Addressing Multi-User Interference in Vehicular Visible Light Communications: A Brief Survey and an Evaluation of Optical CDMA MAC Utilization in a Multi-Lane Scenario.

Visible Light Communications (VLC) are developing as an omnipresent solution for inter-vehicle communications. Based on intensive research efforts, the performance of vehicular VLC systems has significantly improved in terms of noise resilience, communication range, and latencies. Nevertheless, in order to be ready for deployment in real applications, solutions for Medium Access Control (MAC) are also required. In this context, this article provides an intensive evaluation of several optical CDMA MAC solutions and of their efficiency in mitigating the effect of Multiple User Interference (MUI). Intensive simulation results showed that an adequately designed MAC layer can significantly reduce the effects of MUI, ensuring an adequate Packet Delivery Ratio (PDR). The simulation results showed that based on the use of optical CDMA codes, the PDR can be improved from values as low as 20% up to values between 93.2% and 100%. Consequently, the results provided in this article show the high potential of optical CDMA MAC solutions in vehicular VLC applications, reconfirm the high potential of the VLC technology in inter-vehicle communications, and emphasize the need to further develop MAC solutions designed for such applications.

A Comprehensive Investigation on Multi-User Interference Effects in Vehicular Visible Light Communications.

Vehicular visible light communications (VLC) are considered a suitable technology for vehicular platooning applications. Nevertheless, this domain imposes strict performance requirements. Although numerous works have shown that VLC technology is compatible with platooning applications, existing studies are mainly focused on the physical layer performances, mostly ignoring the disruptive effects generated by neighboring vehicular VLC links. Nevertheless, the 5.9 GHz Dedicated Short Range Communications (DSRC) experience has shown that mutual interference can significantly affect the packed delivery ratio, pointing out that these effects should be analyzed for vehicular VLC networks as well. In this context, this article provides a comprehensive investigation focused on the effects of mutual interference generated by neighboring vehicle-to-vehicle (V2V) VLC links. Therefore, this work provides an intensive analytical investigation based on simulation and also on experimental results that demonstrate that although ignored, the influence of mutual interference is highly disruptive in vehicular VLC applications. Hence, it has been shown that without preventive measures, the Packet Delivery Ratio (PDR) can decrease below the imposed 90% limit for almost the entire service area. The results have also shown that although less aggressive, multi-user interference affects V2V links even in short-distance conditions. Therefore, this article has the merit of emphasizing a new challenge for vehicular VLC links and points out the importance of multiple-access techniques integration.

In-Vehicle Visible Light Communications Data Transmission System Using Optical Fiber Distributed Light: Implementation and Experimental Evaluation.

Visible light communications emerges as a promising wireless communication technology that has been found suitable for numerous indoor and outdoor applications. In this article, a new in-vehicle VLC system is designed, implemented, and experimentally evaluated. The purpose of this new system is to provide car passengers with optical wireless communications. The proposed system consists of a VLC emitter integrated into the vehicle's ambient lighting system and a mobile VLC receiver. Unlike any previous works, this article proposes a VLC emitter in which the light from a 3 W LED is distributed on a 2 square meter surface using 500 optical fibers whose main purpose is a decorative one. The proposed prototype has been implemented on a car and evaluated in relevant working conditions. The experimental evaluation of the proposed system has demonstrated the viability of the proposed concept and showed a data rate of 250 kb/s while providing a BER lower than 10-7. As far as we know, the proposed concept is totally new in the VLC literature, opening a new area of utilization for VLC technology: using VLC with optical fiber distributed light.

SenseJoy, a pluggable solution for assessing user behavior during powered wheelchair driving tasks.

BACKGROUND: The complex task of Electric Powered Wheelchairs (EPW) prescription relies mainly on personal experience and subjective observations despite standardized processes and protocols. The most informative measurements come from joystick monitoring, but recording direct joystick outputs require to disassemble the joystick. We propose a new solution called "SenseJoy" that is easy to plug on a joystick and is suitable to characterize the driver behavior by estimating the joystick command. METHODS: SenseJoy is a pluggable system embedded on EPW built with a 3D accelerometer and a 2D gyrometer placed within the joystick and another 3D accelerometer located at the basis of the joystick. Data is sampled at 39 Hz and processed offline. First, SenseJoy sensitivity is assessed on wheelchair driving tasks performed by a group of 8 drivers (31 ± 8 years old, including one driver with left hemiplegia, one with cerebral palsy) in a lab environment. Direct joystick measurements are compared with SenseJoy estimations in different driving exercises. A second group of 5 drivers is recorded in the ecological context of a rehabilitation center (41 ± 10 years old, with two tetraplegic drivers, one tetraplegic driver with cognitive disorder, one driver post-stroke, one driver with right hemiplegia). The measurements from all groups of drivers are evaluated with an unsupervised statistical analysis, to estimate driving profile clusters. RESULTS: The SenseJoy is able to measure the EPW joystick inclination angles with a resolution of 1.31% and 1.23% in backward/forward and left/right directions respectively. A statistical validation ensures that the classical joystick-based indicators are equivalent when acquired with the SenseJoy or with a direct joystick output connection. Using an unsupervised methodology, based on a similarity matrix between subjects, it is possible to characterize the driver profile from real data. CONCLUSION: SenseJoy is a pluggable system for assessing the joystick controls during EPW driving tasks. This system can be plugged on any EPW equipped with a joystick control interface. We demonstrate that it correctly estimates the performance indicators and it is able to characterize driving profile. The system is suitable and efficient to assist therapists in their recommendation, by providing objective measures with a fast installation process.

Experimental comparison of pulse-amplitude and spatial modulations for vehicle-to-vehicle visible light communication in platoon configurations.

Visible light communication (VLC) is an attractive complementary communication technology for vehicular applications such as platooning. Although data rates around 100 kbps are enough for crucial data transmission, it may be useful to reach a few megabits per second for other applications like networking. Such data rates can be reached by using appropriate modulations and clock rates. In this paper, three forms of pulse amplitude modulations (PAM) are compared in a vehicular context: on-off keying (OOK), PAM-4 and generalized space-shift keying (GSSK). A prototype based on off-the-shelf light-emitting diodes (LED) headlamps is used for static tests in straight line configuration, with an inter-vehicle distance up to 30 m, and curves of minimum radius 100 m and inter-vehicle distance of 10 m. These tests show that OOK and GSSK are the most interesting modulations for highway platooning applications. OOK provides indeed a good mobility while remaining simple to implement. A 1 Mbps link of BER below 10-6 is thus demonstrated. In GSSK, the data rate reaches 2 Mbps for an equivalent BER. These performances are obtained by using, in particular, two spatially distinct receivers, which limits strongly the complexity of GSSK decoding.

Catadioptric interfaces for designing VLC antennae.

This paper presents a model to design bi-aspherical catadioptric lenses with limited image diffraction. A first refractive Cartesian oval surface that does not introduce any spherical aberration is used. When total internal reflection occurs, this surface can also be simultaneously used as a mirror. The reflective characteristics of Cartesian ovals are also well described in this paper. The theoretical work described here can considerably reduce computing time in optical system design. This model is applied to examples of antennae design for visible light communications (VLC).

An integrated sample-in-answer-out microfluidic chip for rapid human identification by STR analysis.

A fully integrated microfluidic chip for human identification by short tandem repeat (STR) analysis that includes a unique enzymatic liquid preparation of the DNA, microliter non-contact PCR, and a polymer that allows a high-resolution separation within a compact microchip footprint has been developed. A heat-activated enzyme that digests biological materials is employed to generate the target yield of DNA from a buccal swab or FTA paper. The microfluidic architecture meters an aliquot of the liberated DNA and mixes it with the PCR reagents prior to non-contact IR-mediated PCR amplification. The products of PCR amplification are mixed with a sizing standard (ladder) and the 18-plex STR amplicons are separated in an effective length (Leff) of just 7 cm. The development, optimization and integration of each of these processes within the microfluidic chip are described. The device is able to generate genetic profiles in approximately 2 hours that match the profiles from the conventional processes performed using separate conventional instruments. Analysis is performed on a single plastic microchip with a size similar to that of a 96-well plate and only a few mm thick with no pretreatment of any of the functional domains. This is significant advancement in terms of ease of fabrication over glass microdevices or polymeric systems assembled from multiple components. Consequently, this fully integrated sample-in-answer-out microchip is an important step toward generation of a rapid micro-total analysis system for point-of-collection human identification based on genetic analysis.

DNA analysis using an integrated microchip for multiplex PCR amplification and electrophoresis for reference samples.

A system that automatically performs the PCR amplification and microchip electrophoretic (ME) separation for rapid forensic short tandem repeat (STR) forensic profiling in a single disposable plastic chip is demonstrated. The microchip subassays were optimized to deliver results comparable to conventional benchtop methods. The microchip process was accomplished in sub-90 min compared with >2.5 h for the conventional approach. An infrared laser with a noncontact temperature sensing system was optimized for a 45 min PCR compared with the conventional 90 min amplification time. The separation conditions were optimized using LPA-co-dihexylacrylamide block copolymers specifically designed for microchip separations to achieve accurate DNA size calling in an effective length of 7 cm in a plastic microchip. This effective separation length is less than half of other reports for integrated STR analysis and allows a compact, inexpensive microchip design. This separation quality was maintained when integrated with microchip PCR. Thirty samples were analyzed conventionally and then compared with data generated by the microfluidic chip system. The microfluidic system allele calling was 100% concordant with the conventional process. This study also investigated allelic ladder consistency over time. The PCR-ME genetic profiles were analyzed using binning palettes generated from two sets of allelic ladders run three and six months apart. Using these binning palettes, no allele calling errors were detected in the 30 samples demonstrating that a microfluidic platform can be highly consistent over long periods of time.