Implant survival rate and marginal bone loss of 174 implants with different variables associated over a minimum observational period of 20 years: A retrospective study.

PURPOSE: To investigate the long-term implant survival rate and marginal bone loss (MBL) of implants with different variables associated over an observational period of at least 20 years. MATERIALS AND METHODS: Patients with at least one implant placed prior to 2001 were recalled and visited. Data on implant macro-design, prosthetic aspects, site distribution, and patient-related factors were collected. MBL was evaluated on intraoral X-rays and peri-implant soft tissue parameters were recorded. The patients were asked to fill out a questionnaire to evaluate their satisfaction with the treatment received. Descriptive statistics indicators were estimated. Analysis of variance and analysis of covariance models were used to investigate any differences in the MBL and peri-implant probing depth (PPD) among the variables. A chi-square analysis was performed to investigate any association between different types of prosthetic implant-supported rehabilitations and survival/success outcomes. RESULTS: Forty-one (41) patients and 174 implants were included with a mean observational period of 23.3 ± 2.8 years. The implant survival and success rates were 96.5% and 83.3% respectively, while 3.5% of early failures were detected. The lowest success rates were observed for implants supporting fixed full-arch rehabilitations (71.05%) and overdenture rehabilitations (86.11%). A mean MBL of 1.81 ± 0.71 mm and a mean PPD of 3.38 ± 1.62 mm were recorded. The interaction between the collected data with MBL and PPD did not reveal any statistically significant differences between the variables (p > 0.05). A statistically significant difference was recorded when analyzing the association between the different types of prosthetic implant-supported rehabilitations and success rates (p = 0.014), with fixed and removable full-arch rehabilitations presenting with lower success rates. Answers to the questionnaire showed a generally high level of satisfaction. CONCLUSIONS: Within the limits of this retrospective study and based on the results, an implant survival rate higher than 96% was observed after a mean observational period of 23.3 ± 2.8 years. Both the implant survival rate and MBL seemed stable after a mean observational period of 23.3 ± 2.8 years. Implants supporting fixed and removable full-arch rehabilitations seemed to present lower success rates over time. Implant rehabilitation seemed to provide patients with optimal long-term outcomes in terms of functional and psychological aspects.

Programmed-release intraosseus anesthesia as an alternative to lower alveolar nerve block in lower third molar extraction: a randomized clinical trial.

Background: Intraosseous anesthesia is the process by which an anesthetic solution, after penetration of the cortical bone, is directly injected into the spongiosa of the alveolar bone supporting the tooth. This study aimed to compare the effectiveness of the traditional inferior alveolar nerve block (IANB) and computerized intraosseous anesthesia in the surgical extraction of impacted lower third molars, compare their side effects systemically by monitoring heart rate, and assess patients' a posteriori preference of one technique over the other. Methods: Thirty-nine patients with bilaterally impacted third molars participated in this study. Each patient in the sample was both a case and control, where the conventional technique was randomly assigned to one side (group 1) and the alternative method to the contralateral side (group 2). Results: The traditional technique was faster in execution than anesthesia delivered via electronic syringe, which took 3 min to be administered. However, it was necessary to wait for an average of 6 ± 4 min from the execution to achieve the onset of IANB, while the latency of intraosseous anesthesia was zero. Vincent's sign and lingual nerve anesthesia occurred in 100% of cases in group 1. In group 2, Vincent's sign was recorded in 13% of cases and lingual anesthesia in four cases. The average duration of the perceived anesthetic effect was 192 ± 68 min in group 1 and 127 ± 75 min in group 2 (P < 0.001). The difference between the heart rate of group 1 and group 2 was statistically significant. During infiltration in group 1, heartbeat frequency increased by 5 ± 13 beats per minute, while in group 2, it increased by 22 ± 10 beats per minute (P < 0.001). No postoperative complications were reported for either technique. Patients showed a preference of 67% for the alternative technique and 20% for the traditional, and 13% of patients were indifferent. Conclusion: The results identified intraosseous anesthesia as a valid alternative to conventional anesthesia in impacted lower third molar extraction.

Preliminary evaluation of the utility of optical coherence tomography in detecting structural changes during photobiomodulation treatment in patients with atrophic-erosive oral lichen planus.

INTRODUCTION: Oral lichen planus (OLP) is a common oral inflammatory condition. Against symptomatic atrophic-erosive OLP, topical steroids, or photobiomodulation (PBM) are deployed. Optical coherence tomography (OCT) provides a real-time, non-invasive, tissue investigation. Aim of this study was to evaluate modifications of OCT pattern in patients with painful atrophic-erosive OLP, before and after treatment with PBM, comparing those results with patients treated with topical steroid. METHODS: Two groups of 20 OLP patients were evaluated. Group A underwent two daily application of 0.05 % clobetasol propionate for 8 weeks; group B was treated with eight weekly PBM sessions using a 980/645 nm diode laser. OCT scans were performed before and after treatment, and six months after end of the proposed protocol. Changes of width of stratified epithelium (EP) and lamina propria (LP) were quantified. RESULTS: After 8-weeks, both groups experienced a significant increase of EP width (p < 0.05), and a significant decrease of LP width (p < 0.05), with Δ-EP in Group A significantly higher than Group B (p = 0.0015); conversely, Δ-LP was not significantly different (p > 0.05). After six months, significant increase of EP width remained only in group B (p = 0.01), with no significant decrease of LP mean width in both groups (p > 0.05). CONCLUSIONS: Increase of EP and decrease of LP might be explained as consequence of clobetasol and PBM ability to promote epithelial healing, and to reduce interface inflammation. When investigated with OCT, clobetasol appears to provide more significant short-term structural changes, whereas PBM might guarantee long-term alterations.

Can Plasma Rich in Growth Factors Expedite Healing of Postextraction Tooth Sockets in Patients Undergoing Urgent Liver Transplantation?

PURPOSE: Infections foster morbidity and mortality after liver transplantation (LT). Pre-LT eradication of oral infectious foci is not always possible for patients needing an urgent LT because postextraction sockets must be healed before the patient is operated, and this requires at least 3 weeks. To accelerate healing, we tested the effect of plasma-rich growth factor (PRGF), a highly concentrated form of autogenous platelets on healing. MATERIALS AND METHODS: Prospective case-control split-mouth study for more than 100 candidates for LT needing routine extractions of 2 homologous teeth: a socket was to be treated with PRGF, whereas its match (control [CTRL]) was to undergo natural healing. The outcome of interest was the socket size derived from the measurements on the transversal diameters and deepest level of penetration on the PRGF and CTRL sides after extraction and on day 7, 14, and 21 postextraction. The primary predictor was treatment status (PRGF vs CTRL); secondary predictors, the tooth extracted and patient's features. The statistical analysis used nonparametric tests and best subset regression. RESULTS: All measurements evidenced a significantly (P < .0001) more advanced closure on the PRGF side than the CTRL side. One week after extraction, PRGF sockets were reduced to 12% (molars) and 6% (nonmolars) of the original wound versus 32 and 20% for CTRL, respectively. The percentage of PRGF sockets with size less than or equal to 5% was 7% for molars and 44% for nonmolars versus 0 and 12% for CTRL (P < .0001), respectively. The percentages with size less than or equal to 10% were 37% for molars and 81% for nonmolars on the PRGF side versus 2 and 26% on the CTRL side, respectively. These percentages showed a significant decrease for smoking patients. CONCLUSIONS: The outcome of our trial showed that PRGF significantly accelerates closure of postextraction sockets. Its use, at least in patients who occupy top positions in the LT waiting list, is recommended.

Individual mandibular movement registration and reproduction using an optoeletronic jaw movement analyzer and a dedicated robot: a dental technique.

BACKGROUND: Fully adjustable articulators and pantographs record and reproduce individual mandibular movements. Although these instruments are accurate, they are operator-dependant and time-consuming. Pantographic recording is affected by inter and intra operator variability in the individuation of clinical reference points and afterwards in reading pantographic recording themselves. Finally only border movements can be reproduced. METHODS: Bionic Jaw Motion system is based on two components: a jaw movement analyzer and a robotic device that accurately reproduces recorded movements. The jaw movement analyzer uses an optoelectronic motion system technology made of a high frequency filming camera that acquires 140frames per second and a custom designed software that recognizes and determines the relative distance at each point in time of markers with known geometries connected to each jaw. Circumferential modified retainers connect markers and do not cover any occlusal surfaces neither obstruct occlusion. The recording process takes 5 to 10 s. Mandibular movement performance requires six degrees of freedom of movement, 3 rotations and 3 translations. Other robots are based on the so-called delta mechanics that use several parallel effectors to perform desired movements in order to decompose a complex trajectory into multiple more simple linear movements. However, each parallel effector introduces mechanical inter-component tolerances and mathematical transformations that are required to transform a recorded movement into the combination of movements to be performed by each effector. Bionic Jaw Motion Robot works differently, owing to three motors that perform translational movements and three other motors that perform rotations as a gyroscope. This configuration requires less mechanical components thus reducing mechanical tolerances and production costs. Both the jaw movement analyzer and the robot quantify the movement of the mandible as a rigid body with six degrees of freedom. This represents an additional advantage as no mathematical transformation is needed for the robot to reproduce recorded movements. RESULTS: Based on the described procedure, Bionic Jaw Motion provide accurate recording and reproduction of maxillomandibular relation in static and dynamic conditions. CONCLUSION: This robotic system represents an important advancement compared to available analogical and digital alternatives both in clinical and research contexts for cost reduction, precision and time saving opportunities.

In-vivo usefulness of optical coherence tomography in atrophic-erosive oral lichen planus: Comparison between histopathological and ultrastructural findings.

Oral lichen planus (OLP) is a common premalignant chronic inflammatory disorder. Optical Coherence Tomography (OCT) provides a real-time, non-invasive, and in-situ optical signature using light of varying wavelengths to examine tissue. Aim of the present study was to assess the possible role of OCT as diagnostic tool for atrophic-erosive OLP by examining OCT scans of healthy buccal mucosa, and comparing their ultrastructural features with those of a buccal mucosa affected by atrophic-erosive OLP, using their histopathological counterparts as the gold standard. Through grayscale (enface scan) and an application in which the vascularization of the tissue is visible (dynamic scan), it was possible to distinguish the healthy from the lichenoid pattern from 20 controls (12 M; 8 F; mean age: 41.32 years) and 20 patients with histologically confirmed atrophic-erosive OLP (7 M; 13 F; mean age: 64.27 years). In detail, mean width of stratified squamous epithelium (EP) and lamina propria (LP) were evaluated. Among controls, EP and LP showed a mean width of 300 (±50) and of 600 (±50) µm respectively; among cases, disruption of membrane basement prevented from any measurement. Furthermore, a differential pattern of EP and LP emerged between the two groups: a light-grayish, hypo-reflective, homogeneous area of EP recurring in controls turned into a hyper-reflective, non-homogeneous area among cases. Dynamic scan showed a differential profile of LP vascularization, varying from a hypo-reflective red area with small blood vessels in the control group, to a hypo/hyper-reflective area, completely overrun by a denser, wider blood flow amid OLP cases. Although histopathological examination remains the gold standard for OLP diagnosis, OCT could be a potentially helpful tool for the clinician and the pathologist, since it allows analysis of the vascularization of the sample without adversely affecting histological processing.

Fibroblast Interaction with Different Abutment Surfaces: In Vitro Study.

BACKGROUND: Attaining an effective mucosal attachment to the transmucosal part of the implant could protect the peri-implant bone. AIM: To evaluate if chair side surface treatments (plasma of Argon and ultraviolet light) may affect fibroblast adhesion on different titanium surfaces designed for soft tissue healing. METHODS: Grade 5 titanium discs with four different surface topographies were subdivided into 3 groups: argon-plasma; ultraviolet light, and no treatment. Cell morphology and adhesion tests were performed at 20 min, 24 h, and 72 h. RESULTS: Qualitative observation of the surfaces performed at the SEM was in accordance with the anticipated features. Roughness values ranged from smooth (MAC Sa = 0.2) to very rough (XA Sa = 21). At 20 min, all the untreated surfaces presented hemispherical cells with reduced filopodia, while the cells on treated samples were more spread with broad lamellipodia. However, these differences in spreading behavior disappeared at 24 h and 72 h. Argon-plasma, but not UV, significantly increased the number of fibroblasts independently of the surface type but only at 20 min. Statistically, there was no surface in combination with a treatment that favored a greater cellular adhesion. CONCLUSIONS: Data showed potential biological benefits of treating implant abutment surfaces with the plasma of argon in relation to early-stage cell adhesion.

Effects of argon plasma treatment on the osteoconductivity of bone grafting materials.

BACKGROUND: The osteoconductive properties of bone grafting materials represent one area of research for the management of bony defects found in the fields of periodontology and oral surgery. From a physico-chemical aspect, the wettability of the graft has been demonstrated to be one of the most important factors for new bone formation. It is also well-known that argon plasma treatment (PAT) and ultraviolet irradiation (UV) may increase the surface wettability and, consequently, improve the regenerative potential of the bone grafts. Therefore, the aim of the present in vitro study was to evaluate the effect of PAT and UV treatment on the osteoconductive potential of various bone grafts. MATERIALS AND METHODS: The following four frequently used bone grafts were selected for this study: synthetic hydroxyapatite (Mg-HA), biphasic calcium phosphate (BCP), cancellous and cortical xenogenic bone matrices (CaBM, CoBM). Sixty-six serially numbered disks 10 mm in diameter were used for each graft material and randomly assigned to the following three groups: test 1 (PAT), test 2 (UV), and control (no treatment). Six samples underwent topographic analysis using SEM pre- and post-treatments to evaluate changes in surface topography/characteristics. Additionally, cell adhesion and cell proliferation were evaluated at 2 and 72 h respectively following incubation in a three-dimensional culture system utilizing a bioreactor. Furthermore, the effects of PAT and UV on immune cells were assessed by measuring the viability of human macrophages at 24 h. RESULTS: The topographic analysis showed different initial morphologies of the commercial biomaterials (e.g., Mg-HA and BCP showed flat morphology; BM samples were extremely porous with high roughness). The surface analysis following experimental treatments did not demonstrate topographical difference when compared with controls. Investigation of cells demonstrated that PAT treatment significantly increased cell adhesion of all 4 evaluated bone substitutes, whereas UV failed to show any statistically significant differences. The viability test revealed no differences in terms of macrophage adhesion on any of the tested surfaces. CONCLUSION: Within their limitations, the present results suggest that treatment of various bone grafting materials with PAT appears to enhance the osteoconductivity of bone substitutes in the early stage by improving osteoblast adhesion without concomitantly affecting macrophage viability. CLINICAL RELEVANCE: Treatment of bone grafts with PAT appears to result in faster osseointegration of the bone grafting materials and may thus favorably influence bone regeneration.

Piezoelectric implant surgery and immediate loading in the aesthetic zone.

BACKGROUND: Replacement of missing teeth in the anterior aesthetic zone has challenged clinicians with fixed, removable or implant prosthodontics. Problems have been encountered could void aesthetic and functional results. The aim of this study was to present a clinical case report in which clinician challenged a very strong aesthetic case with an innovative surgical and prosthetic approach. METHODS: A patient who presented to the authors with a maxillary central incisor that had a hopeless prognosis secondary to acute localized severe periodontitis. The patient was treated by extracting the tooth and replacing it immediately with a platform switched implant using piezoelectric surgery. The implant was then restored with an immediate, non-occlusal loading provisional restoration. RESULTS: The implant became osseointegrated and was ultimately restored with a definitive abutment and crown restoration. CONCLUSIONS: Innovative approaches could represent a valid alternative to restore patients functionally and aesthetically.

The Crosstalk Between Osteodifferentiating Stem Cells and Endothelial Cells Promotes Angiogenesis and Bone Formation.

The synergistic crosstalk between osteodifferentiating stem cells and endothelial cells (ECs) gained the deserved consideration, shedding light on the role of angiogenesis for bone formation and healing. A deep understanding of the molecular basis underlying the mutual influence of mesenchymal stem cells (MSCs) and ECs in the osteogenic process may help improve greatly bone regeneration. Here, the authors demonstrated that osteodifferentiating MSCs co-cultured with ECs promote angiogenesis and ECs recruitment. Moreover, through the use of 3D co-culture systems, we showed that ECs are in turn able to further stimulate the osteodifferentiation of MSCs, thus enhancing bone production. These findings highlighted the existence of a virtuous loop between MSCs and ECs that is central to the osteogenic process. Unraveling the molecular mechanisms governing the functional interaction MSCs and ECs holds great potential in the field of regenerative medicine.

Energy dispersion spectroscopy analysis on failed implants: a preliminary survey.

BACKGROUND: Peri-implantitis or implant infection is a biologic complication involving soft and hard tissues around implants. The prevalence of the disease was recently estimated between 12% and 14% according to studies dealing with the private practice, which is also consistent with university statistics. Different methods were presented to minimize or even to remove biofilm from contaminated surfaces completely. Chemical and air-abrasive treatments have been shown to be able to disrupt biofilm. Chemical cleaning solution in combination with mechanical debridement is ineffective to eliminate bacterial biofilm. Lasers and photodynamic therapy presented inconsistent results. Interestingly, implantoplasty remains a preferred way to remove infected contaminants. When re-osseointegration of these treated contaminated implant surfaces was assessed, the quality of the implant surface after decontamination dictates the outcome. No matter the type of intervention implemented to counteract peri-implantitis, implant failure sometimes remains an unavoidable outcome. In this in-vitro report, the authors propose an automated EDS analysis of the whole dental implant surface to determine the percentage directly involved by the bacterial biofilm on failed fixtures. METHODS: Samples morphology was studied using a Scanning Electron Microscope (SEM, Zeiss Evo 50 XVP with LaB6 source). The instrument is endowed with detectors for secondary and backscattered electrons collection, as well as energy dispersion spectroscopy (EDS) analyzer for elemental analysis. All the materials were observed using 10kV of voltage. Samples, soon after being collected and fixed in 4% paraformaldehyde, were covered with a golden layer of about 10 nm in order to avoid charge accumulation during SEM-EDS analysis. Automated EDS mapping was obtained on the entire surface. RESULTS: On the samples analyzed (N.=10), the mean surface covered by bacterial biofilm was 79.3±7.6% (Mean±95% CI) based on the percentage of titanium, oxygen, and phosphorous. As a control, direct observation of the samples was also performed owing to SEM images finding an optimal correlation between the automatic EDS mapping and human-driven quantification of the bacterial biofilm. CONCLUSIONS: Based on these preliminary data, EDS automatic mapping may be considered an exciting method to analyze failed implants. Furthermore, the possible future applications in this field, once the bacteria have been identified, could involve a more specific treatment with the aim of remove infected contaminants on the implant surfaces.

Is It Safe to Remove Teeth in Liver Transplant Patients Without Antibiotics? A Retrospective Study of 346 Patients.

PURPOSE: Eradication of oral infectious foci is essential for liver transplant candidates. The main issue is whether antibiotic prophylaxis is necessary for all dental extractions despite the possible fostering of resistant bacteria. To overcome the scarcity of evidence-based data, our study analyzed the background and outcomes of a large number of routine extractions performed in our institution without antibiotic prophylaxis in patients with different liver pathologies. MATERIALS AND METHODS: In this retrospective cohort study, the outcome of interest was the occurrence of local infections and minor complications during the 7-day follow-up period after extraction; the predictors were the demographic and clinical variables of the patients (age, gender, liver pathology, Model for End-Stage Liver Disease score, international normalized ratio) and the extraction variables (single vs multiple extractions, isolated vs contiguous teeth, single-rooted vs multirooted teeth). The statistical analysis used univariate nonparametric tests and binary multivariate logistic regressions. RESULTS: The 346 liver transplant candidates (mean age, 53 ± 8 years; 24% women) underwent 662 routine extraction sessions involving 1,329 teeth. The 7-day dental follow-up detected no signs of postoperative wound infection (rate = 0% [95% confidence interval (CI), 0 to 0.9%]). Accordingly, the 2-week post-extraction clinical monitoring excluded symptoms of systemic infection attributable to the dental procedure. Minor complications (mild bleeding, slow healing, inflamed socket) occurred in 50 patients (rate = 14% [95% CI, 11 to 18%]) in the 3 days after extraction. Significant risk factors for minor complications were refractory ascites (P < .0001; OR = 8 [95% CI, 3 to 20]), extraction of multirooted contiguous teeth (P < 0.0001; OR = 5 [95% CI, 2.5 to 9]), and a Model for End-Stage Liver Disease score greater than 18 (P = 0.01; OR = 2.4 [95% CI, 1.2 to 5]). CONCLUSIONS: Our study showed that routine extractions without antibiotic prophylaxis can be performed safely in liver transplant candidates, even in the presence of 1 or more non-controllable risk factors. Using atraumatic techniques, we achieved satisfactory healing of the gingiva and socket in all patients in a week, without any signs of local infection. The few minor complications were readily managed and resolved within 3 days after extraction.

A 4-Year Retrospective Radiographic Study of Marginal Bone Loss of 156 Titanium Implants Placed with Ultrasonic Site Preparation.

This retrospective study evaluated implant survival rate (SR) and marginal bone loss around dental implants placed with ultrasonic implant site preparation. A total of 156 implants were placed in 28 totally and partially edentulous patients. Bone loss was measured on intraoral paralleling digital radiographs taken at the impression phase and after 4 years of loading. As 3 implants (1.92%) failed at the second surgery stage, the SR was 98.08% after 4 years. The mean marginal bone loss was 0.52 ± 0.33 mm (0.51 ± 0.35 mm mesially and 0.53 ± 0.35 mm distally), with comparable values for implants inserted into the maxilla (0.52 ± 0.32 mm) and the mandible (0.52 ± 0.35 mm).

Direct Oral Anticoagulants and Medical Comorbidities in Patients Needing Dental Extractions: Management of the Risk of Bleeding.

PURPOSE: The purpose of this study was to measure the frequency of bleeding during and after tooth extraction in patients exposed to direct oral anticoagulants (DOACs) and identify risk factors for prolonged or excessive bleeding. MATERIALS AND METHODS: This retrospective cohort study involved 100 patients who underwent tooth extractions according to the European Heart Rhythm Association protocol: continuation of DOAC therapy for extractions of up to 3 teeth in the same session performed at the (presumed) time of DOAC trough concentration. We respected an interval of at least 4 hours between extraction and last DOAC intake. The outcome of interest was incidence of mild, moderate, and severe bleeding during the intervention and in the 7-day follow-up period. Data analysis considered the presence of comorbidities as the primary predictor for bleeding; additional predictors were age, gender, type of comorbidity, indication for DOAC therapy, DOAC agent, and extraction of contiguous teeth. RESULTS: Of the patients, 64 had comorbidities (diabetes in 50%). The distributions of demographic, clinical, and dental variables were similar for patients with and without comorbidities. We observed 4 bleeding episodes (1 moderate episode 1 hour after the extraction and 3 mild episodes the day after the extraction) in the comorbidity group and none in the non-comorbidity group (4 of 64 vs 0 of 36, P = .29; overall bleeding rate, 4 of 100). The factor significantly triggering bleeding in patients with comorbidity was extractions of couples and triplets of multirooted teeth (P = .004). CONCLUSIONS: Tooth extractions in patients with comorbidities taking DOACs may be safely managed as long as they are performed at least 4 hours after the last DOAC intake and do not involve 2 or 3 contiguous premolars and molars.

Immediate Loading of Implant-Supported Single Crowns after Conventional and Ultrasonic Implant Site Preparation: A Multicenter Randomized Controlled Clinical Trial.

AIM: To compare implant survival rate and marginal bone loss (MBL) of immediately loaded single implants inserted by using ultrasonic implant site preparation (UISP) (test) and conventional rotary instrumentation (control). METHODS: Two single implants were inserted for each patient: after randomization, test site was prepared by using an ultrasonic device (Piezosurgery Touch, Mectron, Italy) and control site was prepared by using the drills of the selected implant system (Premium AZT, Sweden & Martina, Italy), until reaching a final diameter of 3 mm in both groups. Identical implants (3.8x11.5 mm) were inserted in all sites at crestal level. Impressions were taken and screwed resin single crowns with platform-switched provisional abutments were delivered with 48 hours. Periapical radiographs were taken at provisional crown insertion (T0), 6 months (T1) and one year (T2) after prosthetic loading to measure MBL. All data were tested for normality and subsequently analyzed by paired samples t-test and forward multiple linear regression. RESULTS: Forty-eight patients were treated in six centers with the insertion of ninety-six implants (48 test; 48 control). Four implants in four patients failed within the first six months of healing (two in test group; two in control group; no difference between groups). Forty patients (age 60.1±10.7 years; 22 female, 18 male) were included in the final analysis. Mean MBL after six months of loading was 1.39±1.03 mm in the test group and 1.42±1.16 mm in the control group (p>0.05) and after one year was 1.92±1.14 mm and 2.14±1.55 mm in test and control, respectively (p>0.05). CONCLUSIONS: No differences in survival rate and MBL were demonstrated between UISP and conventional site preparation with rotary instruments in immediately loaded dental implants: UISP, with its characteristics of enhanced surgical control and safety in proximity of delicate structures, may be used as a reliable alternative to the traditional drilling systems.

Early Response of Fibroblasts and Epithelial Cells to Pink-Shaded Anodized Dental Implant Abutments: An In Vitro Study.

PURPOSE: This research aimed to assess whether pink-shaded anodized surfaces could enhance the adhesion of soft tissue cells compared with untreated machined titanium surfaces. MATERIALS AND METHODS: Two types of Ti-Al-V titanium samples were prepared: machined titanium (Ti) and anodized titanium (AnoTi). The microstructure was studied by means of a scanning electron microscope. X-ray photoelectron spectroscopy (XPS) was carried out as well. The wetting properties were investigated by the sessile drop technique with water and diiodomethane. To investigate the biologic response in vitro, the epithelial cell line HaCaT and the fibroblastic cell line NHDF were used. Cell adhesion, morphology, and proliferation were evaluated. RESULTS: The microstructure of the tested surfaces was irregularly smooth for both types of samples with no relevant morphologic differences. The XPS and HR-XPS performed on the AnoTi samples confirmed the presence of Ti, O, and C, along with Ti oxides. Following the optical contact angle measurements, the anodization process induced a slight transition toward the hydrophobic regime. Consequently, the surface free energy values differed significantly between the anodized and the machined samples. Anodized Ti significantly increased the adhesion and proliferation of both epithelial cells and fibroblasts when compared with the pristine Ti controls. CONCLUSION: Compared with the clinical standard, anodized surfaces could enhance the adhesion of the two major cell types within the peri-implant soft tissues, which makes pink anodization a promising option for implant dentistry.

Apical periodontitis: preliminary assessment of microbiota by 16S rRNA high throughput amplicon target sequencing.

BACKGROUND: Apical periodontitis includes periapical granulomas and radicular cysts, which are histologically distinguished by the absence and the presence of an epithelial lining, respectively. The main cause of apical periodontitis is the bacterial colonization of the root canal space. This research aimed at assessing whether and how periapical granulomas and radicular cysts differ in terms of microbiota using high throughput amplicon target sequencing (HTS) techniques. METHODS: This study included 5 cases of Periapical Granulomas (PGs) and 5 cases of Radicular Cysts (RCs) selected on the base of histology out of 37 patients from January 2015 to February 2016. Complete medical history, panoramic radiograms (OPTs) and histologic records of each patient were assessed. Only lesions greater than 1 cm in diameter and developed in proximity to teeth with bad prognosis were included. The microbiota present in periapical granulomas and radicular cysts thus retrieved was finely characterized by pyrosequencing of the 16S rRNA genes. RESULTS: The core of OTUs shared between periapical granulomas and radicular cysts was dominated by the presence of facultative anaerobes taxa such as: Lactococcus lactis, Propionibacterium acnes, Staphylococcus warneri, Acinetobacter johnsonii and Gemellales. L. lactis, the main OTUs of the entire datasets, was associated with periapical granuloma samples. Consistently with literature, the anaerobic taxa detected were most abundant in radicular cyst samples. Indeed, a higher abundance of presumptive predicted metabolic pathways related to Lipopolysaccharide biosynthesis was found in radicular cyst samples. CONCLUSIONS: The present pilot study confirmed the different microbial characterization of the two main apical periodontitis types and shade light on the possible role of L. lactis in periapical granulomas.

Salivary extracellular vesicle-associated miRNAs as potential biomarkers in oral squamous cell carcinoma.

BACKGROUND: Several studies in the past have investigated the expression of micro RNAs (miRNAs) in saliva as potential biomarkers. Since miRNAs associated with extracellular vesicles (EVs) are known to be protected from enzymatic degradation, we evaluated whether salivary EVs from patients with oral squamous cell carcinoma (OSCC) were enriched with specific subsets of miRNAs. METHODS: OSCC patients and controls were matched with regards to age, gender and risk factors. Total RNA was extracted from salivary EVs and the differential expression of miRNAs was evaluated by qRT-PCR array and qRT-PCR. The discrimination power of up-regulated miRNAs as biomarkers in OSCC patients versus controls was evaluated by the Receiver Operating Characteristic (ROC) curves. RESULTS: A preliminary qRT-PCR array was performed on samples from 5 OSCC patients and 5 healthy controls whereby a subset of miRNAs were identified that were differentially expressed. On the basis of these results, a cohort of additional 16 patients and 6 controls were analyzed to further confirm the miRNAs that were up-regulated or selectively expressed in the previous pilot study. The following miRNAs: miR-302b-3p and miR-517b-3p were expressed only in EVs from OSCC patients and miR-512-3p and miR-412-3p were up-regulated in salivary EVs from OSCC patients compared to controls with the ROC curve showing a good discrimination power for OSCC diagnosis. The Kyoto Encyclopedia of Gene and Genomes (KEGG) pathway analysis suggested the possible involvement of the miRNAs identified in pathways activated in OSCC. CONCLUSIONS: In this work, we suggest that salivary EVs isolated by a simple charge-based precipitation technique can be exploited as a non-invasive source of miRNAs for OSCC diagnosis. Moreover, we have identified a subset of miRNAs selectively enriched in EVs of OSCC patients that could be potential biomarkers.

Nano-Pore Size of Alumina Affects Osteoblastic Response.

The rapid development and application of nanotechnology to biological interfaces has impacted the bone implant field, allowing researchers to finely modulate the interface between biomaterials and recipient tissues. In the present study, oxidative anodization was exploited to generate two alumina surfaces with different pore diameters. The former displayed surface pores in the mean range of 16-30 nm, while in the latter pores varied from to 65 to 89 nm. The samples were characterized by Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-ray spectroscopy (EDX) analysis prior to being tested with pre-osteoblastic MC3T3-E1 cells. In vitro cell response was studied in terms of early cell adhesion, viability, and morphology, including focal adhesion quantification. Both the alumina samples promoted higher cell adhesion and viability than the control condition represented by the standard culture dish plastic. Osteogenic differentiation was assessed through alkaline phosphatase activity and extracellular calcium deposition, and it was found that of the two nano-surfaces, one was more efficient than the other. By comparing for the first time two nano-porous alumina surfaces with different pore diameters, our data supported the role of nano-topography in inducing cell response. Modulating a simple aspect of surface texture may become an attractive route for guiding bone healing and regeneration around implantable metals.