SrMo0.9O3-δ Perovskite with Segregated Ru Nanoparticles Performing as Anode in Solid Oxide Fuel Cells.

A new anode material, Ru-SrMo0.9O3-δ, with a perovskite structure and segregated metallic Ru, has been tested in an intermediate-temperature solid oxide fuel cell (IT-SOFC) in an electrolyte-supported configuration giving substantial power densities as high as 840 mW/cm2 at 850 °C using pure H2 as fuel. This material has been prepared by the citrate method and structurally and microstructurally characterized at room temperature by different techniques such as X-ray diffraction (XRD), neutron powder diffraction (NPD), scanning electron microscopy (SEM), and scanning transmission electron microscopy (STEM). NPD was very useful to determine oxygen positions and vacancies, unveiling a cubic and oxygen-deficient perovskite SrMo0.9O3-δ oxide with a Pm-3m space group and potential ionic mobility. On the other hand, SEM and STEM studies have allowed to identify metallic segregated Ru nanoparticles providing the material with an excellent catalytic activity. Other properties such as the thermal expansion coefficient (TEC) and chemical compatibility with other cell components or electrical conductivity have also been studied to understand the excellent performance of this material as anode in IT-SOFC and correlate it with the crystallographic structure.

Bi2CoO2F4-A Polar, Ferrimagnetic Aurivillius Oxide-Fluoride.

Aurivillius oxides have been a research focus due to their ferroelectric properties, but by replacing oxide ions by fluoride, divalent magnetic cations can be introduced, giving Bi2 MO2F4 (M = Fe, Co, and Ni). Our combined experimental and computational study on Bi2CoO2F4 indicates a low-temperature polar structure of P21 ab symmetry (analogous to ferroelectric Bi2WO6) and a ferrimagnetic ground state. These results highlight the potential of Aurivillius oxide-fluorides for multiferroic properties. Our research has also revealed some challenges associated with the reduced tendency for polar displacements in the more ionic fluoride-based systems.

Al-Doped SrMoO3 Perovskites as Promising Anode Materials in Solid Oxide Fuel Cells.

Two perovskite materials with SrMo1-xAlxO3-δ (x = 0.1, 0.2) compositions have been synthesized by reduction from the corresponding scheelite phases, with SrMo1-xAlxO4-δ stoichiometry; the pertinent characterization shows that the defective perovskites can be used as anode materials in solid oxide fuel cells, providing maximum output power densities of 633 mW/cm2 for x = 0.2. To correlate structure and properties, a neutron powder diffraction investigation was carried out for both perovskite and scheelite phases. Both perovskites are cubic, defined in the Pm-3m space group, displaying a random distribution of Mo and Al cations over the 1a sites of the structure. The introduction of Al at Mo positions produced conspicuous amounts of oxygen vacancies in the perovskite, detected by neutrons. This is essential to induce ionic diffusion, providing a mixed ionic and electronic conduction (MIEC), since in MIEC electrodes, charge carriers are combined in one single phase and the ionic conductivity can be one order of magnitude higher than in a conventional material. The thermal expansion coefficients of the reduced and oxidized samples demonstrated that these materials perfectly match with the La0.8Sr0.2Ga0.83Mg0.17O3-δ electrolyte, La0.4Ce0.6O2-δ buffer layer and other components of the cell. Scanning electron microscopy after the test in a real solid oxide fuel cell showed a very dense electrolyte and porous electrodes, essential requirements for this type of fuel. SrMo1-xAlxO3-δ perovskites are, thus, a good replacement of conventional biphasic cermet anodes in solid oxide fuel cells.

Tuning between Proper and Hybrid-Improper Mechanisms for Polar Behavior in CsLn 2Ti2NbO10 Dion-Jacobson Phases.

The Dion-Jacobson (DJ) family of perovskite-related materials have recently attracted interest due to their polar structures and properties, resulting from hybrid-improper mechanisms for ferroelectricity in n = 2 systems and from proper mechanisms in n = 3 CsBi2Ti2NbO10. We report here a combined experimental and computational study on analogous n = 3 CsLn 2Ti2NbO10 (Ln = La, Nd) materials. Density functional theory calculations reveal the shallow energy landscape in these systems and give an understanding of the competing structural models suggested by neutron and electron diffraction studies. The structural disorder resulting from the shallow energy landscape breaks inversion symmetry at a local level, consistent with the observed second-harmonic generation. This study reveals the potential to tune between proper and hybrid-improper mechanisms by composition in the DJ family. The disorder and shallow energy landscape have implications for designing functional materials with properties reliant on competing low-energy phases such as relaxors and antiferroelectrics.

Design, Synthesis, Structure and Properties of Ba-Doped Derivatives of SrCo0.95Ru0.05O3-δ Perovskite as Cathode Materials for SOFCs.

We have designed and prepared a novel cathode material for solid oxide fuel cell (SOFC) based on SrCo0.95Ru0.05O3-δ perovskite. We have partially replaced Sr by Ba in Sr0.9Ba0.1Co0.95Ru0.05O3-δ (SBCRO) in order to expand the unit-cell size, thereby improving the ionic diffusion of O2- through the crystal lattice. The characterization of this new oxide has been studied at room temperature by X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments. At room temperature, SBCRO perovskite crystallizes in the P4/mmm tetragonal space group, as observed from NDP data. The maximum conductivity value of 18.6 S cm-1 is observed at 850 °C. Polarization resistance measurements on LSGM electrolyte demonstrate an improvement in conductivity with respect to the parent Sr-only perovskite cathode. A good chemical compatibility and an adequate thermal expansion coefficient make this oxide auspicious for using it as a cathode in SOFC.

Mn2CoReO6: a robust multisublattice antiferromagnetic perovskite with small A-site cations.

Mn2CoReO6, the fourth known magnetic transition-metal-only double perovskite oxide (space group P21/n) was synthesized at high pressure and temperature (8 GPa, 1350 °C). Large structural distortions are induced by the small A-site Mn2+ cations. Mn2CoReO6 exhibits complex magnetic properties with a robust antiferromagnetic order (TN = 94 K) involving all cation sublattices.

Tuning octahedral tilts and the polar nature of A-site deficient perovskites.

Herein we highlight the ability to tune the structural chemistry of A-site deficient perovskite materials Ln1/3NbO3. Computational studies explore the balance between proper and hybrid-improper mechanisms for polar behaviour in these systems.

Nb5+-Doped SrCoO3-δ Perovskites as Potential Cathodes for Solid-Oxide Fuel Cells.

SrCoO3-δ outperforms as cathode material in solid-oxide fuel cells (SOFC) when the three-dimensional (3C-type) perovskite structure is stabilized by the inclusion of highly-charged transition-metal ions at the octahedral positions. In a previous work we studied the Nb incorporation at the Co positions in the SrCo1-xNbxO3-δ system, in which the stabilization of a tetragonal P4/mmm perovskite superstructure was described for the x = 0.05 composition. In the present study we extend this investigation to the x = 0.10-0.15 range, also observing the formation of the tetragonal P4/mmm structure instead of the unwanted hexagonal phase corresponding to the 2H polytype. We also investigated the effect of Nb5+ doping on the thermal, electrical, and electrochemical properties of SrCo1-xNbxO3-δ (x = 0.1 and 0.15) perovskite oxides performing as cathodes in SOFC. In comparison with the undoped hexagonal SrCoO3-δ phase, the resulting compounds present high thermal stability and an increase of the electrical conductivity. The single-cell tests for these compositions (x = 0.10 and 0.15) with La0.8Sr0.2Ga0.83Mg0.17O3-δ (LSGM) as electrolyte and SrMo0.8Fe0.2CoO3-δ as anode gave maximum power densities of 693 and 550 mW∙cm-2 at 850 °C respectively, using pure H2 as fuel and air as oxidant.

Novel Mg-Doped SrMoO3 Perovskites Designed as Anode Materials for Solid Oxide Fuel Cells.

SrMo1-xMxO3-δ (M = Fe and Cr, x = 0.1 and 0.2) oxides have been recently described as excellent anode materials for solid oxide fuel cells at intermediate temperatures (IT-SOFC) with LSGM as the electrolyte. In this work, we have improved their properties by doping with aliovalent Mg ions at the B-site of the parent SrMoO3 perovskite. SrMo1-xMgxO3-δ (x = 0.1, 0.2) oxides have been prepared, characterized and tested as anode materials in single solid-oxide fuel cells, yielding output powers near 900 mW/cm-2 at 850 °C using pure H2 as fuel. We have studied its crystal structure with an "in situ" neutron power diffraction (NPD) experiment at temperatures as high as 800 °C, emulating the working conditions of an SOFC. Adequately high oxygen deficiencies, observed by NPD, together with elevated disk-shaped anisotropic displacement factors suggest a high ionic conductivity at the working temperatures. Furthermore, thermal expansion measurements, chemical compatibility with the LSGM electrolyte, electronic conductivity and reversibility upon cycling in oxidizing-reducing atmospheres have been carried out to find out the correlation between the excellent performance as an anode and the structural features.