Nominally identical microplastic models differ greatly in their particle-cell interactions.

Due to the abundance of microplastics in the environment, research about its possible adverse effects is increasing exponentially. Most studies investigating the effect of microplastics on cells still rely on commercially available polystyrene microspheres. However, the choice of these model microplastic particles can affect the outcome of the studies, as even nominally identical model microplastics may interact differently with cells due to different surface properties such as the surface charge. Here, we show that nominally identical polystyrene microspheres from eight different manufacturers significantly differ in their ζ-potential, which is the electrical potential of a particle in a medium at its slipping plane. The ζ-potential of the polystyrene particles is additionally altered after environmental exposure. We developed a microfluidic microscopy platform to demonstrate that the ζ-potential determines particle-cell adhesion strength. Furthermore, we find that due to this effect, the ζ-potential also strongly determines the internalization of the microplastic particles into cells. Therefore, the ζ-potential can act as a proxy of microplastic-cell interactions and may govern adverse effects reported in various organisms exposed to microplastics.

Molecular origins of Epoxy-Amine/Iron oxide interphase formation.

HYPOTHESIS: Interphase properties in composites, adhesives and protective coatings can be predicted on the basis of interfacial interactions between polymeric precursor molecules and the inorganic surface during network formation. The strength of molecular interactions is expected to determine local segmental mobility (polymer glass transition temperature, Tg) and cure degree. EXPERIMENTS: Conventional analysis techniques and atomic force microscopy coupled with infrared (AFM-IR) are applied to nanocomposite specimens to precisely characterise the epoxy-amine/iron oxide interphase, whilst molecular dynamics simulations are applied to identify the molecular interactions underpinning its formation. FINDINGS: Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and high-resolution AFM-IR mapping confirm the presence of nanoscale under-cured interphase regions. Interfacial segregation of the molecular triethylenetetraamine (TETA) cross-linker results in an excess of epoxy functionality near synthetic hematite, (Fe2O3) magnetite (Fe3O4) and goethite (Fe(O)OH) particle surfaces. This occurs independently of the variable surface binding energies, as a result of entropic segregation during the cure. Thermal analysis and molecular dynamics simulations demonstrate that restricted segmental motion is imparted by strong interfacial binding between surface Fe sites in goethite, where the position of surface hydroxyl protons enables synergistic hydrogen bonding and electrostatic binding to Fe atoms at specific sites. This provides a strong driving force for molecular orientation resulting in significantly raised Tg values for the goethite composite samples.

Fibrous Scaffolds for Muscle Tissue Engineering Based on Touch-Spun Poly(Ester-Urethane) Elastomer.

Development of fiber-spinning technologies and materials with proper mechanical properties is highly important for the manufacturing of aligned fibrous scaffolds mimicking structure of the muscle tissues. Here, the authors report touch spinning of a thermoplastic poly(1,4-butylene adipate)-based polyurethane elastomer, obtained via solvent-free polymerization. This polymer possesses a combination of important advantages such as 1) low elastic modulus in the range of a few MPa, 2) good recovery ratio and 3) resilience, 4) processability, 5) nontoxicity, 6) biocompatibility, and 7) biodegradability that makes it suitable for fabrication of structures mimicking extracellular matrix of muscle tissue. Touch spinning allows fast and precise deposition of highly aligned micro- and nano-fibers without use of high voltage. C2C12 myoblasts readily align along soft polymer fibers and demonstrate high viability as well as proliferation that make proposed combination of polymer and fabrication method highly suitable for engineering skeletal muscles.

Impact of surface charge on the motion of light-activated Janus micromotors.

Control over micromotors' motion is of high relevance for lab-on-a-chip and biomedical engineering, wherein such particles encounter complex microenvironments. Here, we introduce an efficient way to influence Janus micromotors' direction of motion and speed by modifying their surface properties and those of their immediate surroundings. We fabricated light-responsive Janus micromotors with positive and negative surface charge, both driven by ionic self-diffusiophoresis. These were used to observe direction-of-motion reversal in proximity to glass substrates for which we varied the surface charge. Quantitative analysis allowed us to extract the dependence of the particle velocity on the surface charge density of the substrate. This constitutes the first quantitative demonstration of the substrate's surface charge on the motility of the light-activated diffusiophoretic motors in water. We provide qualitative understanding of these observations in terms of osmotic flow along the substrate generated through the ions released by the propulsion mechanism. Our results constitute a crucial step in moving toward practical application of self-phoretic artificial micromotors.

4D Biofabrication Using a Combination of 3D Printing and Melt-Electrowriting of Shape-Morphing Polymers.

We report the fabrication of scroll-like scaffolds with anisotropic topography using 4D printing based on a combination of 3D extrusion printing of methacrylated alginate, melt-electrowriting of polycaprolactone fibers, and shape-morphing of the fabricated object. A combination of 3D extrusion printing and melt-electrowriting allows programmed deposition of different materials and fabrication of structures with high resolution. Shape-morphing allows the transformation of a patterned surface of a printed structure in a pattern on inner surface of a folded object that is used to align cells. We demonstrate that the concentration of calcium ions, the environment media, and the geometrical shape of the scaffold influences shape-morphing that allows it to be efficiently programmed. Myoblasts cultured inside a scrolled bilayer scaffold demonstrate excellent viability and proliferation. Moreover, the patterned surface generated by PCL fibers allow a very high degree of orientation of cells, which cannot be achieved on the alginate layer without fibers.

Shape-Morphing Fibrous Hydrogel/Elastomer Bilayers Fabricated by a Combination of 3D Printing and Melt Electrowriting for Muscle Tissue Regeneration.

This paper reports an approach for the fabrication of shape-changing bilayered scaffolds, which allow the growth of aligned skeletal muscle cells, using a combination of 3D printing of hyaluronic acid hydrogel, melt electrowriting of thermoplastic polycaprolactone-polyurethane elastomer, and shape transformation. The combination of the selected materials and fabrication methods allows a number of important advantages such as biocompatibility, biodegradability, and suitable mechanical properties (elasticity and softness of the fibers) similar to those of important components of extracellular matrix (ECM), which allow proper cell alignment and shape transformation. Myoblasts demonstrate excellent viability on the surface of the shape-changing bilayer, where they occupy space between fibers and align along them, allowing efficient cell patterning inside folded structures. The bilayer scaffold is able to undergo a controlled shape transformation and form multilayer scroll-like structures with cells encapsulated inside. Overall, the importance of this approach is the fabrication of tubular constructs with a patterned interior that can support the proliferation and alignment of muscle cells for muscle tissue regeneration.

4D Biofabrication of fibrous artificial nerve graft for neuron regeneration.

In this paper, we describe the application of the 4D biofabrication approach for the fabrication of artificial nerve graft. Bilayer scaffolds consisting of uniaxially aligned polycaprolactone-poly(glycerol sebacate) (PCL-PGS) and randomly aligned methacrylated hyaluronic acid (HA-MA) fibers were fabricated using electrospinning and further used for the culture of PC-12 neuron cells. Tubular structures form instantly after immersion of fibrous bilayer in an aqueous buffer and the diameter of obtained tubes can be controlled by changing bilayer parameters such as the thickness of each layer, overall bilayer thickness, and medium counterion concentration. Designed scaffolds showed a self-folded scroll-like structure with high stability after four weeks of real-time degradation. The significance of this research is in the fabrication of tuneable tubular nerve guide conduits that can simplify the current existing clinical treatment of neural injuries.

Impact of Bioactive Peptide Motifs on Molecular Structure, Charging, and Nonfouling Properties of Poly(ethylene oxide) Brushes.

Polymer layers capable of suppressing protein adsorption from biological media while presenting extracellular matrix-derived peptide motifs offer valuable new options for biomimetic surface engineering. Herein, we provide detailed insights into physicochemical changes induced in a nonfouling poly(ethylene oxide) (PEO) brush/polydopamine (PDA) system by incorporation of adhesion ligand (RGD) peptides. Brushes with high surface chain densities (σ ≥ 0.5 chains·nm-2) and pronounced hydrophilicity (water contact angles ≤ 10°) were prepared by end-tethering of heterobifunctional PEOs ( Mn ≈ 20 000 g·mol-1) to PDA-modified surfaces from a reactive melt. Using alkyne distal end group on the PEO chains, azidopentanoic-bearing peptides were coupled through a copper-catalyzed Huisgen azide-alkyne "click" cycloaddition reaction. The surface concentration of RGD was tuned from complete saturation of the PEO surface with peptides (1.7 × 105 fmol·cm-2) to values which may induce distinct differences in cell adhesion (<6.0 × 102 fmol·cm-2). Infrared reflection-absorption and X-ray photoelectron spectroscopies proved the PDA-PEO layers covalent structure and the immobilization of RGD peptides. The complete reconstruction of experimental electrohydrodynamics data utilizing mean-field theory predictions further verified the attained brush structure of the end-tethered PEO chains which provided hydrodynamic screening of the PDA anchor. Increasing the surface concentration of immobilized RGD peptides led to increased interfacial charging. Supported by simulations, this observation was attributed to the ionization of functional groups in the amino acid sequence and to the pH-dependent adsorption of water ions (OH- > H3O+) from the electrolyte. Despite the distinct differences observed in the electrokinetic analysis of the surfaces bearing different amounts of RGD, it was found that the peptide presence on PEO(20 000)-PDA layers does not have a significant effect on the nonfouling properties of the system. Notably, the presented PEO(20 000)-PDA layers bearing RGD peptides in the surface concentration range 5.9 to 1.7 × 105 fmol·cm-2 reduced the protein adsorption from fetal bovine serum to less than 30 ng·cm-2, that is, values comparable to the ones obtained for pristine PEO(20 000)-PDA layers.