Comprehensive Guidance for the Prevention of Periprosthetic Joint Infection After Total Joint Arthroplasty and Pitfalls in the Prevention.

Total joint arthroplasty (TJA) is a surgical procedure, in which parts of damaged joints are removed and replaced with a prosthesis. The main indication of TJA is osteoarthritis, and the volume of TJA is rising annually along with the increase of aged population. Hip and knee are the most common joints, in which TJAs are performed. The TJA prosthesis is composed of metal, plastic, or ceramic device. Even though TJA is the most successful treatment for end-stage osteoarthritis, it is associated with various complications, and periprosthetic joint infection (PJI) is the most serious complication after TJA. With the increasing volume of TJAs, there is a simultaneous rise in the incidence of PJI. Contamination of the surgical wound and the adherence of bacteria to the surface of prosthetic component represent the initial step in the pathogenesis of PJI. The main sources of the contamination are 1) patient's own flora, 2) droplets in the operation room air, and 3) surgical gloves and instruments. Even though modern techniques have markedly reduced the degree of contamination, TJAs cannot be done in completely germ-free conditions and some degree of contamination is inevitable in all surgical procedures. However, not all contamination leads to PJI. It develops when the burden of contamination exceeds the immune threshold or the colony forming units (CFUs) and various factors contribute to a decrease in the CFU level. Surgeons should be aware of the germ burden/CFU concept and should monitor sources of contamination to maintain the germ burden below the CFU to prevent PJI.

Digital Templating of Hip Arthroplasty Using Microsoft PowerPoint: A Pilot Study with Technical Details.

Templating is essential in hip arthroplasty preparation, facilitating implant size prediction and surgical rehearsal. It ensures the selection of suitable implants according to patient anatomy and disease, aiming to minimize post-operative complications. Various templating methods exist, including traditional acetate templating on both analog and digital images, alongside digital templating on digital images, which is categorized into 2D and 3D approaches. Despite the popularity of acetate templating on digital images, challenges such as the requirement for physical templates and result preservation persist. To address these limitations, digital templating with software like OrthoSize and Orthoview has been suggested, although not universally accessible. This technical note advocates for Microsoft PowerPoint as an effective alternative for 2D digital templating, highlighting its user-friendly features for image manipulation without needing specialized software. The described method involves scanning acetate templates, adjusting the images in PowerPoint 365 for size, position, and calibration on patient radiographs, and demonstrating reliability through preliminary assessments, with intraclass correlation coefficient (ICC) values indicating a high level of agreement for cup and stem size (ICC = 0.860, 0.841, respectively) but moderate for neck length (ICC = 0.592). We have introduced a method for performing 2D digital templating in the clinical field without the need for specialized software dedicated to digital templating. We believe this method significantly improves the accessibility to 2D digital templating, which was previously limited by the need for digital templating software. Additionally, it enables surgeons to easily establish arthroplasty plans and share them, overcoming the limitations of acetate templates.

Comparative Interrupted Time Series Analysis of Direct Medical Expense and Length of Stay in Elderly Patients with Femoral Neck Fractures Who Underwent Total Hip Arthroplasty and Hemiarthroplasty: A Real World Nationwide Database Study.

Background: The objective of our study was to analyze the postoperative direct medical expenses and hospital lengths of stay (LOS) of elderly patients who had undergone either hemiarthroplasty (HA) or total hip arthroplasty (THA) for femoral neck fractures and to determine the indication of THA by comparing those variables between the 2 groups by time. Methods: In this comparative large-sample cohort study, we analyzed data from the 2011 to 2018 Korean National Health Insurance Review and Assessment Service database. The included patients were defined as elderly individuals aged 60 years or older who underwent HA or THA for a femoral neck fracture. A 1:1 risk-set matching was performed on the propensity score, using a nearest-neighbor matching algorithm with a maximum caliper of 0.01 of the hazard components. In comparative interrupted time series analysis, time series were constructed using the time unit of one-quarter before and after 3 years from time zero. For the segmented regression analysis, we utilized a generalized linear model with a gamma distribution and logarithmic link function. Results: A total of 4,246 patients who received THA were matched and included with 4,246 control patients who underwent HA. Although there was no statistically significant difference in direct medical expense and hospital LOS for the first 6 months after surgery, direct medical expenses and hospital LOS in THA were relatively reduced compared to the HA up to 24 months after surgery (p < 0.05). In the subgroup analysis, the THA group's hospital LOS decreased significantly compared to that of the HA group during the 7 to 36 months postoperative period in the 65 ≤ age < 80 age group (p < 0.05). Direct medical expenses of the THA group significantly decreased compared to those of the HA group during the period from 7 to 24 months after surgery in the men group (p < 0.05). Conclusions: When performing THA in elderly patients with femoral neck fractures, the possibility of survival for at least 2 years should be considered from the perspective of medical expense and medical utilization. Additionally, in healthy and active male femoral neck fracture patients under the age of 80 years, THA may be more recommended than HA.

Precise individual muscle segmentation in whole thigh CT scans for sarcopenia assessment using U-net transformer.

The study aims to develop a deep learning based automatic segmentation approach using the UNETR(U-net Transformer) architecture to quantify the volume of individual thigh muscles(27 muscles in 5 groups) for Sarcopenia assessment. By automating the segmentation process, this approach improves the efficiency and accuracy of muscle volume calculation, facilitating a comprehensive understanding of muscle composition and its relationship to Sarcopenia. The study utilized a dataset of 72 whole thigh CT scans from hip fracture patients, annotated by two radiologists. The UNETR model was trained to perform precise voxel-level segmentation and various metrics such as dice score, average symmetric surface distance, volume correlation, relative absolute volume difference and Hausdorff distance were employed to evaluate the model's performance. Additionally, the correlation between Sarcopenia and individual thigh muscle volumes was examined. The proposed model demonstrated superior segmentation performance compared to the baseline model, achieving higher dice scores (DC = 0.84) and lower average symmetric surface distances (ASSD = 1.4191 ± 0.91). The volume correlation between Sarcopenia and individual thigh muscles in the male group. Furthermore, the correlation analysis of grouped thigh muscles also showed negative associations with Sarcopenia in the male participants. This thesis presents a deep learning based automatic segmentation approach for quantifying individual thigh muscle volume in sarcopenia assessment. The results highlights the associations between Sarcopenia and specific individual muscles as well as grouped thigh muscle regions, particularly in males. The proposed method improves the efficiency and accuracy of muscle volume calculation, contributing to a comprehensive evaluation of Sarcopenia. This research enhances our understanding of muscle composition and performance, providing valuable insights for effective interventions in Sarcopenia management.

Pathophysiology and Treatment of Gout Arthritis; including Gout Arthritis of Hip Joint: A Literature Review.

Gout is triggered by the accumulation of uric acid in the body, leading to hyperuricemia. Genetic, metabolic, and environmental factors can influence this condition. Excessive uric acid buildup results in the formation of monosodium urate (MSU) crystals, which precipitate in specific areas of the body, including the joints, where they can cause symptoms of gout. While the acute and chronic symptoms of gout have been well-documented, diagnosis of gout affecting the hip joint poses significant challenges. The global incidence of gout, the most prevalent form of inflammatory arthritis, is on the rise. Evaluation of the clinical signs, laboratory results, and imaging results is generally required for diagnosis of gout in cases where MSU crystals have not been detected. Hyperuricemia is considered a primary cause of arthritis symptoms, and comprehensive guidelines for treatment are available. Therefore, the choice of medication is straightforward, and moderate effectiveness of treatment has been demonstrated. Gout is a chronic disease, requiring lifelong uric acid-lowering medications, thus application of a treatment strategy based on the target blood uric acid concentration is necessary. Consequently, cases of gout will likely be observed more frequently by hip surgeons in clinical scenarios in the future. The objective of this review is to provide an overview of the pathophysiology of gout and subsequently examine recent advances in diagnostic methods and therapeutic agents based on an understanding of its underlying mechanisms. In addition, literature on gout-related issues affecting the hip joint, providing a useful reference for hip surgeons is examined.

Analysis of Long-Term Medical Expenses in Vertebral Fracture Patients.

Background: The objective of this study was to analyze the direct medical expenses of a vertebral fracture cohort (VC) and a matched cohort (MC) over 5 years preceding and following the fracture, analyze the duration of the rise in medical expenses due to the fracture, and examine whether the expenses vary with age group, utilizing a national claims database. Methods: Subjects with vertebral fractures and matched subjects were chosen from the National Health Insurance Service Sample cohort (NHIS-Sample) of South Korea. Patients with vertebral fractures were either primarily admitted to acute care hospitals (index admissions) or those who received kyphoplasty or vertebroplasty during the follow-up period (2002-2015). A risk-set matching was performed using 1 : 5 random sampling to simulate a real-world situation. Individual-level direct medical expenses per quarter were calculated for 5 years prior and subsequent to the vertebral fracture. In this analysis using a comparative interrupted time series design, we examined the direct medical expenses of a VC and an MC. Results: A total of 3,923 incident vertebral fracture patients and 19,615 matched subjects were included in this study. The mean age was 75.5 ± 7.4 years, and 69.5% were women. The mean difference in medical expenses between the two groups increased steadily before the fracture. The medical expenses of the VC peaked in the first quarter following the fracture. The cost changes were 1.82 times higher for the VC than for the MC (95% confidence interval, 1.62-2.04; p < 0.001) in the first year. Subsequently, there were no differential changes in medical expenses between the two groups (p > 0.05). In the < 70-year subgroup, there were no differential changes in medical expenses between the two groups (p > 0.05). However, in the ≥ 80-year subgroup, the cost changes for the VC were higher than those for the MC up to 5 years after time zero. Conclusions: Based on our study results, we suggest that health and medical policies for vertebral fractures should be designed to last up to approximately 1 year after the fracture. Health policies should be differentiated according to age group.

Hip Fractures in Centenarians: Functional Outcomes, Mortality, and Risk Factors from a Multicenter Cohort Study.

Background: Increasing longevity has caused the very old population to become the fastest-growing segment. The number of centenarians (over 100 years old) is increasing rapidly. Fractures in the elderly lead to excessive medical costs and decreased quality of life with socioeconomic burdens. However, little research has thoroughly examined the functional outcomes and mortality of hip fractures in centenarians. Methods: This is a retrospective observational study. Sixty-eight centenarian hip fracture patients were admitted to the 10 institutions from February 2004 to December 2019. Fifty-six patients with 1-year follow-up were finally included. The following data were obtained: sex, age, body mass index, Charlson comorbidity index value on the operation day, Koval's classification for ambulatory ability, type of fracture, the time interval from trauma to surgery, American Society of Anesthesiologists grade, surgery-related complications, and duration of hospital stay. Postoperative Koval's classification (at 1 year after surgery) and information about death were also collected. Multivariate analysis was performed to analyze the risk factors affecting mortality 1 year after surgery. Results: Mortality rates were 26.8% at 6 months and 39.3% at 1 year. The 90-day mortality was 19.6%, and one of them (2.1%) died in the hospital. The 1-year mortality rates for the community ambulatory and non-community ambulatory groups were 29% and 52%, respectively. Only 9 (16.1%) were able to walk outdoors 1 year after surgery. The remaining 47 patients (83.9%) had to stay indoors after surgery. Multivariate analysis demonstrated that the pre-injury ambulatory level (adjusted hazard ratio, 2.884; p = 0.034) was associated with the risk of mortality. Conclusions: We report a 1-year mortality rate of 39.3% in centenarian patients with hip fractures. The risk factor for mortality was the pre-injury ambulatory status. This could be an important consideration in the planning of treatment for centenarian hip fracture patients.

Analysis of Changes in Sleep Quality and Patterns after Hip Fracture Using Real Evidence of Artificial Intelligence Linked (REAL) Hip Cohort Data.

Background and Objectives: Hip fractures are commonly found in elderly patients, and often result in chronic pain and decreased physical function, as well as worsening of overall health. It is known that early surgical intervention during the acute phase and rehabilitation are important for improving clinical outcomes for these patients. However, the importance of management for improving the quality of life of these patients is becoming more emphasized. Studies on changes in sleep patterns after hip fractures are rare overseas. Therefore, the aim of this study is to investigate the prevalence of sleep disturbance in patients with hip fractures and to analyze the changes in sleep disturbance after surgery by comparing the preoperative and postoperative results. Materials and Methods: During the period from August 2022 to January 2023, patients who underwent surgical treatment for hip fractures and were recruited into the REAL Hip Cohort were selected as research subjects. The sleep survey was conducted using the Pittsburgh Sleep Quality Index (PSQI). The PSQI is composed of 18 questions, each divided into areas of sleep quality, sleep latency, duration, efficiency, disturbance, use of medication, and daytime dysfunction. Each area is scored 0-3 points and the total is 0-21. A score greater than five indicates sleep disorder. The PSQI was surveyed during hospitalization and three months after surgery for post-fracture sleep status. To analyze changes before and after the fracture, paired T-tests and chi-square tests were performed. Results: From August 2022 to January 2023, a total of 40 patients who were recruited into the REAL Hip Cohort responded to the PSQI survey. The average age was 77.4 years and 36 were female. Sleep quality worsened from 0.75 ± 1.0 before surgery to 1.4 ± 1.0 three months after surgery (p = 0.019), and sleep efficiency also worsened from 0.4 ± 0.6 to 1.4 ± 1.0 (p < 0.001). The PSQI increased from an average of 5.2 ± 2.8 before surgery to 8.2 ± 4.2 three months after surgery (p = 0.007), and the number of patients who could be diagnosed with sleep disorders also increased from 12 (40%) to 24 (60%) (p = 0.030). Conclusions: A decline in overall sleep status was observed in patients in a survey on sleep patterns three months after hip fracture. Additional management is needed to improve their sleep patterns.

Effect of Artificial Intelligence or Machine Learning on Prediction of Hip Fracture Risk: Systematic Review.

BACKGROUND: Dual energy X-ray absorptiometry (DXA) is a preferred modality for screening or diagnosis of osteoporosis and can predict the risk of hip fracture. However, the DXA test is difficult to implement easily in some developing countries, and fractures have been observed before patients underwent DXA. The purpose of this systematic review is to search for studies that predict the risk of hip fracture using artificial intelligence (AI) or machine learning, organize the results of each study, and analyze the usefulness of this technology. METHODS: The PubMed, OVID Medline, Cochrane Collaboration Library, Web of Science, EMBASE, and AHRQ databases were searched including "hip fractures" AND "artificial intelligence". RESULTS: A total of 7 studies are included in this study. The total number of subjects included in the 7 studies was 330,099. There were 3 studies that included only women, and 4 studies included both men and women. One study conducted AI training after 1:1 matching between fractured and non-fractured patients. The area under the curve of AI prediction model for hip fracture risk was 0.39 to 0.96. The accuracy of AI prediction model for hip fracture risk was 70.26% to 90%. CONCLUSIONS: We believe that predicting the risk of hip fracture by the AI model will help select patients with high fracture risk among osteoporosis patients. However, to apply the AI model to the prediction of hip fracture risk in clinical situations, it is necessary to identify the characteristics of the dataset and AI model and use it after performing appropriate validation.

Osteoporosis Feature Selection and Risk Prediction Model by Machine Learning Using a Cross-Sectional Database.

BACKGROUND: The purpose of this study was to verify the accuracy and validity of using machine learning (ML) to select risk factors, to discriminate differences in feature selection by ML between men and women, and to develop predictive models for patients with osteoporosis in a big database. METHODS: The data on 968 observed features from a total of 3,484 the Korea National Health and Nutrition Examination Survey participants were collected. To find preliminary features that were well-related to osteoporosis, logistic regression, random forest, gradient boosting, adaptive boosting, and support vector machine were used. RESULTS: In osteoporosis feature selection by 5 ML models in this study, the most selected variables as risk factors in men and women were body mass index, monthly alcohol consumption, and dietary surveys. However, differences between men and women in osteoporosis feature selection by ML models were age, smoking, and blood glucose level. The receiver operating characteristic (ROC) analysis revealed that the area under the ROC curve for each ML model was not significantly different for either gender. CONCLUSIONS: ML performed a feature selection of osteoporosis, considering hidden differences between men and women. The present study considers the preprocessing of input data and the feature selection process as well as the ML technique to be important factors for the accuracy of the osteoporosis prediction model.

Clinical and Radiological Characteristics of Lesser Trochanter Splitting Irreducible Intertrochanteric Fractures.

Background: The purpose of this study was to investigate the demographic factors and radiological characteristics of lesser trochanter splitting (LTS) irreducible intertrochanteric fractures and to report the clinical results of patients who underwent open reduction and internal fixation using dynamic hip screws (DHS). Methods: Inclusion criteria were as follows: AO/Orthopedic Trauma Association type 31A1.2, a fracture line originating from the outside of the greater trochanter that passes through the lesser trochanter, and patients who were followed up for more than 1 year with a confirmed presence or absence of bone union. A total of 13 cases were identified, accounting for 3.1% (13/416 intertrochanteric fractures). Patients were classified according to posterior sagging of the distal shaft fragment relative to the head-neck fragment (posterior sagging group, 6; non-sagging group, 7). Demographic data, comorbidities, injury mechanism, type of anesthesia, operation time, blood loss, tip-apex distance, reduction quality, leg length discrepancy (> 5 mm), long lesser trochanter sign, postoperative complications, and presence of bony union were obtained by reviewing medical records and radiological findings. Results: The mean age of the patients was 50.4 ± 10.4 years, and 12 were men. Except for 1 case (slip down), all were induced by high-energy trauma. According to the grade of reduction quality, 5 cases (38.5%) had good reduction quality and 8 cases (61.5%) had acceptable reduction quality. There were no postoperative complications, and bony union was observed in all cases. The long lesser trochanter sign was observed in 5 cases (38.5%) and leg length discrepancy greater than 5 mm was not observed. Compared with the non-sagging group, the posterior sagging group had more head-neck fragments containing more than 1/2 of the lesser trochanter length, longer operation time, and more blood loss (p < 0.05). Compared to the non-sagging group, the posterior sagging group had worse reduction quality and more long lesser trochanter signs (p < 0.05). Conclusions: Open reduction and internal fixation using DHS for the LTS irreducible intertrochanteric fractures can achieve good clinical and radiological outcomes. However, in the posterior sagging type, reduction can be more difficult with a longer operation time and higher likelihood of blood loss.

Analysis of the effects of intraoperative warming devices on surgical site infection in elective hip arthroplasty using a large nationwide database.

INTRODUCTION: The aim of our study is to analyze the association of usage and type of warming device with the risk of surgical site infection (SSI) in patients who underwent hip arthroplasty, and to analyze the factors that increase the risk of SSI if the warming device is not used. MATERIALS AND METHODS: This retrospective cross-sectional study identified subjects from data of "Evaluation of the Appropriate Use of Prophylactic Antibiotics". Included patients were defined as those who underwent elective unilateral hip hemiarthroplasty or total hip arthroplasty (THA). Patients were classified into no intraoperative warming device, forced air warming devices, and devices using conduction. Multiple logistic regression analysis was conducted to estimate adjusted odds ratios (aORs) and 95% confidence intervals (CIs) to assess the association between warming devices and SSI. RESULTS: A total of 3945 patients met the inclusion criteria. Compared to those who received an intraoperative warming device, the odds of developing SSI were 1.9 times higher in those who did not receive intraoperative warming devices (aOR 1.9; 95% CI 1.1-3.6). The risk of SSI was 2.2 times higher with forced air warming devices compared to devices using conduction but this difference was not statistically significant (aOR 2.2; 95% CI 0.7-6.8). The risk of SSI increased in males (aOR 2.8; 95% CI 1.1-7.2), in patients under 70 years of age (aOR 4.4; 95% CI 1.6-10.4), in patients with a Charlson`s comorbidity index of 2 or higher (aOR 3.3; 95% CI 1.3-8.7), and in patients who underwent THA (aOR 3.8; 95% CI 1.7-8.3) when intraoperative warming devices were not used. CONCLUSIONS: The use of intraoperative active warming devices is highly recommended to prevent SSI during elective hip arthroplasty. In particular, male patients younger than 70 years, those with a high CCI, and those undergoing THA are at significantly increased risk of SSI if intraoperative active warming devices are not used. Intraoperative warming device using conduction is likely superior to forced air warming device, but further studies are needed to confirm this.

Trajectory of bolt and length of plate in femoral neck system determine the stability of femur neck fracture and risk of subsequent subtrochanteric fracture : a finite element analysis.

BACKGROUND: This study aimed to analyze the differences in the stability of fractures, stress distribution around the distal-most screw according to the length of the plate and the trajectory of the bolt in Pauwels type III femoral neck fracture using the femoral neck system (FNS). METHODS: Finite element models of Pauwels type III femoral neck fractures were established with surgical variations in the trajectory of the bolt (central, inferior, valgus, and varus) and length of the lateral plate (1- and 2-hole plate). The models were subsequently subjected to normal walking and stair-climbing loads. RESULTS: The screw-holding cortical bone in subtrochanter in the model with a 2-hole plate and the bolt in the inferior trajectory and the models with 1-hole or 2-hole plate and the bolt in valgus trajectory had shown greater maximum principal strain than the models with central or varus trajectories. The gap and sliding distance on the fracture surface were larger with inferior or varus trajectories of the bolt and smaller with the valgus trajectory of the bolt under both loads, compared to those of the central trajectory. CONCLUSION: For the fixation of Pauwels type III femoral neck fracture, the trajectory of the FNS bolt and the length of the plate affect the mechanical stability of the fracture and the strain of cortical bone around the distal-most screw. The surgical target should stay on the central trajectory of the bolt and the 2-hole plate's mechanical benefits did not exceed the risk.

Assessing physical abilities of sarcopenia patients using gait analysis and smart insole for development of digital biomarker.

The aim of this study is to compare variable importance across multiple measurement tools, and to use smart insole and artificial intelligence (AI) gait analysis to create variables that can evaluate the physical abilities of sarcopenia patients. By analyzing and comparing sarcopenia patients with non sarcopenia patients, this study aims to develop predictive and classification models for sarcopenia and discover digital biomarkers. The researchers used smart insole equipment to collect plantar pressure data from 83 patients, and a smart phone to collect video data for pose estimation. A Mann-Whitney U was conducted to compare the sarcopenia group of 23 patients and the control group of 60 patients. Smart insole and pose estimation were used to compare the physical abilities of sarcopenia patients with a control group. Analysis of joint point variables showed significant differences in 12 out of 15 variables, but not in knee mean, ankle range, and hip range. These findings suggest that digital biomarkers can be used to differentiate sarcopenia patients from the normal population with improved accuracy. This study compared musculoskeletal disorder patients to sarcopenia patients using smart insole and pose estimation. Multiple measurement methods are important for accurate sarcopenia diagnosis and digital technology has potential for improving diagnosis and treatment.

Pre-sliding of femoral neck system improves fixation stability in pauwels type III femoral neck fracture: a finite element analysis.

BACKGROUND: Femoral neck fractures are a common injury in older adults and their management presents a significant challenge for orthopedic surgeons. The Femoral Neck System (FNS) was recently introduced for the fixation of femur neck fractures. Although neck shortening was reduced with the FNS, the complication rates were not reduced. Thus, improvements to enhance fixation stability should be made for the FNS. We hypothesized that (1) the pre-sliding technique and (2) the use of longer anti-rotation screw would increase fracture stability. This study aimed to determine the change in fracture stability using the pre-sliding technique and long anti-rotation screw in the FNS for fixation of Pauwels type III femoral neck fractures. METHODS: Finite element models of Pauwels type III femoral neck fracture fixed with pre-sliding FNS and 5-mm longer anti-rotation screw were established. The models were subjected to normal walking load. The material properties of the elements belonging to the bone were mapped by assigning the formulation with the computed tomography Hounsfield unit. RESULTS: Pauwels type III femoral neck fractures fixed with pre-slided FNS showed better fracture stability, decreasing fracture gap and sliding by 14% and 12%, respectively, under normal walking load. No element of cortical bone in any of the models had an absolute value of principal strain that exceeded 1%. The peak von Mises stress (VMS) of the implants ranged from 260 to 289 MPa, and the highest peak VMS value was 50% lower than the yield strength of the titanium alloy (800 MPa). The longer anti-rotation screw did not affect fracture stability. CONCLUSIONS: The pre-sliding technique using the FNS showed higher fracture stability than the standard fixation technique for a Pauwels type III femoral neck fracture. The longer anti-rotation screw did not contribute significantly to fixation stability. As this finite element analysis considered the inhomogeneous mechanical property of the bone, it offered equivalent mechanical conditions to investigate the components of interest.

Analysis of the Effects of COVID-19 on Hip Fractures in Korea Without Lockdown: Interrupted Time Series Analysis Using a Nationwide Cohort.

BACKGROUND: The purpose of this study was to investigate the change in the incidence rate, length of hospital stay (LOS), in-hospital mortality rate, and surgical method of hip fractures during the coronavirus disease 2019 (COVID-19) pandemic in South Korea where lockdown restrictions were not implemented. METHODS: We calculated the expected values of the incidence of hip fractures, in-hospital mortality and LOS of hip fracture patients in 2020 (COVID period) based hip fracture database of the Korean National Health Insurance Review and Assessment (HIRA) during a 9-year period from 2011 to 2019 (pre-COVID period). A generalized estimating equation model with Poisson distribution and logarithmic link function was used to estimate adjusted annual percent change (PC) of incidence rate and 95% confidence intervals (CIs). Then, we compared the annual incidence, in-hospital mortality rate and LOS in 2020 with the expected values. RESULTS: The overall incidence rate of hip fracture in 2020 was not significantly different from the expected value (PC, -5%; 95% CI, -13 to 4; P = 0.280). In women, the incidence rate of hip fracture in age groups over 70 years was smaller than the predicted value (P < 0.001). The in-hospital mortality rate was not significantly different from the expected value (PC, 5%; 95% CI, -8 to 19; P = 0.461). The mean LOS was larger than the expected value by 2% (PC, 2%; 95% CI, 1 to 3; P < 0.001). In intertrochanteric fracture, the proportion of internal fixation was smaller than the predicted value by 2% (PC, -2%; 95% CI, -3 to -1; P < 0.001), and that of hemiarthroplasty was larger than the predicted value by 8% (PC, 8%; 95% CI, 4 to 14; P < 0.001). CONCLUSIONS: In 2020, the incidence rate of hip fracture did not significantly decrease, and in-hospital mortality rate did not significantly increase compared to the expected rates, which were projected based on the HIRA hip fracture data from 2011 to 2019. Only LOS increased slightly.

A Meta-Analysis of Polymerase Chain Reaction for Prosthetic Joint Infection Diagnosis.

BACKGROUND: One of the most dangerous side effects of joint replacement for the hip, knee, shoulder, and elbow is prosthesis joint infection (PJI). Polymerase chain reaction (PCR) has been considered a promising method for PJI diagnosis due to its short diagnostic time and high sensitivity. Although several PCR methods such as multiplex PCR and broad-range PCR are useful diagnostic methods for detecting microorganisms causing PJI, values of different PCR methods for the diagnosis of PJI remain unclear. Thus, the objective of this study was to perform a meta-analysis of different PCR methods in the diagnosis of PJI to determine their diagnostic characteristics including sensitivity and specificity. METHODS: The following data were extracted: PCR method, number of patients, sample site and type, diagnosis standard, true positive, false positive, false negative, and true negative. Pooled sensitivity, specificity, positive likelihood ratio, negative likelihood ratio, and diagnostic odds ratio were calculated. Meta-regression analysis was conducted to assess heterogeneity. Subgroup analysis was also performed to assess effects of several variables on meta-analysis results. RESULTS: The current study showed that pooled sensitivity and pooled specificity were 0.70 (95% CI: 0.67 - 0.73) and 0.94 (95% CI: 0.92 - 0.95), respectively. Results of subgroup analysis indicated that sequencing method showed the lowest sensitivity (0.63, 95% CI: 0.59 - 0.67). However, after excluding studies using tissue samples directly, sequencing method showed higher sensitivity (0.83, 95% CI: 0.73 - 0.90) than other PCR methods (0.74, 95% CI: 0.69 - 0.78). CONCLUSIONS: The main significance of this study was that we attempted to classify accuracies of several PCR methods and found that sequencing with a reliable sampling method could be used as an early screening strategy for PJI. Further comparisons for PCR technologies are needed to evaluate their cost effectiveness and diagnostic procedures, not just diagnostic values, to discover the optimal one for PJI diagnosis.

How to Solve Anatomical Mismatch in Fixation of Acetabular Fractures Using an Anatomical Quadrilateral Surface Plate.

The anatomical quadrilateral surface buttress plate developed for the quadrilateral surface in an acetabular fracture, a type of fracture difficult to reduce using screws and plates due to its thinness, is a useful implant that makes surgical treatment easier. However, the anatomical structure is different for each patient, and it often does not match the contour of this plate, making detailed bending difficult. Here, we introduce a simple method for controlling the degree of reduction using this plate.

Fracture Liaison Service in Korea: 2022 Position Statement of the Korean Society for Bone and Mineral Research.

Osteoporosis and osteoporotic fractures cause socioeconomic concerns, and medical system and policies appear insufficient to prepare for these issues in Korea, where the older adult population is rapidly increasing. Many countries around the world are already responding to osteoporosis and osteoporotic fractures by adopting fracture liaison service (FLS), and such an attempt has only begun in Korea. In this article, we introduce the operation methods for institutions implementing FLS and characteristics of services, and activities of the FLS Committee for FLS implementation in the Korean Society for Bone and Mineral Research. In addition, we hope that the current position statement will contribute to the implementation of FLS in Korea and impel policy changes to enable a multidisciplinary and integrated FLS operated under the medical system.