Host-Host Interactions Enhanced the Structural Rigidity in a 6-Fold Interpenetrated Diamondoid Metal-Organic Framework Exhibiting C2H2/C2H4 Separation.

Multi-interpenetrated metal-organic frameworks (MOFs) have exhibited excellent performance in selective adsorption due to the variable post-interspersed flexibility, but the design and control remain challenging. Herein, two anthracene-based ligands, 4,4'-(anthracene-9,10-diyl)dibenzoic acid (H2L1) and 9,10-di(pyridin-4-yl)anthracene (L2), are used to construct a new three-dimensional 6-fold interpenetrated MOF [Zn(L1)(L2)]n (NBU-X1), which exhibits multiple C-H···π interactions that enhance the structural rigidity, thereby entangling with a C2H2/C2H4 separation performance. In this material, the incorporation of abundant anthracene rings within the framework not only partitions and restricts the pore window size to a quasi-double pore but also stabilizes it through host-host interactions. The structural stability upon heating or guest displacement/removal has been investigated by single-crystal X-ray diffraction and in situ variable-temperature powder X-ray diffraction, in contrast to the extreme flexibility of most multi-interpenetrated MOFs. The performance of purifying C2H4 from C2H2/C2H4 mixtures has been proved by dynamic breakthrough tests.

Impact Analysis of Photoperiodic Disorder on the Eyestalk of Chinese Mitten Crab (Eriocheir sinensis) through High-Throughput Sequencing Technology.

Light is an indispensable factor in the healthy growth of living organisms, and alterations in the photoperiod can have consequences for body homeostasis. The eyestalk is a photosensitive organ that secretes various hormones to regulate the Chinese mitten crab (Eriocheir sinensis). However, the photoperiod-dependent eyestalk patterns of gene expression that may underlie changes in body homeostasis are unknown. In this study, we investigated the molecular mechanisms involved in eyestalk transcriptomic responses in E. sinensis under different photoperiod regimes on days 2, 4, and 6. The photoperiods tested were 12, 24, and 0 h light/day. In total, we obtained 110, 958, 348 clean datasets and detected 1809 differentially expressed genes (DEGs). Genes involved in the crustacean hyperglycemic hormone superfamily and juvenile hormones were observed, which play important roles in gonadal development, growth, and immunity in E. sinensis and may also be involved in photoperiod adaptation. In addition, the MAPK signaling pathway was the only signaling pathway identified in the continuous light group but was absent in the continuous darkness group. We suggest that the MAPK pathway is highly responsive to light input during the subjective night and insensitive to light during the middle of the subjective day. These results provide insight into the molecular mechanisms underlying the effects of photoperiod on the immune regulation of E. sinensis.

Metal Halides for High-Capacity Energy Storage.

High-capacity electrochemical energy storage systems are more urgently needed than ever before with the rapid development of electric vehicles and the smart grid. The most efficient way to increase capacity is to develop electrode materials with low molecular weights. The low-cost metal halides are theoretically ideal cathode materials due to their advantages of high capacity and redox potential. However, their cubic structure and large energy barrier for deionization impede their rechargeability. Here, the reversibility of potassium halides, lithium halides, sodium halides, and zinc halides is achieved through decreasing their dimensionality by the strong π-cation interactions between metal cations and reduced graphene oxide (rGO). Especially, the energy densities of KI-, KBr-, and KCl-based materials are 722.2, 635.0, and 739.4 Wh kg-1 , respectively, which are higher than those of other cathode materials for potassium-ion batteries. In addition, the full-cell with 2D KI/rGO as cathode and graphite as anode demonstrates a lifespan of over 150 cycles with a considerable capacity retention of 57.5%. The metal halides-based electrode materials possess promising application prospects and are worthy of more in-depth researches.

Reduced Graphene Oxide-Polypyrrole Aerogel-Based Coaxial Heterogeneous Microfiber Enables Ultrasensitive Pressure Monitoring of Living Organisms.

Pressure sensors for living organisms can monitor both the movement behavior of the organism and pressure changes of the organ, and they have vast perspectives for the health management information platform and disease diagnostics/treatment through the micropressure changes of organs. Although pressure sensors have been widely integrated with e-skin or other wearable systems for health monitoring, they have not been approved for comprehensive surveillance and monitoring of living organisms due to their unsatisfied sensing performance. To solve the problem, here, we introduce a novel structural design strategy to manufacture reduced graphene oxide-polypyrrole aerogel-based microfibers with a typical coaxial heterogeneous structure, which significantly enhances the sensitivity, resolution, and stability of the derived pressure microsensors. The as-fabricated pressure microsensors exhibit ultrahigh sensitivities of 12.84, 18.27, and 4.46 kPa-1 in the pressure ranges of 0-20, 20-40, and 40-65 Pa, respectively, high resolution (0.2 Pa), and good stability in 450 cycles. Furthermore, the microsensor is applied to detect the movement behavior and organic micropressure changes for mice and serves as a platform for monitoring micropressure for the integrative diagnosis both in vivo and in vitro of organisms.

A Universal Approach to Aqueous Energy Storage via Ultralow-Cost Electrolyte with Super-Concentrated Sugar as Hydrogen-Bond-Regulated Solute.

Aqueous energy-storage systems have attracted wide attention due to their advantages such as high security, low cost, and environmental friendliness. However, the specific chemical properties of water induce the problems of narrow electrochemical stability window, low stability of water-electrode interface reactions, and dissolution of electrode materials and intermediate products. Therefore, new low-cost aqueous electrolytes with different water chemistry are required. The nature of water depends largely on its hydroxyl-based hydrogen bonding structure. Therefore, the super-concentrated hydroxyl-rich sugar solutions are designed to change the original hydrogen bonding structure of water. The super-concentrated sugars can reduce the free water molecules and destroy the tetrahedral structure, thus lowering the binding degree of water molecules by breaking the hydrogen bonds. The ionic electrolytes based on super-concentrated sugars have the expanded electrochemical stability window (up to 2.812 V), wide temperature adaptability (-50 to 80 °C), and fair ionic conductivity (8.536 mS cm-1 ). Aqueous lithium-, sodium-, potassium-ion batteries and supercapacitors using super-concentrated sugar-based electrolytes demonstrate an excellent electrochemical performance. The advantages of ultralow cost and high universality enable a great practical application potential of the super-concentrated sugar-based aqueous electrolytes, which can also provide great experimental and theoretical assistance for further research in water chemistry.

Thermal and mechanical reinforcement of a novel paraffin-based hydroxyl-terminated polybutadiene (HTPB) binder containing a three-dimension (3D) diurea-paraffin wax (DU-PW) for prevention of PW leakage.

Leakage of paraffin wax (PW) is a major concern in the development of polymer bonded explosive (PBX) systems because it relates to the amount of PW that can be used as a desensitizer or a fuel, which, in turn, affects the mechanical performance and tolerance of PBX in high-temperature environments. Hydroxyl-terminated polybutadiene (HTPB) binders significantly contribute desirable polymer features to PBX. Thus, a three-dimension (3D) high-temperature non-flowing diurea-paraffin wax (DU-PW) composite was synthesized and creatively employed to a HTPB binder. DU-PW/PW/HTPB composites with different contents of the 3D DU-PW phase change material (PCM) were prepared through a cast molding process. The differential scanning calorimetry (DSC) results demonstrate that these composites can show high phase-change enthalpies and good thermal reliability. As observed from the scanning electron microscope (SEM) photographs, adding DU-PW can clearly reduce the number of holes caused by the leaked PW on the fracture surface of DU-PW/HTPB. Moreover, the addition of DU-PW can remarkably reduce the leakage of PW and improve the thermal stability as well as mechanical properties of the PW-based HTPB. These observations present the potential of utilizing form-stable PCM (FSPCM) to solve the problem of PW leakage in PBX systems.