Multicenter evaluation of the Selux Next-Generation Phenotyping antimicrobial susceptibility testing system.

The Selux Next-Generation Phenotyping (NGP) system (Charlestown, MA) is a new antimicrobial susceptibility testing system that utilizes two sequential assays performed on all wells of doubling dilution series to determine MICs. A multicenter evaluation of the performance of the Selux NGP system compared with reference broth microdilution was conducted following FDA recommendations and using FDA-defined breakpoints. A total of 2,488 clinical and challenge isolates were included; gram-negative isolates were tested against 24 antimicrobials, and gram-positive isolates were tested against 15 antimicrobials. Data is provided for all organism-antimicrobial combinations evaluated, including those that did and did not meet FDA performance requirements. Overall very major error and major error rates were less than 1% (31/3,805 and 107/15,606, respectively), essential agreement and categorical agreement were >95%, reproducibility was ≥95%, and the average time-to-result (from time of assay start to time of MIC result) was 5.65 hours.

Multicenter Evaluation of the Modified Carbapenem Inactivation Method and the Carba NP for Detection of Carbapenemase-Producing Pseudomonas aeruginosa and Acinetobacter baumannii.

The purpose of this study was to develop the modified carbapenem inactivation method (mCIM) for the detection of carbapenemase-producing Pseudomonas aeruginosa (CP-PA) and carbapenemase-producing Acinetobacter baumannii (CP-AB) and perform a multicenter evaluation of the mCIM and Carba NP tests for these nonfermenters. Thirty P. aeruginosa and 30 A. baumannii isolates previously characterized by whole-genome sequencing from the CDC-FDA Antibiotic Resistance Isolate Bank were evaluated, including CP isolates (Ambler class A, B, and D), non-carbapenemase-producing (non-CP) carbapenem-resistant isolates, and carbapenem-susceptible isolates. Initial comparison of a 1-µl versus 10-µl loop inoculum for the mCIM was performed by two testing sites and showed that 10 µl was required for reliable detection of carbapenemase production among P. aeruginosa and A. baumannii Ten testing sites then evaluated the mCIM using a 10-µl loop inoculum. Overall, the mean sensitivity and specificity of the mCIM for detection of CP-PA across all 10 sites were 98.0% (95% confidence interval [CI], 94.3 to 99.6; range, 86.7 to 100) and 95% (95% CI, 89.8 to 97.7; range, 93.3 to 100), whereas the mean sensitivity and specificity among CP-AB were 79.8% (95% CI, 74.0 to 84.9; range, 36.3 to 95.7) and 52.9% (95% CI, 40.6 to 64.9; range, 28.6 to 100), respectively. At three sites that evaluated the performance of the Carba NP test using the same set of isolates, the mean sensitivity and specificity of the Carba NP test were 97.8% (95% CI, 88.2 to 99.9; range, 93.3 to 100) and 97.8% (95% CI, 88.2 to 99.9; range, 93.3 to 100) for P. aeruginosa and 18.8% (95% CI, 10.4 to 30.1; range, 8.7 to 26.1) and 100% (95% CI, 83.9 to 100; range, 100) for A. baumannii Overall, we found both the mCIM and the Carba NP test to be accurate for detection of carbapenemase production among P. aeruginosa isolates and less reliable for use with A. baumannii isolates.

Modified Carbapenem Inactivation Method for Phenotypic Detection of Carbapenemase Production among Enterobacteriaceae.

The ability of clinical microbiology laboratories to reliably detect carbapenemase-producing carbapenem-resistant Enterobacteriaceae (CP-CRE) is an important element of the effort to prevent and contain the spread of these pathogens and an integral part of antimicrobial stewardship. All existing methods have limitations. A new, straightforward, inexpensive, and specific phenotypic method for the detection of carbapenemase production, the carbapenem inactivation method (CIM), was recently described. Here we describe a two-stage evaluation of a modified carbapenem inactivation method (mCIM), in which tryptic soy broth was substituted for water during the inactivation step and the length of this incubation was extended. A validation study was performed in a single clinical laboratory to determine the accuracy of the mCIM, followed by a nine-laboratory study to verify the reproducibility of these results and define the zone size cutoff that best discriminated between CP-CRE and members of the family Enterobacteriaceae that do not produce carbapenemases. Bacterial isolates previously characterized through whole-genome sequencing or targeted PCR as to the presence or absence of carbapenemase genes were tested for carbapenemase production using the mCIM; isolates with Ambler class A, B, and D carbapenemases, non-CP-CRE isolates, and carbapenem-susceptible isolates were included. The sensitivity of the mCIM observed in the validation study was 99% (95% confidence interval [95% CI], 93% to 100%), and the specificity was 100% (95% CI, 82% to 100%). In the second stage of the study, the range of sensitivities observed across nine laboratories was 93% to 100%, with a mean of 97%; the range of specificities was 97% to 100%, with a mean of 99%. The mCIM was easy to perform and interpret for Enterobacteriaceae, with results in less than 24 h and excellent reproducibility across laboratories.

Comparison of Clostridium difficile minimum inhibitory concentrations obtained using agar dilution vs broth microdilution methods.

Due to increasing antibiotic resistance among anaerobic bacteria, routine antimicrobial susceptibility testing is recommended by the Clinical and Laboratory Standards Institute (CLSI). This study compared the minimum inhibitory concentrations (MICs) from 920 Clostridium difficile isolates tested against seven antimicrobial agents using the two current CLSI reference methodologies, agar dilution method, vs broth microdilution method. A subset of isolate testing was performed independently by two laboratories to evaluate reproducibility. A negative bias was noted for MICs generated from broth microdilution compared to agar dilution and the reproducibility was variable and drug dependent. Therefore, broth microdilution is not recommended as an alternative to agar dilution for C. difficile antimicrobial susceptibility testing.

Changes in the antibiotic susceptibility of anaerobic bacteria from 2007-2009 to 2010-2012 based on the CLSI methodology.

Antimicrobial susceptibility testing of anaerobic isolates was conducted at four independent sites from 2010 to 2012 and compared to results from three sites during the period of 2007-2009. This data comparison shows significant changes in antimicrobial resistance in some anaerobic groups. Therefore, we continue to recommend institutions regularly perform susceptibility testing when anaerobes are cultured from pertinent sites. Annual generation of an institutional-specific antibiogram is recommended for tracking of resistance trends over time.