RESUMO
Background: Mandibular tumor surgery necessitates precise osteotomies based on tumor boundaries; however, conventional osteotomies often lack accuracy in predicting osteotomy positions and planes, potentially leading to excessive resection of normal bone tissues or residual tumors, thus compromising postoperative quality of life and clinical outcomes. Robotic-assisted surgery (RAS) augmented with artificial intelligence (AI) offers precise localization capabilities, aiding surgeons in achieving accurate osteotomy positioning. This study aimed to evaluate the feasibility and accuracy of a robotic magnetic navigation system for positioning and osteotomy in an intraoral surgical trial of a mandibular tumor model. Methods: Patient computed tomography (CT) imaging data of mandibular chin and body tumors were utilized to create 3D printed models, serving as study subjects for mandibular tumor resection. Ten pairs of models were printed for the experimental and control groups. The experimental group (EG) underwent osteotomy using a robot-assisted surgical navigation system, performing osteotomy under robotic navigation following alignment based on preoperative design. The control group (CG) underwent traditional surgery, estimating osteotomy position empirically according to preoperative design. Postoperative CT scans were conducted on both models, and actual postoperative results were compared to preoperative design. Osteotomy accuracy was evaluated by positional and angular errors between preoperatively designed and actual osteotomy planes. Results: For ten randomly selected spots on the left and right sides, respectively, the EG group had mean distance errors of 0.338 mm and 0.941 mm. These values were obtained from the EG group. In the EG group, on the left side, the mean angular errors were 14.741 degrees, while on the right side, they were 13.021 degrees. For the 10 randomly selected spots on the left and right sides, respectively, the CG had mean distance errors of 1.776 mm and 2.320 mm. This is in contrast to the results obtained by the EG. It was determined that the left side had a mean angle error of 16.841 degrees, while the right side had an error of 18.416 degrees in the CG group. The above results indicated significantly lower point errors of bilateral osteotomy planes in the experimental group compared to the control group. Conclusion: This study demonstrates the feasibility of electromagnetic navigation robot-assisted intraoral osteotomy for mandibular tumors and suggests that this approach can enhance the precision of clinical surgery.
Assuntos
Neoplasias Mandibulares , Osteotomia , Procedimentos Cirúrgicos Robóticos , Humanos , Procedimentos Cirúrgicos Robóticos/métodos , Osteotomia/métodos , Osteotomia/instrumentação , Neoplasias Mandibulares/cirurgia , Neoplasias Mandibulares/diagnóstico por imagem , Tomografia Computadorizada por Raios X , Fenômenos Eletromagnéticos , Cirurgia Assistida por Computador/métodos , Inteligência Artificial , Mandíbula/cirurgia , Mandíbula/diagnóstico por imagem , Sistemas de Navegação Cirúrgica , Impressão TridimensionalRESUMO
BACKGROUND: The reliability and repeatability of stereophotogrammetry and CT in 3-dimensional anthropometric facial analysis were investigated in this study, which also explored the clinical application of supine CT. METHOD: In this study, 3D CT and 3dMD stereophotogrammetry were used on 20 healthy volunteers. The fitting distance between stereophotogrammetry and CT scans at landmark points was measured, along with facial feature measurements (Al-Al) face width (Go-Go, Zy-Zy, Ex-Ex), and hemi-face height (Sn-Gn). The intraclass correlation coefficient (ICC) was employed to assess interrater agreement and to verify the reliability of the measurement methods. Paired t -analysis was utilized for analyzing intramethod displacement. RESULTS: The alare, nasion, and pronasale points were found to be minimally influenced by different positions and are more recommended as landmark points for registration. CT demonstrated good interrater reliability on all indicators. In stereophotogrammetry, measurements for Go-Go and Zy-Zy displayed an interclass correlation coefficient (ICC) of less than 0.75. Significant differences between the 2 methods were observed for En-En, Ex-Ex, and Go-Go ( P < 0.05). Specifically, CT analysis for Go-Go showed a measurement 2.34 mm larger than that obtained with the 3dMD method. CONCLUSION: Both CT and stereophotogrammetry were found to be reliable methods for evaluating facial soft tissue. It is speculated that Go-Go measurement is primarily influenced by factors such as different positions, facial expressions, and gravity. These variables should be carefully considered during the evaluation of the mandibular angle region.
Assuntos
Face , Imageamento Tridimensional , Fotogrametria , Tomografia Computadorizada por Raios X , Humanos , Fotogrametria/métodos , Feminino , Face/diagnóstico por imagem , Face/anatomia & histologia , Masculino , Adulto , Tomografia Computadorizada por Raios X/métodos , Reprodutibilidade dos Testes , Adulto Jovem , Cefalometria/métodos , Antropometria/métodos , Voluntários Saudáveis , Pontos de Referência AnatômicosRESUMO
BACKGROUND: Melanoma, the most lethal form of skin cancer, presents substantial challenges despite effective surgical interventions for in situ lesions. Regulatory T cells (Tregs) wield a pivotal immunomodulatory influence within the tumor microenvironment, yet their impact on melanoma prognosis and direct molecular interactions with melanoma cells remain elusive. This investigation employs single-cell analysis to unveil the intricate nature of Tregs in human melanoma. METHODS: Single-cell RNA and bulk sequencing data, alongside clinical information, were obtained from public repositories. Initially, GO and GSEA analyses were employed to delineate functional disparities among distinct cell subsets. Pseudotime and cell-cell interconnection analyses were conducted, followed by an endeavor to construct a prognostic model grounded in Treg-associated risk scores. This model's efficacy was demonstrated via PCA and K-M analyses, with multivariate Cox regression affirming its independent prognostic value in melanoma patients. Furthermore, immune infiltration analysis, immune checkpoint gene expression scrutiny, and drug sensitivity assessments were performed to ascertain the clinical relevance of this prognostic model. RESULTS: Following batch effect correction, 80 025 cells partitioned into 31 clusters, encompassing B cells, plasma cells, endothelial cells, fibroblasts, melanoma cells, monocytes, macrophages, and T_NK cells. Within these, 4240 CD4+ T cells were subclassified into seven distinct types. Functional analysis underscored the immunomodulatory function of Tregs within the melanoma tumor microenvironment, elucidating disparities among Treg subpopulations. Notably, the ITGB2 signaling pathway emerged as a plausible molecular nexus linking Tregs to melanoma cells. Our prognostic signature exhibited robust predictive capacities for melanoma prognosis and potential implications in evaluating immunotherapy response. CONCLUSION: Tregs exert a critical role in immune suppression within the melanoma tumor microenvironment, revealing a potential molecular-level association with melanoma cells. Our innovative Treg-centered signature introduces a promising prognostic marker for melanoma, holding potential for future clinical prognostic assessments.
RESUMO
This study aimed to probe into the anatomic course of inferior alveolar nerve canal (IANC) in hemifacial microsomia (HFM) on a large scale, morphological observations and further quantitative study were performed. Patients were classified by Pruzansky-Kaban classification. The anatomic course of IANC was analyzed morphologically with three-dimensional (3D) imaging software among 248 patients. Seven distances between fixed landmarks on both sides were measured for 236 patients. The differences between affected and unaffected sides were compared. Significant differences were found in the entrance (P < 0.001), route (P < 0.001), and exit (P < 0.05) of IANC in type IIb and III HFM. The higher the degree of mandibular deformity was, the higher the incidence of IANC variation was (P < 0.05). The distances in the horizontal aspect of IANC including from mandibular foramen to mental foramen (P < 0.05) and from mental foramen to gonion (P < 0.05) were significantly shorter on the affected side. Abnormalities of the anatomical course of IANC exist in patients with Pruzansky-Kaban type IIb and type III HFM. The reduction of IANC on the affected side in the horizontal distance is more obvious. Three-dimensional imaging assessment is recommended before surgery.
Assuntos
Síndrome de Goldenhar , Humanos , Tomografia Computadorizada por Raios X/métodos , Mandíbula/diagnóstico por imagem , Imageamento Tridimensional/métodos , Nervo Mandibular/diagnóstico por imagemRESUMO
BACKGROUND: Mandibular distraction osteogenesis (MDO) is a major part of the treatment for hemifacial microsomia patients. Due to the narrow surgical field of the intraoral approach, osteotomy accuracy is highly dependent on the surgeons' experience. Electromagnetic (EM) tracking systems can achieve satisfying accuracy to provide helpful real-time surgical navigation. Our research team developed an EM navigation system based on artificial intelligence, which has been justified in improving the accuracy of osteotomy in the MDO in animal experiments. This study aims to clarify the effect of the EM navigation system in improving the MDO accuracy for hemifacial microsomia patients. METHODS: This study is designed as a single-centered and randomized controlled trial. Altogether, 22 hemifacial microsomia patients are randomly assigned to the experiment and control groups. All patients receive three-dimensional CT scans and preoperative surgical plans. The EM navigation system will be set up for those in the experiment group, and the control group will undergo traditional surgery. The primary outcome is the surgical precision by comparing the osteotomy position of pre- and postoperative CT scan images through the Geomagic Control software. The secondary outcomes include mandibular symmetry (occlusal plane deviation angle, mandibular ramus height, and body length), pain scale, and complications. Other indications, such as the adverse events of the system and the satisfactory score from patients and their families, will be recorded. DISCUSSION: This small sample randomized controlled trial intends to explore the application of an EM navigation system in MDO for patients, which has been adopted in other surgeries such as orthognathic procedures. Because of the delicate structures of children and the narrow surgical view, accurate osteotomy and protection of nearby tissue from injury are essential for successful treatment. The EM navigation system based on artificial intelligence adopted in this trial is hypothesized to provide precise real-time navigation for surgeons and optimally improve patient outcomes, including function and aesthetic results. The results of this trial will extend the application of new navigation technology in pediatric plastic surgery. TRIAL REGISTRATION: Chinese Clinical Trial Registry ChiCTR2200061565. Registered on 29 June 2022.
Assuntos
Síndrome de Goldenhar , Osteogênese por Distração , Criança , Humanos , Pré-Escolar , Adolescente , Síndrome de Goldenhar/diagnóstico por imagem , Síndrome de Goldenhar/cirurgia , Inteligência Artificial , Osteogênese por Distração/efeitos adversos , Osteogênese por Distração/métodos , Método Simples-Cego , Mandíbula/diagnóstico por imagem , Mandíbula/cirurgia , Ensaios Clínicos Controlados Aleatórios como AssuntoAssuntos
Face , Envelhecimento da Pele , Humanos , Face/diagnóstico por imagem , Pele , Fotografação/métodosRESUMO
Introduction: Mandibular distraction osteogenesis, a recommended therapy for hemifacial microsomia, has brought much agony because of its traumatic procedures and peri-osteotomy complications. Our study aims to retrospectively compare piezoelectric osteotome with conventional reciprocal bone saw for hemifacial microsomia patients and validate its meliority in operability, surgical risks and patient outcomes. Methods: All patients included underwent osteotomies conducted by either piezosurgery or bone saw. Information of intraoperative blood loss, operation duration, postoperative pain and complications was collected from patient files, ward round inspections and follow-ups. Results: Among all 40 patients, 13 underwent piezo-osteotomy. Piezosurgery performed better than conventional reciprocal bone saw in decreasing intraoperative blood loss (p < 0.001) and operation duration (p = 0.030). No significant difference was found in hospitalization duration, total expenses or complication rates between two groups. There were positive relations between operation duration and intraoperative blood loss (p = 0.042), and between hospitalization duration and total expenses (p = 0.0096). Postoperative pain scores of both groups declined over time while the piezosurgery group had a statistically significant tendency (p = 0.006) to suffer less than the conventional group. Discussion: Piezosurgery diminishes intraoperative blood loss, operative duration, and postoperative pain, making an alternative to conventional osteotomes to mitigate patients' and families' peri-osteotomy sufferings, and a more humane solution to HFM.
RESUMO
Background: Melanoma is typically regarded as the most dangerous form of skin cancer. Although surgical removal of in situ lesions can be used to effectively treat metastatic disease, this condition is still difficult to cure. Melanoma cells are removed in great part due to the action of natural killer (NK) and T cells on the immune system. Still, not much is known about how the activity of NK cell-related pathways changes in melanoma tissue. Thus, we performed a single-cell multi-omics analysis on human melanoma cells in this study to explore the modulation of NK cell activity. Materials and methods: Cells in which mitochondrial genes comprised > 20% of the total number of expressed genes were removed. Gene ontology (GO), gene set enrichment analysis (GSEA), gene set variation analysis (GSVA), and AUCcell analysis of differentially expressed genes (DEGs) in melanoma subtypes were performed. The CellChat package was used to predict cell-cell contact between NK cell and melanoma cell subtypes. Monocle program analyzed the pseudotime trajectories of melanoma cells. In addition, CytoTRACE was used to determine the recommended time order of melanoma cells. InferCNV was utilized to calculate the CNV level of melanoma cell subtypes. Python package pySCENIC was used to assess the enrichment of transcription factors and the activity of regulons in melanoma cell subtypes. Furthermore, the cell function experiment was used to confirm the function of TBX21 in both A375 and WM-115 melanoma cell lines. Results: Following batch effect correction, 26,161 cells were separated into 28 clusters and designated as melanoma cells, neural cells, fibroblasts, endothelial cells, NK cells, CD4+ T cells, CD8+ T cells, B cells, plasma cells, monocytes and macrophages, and dendritic cells. A total of 10137 melanoma cells were further grouped into seven subtypes, i.e., C0 Melanoma BIRC7, C1 Melanoma CDH19, C2 Melanoma EDNRB, C3 Melanoma BIRC5, C4 Melanoma CORO1A, C5 Melanoma MAGEA4, and C6 Melanoma GJB2. The results of AUCell, GSEA, and GSVA suggested that C4 Melanoma CORO1A may be more sensitive to NK and T cells through positive regulation of NK and T cell-mediated immunity, while other subtypes of melanoma may be more resistant to NK cells. This suggests that the intratumor heterogeneity (ITH) of melanoma-induced activity and the difference in NK cell-mediated cytotoxicity may have caused NK cell defects. Transcription factor enrichment analysis indicated that TBX21 was the most important TF in C4 Melanoma CORO1A and was also associated with M1 modules. In vitro experiments further showed that TBX21 knockdown dramatically decreases melanoma cells' proliferation, invasion, and migration. Conclusion: The differences in NK and T cell-mediated immunity and cytotoxicity between C4 Melanoma CORO1A and other melanoma cell subtypes may offer a new perspective on the ITH of melanoma-induced metastatic activity. In addition, the protective factors of skin melanoma, STAT1, IRF1, and FLI1, may modulate melanoma cell responses to NK or T cells.
Assuntos
Melanoma , Neoplasias Cutâneas , Humanos , Células Endoteliais , Multiômica , Melanoma/genética , Células Matadoras NaturaisRESUMO
PURPOSE: Surgical guide plates can improve the accuracy of surgery, although their design process is complex and time-consuming. This study aimed to use artificial intelligence (AI) to design standardized mandibular angle ostectomy guide plates and reduce clinician workload. METHODS: An intelligence algorithm was designed and trained to design guide plates, with a safety-ensuring penalty factor added. A single-center retrospective cohort study was conducted to test the algorithm among patients who had visited our hospital between 2020 and 2021 for mandibular angle ostectomy. We included patients diagnosed with mandibular angle hypertrophy and excluded those combined with other facial malformations. The guide plate design method acted as the primary predictor, which was AI algorithm vs. experienced residents. Moreover, the symmetry of plate-guided ostectomy was chosen as the primary outcome. The safety, shape, location, effectiveness, and design duration of the guide plate were also recorded. The independent samples t-test and Pearson's chi-squared test were used and P-values < 0.05 were considered significant. RESULTS: Fifty patients (7 men, 43 women; 27 ± 4 years) were included. The two groups differed significantly in terms of safety (7.02 vs. 5.25, P < 0.05) and design duration (24.98 vs. 1685.08, P ï¼ 0.05). The ostectomy symmetry and shape, location, and effectiveness of the guide plates did not differ significantly between the two groups. CONCLUSIONS: The intelligent algorithm can improve safety and save time for guide plate design, ensuring other quality of the guide plates. It has good potential applicability in accurate mandibular angle ostectomy.
Assuntos
Inteligência Artificial , Mandíbula , Masculino , Humanos , Feminino , Estudos Retrospectivos , Mandíbula/cirurgia , Placas ÓsseasRESUMO
IntroductionIn craniofacial surgery, magnetic navigation systems can effectively extend the doctor's limited visual range, improve their surgical precision, shorten the operation time, and reduce the incidence of surgical complications. Owing to the ease of magnetic navigation, the accuracy of the magnetic navigation system is affected by various equipment in the operating room. Therefore, its large-scale application is lacking because the navigation accuracy requirement can be extremely high during craniofacial surgery. Therefore, the accuracy of magnetic navigation systems is crucial. Various surgical instruments have been evaluated to effectively reduce the interference of magnetic navigation systems with surgical instruments. In craniofacial surgery, magnetic navigation systems can effectively extend the doctor's limited visual range, improve their surgical precision, shorten the operation time, and reduce the incidence of surgical complications. Owing to the ease of magnetic navigation, the accuracy of the magnetic navigation system is affected by various equipment in the operating room. Therefore, its large-scale application is lacking because the navigation accuracy requirement can be extremely high during craniofacial surgery. Therefore, the accuracy of magnetic navigation systems is crucial. Various surgical instruments have been evaluated to effectively reduce the interference of magnetic navigation systems with surgical instruments. In the surgical environment, the use of surgical instruments during mandibular surgery was simulated by selecting several conventional surgical instruments to record errors in the magnetic navigation system. The fluctuation values of the magnetic navigation errors were subsequently estimated and changes in its accuracy measured. MATLAB was used to calculate and analyze the fluctuations of the magnetic navigation errors. As results, the high-frequency electrosurgical system caused the greatest interference with the magnetic navigation system during surgery while powered on, with a maximum fluctuation error value of 1.8120 mm, and the maximum fluctuation error values of the stitch scissors, teeth forceps, and a needle holder were 1.3662, 1.3781, and 0.3912 mm, respectively. The closer the instrument is to the magnetic field generator or navigation target, the greater its impact. In conclusion, stitch scissors, teeth forceps, a needle holder, and the high-frequency electrosurgical system all affect magnetic navigation system accuracy. Therefore, it is necessary to avoid magnetic navigation system use and surgical instrument disturbances during surgery or select surgical instruments that do not interfere with the system. Surgical instruments must be evaluated for electromagnetic interference before they can be used in surgery with a magnetic navigation system.
Assuntos
Robótica , Cirurgia Assistida por Computador , Humanos , Cirurgia Assistida por Computador/métodos , Instrumentos Cirúrgicos , Duração da Cirurgia , Fenômenos MagnéticosRESUMO
Introduction: This study aims to quantitively analyze mandibular ramus and body deformities, assessing the asymmetry and progression in different components. Methods: This is a retrospective study on hemifacial microsomia children. They were divided into mild/severe groups by Pruzansky-Kaban classification and into three age groups (<1 year,1-5 years, 6-12 years old). Linear and volumetric measurements of the ramus and the body were collected via their preoperative imaging data to compare between the different sides and severities, using independent and paired tests, respectively. The progression of asymmetry was assessed by changes in affected/contralateral ratios with age using multi-group comparisons. Results: Two hundred and ten unilateral cases were studied. Generally, the affected ramus and body were significantly smaller than those on the contralateral side. Linear measurements on the affected side were shorter in the severe group. Regarding affected/contralateral ratios, the body was less affected than the ramus. Progressively decreased affected/contralateral ratios of body length, dentate segment volume, and hemimandible volume were found. Discussion: There were asymmetries in mandibular ramus and body regions, which involved the ramus more. A significant contribution to progressive asymmetry from the body suggests treatment focus in this region.
RESUMO
Introduction: This study aimed to verify the accuracy and safety of distraction osteogenesis for hemifacial microsomia assisted by a robotic navigation system based on artificial intelligence. Methods: The small sample early-phase single-arm clinical study, available at http://www.chictr.org.cn/index.aspx, included children aged three years and older diagnosed with unilateral hemifacial microsomia (Pruzansky-Kaban type II). A preoperative design was performed, and an intelligent robotic navigation system assisted in the intraoperative osteotomy. The primary outcome was the accuracy of distraction osteogenesis, including the positional and angular errors of the osteotomy plane and the distractor, by comparing the preoperative design plan with the actual images one week postoperatively. Perioperative indicators, pain scales, satisfaction scales, and complications at one week were also analyzed. Results: Four cases (mean 6.5 years, 3 type IIa and 1 type IIb deformity) were included. According to the craniofacial images one week after surgery, the osteotomy plane positional error was 1.77 ± 0.12 mm, and the angular error was 8.94 ± 4.13°. The positional error of the distractor was 3.67 ± 0.23 mm, and the angular error was 8.13 ± 2.73°. Postoperative patient satisfaction was high, and no adverse events occurred. Discussion: The robotic navigation-assisted distraction osteogenesis in hemifacial microsomia is safe, and the operational precision meets clinical requirements. Its clinical application potential is to be further explored and validated.
RESUMO
The relationship between oxidized lipid metabolism and the immunological function of cancer is well known. However, the functions and regulatory mechanisms of lncRNAs associated with oxidized lipid metabolism in head and neck squamous cell carcinoma (HNSCC) remain to be fully elucidated. In this study, we established an oxidized lipid metabolism-related lncRNA prognostic signature to assess the prognosis and immune infiltration of HNSCC patients. The HNSCC transcriptome was obtained from The Cancer Genome Atlas. The choice of the target genes with a relevance score greater than 10 was performed via a correlation analysis by GeneCards. Patients were categorized by risk score and generated with multivariate Cox regression, which was then validated and evaluated using the Kaplan-Meier analysis and time-dependent receiver operating characteristics (ROC). A nomogram was constructed by combining the risk score with the clinical data. We constructed a risk score with 24 oxidized lipid metabolism-related lncRNAs. The areas' 1-, 2-, and 3-year OS under the ROC curve (AUC) were 0.765, 0.724, and 0.724, respectively. Furthermore, the nomogram clearly distinguished the survival probabilities of patients in high- and low-risk groups, between which substantial variations were revealed by immune infiltration analysis. The results supported the fact that oxidized lipid metabolism-related lncRNAs might predict prognoses and assist with differentiating amid differences in immune infiltration in HNSCC.
RESUMO
BACKGROUND: Hemifacial microsomia (HFM) is one of the most common congenital craniofacial condition often accompanied by masseter muscle involvement. U-Net neural convolution network for masseter segmentation is expected to achieve an efficient evaluation of masseter muscle. METHODS: A database was established with 108 patients with HFM from June 2012 to June 2019 in our center. Demographic data, OMENS classification, and 1-mm layer thick 3-dimensional computed tomography were included. Two radiologists manually segmented masseter muscles in a consensus reading as the ground truth. A test set of 20 cases was duplicated into 2 groups: an experimental group with the intelligent algorithm and a control group with manual segmentation. The U-net follows the design of 3D RoI-Aware U-Net with overlapping window strategy and references to our previous study of masseter segmentation in a healthy population system. Sorensen dice-similarity coefficient (DSC) muscle volume, average surface distance, recall, and time were used to validate compared with the ground truth. RESULTS: The mean DSC value of 0.794±0.028 for the experiment group was compared with the manual segmentation (0.885±0.118) with α=0.05 and a noninferiority margin of 15%. In addition, higher DSC was reported in patients with milder mandible deformity ( r =0.824, P <0.05). Moreover, intelligent automatic segmentation takes only 6.4 seconds showing great efficiency. CONCLUSIONS: We first proposed a U-net neural convolutional network and achieved automatic segmentation of masseter muscles in patients with HFM. It is a great attempt at intelligent diagnosis and evaluation of craniofacial diseases.
Assuntos
Síndrome de Goldenhar , Humanos , Músculo Masseter , Inteligência Artificial , Redes Neurais de Computação , Algoritmos , Processamento de Imagem Assistida por Computador/métodosRESUMO
The authors attempt to approach hemifacial microsomia with macroscopic techniques and look for a link between clinical manifestations with pathogenesis. In this study, for the first time mandibular medullary cavities as essential parts of the mandible were intravitally measured based on the 3-dimensional models. A total of 153 patients were included. The 3-dimensional models of patients' mandibles were reconstructed and medullary cavity volumes (mm 3 ) were measured. The ratio of medullary cavity volume to mandible volume was calculated to determine the proportion of the marrow in the bone. Statistical significance was found in mandible volumes ( P <0.001) and medullary cavity volumes ( P <0.001) on different sides. Medullary cavity volumes were significantly related to mandible volumes on both sides (both P <0.001). Medullary cavity volumes on the nonaffected and affected side were both in correlation with age but in different degrees ( r =0.214, P =0.008 versus r =0.170, P =0.036). The ratios of medullary cavity volume and the mandible were significantly different ( P <0.001) on 2 sides. The volume ratio on the nonaffected side correlated to age while this correlation did not exist on the affected side ( r =0.195, P =0.016 versus r =0.129, P =0.112). A smaller medullary cavity found on the affected side could lead to a reduced amount of bone marrow cells and consequently reduced osteogenic and hematopoietic potential. This could result in abnormal bone formation on the affected side of mandible. Proportions of marrow in bone on the affected side irrelevant to patients' ages signify a poorer potential of expansion. This may explain a higher reluctancy of growth in affected mandibular sides.
Assuntos
Síndrome de Goldenhar , Humanos , Mandíbula/patologia , Assimetria Facial/patologiaRESUMO
INTRODUCTION: In recent years, 3-dimensional (3D) printing has been widely used in regenerative medicine research and other fields because of its ability to customize macroscopic morphology and precisely control microstructure. Polymer scaffolds are 1 of the commonly used 3D bioprinting materials for defect repair and have recently been a research focus. Our article explored the bone-formation accelerating effect of 3D-printed porous scaffold Poly(glycerol sebacate) [PGS] in the critical bone defect of an enhancing rabbit mandibular model. Also, we overview and summarize the classification of 3D bioprinting materials and prospects for their various application scenarios in craniofacial reconstruction surgery. MATERIALS AND METHODS: A PGS elastomer scaffold was prepared by polymerizing equimolar amounts of sebacic acid and glycerol using a biological 3D printer. Six male New Zealand white rabbits were prepared (3 for the control group and 3 for the PGS group), each weighing 3 kg. Osteotomy was performed at the anterior edge of the ascending ramus of the mandible with a bone saw to open the 8 mm defect. Defects of the control group were empty, and defects of the PGS group were put into 8 mm-wide PGS elastomer scaffolds. The rabbits were euthanized 6 weeks after the operation, and the postoperative mandibles were collected. Information (presence or absence of pus from infection, nonunion, degree of macroscopic bone healing) was recorded, and the skeletal tissue was fixed in a paraformaldehyde solution. RESULTS: The mandible on the enhanced side was significantly longer than that on the opposite side, and the contralateral incisor was hyperplasia. The mandibles of rabbits in each group healed well, and there was no obvious local infection and purulence. The gross specimen appearance showed that both ends of the defect were connected. When comparing the reconstructed mandibles of the two groups, it is apparent that the width and thickness of the new bone in the PGS group were significantly better than that in the control group. CONCLUSIONS: This article verifies the effect of 3D polypore PGS scaffolds in animal craniomaxillofacial bone defects and introduces various application scenarios of 3D printing materials in craniomaxillofacial reconstruction surgery. There are quite good application prospects for 3D bioprinting in animal experiments and even clinical treatment of craniofacial defects.
Assuntos
Bioimpressão , Alicerces Teciduais , Masculino , Coelhos , Animais , Alicerces Teciduais/química , Osteogênese , Mandíbula , Elastômeros , Impressão Tridimensional , Engenharia TecidualRESUMO
Rapid developments in 3-dimensional(3D) printing technologies in craniofacial plastic surgery have provided a new treatment modality for patients. In this article, we intend to share our institution's experience using 3D printing in 3 modes-namely, 3-dimensional printing for manufacturing contour models, guides, and implants. Fifty-nine patients were enrolled in our study between September 2009 and September 2021. Among the 3D printing-assisted technologies, 41 cases were used for congenital malformations, 82 for trauma repair, and 112 for cosmetic surgery. Preoperative design and postoperative data were compared and analyzed based on imaging data. In craniofacial plastic surgery, all patients had excellent postoperative objective bone measurements close to the preoperative design and improved esthetic appearance. Our survey of postoperative satisfaction showed that patients were quite satisfied with the surgery, especially concerning congenital deformities. Rapid prototyping 3-dimensional printing technology provides a practical and anatomically accurate means to produce patient-specific and disease-specific translational tools. These models can be used for surgical planning, simulation, and clinical evaluation. Expanding this technology in craniofacial plastic surgery will provide adequate assistance to practitioners and patients.
Assuntos
Implantes Dentários , Procedimentos de Cirurgia Plástica , Cirurgia Assistida por Computador , Cirurgia Plástica , Humanos , Impressão Tridimensional , Cirurgia Assistida por Computador/métodosRESUMO
The purpose of this study was to compare the safety and effect of piezosurgery with conventional osteotomy in a box-shifting procedure for orbital hypertelorism (ORH) correction surgery. This study retrospectively analyzed the clinical record of 10 ORH patients aged from 5 to 12 years, and they were second-degree ORH with an interorbital distance (IOD) of 35 to 37.8 mm. Three of them received the osteotomy with piezosurgery (the piezosurgery group), whereas the other 7 patients received osteotomy with the conventional osteotomy method (the control group). They were compared with age and preoperative IOD. All the patients' IOD was effectively improved to normal range after the surgery. The results showed that the application of piezosurgery did not prolong the surgery time (piezosurgery group: 8.3±0.5 hours; control group: 8.7±1.4 hours, P =0.68). Furthermore, the patients in the piezosurgery group had less drainage volume (piezosurgery group: 79.1±12 mL; the control group: 170±41.3 mL, P =0.0065) and shorter postoperative hospital stay (piezosurgery group: 8.3±2.0 d; control group: 12.43±2.29 d, P =0.029). There were 2 patients who had wound infections, 1 in the piezosurgery group and 1 in the control group, respectively. However, 1 patient in the control group suffered from cerebrospinal fluid leakage. On the basis of the results, the application of piezosurgery benefited the patients on a better and smoother recovery course with less drainage and shorter hospital stays. The advantages of piezosurgery are the fine and precise osteotomy and the protection for soft tissue, which make it a comparatively safe and effective tool for craniofacial surgery, especially for young patients.
Assuntos
Hipertelorismo , Humanos , Pré-Escolar , Criança , Hipertelorismo/cirurgia , Piezocirurgia/métodos , Estudos Retrospectivos , Osteotomia/métodos , Duração da CirurgiaRESUMO
Since our team reported the application of robot-assisted surgery in facial contouring surgery in 2020, further clinical trials with large samples have been conducted. This paper will report the interim results of a single-center, large-sample randomized controlled trial of the first robot developed by our team for facial contouring surgery. Meanwhile, this research field will be systematically reviewed and prospected.
Assuntos
Procedimentos Ortopédicos , Procedimentos Cirúrgicos Robóticos , Humanos , Procedimentos Cirúrgicos Robóticos/métodos , Face , Ossos FaciaisRESUMO
The authors browsed through past genetic findings in hemifacial microsomia along with our previously identified mutations in ITGB4 and PDE4DIP from whole genome sequencing of hemifacial microsomia patients. Wondering whether these genes influence mandibular bone modeling by regulation on osteogenesis, the authors approached mechanisms of hemifacial microsomia through this investigation into gene knockdown effects in vitro. MC3T3E1 cells were divided into 5 groups: the negative control group without osteogenesis induction or siRNA, the positive control group with only osteogenesis induction, and 3 gene silenced groups with both osteogenesis induction and siRNA. Validation of transfection was through fluorescence microscopy and quantitative real-time Polymerase chain reaction on knockdown efficiency. Changes in expression levels of the 3 genes during osteogenesis and impact of Itgb4 and Pde4dip knockdown on osteogenesis were examined by quantitative real-time Polymerase chain reaction, alkaline phosphatase, and alizarin red staining. Elevation of osteogenic genes Alpl, Col1a1, Bglap, Spp1, and Runx2 verified successful osteogenesis. Both genes were upregulated under osteogenic induction, while they had different trends over time. Intracellular fluorophores under microscope validated successful transfection and si-m-Itgb4_003, si-m-Pde4dip_002 had satisfactory knockdown effects. During osteogenesis, Pde4dip knockdown enhanced Spp1 expression (1.95±0.13 folds, P =0.045). The authors speculated that these genes may have different involvements in osteogenesis. Stimulated expression of Spp1 by Pde4dip knockdown may suggest that Pde4dip inhibits osteogenesis.