might be promoted by the presence of CNT powders.

[Biocathode denitrification in a two-columnar microbial fuel cell].

The biocathode of the two-columnar microbial fuel cell was used to denitrify. Factors influencing denitrification performance and power production were studied. When the external resistance decreased from 50 omega to 5 omega, the nitrate removal rate increased from 0.26 mg/(L x h) to 0.76 mg/(L x h). The nitrite accumulated to 55 mg/L with the external resistance decreasing to 5 omega. The nitrate degradation followed the zero order reaction model when the initial nitrate concentration was 20-120 mg/L. The power generation was not affected by the nitrate concentration distinctly. The nitrite concentration increased with the initial nitrate concentration. The nitrite removal could be enhanced by adding organic matter, without significant influence on the power generation.

Electricity generation from glucose by a Klebsiella sp. in microbial fuel cells.

As electrochemically active bacteria play an important role in microbial fuel cells (MFCs), it is necessary to get a comprehensive understanding of their electrogenesis mechanisms. In this study, a new electrochemically active bacterium, Klebsiella sp. ME17, was employed into an "H" typed MFC for electrogenesis, with glucose as the electron donor. The maximum power density was 1,209 mW/m2 at a resistance of 340 Omega and the maximum current was 1.47 mA. Given the original anode medium, fresh medium, and the supernatant of the anode medium in the same MFC, respectively, the polarization curves illustrated that the strain produced mediators to promote extracellular electron transfer. The anode medium supernatant was electrochemically active, based on cyclic voltammogram, and the supernatant was very likely to contain quinone-like substances, as indicated by spectrophotometric and excitation-emission matrix fluorescence spectroscopy analysis. Further investigation on the color and ultraviolet absorbance at 254 nm of the filtered anode medium showed that the redox states of mediators strongly associated with the electricity generation states in MFCs.

A new insight into potential regulation on growth and power generation of Geobacter sulfurreducens in microbial fuel cells based on energy viewpoint.

The anode potential in microbial fuel cells (MFCs) defines the possible metabolic energy gain (PMEG) for the bacteria growth. This study focused on the mechanism behind anode potential controlling microbial growth and power generation in MFCs from an energy perspective. Four sets of MFCs were operated with varied conditions: three with different applied anode potential (-160, 0, and 400 mV vs standard hydrogen electrode (SHE)) and one with an external resistor (500 Omega). A model strain Geobacter sulfurreducens was used here. The evolution of biomass was measured and its quantitative relationship with PMEG was analyzed. Linear voltammetry and cyclic voltammetry were also carried out. Results indicated a notable gain in biomass and power density when anode potential increased from -160 to 0 mV. However, no gain in biomass and power generation was detected when anode potential further increased to 400 mV. At anode potential of 0 mV and below, G. sulfurreducens extracted a significant portion of PMEG for growth, while utilization of PMEG significantly decreased at 400 mV. Furthermore, the anode potential has a minor influence on individual G. sulfurreducens cell activity, and the maximum power density of MFC proportionate to biomass.

A new method for water desalination using microbial desalination cells.

Current water desalination techniques are energy intensive and some use membranes operated at high pressures. It is shown here that water desalination can be accomplished without electrical energy input or high water pressure by using a source of organic matter as the fuel to desalinate water. A microbial fuel cell was modified by placing two membranes between the anode and cathode, creating a middle chamber for water desalination between the membranes. An anion exchange membrane was placed adjacent to the anode, and a cation exchange membrane was positioned next to the cathode. When current was produced by bacteria on the anode, ionic species in the middle chamber were transferred into the two electrode chambers, desalinating the water in the middle chamber. Proof-of-concept experiments for this approach, using what we call a microbial desalination cell (MDC), was demonstrated using water at different initial salt concentrations (5, 20, and 35 g/L) with acetate used as the substrate for the bacteria. The MDC produced a maximum of 2 W/m2 (31 W/m3) while at the same time removing about 90% of the salt in a single desalination cycle. As the salt was removed from the middle chamber the ohmic resistance of the MDC (measured using electrochemical impedance spectroscopy) increased from 25 Omega to 970 Omega at the end of the cycle. This increased resistance was reflected by a continuous decrease in the voltage produced over the cycle. These results demonstrate for the first time the possibility for a new method for water desalination and power production that uses only a source of biodegradable organic matter and bacteria.

[Influence of environmental factors on electricity production by microbial fuel cell inoculation Shewanella baltica].

The influences of the anodic substance, concentration, pH and temperature on the electricity production by MFCs were discussed. The lactic sodium was better than acetic sodium or glucose. The power density of MFC and the concentration of lactic sodium were well filled with Monod model. The power density was 1236 mW/m2 when the pH of anodic chamber was 8. The power density of MFC increased with the pH increasing from 6 to 8, which was due to the anodic internal resistance. The power density was 1 197 mW/m2 when the temperature was 50 degrees C. The power density of MFC changed with temperature because the anodic resistance decreased with the temperature increasing. While the temperature changed from 20 degrees C to 50 degrees C, the current density and the temperature were well filled in Arrhenius equation.

[Characteristic in electricity-generation and wastewater-treatment by the two-cylinder microbial fuel cells].

A two-cylinder MFC, which is of new configuration, was constructed to study its power generation and waste water treatment performance. When the graphite granule was used in anode as packing material, the internal resistance was 38.9 Omega. The anodic resistance, ohmic resistance and the cathodic resistance were 5.1, 14.1 and 18.7 Omega respectively. The maximal power density was 6,253 mW/m3. When the concentration of COD was higher than 1,000 mg/L, the removal load was 1.6 kg/(m3 x d) and the columbic efficient was 10%-12%. When the graphite granule with the diameter of 6 mm, the graphite granule with the diameter of 3 mm, carbon felt and the improved carbon felt were used as anode packing materials, the MFCs' resistances were 47, 39, 28 and 33 Omega and the stabilization cycles were 20, 18, 11 and 18 d, respectively. Considering steadily performance, the improved carbon felt and the graphite granule with diameter of 3 mm are more suitable as anode packing material.