Cleaning Tasks and Products and Asthma Among Health Care Professionals.

OBJECTIVE: Health care workers are at risk for work-related asthma, which may be affected by changes in cleaning practices. We examined associations of cleaning tasks and products with work-related asthma in health care workers in 2016, comparing them with prior results from 2003. METHODS: We estimated asthma prevalence by professional group and explored associations of self-reported asthma with job-exposure matrix-based cleaning tasks/products in a representative Texas sample of 9914 physicians, nurses, respiratory/occupational therapists, and nurse aides. RESULTS: Response rate was 34.8% (n = 2421). The weighted prevalence rates of physician-diagnosed (15.3%), work-exacerbated (4.1%), and new-onset asthma (6.7%) and bronchial hyperresponsiveness symptoms (31.1%) were similar to 2003. New-onset asthma was associated with building surface cleaning (odds ratio [OR], 1.91; 95% confidence interval [CI], 1.10-3.33), use of ortho-phthalaldehyde (OR, 1.77; 95% CI, 1.15-2.72), bleach/quaternary compounds (OR, 1.91; 95% CI, 1.10-3.33), and sprays (OR, 1.97; 95% CI, 1.12-3.47). CONCLUSION: Prevalence of asthma/bronchial hyperresponsiveness seems unchanged, whereas associations of new-onset asthma with exposures to surface cleaning remained, and decreased for instrument cleaning.

Effects of Road Traffic on the Accuracy and Bias of Low-Cost Particulate Matter Sensor Measurements in Houston, Texas.

Although PM2.5 measurements of low-cost particulate matter sensors (LCPMS) generally show moderate and strong correlations with those from research-grade air monitors, the data quality of LCPMS has not been fully assessed in urban environments with different road traffic conditions. We examined the linear relationships between PM2.5 measurements taken by an LCPMS (Dylos DC1700) and two research grade monitors, a personal environmental monitor (PEM) and the GRIMM 11R, in three different urban environments, and compared the accuracy (slope) and bias of these environments. PM2.5 measurements were carried out at three locations in Houston, Texas (Clinton Drive largely with diesel trucks, US-59 mostly with gasoline vehicles, and a residential home with no major sources of traffic emissions nearby). The slopes of the regressions of the PEM on Dylos and Grimm measurements varied by location (e.g., PEM/Dylos slope at Clinton Drive = 0.98 (R2 = 0.77), at US-59 = 0.63 (R2 = 0.42), and at the residence = 0.29 (R2 = 0.31)). Although the regression slopes and coefficients differed across the three urban environments, the mean percent bias was not significantly different. Using the correct slope for LCPMS measurements is key for accurately estimating ambient PM2.5 mass in urban environments.

Effects of aerosol particle size on the measurement of airborne PM2.5 with a low-cost particulate matter sensor (LCPMS) in a laboratory chamber.

Previous validation studies found a good linear correlation between the low-cost particulate matter sensors (LCPMS) and other research grade particulate matter (PM) monitors. This study aimed to determine if different particle size bins of PM would affect the linear relationship and agreement between the Dylos DC1700 (LCPMS) particle count measurements (converted to PM2.5 mass concentrations) and the Grimm 11R (research grade instrument) mass concentration measurements. Three size groups of PM2.5 (mass median aerodynamic diameters (MMAD): < 1 µm, 1-2 µm, and > 2 µm) were generated inside a laboratory chamber, controlled for temperature and relative humidity, by dispersing sodium chloride crystals through a nebulizer. A linear regression comparing 1-min average PM2.5 particle counts from the Dylos DC1700 (Dylos) to the Grimm 11R (Grimm) mass concentrations was estimated by particle size group. The slope for the linear regression was found to increase as MMAD increased (< 1 µm, 0.75 (R2 = 0.95); 1-2 µm, 0.90 (R2 = 0.93); and > 2 µm, 1.03 (R2 = 0.94). The linear slopes were used to convert Dylos counts to mass concentration, and the agreement between converted Dylos mass and Grimm mass was estimated. The absolute relative error between converted Dylos mass and the Grimm mass was smaller in the < 1 µm group (16%) and 1-2 µm group (16%) compared to the > 2 µm group (32%). Therefore, the bias between converted Dylos mass and Grimm mass varied by size group. Future studies examining particle size bins over a wider range of coarse particles (> 2.5 µm) would provide useful information for accurately converting LCPMS counts to mass concentration.

A heavy metal baseline score predicts outcome in acute myeloid leukemia.

Despite abundant epidemiological data linking metals to leukemia and other cancers, baseline values of toxic and essential metals in patients with leukemia and the clinical impact of these metals remain unknown. Thus, we sought to quantify metal values in untreated patients with acute myeloid leukemia (AML) and controls and determine the impact of metal values on AML patients' survival. Serum samples from patients with untreated AML and controls at Hospices Civils de Lyon were analyzed and compared for trace metals and copper isotopic abundance ratios with inductively coupled plasma mass spectrometry. Survival analysis was performed as a function of metal values, and a multi-metal score was developed for patients with AML. Serum samples were collected from 67 patients with untreated AML and 94 controls. Most patients had intermediate-risk cytogenetics (63.1%) without FLT3 internal tandem duplication mutations (75.6%) or NPM1 mutations (68.1%). Most metal values differed significantly between AML and control groups. Patients with lower magnesium and higher cadmium values had the worst survival rates, with only 36% surviving at 6 months (P = .001). The adverse prognostic effect of this combination was maintained on multivariate analysis. Based on this, we developed a novel metal score, which accounts for multiple relative abnormalities in the values of five toxic and five essential metals. Patients with a higher metal score had significantly worse survival, which was maintained on multivariate analysis (P = .03). This baseline metal scoring system was also prognostic when we applied it to a separate population of front-line AML patients.

Assessing postdisaster psychological stress in hazardous waste operations and emergency response (HAZWOPER) workers.

OBJECTIVE: To assess the prevalence of traumatic stress experienced by secondary responders to disaster events to determine if mental health education should be included in HAZWOPER training. METHODS: Preexisting survey tools for assessing posttraumatic stress disorder (PTSD), resiliency, and mental distress were combined to form a web-based survey tool that was distributed to individuals functioning in secondary response roles. Data were analyzed using the Fisher exact test, 1-way ANOVA, and 1-sample t tests. RESULTS: Respondents reported elevated PTSD levels (32.9%) as compared to the general population. HAZWOPER-trained responders with disaster work experience were more likely to be classified as PTSD positive as compared to untrained, inexperienced responders and those possessing only training or experience. A majority (68.75%) scored below the mean resiliency level of 80.4 on the Connor-Davidson Resilience Scale. Respondents with only training or both training and experience were more likely to exhibit lower resiliency scores than those with no training or experience. PTSD positivity correlated with disaster experience. Among respondents, 91% indicated support for mental health education. CONCLUSIONS: Given the results of the survey, consideration should be given to the inclusion of pre- and postdeployment mental health education in the HAZWOPER training regimen.

Occupational risk factors and asthma among health care professionals.

RATIONALE: Recent U.S. data suggest an increased risk of work-related asthma among health care workers, yet only a few specific determinants have been elucidated. OBJECTIVES: To evaluate associations of asthma prevalence with occupational exposures in a cross-sectional survey of health care professionals. METHODS: A detailed questionnaire was mailed to a random sample (n=5,600) of all Texas physicians, nurses, respiratory therapists, and occupational therapists with active licenses in 2003. Information on asthma symptoms and nonoccupational asthma risk factors obtained from the questionnaire was linked to occupational exposures derived through an industry-specific job-exposure matrix. MEASUREMENTS: There were two a priori defined outcomes: (1) physician-diagnosed asthma with onset after entry into health care ("reported asthma") and (2) "bronchial hyperresponsiveness-related symptoms," defined through an 8-item symptom-based predictor. MAIN RESULTS: Overall response rate was 66%. The final study population consisted of 862 physicians, 941 nurses, 968 occupational therapists, and 879 respiratory therapists (n=3,650). Reported asthma was associated with medical instrument cleaning (odds ratio [OR], 2.22; 95% confidence interval [CI], 1.34-3.67), general cleaning (OR, 2.02; 95% CI, 1.20-3.40), use of powdered latex gloves between 1992 and 2000 (OR, 2.17; 95% CI, 1.27-3.73), and administration of aerosolized medications (OR, 1.72; 95% CI, 1.05-2.83). The risk associated with latex glove use was not apparent after 2000. Bronchial hyperresponsiveness-related symptoms were associated with general cleaning (OR, 1.63; 95% CI, 1.21-2.19), aerosolized medication administration (OR, 1.40; 95% CI, 1.06-1.84), use of adhesives on patients (OR, 1.65; 95% CI, 1.22-2.24), and exposure to a chemical spill (OR, 2.02; 95% CI, 1.28-3.21). CONCLUSIONS: The contribution of occupational exposures to asthma in health care professionals is not trivial, meriting both implementation of appropriate controls and further study.

A global survey of occupational health competencies and curriculum.

The World Health Organization has identified a worldwide shortage of occupational health professionals, but evidence suggests that the work and education of these professionals vary across countries. This survey examined the professional development of occupational physicians, occupational nurses, industrial hygienists, and ergonomists in terms of practice competencies and academic curriculum. Of 89 countries that received the survey, 48 (54%) responded. Important differences in competencies and curricula were identified for all groups. More competencies were identified more frequently in developed countries. Academic programs existed more often in developed countries, but curriculum contents varied. The study provides a concrete reference point for discussion and development of competencies and curriculum.