Effect of Spirulina in Bread Formulated with Wheat Flours of Different Alveograph Strength.

Consumers within the EU are increasingly asking for natural and healthier food products, which are additive-free and environmentally friendly. The aim of this study was to assess the effects of Spirulina (Arthrospira sp.) in bread formulated with four wheat flours with different alveograph strengths. The flours used were Manitoba Flour (00/251), Ground-force wholemeal (Whole/126), Standard Bakery Flour (0/W105), and Organic Bakery Flour (2/W66). Powdered Spirulina biomass was used as a new ingredient with a high nutritional profile and bioactive compounds; incorporation was made at two levels: 1.5% and 2.5% of the flour amount. The same bread recipe was used for all formulations, but for the 1.5 and 2.5% variations, 6 g and 10 g of Spirulina were added, respectively. Antioxidant capacity increased with increasing microalgal biomass. The visual and taste attributes of the breads with microalgae underwent noticeable changes compared to their counterparts without microalgae. Biomass addition significantly (p < 0.05) affected bread weight and volume, and different trends were found based on the type of wheat flour. Spirulina-containing breads showed a greener coloration while the microalgae concentration was augmented. The moisture and texture were slightly affected by the addition of the biomass at both levels. The 2.5% concentration samples were well accepted in most cases by consumers, emphasizing the salty flavor as a pleasant feature. No significant sensory differences were observed between samples, and the acceptability index was always higher than 72%. The results show that Spirulina could be an environmentally friendly ingredient for the reformulation of nutritionally enhanced bread with a good texture that is well-accepted by consumers.

Impact of Raw, Roasted and Dehulled Chickpea Flours on Technological and Nutritional Characteristics of Gluten-Free Bread.

The main objective of this study was to develop a healthy rice-based gluten-free bread by using raw, roasted, or dehulled chickpea flours. All breads containing chickpea flours showed a darker crust and were characterized by an alveolar (porosity 41.5-51.4%) and soft crumb (hardness 5.5-14.1 N). Roasted chickpea flour bread exhibited the highest specific volume, the softest crumb, and the slowest staling rate. Enriching rice-based breads with the chickpea flours resulted in increased protein (from 9.72 to 12.03-13.21 g/100 g dm), ash (from 2.01 to 2.45-2.78 g/100 g dm), fat (from 1.61 to 4.58-5.86 g/100 g), and total phenolic contents (from 49.36 up to 80.52 mg GAE/100 g dm), and in reduced (~10-14% and 13.7-17%, respectively) available starch levels and rapidly digestible starch compared to rice bread. Breads with roasted chickpea flour also showed the highest in vitro protein digestibility. The results of this study indicated that the enrichment of rice-based gluten-free breads with chickpea flours improved the technological and nutritional quality of the breads differently according to the processed chickpea flour used, also allowing recovery of a waste product.

5-Hydroxymethylfurfural Formation in Bread as a Function of Heat Treatment Intensity: Correlations with Browning Indices.

5-hydroxymethylfurfural (HMF) is formed during bread baking as a Maillard reaction product (MRP); it can exert toxicity and it is regarded as a potential health risk because of its high consumption levels in western diets. The aim of this study was to evaluate HMF formation in bread as a function of heat treatment intensity (HTI) and to investigate correlations between HMF and easily detectable browning indices. White breads were baked at 200 °C and 225 °C for different baking times for a total of 24 baking trials. Browning development was evaluated by reflectance colorimetric and computer vision colour analysis; MRP were quantified spectrophotometrically at 280, 360 and 420 nm and HMF was determined by HPLC. HMF concentrations varied from 4 to 300 mg/kg dw. Colour indices (100-L*) and Intensity mean resulted significantly correlated between each other (r = -0.961) and with MRP (r ≥ 0.819). The effects of the different HTI were visualized by principal component analysis and the data were used to evaluate the best fitting regression models between HMF concentration and other browning indices, obtaining models with high correlation coefficients (r > 0.90).

Effects of Red Rice or Buckwheat Addition on Nutritional, Technological, and Sensory Quality of Potato-Based Pasta.

This work investigates the effects of red rice (R) or buckwheat (B) flour addition on nutritional, technological, and sensory quality of potato-based pasta (gnocchi). Three gluten-free (GF) and three conventional (C) samples were produced in an industrial line without any addition or with 20% R or B. R and B addition significantly (p < 0.05) reduced starch content and increased fat amount and ready digestible starch fraction (potential higher glycemic impact). R addition significantly (p < 0.05) worsened GF pasta structure, increasing solid loss in cooking water (5.4 ± 1.2 vs. 4.1 ± 0.5 g/100 g pasta) and reducing product firmness (408 ± 13 vs. 108 ± 2 N). B addition resulted in intermediate consistency (243 ± 8 N), despite the highest total fiber content and weight increase during cooking. Similar trends were found in C samples, indicating a better texturizing capacity of B in comparison to R. Samples without any addition were the most liked (C = 67.4 and GF = 60.6). Texture was the major contributor to liking: uniform structure and firm texture were positive predictors of liking, whereas a granular and coarse matrix contributed negatively. The outcomes of this research can be useful in developing GF potato-based pasta for consumers focused on healthier foods and for industries willing to better valorize their products.

Influence of Cooking Conditions on Nutritional Properties and Sensory Characteristics Interpreted by E-Senses: Case-Study on Selected Vegetables.

This study investigates the effects of three cooking methods (boiling, steaming and microwaving) on the nutritional and physical properties of cauliflowers, carrots and sweet potatoes; e-senses were applied to interpret the sensory characteristics according to physico-chemical aspects. The nutritional quality was evaluated by determining the concentrations of key components and the antioxidant activity; e-sense data, combined with texture parameters, were processed by a principal component analysis. The cooking method and time significantly influenced the quality of the three products. Boiling, which detrimentally affected ascorbic acid, total phenolic concentration and antioxidant activity, enhanced carotene accessibility. Steaming produced losses in ascorbic acid, increasing total phenolics and carotenoids. Microwaving resulted in minor changes in ascorbic acid concentrations, preserved carotenoids and increased total phenolics. The nutritional quality was better preserved or enhanced using shorter cooking times. The elaboration of the data collected by the e-senses showed a clear evolution according to the cooking method and time. The results helped to determine the cooking method that best preserves the nutritional properties of the vegetables, highlighting the applicability of rapid instrumental methods to interpret the evolution of sensory characteristics.

Zymomonas mobilis in Bread Dough: Characterization of Dough Leavening Performance in Presence of Sucrose.

Zymomonas mobilis, because of its fermentative metabolism, has potential food applications in the development of leavened baked goods consumable by people with adverse responses to Saccharomyces cerevisiae. Since Z. mobilis is not able to utilize maltose present in flour, the effect of sucrose addition (2.5 g/100 g flour) on bread dough leavening properties was studied. For comparison purposes, leavening performances of S. cerevisiae with and without sucrose were also investigated. Doughs leavened by Z. mobilis without sucrose addition showed the lowest height development (14.95 ± 0.21 mm) and CO2 production (855 ± 136 mL). When sucrose was added, fermentative performances of Z. mobilis significantly (p < 0.05) improved (+80% and +85% of gas production and retention, respectively), with a dough maximum height 2.6 times higher, results indicating that Z. mobilis with sucrose can be leavened in shorter time with respect to the sample without addition. S. cerevisiae did not benefit the sucrose addition in terms of CO2 production and retention, even if lag leavening time was significantly (p < 0.05) shorter (about the half) and time of porosity appearance significantly (p < 0.05) longer (about 26%) with respect to S. cerevisiae alone. Results demonstrate that in the presence of sucrose, Z. mobilis can efficiently leaven a bread dough, thus providing innovation possibilities in the area of yeast-free leavened products.

Baking performance of 25 edible dry bean powders: Correlation between cookie quality and rapid test indices.

This study was designed to evaluate the baking performances of 25 edible dry bean (Phaseolus vulgaris L.) varieties and to investigate correlations among cookie features and rapid test indices (i.e., water and lactic acid retention capacities, oil binding capacity and Rapid Visco Analyzer indices). Two bean powder particle sizes (≤0.5 mm, ≤1.0 mm) were investigated. Cookies were evaluated in terms of nutritional, geometrical and textural properties. Bean powders doubled the amount of cookie protein and increased cookie resistant starch content. Baking potential varied according to bean genotype and powder particle size: coarse powders resulted in larger (+26%) and thinner (-19%) cookies characterized by easier breaking texture (fracture strengths of 41-157 vs. 48-226 kPa for fine powders). Water retention and oil binding capacities and pasting properties significantly (p < 0.05) correlated with cookie features. In conclusion, these accumulated findings can be used in designing value-added traditional and gluten-free cookies.

A modified mid-level data fusion approach on electronic nose and FT-NIR data for evaluating the effect of different storage conditions on rice germ shelf life.

Evaluating the possibility of extending shelf life of rice germ (a by-product of rice milling process) by reducing water activity in combination with storage atmosphere packaging, without any heat treatment, is the aim of the present study. Samples at different water activities (0.55, 0.45 and 0.36) were packed in air, argon or under vacuum, and stored at 27 °C for 150 days. To the aim, a non-targeted approach was applied by means of an FT-NIR spectrometer in reflectance with a rotating sample holder and a portable electronic nose, equipped with 10 non-specific sensors. For understanding the impact of the factors under study on the rice germ shelf life, a modified mid-level data fusion approach was applied to enhance the information most correlated with time. Moreover, Principal Component Analysis was applied on fused data to follow samples evolution during storage and identify different clusters according to the storage conditions. The rice germ case study allowed to better understand the information captured by the non-specific sensors: a 2D correlation map was developed combining the e-nose data with the NIR spectral information, highlighting relationships among NIR absorption bands and classes of chemical compounds inducing e-nose responses. A data fusion approach highlighted the importance of water activity on rice germ storage, while no interesting differences were ascribable to storage atmosphere packaging systems. In terms of correlation, the sensors could be divided in two groups, negatively inter-correlated: sensors ascribable to aromatic compounds (WC) and correlated with the NIR band around 4800-4900 cm-1 (N-H bending of primary amides, typical for peptides coming from protein hydrolysis); broad-range response sensors (WS), linked with the NIR band at 5128 cm-1 (second overtone of CO stretching of esters).

Seed characteristics and physicochemical properties of powders of 25 edible dry bean varieties.

Information on the physicochemical variability in dry bean seeds from different varieties grown over distinct crop years is lacking. This study was designed to investigate the relationship between the environment and the seed characteristics of 25 edible dry bean varieties and to expand the knowledge on their proximate composition, starch digestibility, solvent retention capacity, and pasting and thermal properties. The impact of bean genotype (25 varieties), growing environment (two crop years), and powder particle size (≤0.5 mm, ≤1.0 mm) was investigated. Statistical differences (P > 0.05) in seed characteristics and in starch, amylose and protein contents were found among the 25 varieties. Unique pasting and thermal properties were observed, and genotype and particle size greatly affected these properties. The accumulated information can be used in breeding programs to select bean lines possessing unique properties for food ingredients while increasing the market value of the crop and enhancing human health.

Shelf life extension of whole-wheat breadsticks: Formulation and packaging strategies.

The aim of this study was the shelf life extension of whole-wheat breadsticks through the addition of a rosemary extract and packaging under nitrogen. Shelf life was studied at four temperatures (20, 27, 35, 48°C) for up to 200 storage days. The minimal changes observed in moisture, water activity and texture of the samples, coupled with the high peroxide values (13-539meqO2/kgfat) measured at the end of storage, and the exponential increase of hexanal concentrations (up to 13-34mg/kg) confirmed that quality decay of whole-wheat breadsticks is mainly associated to lipid oxidation. The kinetic study of oxidation development and the consumer sensory acceptance determined by the survival analysis demonstrated that the rosemary extract addition yields a 42% shelf life extension, higher than that observed using nitrogen in the package (24-29%). The combination of the formulation and packaging strategies gave the best result (83% shelf life extension at 25°C).

Gluten-Free Bread: Influence of Sourdough and Compressed Yeast on Proofing and Baking Properties.

The use of sourdough is the oldest biotechnological process to leaven baked goods, and it represents a suitable technology to improve traditional bread texture, aroma, and shelf life. A limited number of studies concerning the use of sourdough in gluten-free (GF) breadmaking have been published in comparison to those on traditional bread. The aim of this study was to compare the properties of GF breads obtained by using a previously in-lab developed GF-sourdough (SD), compressed yeast (CY; Saccharomyces cerevisiae) or their mixture (SDCY) as leavening agents; more specifically, it aims to confirm the findings of a previous studies and to further improve (both in terms of recipe and process) the features of the resulting GF breads. Dough pH and rheological properties were measured. Fresh and stored breads were characterized for weight, height, specific volume, crust and crumb color, moisture, water activity, crumb hardness, and porosity. The combination SDCY was effective in improving bread volume and softness when compared to SD only. Furthermore, SD- and SDCY-crumbs exhibited a less crumbly behavior during storage (69 h, 25 °C, 60% of relative humidity) in comparison to CY-breads. This study confirms the positive effect of SD in GF breadmaking, in particular when used in combination with CY.

Physical and structural changes induced by high pressure on corn starch, rice flour and waxy rice flour.

The impact of high pressure (HP) processing on corn starch, rice flour and waxy rice flour was investigated as a function of pressure level (400MPa; 600MPa), pressure holding time (5min; 10min), and temperature (20°C; 40°C). Samples were pre-conditioned (final moisture level: 40g/100g) before HP treatments. Both the HP treated and the untreated raw materials were evaluated for pasting properties and solvent retention capacity, and investigated by differential scanning calorimetry, X-ray diffractometry and environmental scanning electron microscopy. Different pasting behaviors and solvent retention capacities were evidenced according to the applied pressure. Corn starch presented a slower gelatinization trend when treated at 600MPa. Corn starch and rice flour treated at 600MPa showed a higher retention capacity of carbonate and lactic acid solvents, respectively. Differential scanning calorimetry and environmental scanning electron microscopy investigations highlighted that HP affected the starch structure of rice flour and corn starch. Few variations were evidenced in waxy rice flour. These results can assist in advancing the HP processing knowledge, as the possibility to successfully process raw samples in a very high sample-to-water concentration level was evidenced. INDUSTRIAL RELEVANCE: This work investigates the effect of high pressure as a potential technique to modify the processing characteristics of starchy materials without using high temperature. In this case the starches were processed in the powder form - and not as a slurry as in previously reported studies - showing the flexibility of the HP treatment. The relevance for industrial application is the possibility to change the structure of flour starches, and thus modifying the processability of the mentioned products.

Influence of Psyllium, sugar beet fibre and water on gluten-free dough properties and bread quality.

Celiac patients generally have a low intake of protein and fibre attributed to their gluten-free (GF) diet. To satisfy the increasing demand for healthier products, this research focused on the effects of the supplementation of Psyllium (P) and sugar beet fibre (SB) on the mixing and leavening behaviour of gluten-free doughs. Four doughs, having different consistencies that made them suitable to be poured into moulds or to be shaped, and their corresponding breads were evaluated. The results obtained suggested that a lower consistency is preferred to assure good dough performances during leavening, in particular when ingredients having a high water affinity are included into the recipe. Both P and SB improved the workability of the doughs, but P played a central role on GF bread development, thanks to its film forming ability, and evidenced a more effective antistaling effect, thanks to its high water binding capacity.