High Energy Density Lithium-Sulfur Batteries Based on Carbonaceous Two-Dimensional Additive Cathodes.

The increasing demand for electrical energy storage makes it essential to explore alternative battery chemistries that overcome the energy-density limitations of the current state-of-the-art lithium-ion batteries. In this scenario, lithium-sulfur batteries (LSBs) stand out due to the low cost, high theoretical capacity, and sustainability of sulfur. However, this battery technology presents several intrinsic limitations that need to be addressed in order to definitively achieve its commercialization. Herein, we report the fruitfulness of three different formulations using well-selected functional carbonaceous additives for sulfur cathode development, an in-house synthesized graphene-based porous carbon (ResFArGO), and a mixture of commercially available conductive carbons (CAs), as a facile and scalable strategy for the development of high-performing LSBs. The additives clearly improve the electrochemical properties of the sulfur electrodes due to an electronic conductivity enhancement, leading to an outstanding C-rate response with a remarkable capacity of 2 mA h cm-2 at 1C and superb capacities of 4.3, 4.0, and 3.6 mA h cm-2 at C/10 for ResFArGO10, ResFArGO5, and CAs, respectively. Moreover, in the case of ResFArGO, the presence of oxygen functional groups enables the development of compact high sulfur loading cathodes (>4 mgS cm-2) with a great ability to trap the soluble lithium polysulfides. Notably, the scalability of our system was further demonstrated by the assembly of prototype pouch cells delivering excellent capacities of 90 mA h (ResFArGO10 cell) and 70 mA h (ResFArGO5 and CAs cell) at C/10.

Dehydrofluorination Process of Poly(vinylidene difluoride) PVdF-Based Gel Polymer Electrolytes and Its Effect on Lithium-Sulfur Batteries.

Gel polymer electrolytes (GPEs) are emerging as suitable candidates for high-performing lithium-sulfur batteries (LSBs) due to their excellent performance and improved safety. Within them, poly(vinylidene difluoride) (PVdF) and its derivatives have been widely used as polymer hosts due to their ideal mechanical and electrochemical properties. However, their poor stability with lithium metal (Li0) anode has been identified as their main drawback. Here, the stability of two PVdF-based GPEs with Li0 and their application in LSBs is studied. PVdF-based GPEs undergo a dehydrofluorination process upon contact with the Li0. This process results in the formation of a LiF-rich solid electrolyte interphase that provides high stability during galvanostatic cycling. Nevertheless, despite their outstanding initial discharge, both GPEs show an unsuitable battery performance characterized by a capacity drop, ascribed to the loss of the lithium polysulfides and their interaction with the dehydrofluorinated polymer host. Through the introduction of an intriguing lithium salt (lithium nitrate) in the electrolyte, a significant improvement is achieved delivering higher capacity retention. Apart from providing a detailed study of the hitherto poorly characterized interaction process between PVdF-based GPEs and the Li0, this study demonstrates the need for an anode protection process to use this type of electrolytes in LSBs.

Improvement of Lithium Metal Polymer Batteries through a Small Dose of Fluorinated Salt.

Introducing a small dose of an electrolyte additive into solid polymer electrolytes (SPEs) is an appealing strategy for improving the quality of the solid-electrolyte-interphase (SEI) layer formed on the lithium metal (Li°) anode, thereby extending the cycling life of solid-state lithium metal batteries (SSLMBs). In this work, we report a new type of SPEs comprising a low-cost, fluorine-free salt, lithium tricyanomethanide, as the main conducting salt and a fluorinated salt, lithium bis(fluorosulfonyl)imide (LiFSI), as the electrolyte additive for enhancing the performance of SPE-based SSLMBs. Our results demonstrate that a homogeneous and stable SEI layer is readily formed on the surface of the Li° electrode through the preferential reductive decomposition of LiFSI, and consequently, the cycle stabilities of Li°||Li° and Li°||LiFePO4 cells are significantly improved after the incorporation of LiFSI as an additive. The intriguing chemistry of the salt anion revealed in this work may expedite the large-scale implementation of SSLMBs in the near future.