Risk of post-operative bleeding after dentoalveolar surgery in patients taking anticoagulants: a cohort study using the common data model.

This retrospective study aimed to determine risk factors associated with post-operative bleeding after dentoalveolar surgery in patients taking anticoagulants. Patients taking anticoagulants who were planned to undergo periodontal flap operation, tooth extraction or implant surgery were included. Patients were divided into two subgroups according to the maintenance of anticoagulants following medical consultation: (1) maintenance group and (2) discontinuation group. The analysed patient-related factors included systemic diseases, maintenance of anticoagulants and types of anticoagulant. Intra- and post-operative treatment-related factors, haemostatic methods and post-operative bleeding were collected for statistical analyses. There were 35 post-operative bleeding complications (6.5%) in the 537 included patients: 21 (8.6%) in maintenance group and 14 (4.8%) in discontinuation group. The type of anticoagulant (p = 0.037), tooth extraction combined with bone grafting (p = 0.016) and type of implant surgery (p = 0.032) were significantly related to the post-operative bleeding rate. In the maintenance group, atrial fibrillation [odds ratio (OR) = 6.051] and vitamin K inhibitors (OR = 3.679) were associated with a significantly higher bleeding risk. From this result, it can be inferred that the decision to continue anticoagulants should be made carefully based on the types of anticoagulant and the characteristics of dentoalveolar surgeries performed: extraction with bone grafting, multiple implantations and involvement of maxillary arch.

Immediate loading on two adjacent single dental implants with definitive nonsplinted restorations: A proof of concept in the posterior zone.

OBJECTIVES: To evaluate clinical, clinician- and patient-reported outcomes (PROs) of two adjacent single posterior implants immediately loaded with definitive single crowns up to 1 year. Ten patients in need of two adjacent posterior single implants were included. All implants were placed applying a fully digital workflow. Definitive screw-retained single zirconia crowns were delivered within 72 h after implant placement. Clinical parameters, patient- and clinician-reported outcomes were assessed up to 1 year of follow-up. CLINICAL CONSIDERATIONS: Clinical outcomes remained stable, with no implant failures or technical and biological complications throughout the observation period. Patient satisfaction was very high at baseline (crown delivery) and remained consistently high at 6 and 12 months of follow-up. Crown insertion 3 days after implant placement was rated as an easy procedure by clinicians. CONCLUSIONS: Two adjacent single implants with immediate definitive restorations (<72 h) in the posterior region appear to be a viable and easy treatment option to shorten the overall treatment time and potentially enhancing patient satisfaction. However, randomized controlled trials are needed to confirm the advantages of this treatment protocol over a delayed loading approach. CLINICAL SIGNIFICANCE: In selected cases, immediate implant loading with definitive restorations in the posterior region appears a valuable and straightforward option to shorten the overall treatment time.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study.

AIM: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels. MATERIALS AND METHODS: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement. RESULTS: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively). CONCLUSIONS: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Comprehensive treatment protocol for peri-implantitis: an up-to date narrative review of the literature.

This narrative review describes up-to-date treatment options for peri-implantitis and proposes a treatment protocol and flowchart based on the current scientific evidence. Peri-implantitis treatment should be based on the phased treatment protocol for periodontitis, which is a continuous flow of decisions for extraction, nonsurgical and surgical treatments with step-by-step re-evaluation. The protocol's goals are to fulfill the success criteria for peri-implantitis treatment (probing depth of ≤5 mm, and absence of bleeding on probing, suppuration, and progressive bone loss) and to halt disease progression. Fixtures with peri-implantitis can initially be classified as failed or failing. A failed implant needs to be removed. In contrast, nonsurgical and surgical treatments can be applied to a failing implant. Nonsurgical treatment should be the initial treatment for failing implants; however, sole nonsurgical treatment was regarded as inefficient for peri-implantitis. Recent studies have found that the adjunctive use of antibiotics to nonsurgical debridement increased the success of nonsurgical treatment for peri-implantitis. Surgical treatments can be classified into resective, access, and reconstructive surgeries. The technique should be selected according to the patient's bone defect configuration, which relate to regenerative potential. Various combinations of decontamination methods (e.g., mechanical, chemical, and pharmacological approaches) are required to achieve absolute surface decontamination. Clinicians should select an appropriate surface decontamination strategy according to the purpose of surgery. After signs of disease disappear and its progression is halted through active peri-implantitis treatment, it is necessary to enroll patients into maintenance programs. Compliance of patients with the maintenance program reduces the recurrence of peri-implantitis and sustains clinical success after treatment. Maintenance visits should include professional plaque control and hygiene care reinforcement for patients, and their interval should be set according to individual peri-implantitis risk. Clinicians should remind that peri-implantitis treatment is not a single procedure, but rather a continuing cycle of treatment and re-evaluation.

Is transmucosal healing of an implant as effective as submerged healing when simultaneous guided bone regeneration is performed? A preclinical study.

AIM: To investigate whether transmucosal healing is as effective as submerged healing in terms of buccal bone regeneration when guided bone regeneration (GBR) is performed simultaneously with implant placement. MATERIALS AND METHODS: In six dogs, buccal dehiscence defects were created in the edentulous mandibular ridge, sized 5 × 5 × 3 mm (length × height × depth). In each defect, a bone-level implant was placed, and four experimental groups were randomly assigned as follows: (i) transmucosal healing with GBR (T-GBR), (ii) transmucosal healing without GBR (T-control), (iii) submerged healing with GBR (S-GBR) and (iv) submerged healing without GBR (S-control). Data analyses were based on histological slides 5 months after implant placement. RESULTS: The T-GBR group showed significant differences compared to the control groups regarding defect height resolution, buccal bone thickness and mineralized tissue area (p < .05), but showed no significant differences when compared with the S-GBR group (p > .05). CONCLUSIONS: The mode of healing (transmucosal vs. submerged) does not influence bone regeneration at implant sites. The clinician may therefore choose the approach based on further clinical and patient-specific parameters.

Ridge preservation using a self-retaining block type bone substitute for extraction sockets with buccal dehiscence defects - A preclinical study.

OBJECTIVE: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model. MATERIALS AND METHODS: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed. RESULTS: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm2 in the control, PBS, csBB, and RsrBB groups, respectively.). CONCLUSIONS: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation.

Occlusive membranes for guided regeneration of inflamed tissue defects.

Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone.

Comparing the clinical effects of local administration of minocycline ointment and doxycycline solution in the treatment of acute periodontal abscesses: a retrospective clinical study.

PURPOSE: The objective of this retrospective clinical study was to provide evidence supporting the adjunctive local application of doxycycline solution or minocycline ointment, in conjunction with drainage, for the treatment of acute periodontal abscesses. METHODS: The study included 63 patients who had received treatment for acute periodontal abscesses through drainage supplemented with 1 of 3 types of adjunctive medications during their initial visit (visit 1; baseline): 1) saline irrigation (the control group), 2) 2% minocycline ointment (the TM group), or 3) 300 mg/mL doxycycline irrigation (the TD group). The same adjunctive medication was administered at visit 2, which took place 1 week after visit 1. Probing depth (PD), bleeding on probing (BOP), plaque index, gingival recession, clinical attachment level, and tooth mobility were clinically evaluated at visits 1, 2, and a third visit (visit 3; 4 weeks after visit 1). Statistical significance was considered to be indicated by P values <0.05. RESULTS: By visit 3, all clinical indices and tooth mobility had significantly decreased in each group. At this visit, PD and BOP on the abscess side were significantly lower in the TM and TD groups compared to the control group. The TD group showed a significantly greater improvement than the TM group, with mean PD reductions of 1.09 mm in the control group, 1.88 mm in the TM group, and 2.88 mm in the TD group. Similarly, mean BOP reductions were 45% in the control group, 73.02% in the TM group, and 95.45% in the TD group. CONCLUSIONS: Local and adjunctive administration of doxycycline and minocycline in combination with drainage exhibited clinical advantages over drainage alone in improving PD and BOP. Notably, a doxycycline solution of 300 mg/mL was more effective than a 2% minocycline ointment.

Effect of strontium substitution on functional activity of phosphate-based glass.

Phosphate-based glass (PBG) is a bioactive agent, composed of a glass network with phosphate as the primary component and can be substituted with various therapeutic ions for functional enhancement. Strontium (Sr) has been shown to stimulate osteogenic activity and inhibit pro-inflammatory responses. Despite this potential, there are limited studies that focus on the proportion of Sr substituted and its impact on the functional activity of resulting Sr-substituted PBG (PSr). In this study, focusing on the cellular biological response we synthesized and investigated the functional activity of PSr by characterizing its properties and comparing the effect of Sr substitution on cellular bioactivity. Moreover, we benchmarked the optimal composition against 45S5 bioactive glass (BG). Our results showed that PSr groups exhibited a glass structure and phosphate network like that of PBG. The release of Sr and P was most stable for PSr6, which showed favorable cell viability. Furthermore, PSr6 elicited excellent early osteogenic marker expression and inhibition of pro-inflammatory cytokine expression, which was significant compared to BG. In addition, compared to BG, PSr6 had markedly higher expression of osteopontin in immunocytochemistry, higher ALP expression in osteogenic media, and denser alizarin red staining in vitro. We also observed a comparable in vivo regenerative response in a 4-week rabbit calvaria defect model. Therefore, based on the results of this study, PSr6 could be identified as the functionally optimized composition with the potential to be applied as a valuable bioactive component of existing biomaterials used for bone regeneration.

Synchrotron Analysis of Damaged Extraction Sockets Augmented Using a Synthetic Bone Block: A Pilot Study.

AIM: To investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. MATERIALS AND METHODS: Four participants were included in whom socket augmentation was performed using SBB and a collagen membrane. Intraoral scan (IOS) was performed before extraction (baseline), immediately postoperative (IP), and at 6 months (6M). Cone-beam computed tomography (CBCT) was performed at IP and 6M. At 6M, a trephine biopsy was obtained during implant placement and the sample was observed using synchrotron. Profilometric change of soft tissue was measured from the IOS data, hard tissue dimensional change was measured from the CBCT data and the bone quality from synchrotron data. RESULTS: There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11±1.08 and 0.02±0.8, and -0.65±0.82 mm3). Horizontal bone width measured at 1 mm increments from the augmented bone crest to 5 mm apically revealed only slight reduction (less than 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21±0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage new bone = 16.49±4.91). CONCLUSIONS: Augmentation of the damaged extraction socket using SBB is a viable technique, in which the dimensions of the augmented ridge can be maintained up to 6M. Further long term randomized clinical trial is needed.

Vertical and horizontal ridge augmentation using customized three-dimensionally printed polycaprolactone mesh in atrophic posterior maxillae: a case report.

Polycaprolactone has exhibited expediency as a biomaterial for bone regenerative procedures preclinically. The present report of the two clinical cases in the posterior maxilla is the first to describe clinical application of a customized 3D printed polycaprolactone mesh for alveolar ridge augmentation. Two patients needing extensive ridge augmentation procedures for dental implant therapy were selected. Polycaprolactone meshes were virtually designed, 3D printed and applied in combination with a xenogeneic bone substitute. Cone-beam computed tomography was taken pre-operatively, immediately after the surgery, and 1.5 to 2 years after the delivery of implant prostheses. The serial cone-beam computed tomography images were superimposed to measure the augmented height and width at 1 mm increments from the implant platform to 3 mm apically. After 2 years, the mean [maximum, minimum] bone gain was 6.05 [8.64, 2.85] mm vertically and 7.77 [10.03, 6.18] mm horizontally at 1 mm below the implant platform. From immediately postoperative to 2 years, there was 14 % reduction of augmented ridged height and 24 % reduction of augmented width at 1 mm below the platform. All implants placed in augmented sites were successfully maintained until 2 years. The customized Polycaprolactone mesh might be a viable material for ridge augmentation in the atrophic posterior maxilla. This needs to be confirmed through randomized controlled clinical trials in future studies.

Multistability and hysteresis in states of oral microbiota: Is it impacting the dental clinical cohort studies?

INTRODUCTION: Microbiome from a "healthy cohort" is used as a reference for comparison to cases and intervention. However, the studies with cohort-based clinical research have not sufficiently accounted for the multistability in oral microbial community. The screening is limited to phenotypic features with marked variations in microbial genomic markers. Herein, we aimed to assess the stability of the oral microbiome across time from an intervention-free "healthy" cohort. METHODS: We obtained 33 supragingival samples of 11 healthy participants from the biobank. For each participant, we processed one sample as baseline (T0) and two samples spaced at 1-month (T1) and 3-month (T2) intervals for 16S ribosomal RNA gene sequencing analysis. RESULTS: We observed that taxonomic profiling had a similar pattern of dominant genera, namely, Rothia, Prevotella, and Hemophilus, at all time points. Shannon diversity revealed a significant increase from T0 (p < .05). Bray Curtis dissimilarity was significant (R = -.02, p < .01) within the cohort at each time point. Community stability had negative correlation to synchrony (r = -.739; p = .009) and variance (r = -.605; p = .048) of the species. Clustering revealed marked differences in the grouping patterns between the three time points. For all time points, the clusters presented a substantially dissimilar set of differentially abundant taxonomic and functional biomarkers. CONCLUSION: Our observations indicate towards the presence of multistable states within the oral microbiome in an intervention-free healthy cohort. For a conclusive and meaningful long-term reference, dental clinical research should account for multistability in the personalized therapy approach to improve the identification and classification of reliable markers.

Platelet-rich fibrin combined with a particulate bone substitute versus guided bone regeneration in the damaged extraction socket: An in vivo study.

AIM: It has been proposed that platelet-rich fibrin (PRF) can be used to support bone regeneration during alveolar ridge augmentation. The aim of this study was to determine whether an approach utilizing PRF provides similar performance to the established guided bone regeneration (GBR) procedure. MATERIALS AND METHODS: Two-wall defects were surgically created in beagle dogs and treated in three experimental groups: (i) a sticky bone (SB) substitute prepared using liquid PRF and deproteinized porcine bone mineral (DPBM); (ii) SB covered with solid PRF compressed into a membrane; and (iii) GBR performed using DPBM covered by a collagen membrane. Quantitative reverse-transcription polymerase chain reaction was applied to the specimen after 1 week of healing, and microcomputed tomography (micro-CT) and histological outcomes were analysed after 8 weeks of healing. RESULTS: Compared with GBR, PRF resulted in a moderate increase in the expression levels of osteoblast and osteoclast markers, osteocalcin, and calcitonin receptor. Moreover, PRF modestly increased angiogenesis and the inflammation markers vascular endothelial growth factor (VEGF) and IL-6. Micro-CT and histological analyses confirmed the expected increased alveolar ridge area, with no significant differences between the three groups. Consistently, graft consolidation, as indicated by new bone formation at the defect site, did not differ significantly between groups. CONCLUSIONS: The present results demonstrate that PRF-based approaches perform comparably to the established GBR procedure in terms of the consolidation of DPBM in two-wall alveolar defects.

Soft-tissue dimensional change following guided bone regeneration on peri-implant defects using soft-type block or particulate bone substitutes: 1-year outcomes of a randomized controlled clinical trial.

AIM: To compare the peri-implant soft-tissue dimensional changes following guided bone regeneration between particulate (particle group) and collagenated soft-block-type (block group) biphasic calcium phosphate (BCP). MATERIALS AND METHODS: This study investigated 35 subjects: 18 in the particle group and 17 in the block group. Cone-beam computed tomography obtained at 6 months post surgery and optical impressions taken periodically (before surgery, 6 months post surgery, and 1 year post surgery) were superimposed. The ridge contour changes over time and the peri-implant mucosal thicknesses were measured diagonally and horizontally, and analysed statistically. RESULTS: The increases in diagonal (1.12 ± 0.78 mm) and horizontal (2.79 ± 1.90 mm) ridge contour of the block group were significantly higher than those in the particle group during the first 6 months (p < .05); however, the contour hardly changed thereafter (diagonal: 0.07 ± 0.75 mm; horizontal: -0.34 ± 1.26 mm), resulting in the 1-year contour changes similar between the two groups. Regardless of the type of BCP, the ridge contour increased significantly over 1 year when the dehiscence defect had a contained configuration (p < .05). CONCLUSIONS: The increase in soft-tissue dimensions for 1 year was similar between the two groups. The mucosal contour increase was larger when the surgery was conducted in a more contained defect, and this was not influenced by the type of BCP.

Tissue integration patterns of non-crosslinked and crosslinked collagen membranes: an experimental in vivo study.

PURPOSE: Non-crosslinked and crosslinked collagen membranes are known to exhibit distinct degradation characteristics, resulting in contrasting orientations of the adjacent tissues and different biological processes. The aim of this study was to conduct a histomorphometric assessment of non-crosslinked and crosslinked collagen membranes regarding neovascularization, tissue integration, tissue encapsulation, and biodegradation. METHODS: Guided bone regeneration was performed using either a non-crosslinked (BG) or a crosslinked collagen membrane (CM) in 15 beagle dogs, which were euthanized at 4, 8, and 16 weeks (n=5 each) for histomorphometric analysis. The samples were assessed regarding neovascularization, tissue integration, encapsulation, the remaining membrane area, and pseudoperiosteum formation. The BG and CM groups were compared at different time periods using nonparametric statistical methods. RESULTS: The remaining membrane area of CM was significantly greater than that of BG at 16 weeks; however, there were no significant differences at 4 and 8 weeks. Conversely, the neovascularization score for CM was significantly less than that for BG at 16 weeks. BG exhibited significantly greater tissue integration and encapsulation scores than CM at all time periods, apart from encapsulation at 16 weeks. Pseudoperiosteum formation was observed in the BG group at 16 weeks. CONCLUSIONS: Although BG membranes were more rapidly biodegraded than CM membranes, they were gradually replaced by connective tissue with complete integration and maturation of the surrounding tissues to form dense periosteum-like connective tissue. Further studies need to be performed to validate the barrier effect of the pseudoperiosteum.

Strategies for implant surface decontamination in peri-implantitis therapy.

Peri-implantitis is an infectious disease that leads to progressive bone loss. Surgical therapy has been advocated as a way of halting its progression and re-establishing peri-implant health. One of the most challenging but crucial tasks in the management of peri-implantitis is biofilm removal to achieve reosseointegration and promote the reduction of peri-implant pockets. A wide variety of strategies have been used for implant surface decontamination. Mechanical means have been demonstrated to be effective in eliminating calculus deposits and residual debris; however, the presence of undercuts and the grooves and porosities along the roughened implant surface make it difficult to achieve an aseptic surface. In conjunction with mechanical measures, use of chemical adjuncts has been advocated to dilute bacterial concentrations, destroy the bacteria's organic components and eliminate endotoxins. Pharmacological adjuncts have also been recommended to diminish the bacterial load. Other strategies, such as use of lasers, implantoplasty and electrolysis, have been suggested for implant surface decontamination to promote predictable clinical and radiographic outcomes.

Regulation of the Inevitable Water-Responsivity of Silk Fibroin Biopolymer by Polar Amino Acid Activation.

In nature, water is vital for maintaining homeostasis. Particularly, organisms (e.g., plant leaf, bird feather) exploit water fluidics for motions. Hydration-adaptive crystallization is the representative water-responsive actuation of biopolymers. This crystallization has inspired the development of intelligent human-robot interfaces. At the same time, it hinders the consistent adhesion of tissue adhesive. As hydration-adaptive crystallization is inevitable, the on-demand control of crystallization is desirable in the innovative biopolymeric biomedical systems. To this end, this study developed an amino acid-based technology to artificially up- or down-regulate the inevitable crystallization of silk fibroin. A case II diffusion model was constructed, and it revealed that the activity of polar amino acid is related to crystallization kinetics. Furthermore, the water dynamics study suggested that active amino acid stabilizes crystallization-triggering water molecules. As a proof-of-concept, we verified that a 30% increase in the activity of serine resulted in a 50% decrease in the crystallization rate. Furthermore, the active amino acid-based suppression of hydration-adaptive crystallization enabled the silk fibroin to keep its robust adhesion (approximately 160 kJ m-3) by reducing the water-induced loss of adhesive force. The proposed silk fibroin was demonstrated as a stable tissue adhesive applied on ex vivo porcine mandible tissue. This amino acid-based regulation of hydration-adaptive crystallization will pioneer next-generation biopolymer-based healthcare.

In Vitro and In Vivo Anti-Inflammatory Effects of TEES-10®, a Mixture of Ethanol Extracts of Ligularia stenocephala Matsum. & Koidz. and Secale cereale L. Sprout, on Gingivitis and Periodontitis.

Gingivitis and periodontitis are inflammatory disorders caused by dental plaque and calculus. These disorders often lead to tooth loss if not treated properly. Although antibiotics can be used, it is hard to treat them due to the difficulty in supplying effective doses of antibiotics to lesion areas and side effects associated with long-term use of antibiotics. In the present study, attempts were made to provide in vitro and in vivo evidence to support anti-inflammatory activities of TEES-10®, a mixture of ethanol extracts of Ligularia stenocephala (LSE) and Secale cereale L. sprout (SCSE) toward gingivitis and periodontitis by performing the following experiments. TEES-10® with a ratio of 6:4 (LSE:SCSE) showed the best effects in both stimulating the viability and inhibiting the cytotoxicity. In in vitro experiments, TEES-10® showed an ability to scavenge 2,2-diphenyl-1-picrylhydrazyl and superoxide radicals and remove ROS generated in periodontal ligament cells treated with lipopolysaccharide. TEES-10® also enhanced the viability of stem cells from human exfoliated deciduous teeth and stimulated the osteogenic differentiation of deciduous teeth cells. In in vivo experiments using rats with induced periodontitis, TEES-10® significantly decreased inflammatory cell infiltration and the numbers of osteoclasts, increased alveolar process volume and the numbers of osteoblasts, decreased serum levels of IL-1ß and TNF-α (pro-inflammatory cytokines), and increased serum levels of IL-10 and IL-13 (anti-inflammatory cytokines). These results strongly support the theory that TEES-10® has the potential to be developed as a health functional food that can treat and prevent gingival and periodontal diseases and improve dental health.

The Impact of Masticatory Function on Cognitive Impairment in Older Patients: A Population-Based Matched Case-Control Study.

PURPOSE: The aim of this study was to investigate the association between the changes in masticatory function and cognitive impairment by analyzing longitudinal data of older Korean patients. MATERIALS AND METHODS: Patients aged over 60 years with dental records between 2005 to 2010 (baseline; T1) and 2014 to 2020 (follow-up; T2) were selected in a single medical center. Based on the dementia diagnosis after T2, the cohort was classified into two groups, the dementia group (n=122) and the control group (n=366). Changes in masticatory function were calculated using the total functional tooth unit (T-FTU) in both groups. The incidence of tooth extraction (%) and the subsequent rehabilitation during the observation period were also evaluated. RESULTS: In the dementia group, T-FTU significantly decreased from T1 to T2 (9.81±2.78 to 9.11±3.16, respectively, p=0.008), while no significant change was observed in the control group. During the mean observation period of 9 years, significantly more teeth were extracted and neglected to be prosthetically restored in the dementia group than in the control group. Regression analysis revealed that the number of missing teeth neglected [odds ratio (OR)=1.195, 95% confidence interval (CI)=1.025-1.393, p=0.023] and previous alcohol consumption (OR=4.445, 95% CI=1.831-1.795, p=0.001) were the most significant risk factors of dementia. CONCLUSION: There might be a causative relationship between the neglected missing dentition and the onset of dementia.

Three-dimensionally printed biphasic calcium phosphate blocks with different pore diameters for regeneration in rabbit calvarial defects.

BACKGROUND: Biphasic calcium phosphate (BCP) is the most frequently used synthetic bone substitutes, which comprises a combination of hydroxyapatite (HA) and beta-tricalcium phosphate (b-TCP). Thanks to the recent advances in digital dentistry and three-dimensional (3D) printing technology, synthetic block bone substitutes can be customized to fit individual defect morphologies. The diameter of the pores can influence the rate of bone formation and material resorption. The aim of this study was to compare three-dimensionally printed biphasic calcium phosphate (BCP) block bone substitutes with different pore diameters (0.8-, 1.0-, and 1.2- mm) for use in the regeneration of rabbit calvarial defects. METHODS: Four circular defects were formed on the calvaria of ten rabbits. Each defect was randomly allocated to one of the following study groups: (i) control group, (ii) 0.8-mm group, (iii) 1.0-mm group, and (iv) 1.2-mm group. All specimens were postoperatively harvested at 2 and 8 weeks, and radiographic and histomorphometric analyses were performed on the samples. RESULTS: Histologically, the BCP blocks remained unresorbed up to 8 weeks, and new bone formation occurred within the porous structures of the blocks. After the short healing period of 2 weeks, histomorphometric analysis indicated that new bone formation was significantly greater in the BCP groups compared with the control (p < 0.05). However, there were no significant differences between the groups with different pore diameters (p > 0.05). At 8 weeks, only the 1.0-mm group (3.42 ± 0.48 mm2, mean ± standard deviation) presented a significantly larger area of new bone compared with the control (2.26 ± 0.59 mm2) (p < 0.05). Among the BCP groups, the 1.0- and 1.2-mm groups exhibited significantly larger areas of new bone compared with the 0.8-mm group (3.42 ± 0.48 and 3.04 ± 0.66 vs 1.60 ± 0.70 mm2, respectively). CONCLUSIONS: Within the limitations of this study, the BCP block bone substitutes can be applied to bone defects for successful bone regeneration. Future studies should investigate more-challenging defect configurations prior to considering clinical applications.