Performance evaluation of a new sponge-based moving bed biofilm reactor for the removal of pharmaceutical pollutants from real wastewater.

Pharmaceutical pollutants, a group of emerging contaminants, have attracted outstanding attention in recent years, and their removal from aquatic environments has been addressed. In the current study, a new sponge-based moving bed biofilm reactor (MBBR) was developed to remove chemical oxygen demand (COD) and the pharmaceutical compound Ibuprofen (IBU). A 30-L pilot scale MBBR was constructed, which was continuously fed from the effluent of the first clarifier of the Southern Tehran wastewater treatment plant. The controlled operational parameters were pH in the natural range, Dissolved Oxygen of 1.5-2 mg/L, average suspended mixed liquor suspended solids (MLSS), and mixed liquor volatile suspended solids (MLVSS) of 1.68 ± 0.1 g/L and 1.48 ± 0.1 g/L, respectively. The effect of hydraulic retention time (HRT) (5 h, 10 h, 15 h), filling ratio (10%, 20%, 30%), and initial IBU concentration (2 mg/L, 5 mg/L, 10 mg/L) on removal efficiencies was assessed. The findings of this study revealed a COD removal efficiency ranging from 48.9 to 96.7%, with the best removal efficiency observed at an HRT of 10 h, a filling ratio of 20%, and an initial IBU concentration of 2 mg/L. Simultaneously, the IBU removal rate ranged from 25 to 92.7%, with the highest removal efficiency observed under the same HRT and filling ratio, albeit with an initial IBU concentration of 5 mg/L. An extension of HRT from 5 to 10 h significantly improved both COD and IBU removal. However, further extension from 10 to 15 h slightly enhanced the removal efficiency of COD and IBU, and even in some cases, removal efficiency decreased. Based on the obtained results, 20% of the filling ratio was chosen as the optimum state. Increasing the initial concentration of IBU from 2 to 5 mg/L generally improved COD and IBU removal, whereas an increase from 5 to 10 mg/L caused a decline in COD and IBU removal. This study also optimized the reactor's efficiency for COD and IBU removal by using response surface methodology (RSM) with independent variables of HRT, filling ratio, and initial IBU concentration. In this regard, the quadratic model was found to be significant. Utilizing the central composite design (CCD), the optimal operating parameters at an HRT of 10 h, a filling ratio of 21%, and an initial IBU concentration of 3 mg/L were pinpointed, achieving the highest COD and IBU removal efficiencies. The present study demonstrated that sponge-based MBBR stands out as a promising technology for COD and IBU removal.

Modelling impacts of climate change and anthropogenic activities on inflows and sediment loads of wetlands: case study of the Anzali wetland.

Understanding the effects of climate change and anthropogenic activities on the hydrogeomorpholgical parameters in wetlands ecosystems is vital for designing effective environmental protection and control protocols for these natural capitals. This study develops methodological approach to model the streamflow and sediment inputs to wetlands under the combined effects of climate and land use / land cover (LULC) changes using the Soil and Water Assessment Tool (SWAT). The precipitation and temperature data from General Circulation Models (GCMs) for different Shared Socio-economic Pathway (SSP) scenarios (i.e., SSP1-2.6, SSP2-4.5, and SSP5-8.5) are downscaled and bias-corrected with Euclidean distance method and quantile delta mapping (QDM) for the case of the Anzali wetland watershed (AWW) in Iran. The Land Change Modeler (LCM) is adopted to project the future LULC at the AWW. The results indicate that the precipitation and air temperature across the AWW will decrease and increase, respectively, under the SSP1-2.6, SSP2-4.5, and SSP5-8.5 scenarios. Streamflow and sediment loads will reduce under the sole influence of SSP2-4.5 and SSP5-8.5 climate scenarios. An increase in sediment load and inflow was observed under the combined effects of climate and LULC changes, this is mainly due to the projected increased deforestation and urbanization across the AWW. The findings suggest that the densely vegetated regions, mainly located in the zones with steep slope, significantly prevents large sediment load and high streamflow input to the AWW. Under the combined effects of the climate and LULC changes, by 2100, the projected total sediment input to the wetland will reach 22.66, 20.83, and 19.93 million tons under SSP1-2.6, SSP2-4.5, and SSP5-8.5 scenarios, respectively. The results highlight that without any robust environmental interventions, the large sediment inputs will significantly degrade the Anzali wetland ecosystem and partly-fill the wetland basin, resulting in resigning the wetland from the Montreux record list and the Ramsar Convention on Wetlands of International Importance.