Can Asymmetry in Total Knee Arthroplasty Design Lead to More Normal-Like Postoperative Kinematics? A Multi-Implant Evaluation.

BACKGROUND: Few studies have evaluated the effects of symmetrical versus asymmetrical implant designs, more specifically the femoral condyles, trochlear groove, joint line, and bearing surfaces. The objective of this study was to investigate multiple posterior cruciate-retaining (PCR) total knee arthroplasty (TKA) designs influencing factors related to TKA asymmetry, and to investigate whether asymmetry can improve postoperative knee kinematics. METHODS: In vivo tibio-femoral kinematics for 99 subjects was evaluated in this retrospective study. Overall, 10 subjects had a nonimplanted, normal knee, and 89 subjects had 1 of 3 PCR TKAs with varying degrees of asymmetry within their femoral and tibial components (PCR #1 = 30, PCR #2 = 29, PCR #3 = 30). All TKAs were implanted by the same surgeon and were analyzed using fluoroscopy during a deep knee bend. RESULTS: At full extension, all 3 PCR TKAs experienced a more posteriorized position of the femoral condyles compared to the normal knee, with the 2 asymmetrical PCR TKAs experiencing more anteriorization compared to the third, symmetrical PCR TKA. Both the normal knee and the PCR TKA with greatest amount of asymmetry experienced statistically more posterior femoral rollback of the lateral condyle than the other 2 PCR TKAs. The PCR TKA with greater asymmetry also experienced statistically greater range of motion than the other 2 PCR TKAs. CONCLUSIONS: With increasing flexion, the design with the most asymmetry also experienced the most posterior femoral rollback, axial rotation, and greatest range of motion. The results in this study seem to suggest that the inclusion of asymmetry in a TKA could be beneficial for achieving more normal-like kinematics and greater weight-bearing knee flexion.

Knee biomechanics of patients with total knee replacement during downhill walking on different slopes.

PURPOSE: The purpose of this study was to compare knee biomechanics of the replaced limb to the non-replaced limb of total knee replacement (TKR) patients and healthy controls during walking on level ground and on decline surfaces of 5°, 10°, and 15°. METHODS: Twenty-five TKR patients and 10 healthy controls performed 5 walking trials on different decline slopes on a force platform and an instrumented ramp system. Two analyses of variance, 2 × 2 (limb × group) and 2 × 4 (limb × decline slope), were used to examine selected biomechanics variables. RESULTS: The replaced limb of TKR patients had lower peak loading-response and push-off knee extension moment than the non-replaced and the matched limb of healthy controls. No differences were found in loading-response and push-off knee internal abduction moments among replaced, non-replaced, and matched limb of healthy controls. The knee flexion range of motion, peak loading-response vertical ground reaction force, and peak knee extension moment increased across all slope comparisons between 0° and 15° in both the replaced and non-replaced limb of TKR patients. CONCLUSION: Downhill walking may not be appropriate to include in early stage rehabilitation exercise protocols for TKR patients.

Altered biomechanics in bilateral total knee replacement patients during stair negotiation.

BACKGROUND: Many total knee replacement (TKR) patients need to have a contralateral knee replacement. Biomechanical differences between first and second replaced limbs of bilateral TKR have not been examined during stair negotiation. Additionally, it is unknown whether hip and ankle biomechanics of bilateral patients are altered. We examined hip, knee, and ankle biomechanics of first and second replaced limbs bilateral patients, as well as replaced and non-replaced limbs of unilateral patients, during stair ascent and descent. METHODS: Eleven bilateral TKR patients (70.09 ± 5.41 years, 1.71 ± 0.08 m, 91.78 ± 13.00 kg) and 15 unilateral TKR patients (64.93 ± 5.11 years, 1.75 ± 0.09 m, 89.18 ± 17.55 kg) were recruited. Patients performed three to five trials of stair ascent and descent. The second step, during ascent, was the step of interest when analyzing each limb. A 2 × 2 (limb × group) analysis of variance was performed to determine differences between limbs and groups. RESULTS: During ascent, bilateral patients exhibited decreased peak loading-response knee extension (KEM) and push-off plantarflexion moments. Unilateral replaced limb KEM was lower than non-replaced limbs. During descent, bilateral patients descended the staircase significantly slower, had lower peak loading-response vertical ground reaction force and KEM, and push-off KEM. Bilateral patients had higher peak loading-response hip extension and push-off plantarflexion moments, and increased knee adduction ROM, compared with unilateral TKA patients. CONCLUSIONS: Bilateral patients exhibited similar hip, knee, and ankle joint moments between first and second replaced limbs. Substantial differences in hip, knee, and ankle biomechanics during stair negotiation in bilateral patients compared with unilateral patients may indicate a more complex adaptation strategy present in these patients.

Increased knee loading in stair ambulation in patients dissatisfied with their total knee replacement.

BACKGROUND: Total knee replacement patients have shown reductions in knee flexion range of motion, knee extensor moments, and gait speed during stair ascent and stair descent. However, it is unknown how patients dissatisfied with their total knee replacement differ from those who are satisfied during more difficult activities such as stair negotiation. Therefore, the purpose of this study was to compare knee biomechanics of patients who are dissatisfied with their joint replacement to those who are satisfied and healthy participants during stair negotiation. METHODS: Nine dissatisfied, fifteen satisfied patients and fifteen healthy participants participated, completing stair ascent and descent trials on an instrumented staircase. A 2 × 3 ANOVA was used to analyze biomechanical differences between groups and limbs during both activities. FINDINGS: The dissatisfied group showed reduced 2nd peak vertical GRF (P ≤ 0.0040) and loading-response knee extension moments (P ≤ 0.0041) in their operated limb compared to their non-operated limb and to satisfied and healthy groups during stair ascent. First peak vertical GRF (P < 0.0088) and both loading-response (P < 0.0117) and push-off abduction moments (P < 0.0028) showed reduced values in operated limbs compared to non-operated limbs for all groups. During stair descent, the dissatisfied group showed reduced loading-response and push-off knee extension moments (P ≤ 0.006) in their operated limb compared to their non-operated limb and the healthy group. The loading-response knee extension (P < 0.0379) and abduction moments (P ≤ 0.0048) were also reduced in the dissatisfied group compared to the satisfied group. INTERPRETATION: Patients who were dissatisfied showed asymmetrical loading of the knees in conjunction, which may have contributed to their dissatisfaction.

Midterm Performance of a Guided-Motion Bicruciate-Stabilized Total Knee System: Results From the International Study of Over 2000 Consecutive Primary Total Knee Arthroplasties.

BACKGROUND: The JOURNEY II Bi-Cruciate Stabilizing Total Knee System (BLINDED) is a second-generation guided-motion knee implant that has been used in over 100,000 primary total knee arthroplasties (TKAs) worldwide. However, performance information is limited. METHODS: Data for 2059 primary TKAs were abstracted at 7 US and 3 European sites. Estimates of cumulative incidence of revision were compared with registry data for cemented posterior-stabilized implants. RESULTS: Average age was 64.3 years (range, 18-91); 58.5% were females; and 12.3% TKAs were in subjects younger than 55 years. Patellae were resurfaced in 95.9%. Median time since primary TKA was 4.2 years; longest was 6.1 years; and 78.9% were 3 years or more since primary TKA. Of 67 revisions (3.2%), 20 (30%) involved femoral or tibial component removal compared to 42% in the Australian Joint Registry (Australian Orthopedic Association National Joint Replacement Registry). All-component revisions accounted for 15 of 67, femoral component only for 2 of 67, tibial component only for 3 of 67, patellar component with/without tibial insert exchange for 17 of 67, and isolated tibial insert exchange for 30 of 67. In addition, there were 18 reoperations without component exchange. Component revision indications were infection (33%), mechanical loosening (21%), fracture of bone around the joint (16%), and instability (15%). Kaplan-Meier revision estimate was 3.1 and 3.6 per 100 TKAs at 3 and 5 years, respectively, compared to Australian Orthopedic Association National Joint Replacement Registry estimates of 3.1 and 4.1 per 100 TKAs. CONCLUSION: The revision rate for the second-generation implant was similar to cemented posterior-stabilized registry controls.

Is knee biomechanics different in uphill walking on different slopes for older adults with total knee replacement?

The purpose of this study was to investigate knee biomechanics in uphill walking on slopes of 5°, 10° and 15° for total knee replacement (TKR) patients. Twenty-five post-TKR patients and ten healthy controls performed five walking trials on level ground and different slopes on an instrumented ramp system. A 2 × 2 × 4 (limb × group × incline slope) mixed model ANOVA was used to examine selected variables. The peak knee extension moment (KEM) was greater in 15° uphill walking compared to level, 5° and 10° uphill walking. TKR patients had lower peak KEM and smaller knee extension range of motion than healthy controls in all walking conditions. The Replaced Limb showed lower peak KEM in 10° and 15° uphill walking than the Non-replaced Limb and smaller knee extension range of motion (ROM) in 10° uphill walking. Knee extension and abduction ROM increased with increased incline angles. The greater peak loading-response vertical ground reaction force was found in level walking compared to three levels of uphill walking. The peak loading-response knee abduction moment was greater in level walking compared to 10° and 15° uphill walking. However, the medial knee contact force was greater in non-replaced limb compared to replaced limb in 10° and 15° uphill walking. The results suggest 5° uphill walking may have the potential to become a safe exercise for unilateral TKR patients.

What Is the Incidence of Cobalt-Chromium Damage Modes on the Bearing Surface of Contemporary Femoral Component Designs for Total Knee Arthroplasty?

BACKGROUND: The purpose of this study was to determine the incidence of metal release in contemporary total knee arthroplasty and the patient-related factors associated with this release. METHODS: In total, 256 retrieved cobalt-chromium femoral components were collected through a multi-institutional orthopedic implant retrieval program (implanted: 1-15 years). Implants were mainly revised for loosening (84/256), instability (62/256), and infection (46/256). Third-body damage was assessed using a semiquantitative scoring method. Microscale electro-corrosion damage (MECD) was evaluated using digital optical microscopy. Radii of curvature were measured from representative components to calculate anterior-posterior and medial-lateral ratios. Femoral component surface roughness was measured using a white light interferometer. Using a multivariable linear model, associations between damage score, implant, and patient factors were tested. Spearman's ρ correlation tests were performed to determine the association between roughness measurements and damage score. RESULTS: Mild to severe damage was observed in 52% (134/256) of the components. In the multivariable linear model, anterior-posterior ratio (ß = -8.07; P < .001), loosening (ß = -0.52; P = .006), and patient weight (ß = 0.01; P = .007) were associated with damage score. Suspected MECD damage was observed in 82% (209/256) of components. The Ra value (ρ = 0.196; P = .002) and Rq value (ρ = 0.157; P = .012) increased as the damage score increased. CONCLUSION: The findings of this retrieval study support that similar damage mechanisms exist in contemporary and long-term total knee arthroplasty devices. Additionally, we observed associations between loosening, anterior-posterior conformity, and patient weight with increased surface damage.

In Vivo Kinematic Comparison of a Bicruciate Stabilized Total Knee Arthroplasty and the Normal Knee Using Fluoroscopy.

BACKGROUND: The bicruciate stabilized (BCS) total knee arthroplasty (TKA) features asymmetrical bearing geometry and dual substitution for the anterior cruciate ligament and posterior cruciate ligament (PCL). Previous TKA designs have not fully replicated normal knee motion, and they are characterized by lower magnitudes of overall rollback and axial rotation than the normal knee. METHODS: In vivo kinematics were derived for 10 normal knees and 40-second generation BCS TKAs all implanted by a single surgeon. Mobile fluoroscopy and three-dimensional-to-two-dimensional registration was used to analyze anterior-posterior motion of the femoral condyles and femorotibial axial rotation during weight-bearing flexion. Statistical analysis was conducted at the 95% confidence level. RESULTS: From 0° to 30° of knee flexion, the BCS subjects exhibited similar patterns of femoral rollback and axial rotation compared to normal knee subjects. From 30° to 60° of knee flexion, BCS subjects experienced negligible anterior-posterior motions and axial rotation while normal knees continued to rollback and externally rotate. Between 60° and 90° the BCS resumed posterior motion and, after 90°, axial rotation increased in a normal-like fashion. CONCLUSION: Similarities in early flexion kinematics suggest that the anterior cam-post is supporting normal-like anterior-posterior motion in the BCS subjects. Likewise, lateral femoral rollback and external rotation of the femur in later flexion provides evidence for appropriate substitution of the PCL via the posterior cam-post. Being discrete in nature, the dual cam-post mechanism does not lend itself to adequate substitution of the cruciate ligaments in mid-flexion during which anterior cruciate ligament tension is decreasing and PCL tension is increasing in the normal knee.

Effects of toe-in and toe-in with wider step width on level walking knee biomechanics in varus, valgus, and neutral knee alignments.

BACKGROUND: Increased peak external knee adduction moments exist for individuals with knee osteoarthritis and varus knee alignments, compared to healthy and neutrally aligned counterparts. Walking with increased toe-in or increased step width have been individually utilized to successfully reduce 1st and 2nd peak knee adduction moments, respectfully, but have not previously been combined or tested among all alignment groups. The purpose of this study was to compare toe-in only and toe-in with wider step width gait modifications in individuals with neutral, valgus, and varus alignments. METHODS: Thirty-eight healthy participants with confirmed varus, neutral, or valgus frontal-plane knee alignment through anteroposterior radiographs, performed level walking in normal, toe-in, and toe-in with wider step width gaits. A 3×3 (group×intervention) mixed model repeated measures ANOVA compared alignment groups and gait interventions (p<0.05). RESULTS: The 1st peak knee adduction moment was reduced in both toe-in and toe-in with wider step width compared to normal gait. The 2nd peak adduction moment was increased in toe-in compared to normal and toe-in with wider step width. The adduction impulse was also reduced in toe-in and toe-in with wider step width compared to normal gait. Peak knee flexion and external rotation moments were increased in toe-in and toe-in with wider step width compared to normal gait. CONCLUSION: Although the toe-in with wider step width gait seems to be a viable option to reduce peak adduction moments for varus alignments, sagittal, and transverse knee loadings should be monitored when implementing this gait modification strategy.

Fretting and Corrosion Damage in Taper Adapter Sleeves for Ceramic Heads: A Retrieval Study.

BACKGROUND: During revision surgery with a well-fixed stem, a titanium sleeve can be used in conjunction with a ceramic head to achieve better stress distribution across the taper surface. In vitro testing suggests that corrosion is not a concern in sleeved ceramic heads; however, little is known about the in vivo fretting corrosion of the sleeves. The purpose of this study was to investigate fretting corrosion in sleeved ceramic heads in retrieved total hip arthroplasties. METHODS: Thirty-seven sleeved ceramic heads were collected during revision. The femoral heads and sleeves were implanted 0.0-3.3 years. The implants were revised predominantly for instability, infection, and loosening. Fifty percent of the retrievals were implanted during a primary surgery. Fretting corrosion was assessed using the Goldberg-Higgs semiquantitative scoring system. RESULTS: Mild-to-moderate fretting corrosion scores (score = 2-3) were observed in 92% of internal tapers, 19% of external tapers, and 78% of the stems. Severe fretting corrosion was observed in 1 stem trunnion that was previously retained during revision surgery and none of the retrieved sleeves. There was no difference in corrosion damage of sleeves used in primary or revision surgery. CONCLUSION: The fretting corrosion scores in this study were predominantly mild and lower than reported fretting scores of cobalt-chrome heads in metal-on-polyethylene bearings. Although intended for use in revisions, we found that the short-term in vivo corrosion behavior of the sleeves was similar in both primary and revision surgery applications. From an in vivo corrosion perspective, sleeves are a reasonable solution for restoring the stem taper during revision surgery.

Do Stem Taper Microgrooves Influence Taper Corrosion in Total Hip Arthroplasty? A Matched Cohort Retrieval Study.

BACKGROUND: Previous studies identified imprinting of the stem morphology onto the interior head bore, leading researchers to hypothesize an influence of taper topography on mechanically assisted crevice corrosion. The purpose of this study was to analyze whether microgrooved stem tapers result in greater fretting corrosion damage than smooth stem tapers. METHODS: A matched cohort of 120 retrieved head-stem pairs from metal-on-polyethylene bearings was created controlling for implantation time, flexural rigidity, apparent length of engagement, and head size. There were 2 groups of 60 heads each, mated with either smooth or microgrooved stem tapers. A high-precision roundness machine was used to measure and categorize the surface morphology. Fretting corrosion damage at the head-neck junction was characterized using the Higgs-Goldberg scoring method. Fourteen of the most damaged heads were analyzed for the maximum depth of material loss and focused ion beam cross-sectioned to view oxide and base metal. RESULTS: Fretting corrosion damage was not different between the 2 cohorts at the femoral head (P = .14, Mann-Whitney) or stem tapers (P = .35). There was no difference in the maximum depths of material loss between the cohorts (P = .71). Cross-sectioning revealed contact damage, signs of micro-motion, and chromium-rich oxide layers in both cohorts. Microgroove imprinting did not appear to have a different effect on the fretting corrosion behavior. CONCLUSION: The results of this matched cohort retrieval study do not support the hypothesis that taper surfaces with microgrooved stems exhibit increased in vivo fretting corrosion damage or material release.

Knee Joint Loads and Surrounding Muscle Forces during Stair Ascent in Patients with Total Knee Replacement.

Total knee replacement (TKR) is commonly used to correct end-stage knee osteoarthritis. Unfortunately, difficulty with stair climbing often persists and prolongs the challenges of TKR patents. Complete understanding of loading at the knee is of great interest in order to aid patient populations, implant manufacturers, rehabilitation, and future healthcare research. Musculoskeletal modeling and simulation approximates joint loading and corresponding muscle forces during a movement. The purpose of this study was to determine if knee joint loadings following TKR are recovered to the level of healthy individuals, and determine the differences in muscle forces causing those loadings. Data from five healthy and five TKR patients were selected for musculoskeletal simulation. Variables of interest included knee joint reaction forces (JRF) and the corresponding muscle forces. A paired samples t-test was used to detect differences between groups for each variable of interest (p<0.05). No differences were observed for peak joint compressive forces between groups. Some muscle force compensatory strategies appear to be present in both the loading and push-off phases. Evidence from knee extension moment and muscle forces during the loading response phase indicates the presence of deficits in TKR in quadriceps muscle force production during stair ascent. This result combined with greater flexor muscle forces resulted in similar compressive JRF during loading response between groups.

Single Versus Multiple-Radii Cruciate-Retaining Total Knee Arthroplasty: An In Vivo Mobile Fluoroscopy Study.

BACKGROUND: Previous fluoroscopic studies, using static C-arm systems, have shown nonnormal kinematic patterns in cruciate-retaining (CR) total knee arthroplasty (TKA). This study compares in vivo the kinematic differences in subjects implanted with single sagittal radius (SR) vs multiradii (MR) CR TKA for various activities using a novel mobile fluoroscopic system. METHODS: Using mobile fluoroscopy and 3D to 2D registration, tibiofemoral kinematics were analyzed for 25 subjects with an SR, symmetrical condylar CR TKA and 25 subjects with an MR, asymmetric condylar CR TKA for three dynamic weight-bearing activities: (1) deep knee bend (DKB), (2) walking up a ramp, and (3) walking down a ramp. RESULTS: During DKB, from full extension to maximum knee flexion, the SR (-0.43 ± 3.43 mm) and MR (-1.00 ± 3.23 mm) groups experienced statistically similar anterior/posterior (AP) motion in the lateral condyle. The SR (3.51 ± 2.68 mm) group had significant anterior movement compared to the MR (-0.42 ± 2.20 mm) group in the medial condyle. This resulted in a significantly larger amount of normal axial rotation experienced by the SR (5.20 ± 3.93°) group compared to the MR (0.75 ± 5.12°) group. During ramp activities, the SR TKA consistently exhibited a significantly more posterior position of both condyles compared to the MR TKA. CONCLUSION: Although the SR TKA exhibited larger amounts of axial rotation compared to the MR TKA in DKB, neither design exhibited weight-bearing kinematics as previously reported for the normal knee. Additional research on the normal knee for ramp activities is required to understand the importance of condylar position during these activities.

Influence of Total Knee Arthroplasty on Gait Mechanics of the Replaced and Non-Replaced Limb During Stair Negotiation.

This study compared biomechanics during stair ascent in replaced and non-replaced limbs of total knee arthroplasty (TKA) patients with control limbs of healthy participants. Thirteen TKA patients and fifteen controls performed stair ascent. Replaced and non-replaced knees of TKA patients were less flexed at contact compared to controls. The loading response peak knee extension moment was greater in control and non-replaced knees compared with replaced. The push-off peak knee abduction moment was elevated in replaced limbs compared to controls. Loading and push-off peak hip abduction moments were greater in replaced limbs compared to controls. The push-off peak hip abduction moment was greater in non-replaced limbs compared to controls. Future rehabilitation protocols should consider the replaced knee and also the non-replaced knee and surrounding joints.

Is there material loss at the backside taper in modular CoCr acetabular liners?

BACKGROUND: Metal wear and corrosion products generated by hip replacements have been linked to adverse local tissue reactions. Recent investigations of the stem/head taper junction have identified this modular interface as another possible source of metal debris; however, little is known regarding other modular metallic interfaces, their ability to produce metal debris, and possibly to provide insight in the mechanisms that produce metal debris. QUESTIONS/PURPOSES: We asked three questions: (1) can we develop a reliable method to estimate volumetric material loss from the backside taper of modular metal-on-metal liners, (2) do backside tapers of modular metal-on-metal liners show a quantifiable volumetric material loss, and, if so, (3) how do regions of quantitatively identified material loss correspond to visual and microscopic investigations of surface damage? METHODS: Twenty-one cobalt-chromium (CoCr) liners of one design and manufacturer were collected through an institutional review board-approved retrieval program. All liners were collected during revision surgeries, where the primary revision reason was loosening (n=11). A roundness machine measured 144 axial profiles equally spaced about the circumference of the taper region near the rim to estimate volume and depth of material loss. Sensitivity and repeatability analyses were performed. Additionally, visual and scanning electron microscopy investigations were done for three liners. RESULTS: Our measurement method was found to be reproducible. The sensitivity (how dependent measurement results are on experimental parameters) and repeatability (how consistent results are between measurements) analyses confirmed that component alignment had no apparent effect (weak correlation, R2=0.04) on estimated volumetric material loss calculations. Liners were shown to have a quantifiable material loss (maximum=1.7 mm3). Visual investigations of the liner surface could identify pristine surfaces as as-manufactured regions, but could misidentify discoloration as a possible region of material loss. Scanning electron microscopy more accurately distinguished between as-manufactured and damaged regions of the taper. CONCLUSIONS: The roundness machine has been used to develop a repeatable method for characterizing material loss; future work comparing a gravimetric standard with estimations of material loss determined from the roundness machine may show the accuracy and effectiveness of this method. Liners show rates of material loss that compare with those reported for other taper junctions. Visual inspection alone may misidentify as-manufactured regions as regions of material loss. CLINICAL RELEVANCE: This study identifies the acetabular liner/shell interface in modular metal-on-metal devices as a potential source of metal wear or corrosion products. The relation between metal debris and clinical performance, regardless of the type of bearing couple, is a concern for clinicians. Therefore, it is important to characterize every type of modular junction to understand the quantity, location, and mechanism(s) of material loss.

Mechanically assisted taper corrosion in modular TKA.

The purpose of this study was to characterize the prevalence of taper damage in modular TKA components. One hundred ninety-eight modular components were revised after 3.9±4.2 years of implantation. Modular components were evaluated for fretting corrosion using a semi-quantitative 4-point scoring system. Design features and patient information were assessed as predictors of fretting corrosion damage. Mild-to-severe fretting corrosion (score ≥2) was observed in 94/101 tapers on the modular femoral components and 90/97 tapers on the modular tibial components. Mixed alloy pairs (p=0.03), taper design (p<0.001), and component type (p=0.02) were associated with taper corrosion. The results from this study supported the hypothesis that there is taper corrosion in TKA. However the clinical implications remain unclear.

Histological characterization of periprosthetic tissue responses for metal-on-metal hip replacement.

The histology of periprosthetic tissue from metal-on-metal (MOM) hip devices has been characterized using a variety of methods. The purpose of this study was to compare and evaluate the suitability of two previously developed aseptic lymphocyte-dominated vasculitis-associated lesions (ALVAL) scoring systems for periprosthetic hip tissue responses retrieved from MOM total hip replacement (THR) systems revised for loosening. Two ALVAL scoring systems (Campbell and Oxford) were used to perform histological analyses of soft tissues from 17 failed MOM THRs. The predominant reactions for this patient cohort were macrophage infiltration and necrosis, with less than half of the patients (41%) showing a significant lymphocytic response or a high ALVAL reaction (6%). Other morphological changes varied among patients and included hemosiderin accumulation, cartilage formation, and heterotopic ossification. Both scoring systems are useful for correlating macrophage and lymphocyte responses and for comparison with the other; however, given the diversity and variability of the current responses, the Oxford-ALVAL system is more suitable for scoring tissues from MOM THR patients revised for loosening. It is important that standardized methods of scoring MOM tissue responses be used consistently so multiple study results can be compared and a consensus can be generated.

Stair ambulation biomechanics following total knee arthroplasty: a systematic review.

The purpose of this review was to summarize the biomechanical adaptations during stair ambulation that occur after total knee arthroplasty (TKA). Articles were identified by searching PubMed and Web of Science. During stair ascent, knee flexion angle at heel strike and walking velocity were reduced in TKA subjects compared to controls. Results of other variables were not consistent between studies. During stair descent only one study found any differences for knee moments in the sagittal and frontal plane between TKA subjects and controls. Other results during stair descent were not consistent between studies. Differences in methods can partially explain discrepancies between studies in this review. More studies with consistent and improved methods are needed in order to provide better understanding of stair ambulation following TKA.

A non-invasive acoustic and vibration analysis technique for evaluation of hip joint conditions.

The performance evaluation of THA outcome is difficult and surgeons often use invasive methods to investigate effectiveness. A non-invasive acoustic and vibration analysis technique has recently been developed for more-in-depth evaluation of in vivo hip conditions. Gait kinematics, corresponding vibration and sound measurement of five THA subjects were analyzed post-operatively using video-fluoroscopy, sound and accelerometer measurements while walking on a treadmill. The sound sensor and a pair of tri-axial accelerometers, externally attached to the pelvic and femoral bone prominences, detected frequencies that are propagated through the femoral head and acetabular cup interactions. A data acquisition system was used to amplify the signal and filter out noise generated by undesired frequencies. In vivo kinematics and femoral head sliding quantified using video fluoroscopy were correlated to the sound and acceleration measurements. Distinct variations between the different subjects were identified. A correlation of sound and acceleration impulses with separation has been achieved. Although, in vivo sounds are quite variable in nature and all correlated well with the visual images. This is the first study to document and correlate visual and audible effects of THA under in-vivo conditions. This study has shown that the development of the acoustic and vibration technique provides a practical method and generates new possibilities for a better understanding of THA performance.