The volume and thickness of preprostatic fat on MRIs are not associated with prostate cancer aggressiveness in men undergoing radical prostatectomy.

PURPOSE: Periprostatic fat has a metabolic activity on the prostate via cytokines that act paracrine on several signaling pathways including tumorigenesis. We investigated whether there was an association between preprostatic fat abundance and prostate cancer (PCa) aggressiveness. MATERIALS AND METHODS: We performed a retrospective study including patients who underwent radical prostatectomy in our center from the prospective RESCAP database. Preoperative MRIs were re-read and different measurements of preprostatic fat (PPF) were performed. The maximum thickness (PPFmax) and the minimum thickness (PPFmin) were measured on a median T2 sagittal section. The total volume of preprostatic fat (PPFV) and volume normalized by prostate volume (NPPFV) were calculated semi-automatically by segmentation on continuous axial sections of 3mm. The association of these parameters with the aggressiveness criteria of PCa (ISUP 3-5 on biopsies and on operative specimen, intermediate or high-risk disease according to D'AMICO, PSA>10, upgrading risk at radical prostatectomy) was measured as well as the association between normal, overweight, and obese BMI classes and the aggressiveness criteria used. RESULTS: One hundred and twenty-one men were included in this study. In both the univariate analysis and the multivariate analysis, none of the preprostatic fat measurements (PPFmax, PPFmin, PPFV and NPPFV) were associated with PCa aggressiveness criteria. There was also no association between BMI class and tumor aggressiveness. CONCLUSION: In this study, there is no association between the abundance of preprostatic fat and PCa aggressiveness according to the periprostatic fat measurements achieved. LEVEL OF EVIDENCE: III.

Regaining a Spatial Dimension: Mechanically Transferrable Two-Dimensional InAs Nanofins Grown by Selective Area Epitaxy.

We report a method for growing rectangular InAs nanofins with deterministic length, width, and height by dielectric-templated selective-area epitaxy. These freestanding nanofins can be transferred to lay flat on a separate substrate for device fabrication. A key goal was to regain a spatial dimension for device design compared to nanowires, while retaining the benefits of bottom-up epitaxial growth. The transferred nanofins were made into devices featuring multiple contacts for Hall effect and four-terminal resistance studies, as well as a global back-gate and nanoscale local top-gates for density control. Hall studies give a 3D electron density 2.5-5 × 1017 cm-3, corresponding to an approximate surface accumulation layer density 3-6 × 1012 cm-2 that agrees well with previous studies of InAs nanowires. We obtain Hall mobilities as high as 1200 cm2/(V s), field-effect mobilities as high as 4400 cm2/(V s), and clear quantum interference structure at temperatures as high as 20 K. Our devices show excellent prospects for fabrication into more complicated devices featuring multiple ohmic contacts, local gates, and possibly other functional elements, for example, patterned superconductor contacts, that may make them attractive options for future quantum information applications.

p-GaAs Nanowire Metal-Semiconductor Field-Effect Transistors with Near-Thermal Limit Gating.

Difficulties in obtaining high-performance p-type transistors and gate insulator charge-trapping effects present two major challenges for III-V complementary metal-oxide semiconductor (CMOS) electronics. We report a p-GaAs nanowire metal-semiconductor field-effect transistor (MESFET) that eliminates the need for a gate insulator by exploiting the Schottky barrier at the metal-GaAs interface. Our device beats the best-performing p-GaSb nanowire metal-oxide-semiconductor field effect transistor (MOSFET), giving a typical subthreshold swing of 62 mV/dec, within 4% of the thermal limit, on-off ratio ∼105, on-resistance ∼700 kΩ, contact resistance ∼30 kΩ, peak transconductance 1.2 µS/µm, and high-fidelity ac operation at frequencies up to 10 kHz. The device consists of a GaAs nanowire with an undoped core and heavily Be-doped shell. We carefully etch back the nanowire at the gate locations to obtain Schottky-barrier insulated gates while leaving the doped shell intact at the contacts to obtain low contact resistance. Our device opens a path to all-GaAs nanowire MESFET complementary circuits with simplified fabrication and improved performance.

The effect of nitridation on the polarity and optical properties of GaN self-assembled nanorods.

We report on the effect of nitridation on GaN self-assembled nanorods grown on the c-plane sapphire by metalorganic chemical vapour deposition (MOCVD). Nitridation conditions are found to critically influence the nanorod morphology and optical properties. The nanorod polarity was determined through a direct observation of atomic dumbbell pairs. While purely N-polar wires are obtained under optimised nitridation, incomplete or missing nitridation leads to mixed polarity. By comparing the morphology and the crystal structure with spatially resolved cathodoluminescence results, our study unambiguously establishes a link between appropriate nitridation duration and a homogeneous improvement in optical quality.

InP-InxGa1-xAs core-multi-shell nanowire quantum wells with tunable emission in the 1.3-1.55 µm wavelength range.

The usability and tunability of the essential InP-InGaAs material combination in nanowire-based quantum wells (QWs) are assessed. The wurtzite phase core-multi-shell InP-InGaAs-InP nanowire QWs are characterised using cross-section transmission electron microscopy and photoluminescence measurements. The InP-InGaAs direct interface is found to be sharp while the InGaAs-InP inverted interface is more diffused, in agreement with their planar counterpart. Bright emission is observed from the single nanowires containing the QWs at room temperature, with no emission from the InP core or outer barrier. The tunability of the QW emission wavelength in the 1.3-1.55 µm communication wavelength range is demonstrated by varying the QW thickness and in the 1.3 µm range by varying the composition. The experiments are supported by simulation of the emission wavelength of the wurtzite phase InP-InGaAs QWs in the thickness range considered. The radial heterostructure is further extended to design multiple QWs with bright emission, therefore establishing the capability of this material system for nanowire based optical devices for communication applications.

Coherent Charge Transport in Ballistic InSb Nanowire Josephson Junctions.

Hybrid InSb nanowire-superconductor devices are promising for investigating Majorana modes and topological quantum computation in solid-state devices. An experimental realisation of ballistic, phase-coherent superconductor-nanowire hybrid devices is a necessary step towards engineering topological superconducting electronics. Here, we report on a low-temperature transport study of Josephson junction devices fabricated from InSb nanowires grown by molecular-beam epitaxy and provide a clear evidence for phase-coherent, ballistic charge transport through the nanowires in the junctions. We demonstrate that our devices show gate-tunable proximity-induced supercurrent and clear signatures of multiple Andreev reflections in the differential conductance, indicating phase-coherent transport within the junctions. We also observe periodic modulations of the critical current that can be associated with the Fabry-Pérot interference in the nanowires in the ballistic transport regime. Our work shows that the InSb nanowires grown by molecular-beam epitaxy are of excellent material quality and hybrid superconducting devices made from these nanowires are highly desirable for investigation of the novel physics in topological states of matter and for applications in topological quantum electronics.

Understanding the growth and composition evolution of gold-seeded ternary InGaAs nanowires.

InGaAs nanowires offer great promise in fundamental studies of ternary compound semiconductors with variable composition and opens up a wide range of applications due to their bandgap tunability and high carrier mobility. Here, we report a study on the growth of Au-seeded InGaAs nanowires by metal-organic vapour phase epitaxy and present a model to explain the mechanisms that govern the growth and composition evolution in ternary III-V nanowires. The model allows us to further understand the limitations on the growth rate and incorporation of the two group III species imposed by the deposition conditions and some intrinsic properties of the material transport and nucleation. Within the model, the evolution of InGaAs nanowire growth rate and composition with particle size, temperature and V/III ratio is described and correlates very well with experimental findings. The understanding gained in this study should be useful for the controlled fabrication of tunable ternary nanowires for various applications.

Self-Equilibration of the Diameter of Ga-Catalyzed GaAs Nanowires.

Designing strategies to reach monodispersity in fabrication of semiconductor nanowire ensembles is essential for numerous applications. When Ga-catalyzed GaAs nanowire arrays are grown by molecular beam epitaxy with help of droplet-engineering, we observe a significant narrowing of the diameter distribution of the final nanowire array with respect to the size distribution of the initial Ga droplets. Considering that the droplet serves as a nonequilibrium reservoir of a group III metal, we develop a model that demonstrates a self-equilibration effect on the droplet size in self-catalyzed III-V nanowires. This effect leads to arrays of nanowires with a high degree of uniformity regardless of the initial conditions, while the stationary diameter can be further finely tuned by varying the spacing of the array pitch on patterned Si substrates.

Parity independence of the zero-bias conductance peak in a nanowire based topological superconductor-quantum dot hybrid device.

We explore the signatures of Majorana fermions in a nanowire based topological superconductor-quantum dot-topological superconductor hybrid device by charge transport measurements. At zero magnetic field, well-defined Coulomb diamonds and the Kondo effect are observed. Under the application of a finite, sufficiently strong magnetic field, a zero-bias conductance peak structure is observed. It is found that the zero-bias conductance peak is present in many consecutive Coulomb diamonds, irrespective of the even-odd parity of the quasi-particle occupation number in the quantum dot. In addition, we find that the zero-bias conductance peak is in most cases accompanied by two differential conductance peaks, forming a triple-peak structure, and the separation between the two side peaks in bias voltage shows oscillations closely correlated to the background Coulomb conductance oscillations of the device. The observed zero-bias conductance peak and the associated triple-peak structure are in line with Majorana fermion physics in such a hybrid topological system.

Time-resolved X-ray diffraction investigation of the modified phonon dispersion in InSb nanowires.

The modified phonon dispersion is of importance for understanding the origin of the reduced heat conductivity in nanowires. We have measured the phonon dispersion for 50 nm diameter InSb (111) nanowires using time-resolved X-ray diffraction. By comparing the sound speed of the bulk (3880 m/s) and that of a classical thin rod (3600 m/s) to our measurement (2880 m/s), we conclude that the origin of the reduced sound speed and thereby to the reduced heat conductivity is that the C44 elastic constant is reduced by 35% compared to the bulk material.

Growth mechanisms and process window for InAs V-shaped nanoscale membranes on Si[001].

Organized growth of high aspect-ratio nanostructures such as membranes is interesting for opto-electronic and energy harvesting applications. Recently, we reported a new form of InAs nano-membranes grown on Si substrates with enhanced light scattering properties. In this paper we study how to tune the morphology of the membranes by changing the growth conditions. We examine the role of the V/III ratio, substrate temperature, mask opening size and inter-hole distances in determining the size and shape of the structures. Our results show that the nano-membranes form by a combination of the growth mechanisms of nanowires and the Stranski-Krastanov type of quantum dots: in analogy with nanowires, the length of the membranes strongly depends on the growth temperature and the V/III ratio; the inter-hole distance of the sample determines two different growth regimes: competitive growth for small distances and an independent regime for larger distances. Conversely, and similarly to quantum dots, the width of the nano-membranes increases with the growth temperature and does not exhibit dependence on the V/III ratio. These results constitute an important step towards achieving rational design of high aspect-ratio nanostructures.

Anomalous zero-bias conductance peak in a Nb-InSb nanowire-Nb hybrid device.

Semiconductor InSb nanowires are expected to provide an excellent material platform for the study of Majorana fermions in solid state systems. Here, we report on the realization of a Nb-InSb nanowire-Nb hybrid quantum device and the observation of a zero-bias conductance peak structure in the device. An InSb nanowire quantum dot is formed in the device between the two Nb contacts. Due to the proximity effect, the InSb nanowire segments covered by the superconductor Nb contacts turn to superconductors with a superconducting energy gap Δ(InSb) ∼ 0.25 meV. A tunable critical supercurrent is observed in the device in high back gate voltage regions in which the Fermi level in the InSb nanowire is located above the tunneling barriers of the quantum dot and the device is open to conduction. When a perpendicular magnetic field is applied to the devices, the critical supercurrent is seen to decrease as the magnetic field increases. However, at sufficiently low back gate voltages, the device shows the quasi-particle Coulomb blockade characteristics and the supercurrent is strongly suppressed even at zero magnetic field. This transport characteristic changes when a perpendicular magnetic field stronger than a critical value, at which the Zeeman energy in the InSb nanowire is E(z) ∼ Δ(InSb), is applied to the device. In this case, the transport measurements show a conductance peak at the zero bias voltage and the entire InSb nanowire in the device behaves as in a topological superconductor phase. We also show that this zero-bias conductance peak structure can persist over a large range of applied magnetic fields and could be interpreted as a transport signature of Majorana fermions in the InSb nanowire.

Supercurrent and multiple Andreev reflections in an InSb nanowire Josephson junction.

Epitaxially grown, high quality semiconductor InSb nanowires are emerging material systems for the development of high performance nanoelectronics and quantum information processing and communication devices and for the studies of new physical phenomena in solid state systems. Here, we report on measurements of a superconductor-normal conductor-superconductor junction device fabricated from an InSb nanowire with aluminum-based superconducting contacts. The measurements show a proximity-induced supercurrent flowing through the InSb nanowire segment with a critical current tunable by a gate in the current bias configuration and multiple Andreev reflection characteristics in the voltage bias configuration. The temperature dependence and the magnetic field dependence of the critical current and the multiple Andreev reflection characteristics of the junction are also studied. Furthermore, we extract the excess current from the measurements and study its temperature and magnetic field dependences. The successful observation of the superconductivity in the InSb nanowire-based Josephson junction device indicates that InSb nanowires provide an excellent material system for creating and observing novel physical phenomena such as Majorana fermions in solid-state systems.

High yield of self-catalyzed GaAs nanowire arrays grown on silicon via gallium droplet positioning.

We report and detail a method to achieve growth of vertical self-catalyzed GaAs nanowires directly on Si(111) with a near-perfect vertical yield, using electron-beam-defined arrays of holes in a dielectric layer and molecular beam epitaxy. In our conditions, GaAs nanowires are grown along a vapor-liquid-solid mechanism, using in situ self-forming Ga droplets. The focus of this paper is to understand the role of the substrate preparation and of the pre-growth conditioning. Without changing temperature or the V/III ratio, the yield of vertical nanowires is increased incrementally up to 95%. The possibility to achieve very dense arrays, with center-to-center inter-wire distances less than 100 nm, is demonstrated.

Correlation-induced conductance suppression at level degeneracy in a quantum dot.

The large, level-dependent g factors in an InSb nanowire quantum dot allow for the occurrence of a variety of level crossings in the dot. While we observe the standard conductance enhancement in the Coulomb blockade region for aligned levels with different spins due to the Kondo effect, a vanishing of the conductance is found at the alignment of levels with equal spins. This conductance suppression appears as a canyon cutting through the web of direct tunneling lines and an enclosed Coulomb blockade region. In the center of the Coulomb blockade region, we observe the predicted correlation-induced resonance. Our findings are supported by numerical and analytical calculations.

The electrical and structural properties of n-type InAs nanowires grown from metal-organic precursors.

The electrical and structural properties of 111B-oriented InAs nanowires grown using metal-organic precursors have been studied. On the basis of electrical measurements it was found that the trends in carbon incorporation are similar to those observed in the layer growth, where an increased As/In precursor ratio and growth temperature result in a decrease in carbon-related impurities. Our results also show that the effect of non-intentional carbon doping is weaker in InAs nanowires compared to bulk, which may be explained by lower carbon incorporation in the nanowire core. We determine that differences in crystal quality, here quantified as the stacking fault density, are not the primary cause for variations in resistivity of the material studied. The effects of some n-dopant precursors (S, Se, Si, Sn) on InAs nanowire morphology, crystal structure and resistivity were also investigated. All precursors result in n-doped nanowires, but high precursor flows of Si and Sn also lead to enhanced radial overgrowth. Use of the Se precursor increases the stacking fault density in wurtzite nanowires, ultimately at high flows leading to a zinc blende crystal structure with strong overgrowth and very low resistivity.

Controlled polytypic and twin-plane superlattices in iii-v nanowires.

Semiconductor nanowires show promise for use in nanoelectronics, fundamental electron transport studies, quantum optics and biological sensing. Such applications require a high degree of nanowire growth control, right down to the atomic level. However, many binary semiconductor nanowires exhibit a high density of randomly distributed twin defects and stacking faults, which results in an uncontrolled, or polytypic, crystal structure. Here, we demonstrate full control of the crystal structure of InAs nanowires by varying nanowire diameter and growth temperature. By selectively tuning the crystal structure, we fabricate highly reproducible polytypic and twin-plane superlattices within single nanowires. In addition to reducing defect densities, this level of control could lead to bandgap engineering and novel electronic behaviour.

[Difficult reintubation during a Fantoni's tracheostomy resolved using a laryngeal mask]. / Ré-intubation difficile lors d'une trachéotomie de Fantoni résolue avec un masque laryngé.

We report the failure of a reintubation under direct laryngoscopy, during a percutaneous tracheostomy by Fantoni method. After the accidental per-procedural extubation and in front of an unpredicted difficult conventional endotracheal intubation, a laryngeal mask was used as an airway intubator conduit for the blind passage of the set's ventilation tube. This ventilation tube is a 40 cm long, 4 mm internal diameter special catheter with low pressure cuff, included into the TLT kit. The end of the procedure was uneventful.