Methanol Oxidation at Platinum Coated Black Titania Nanotubes and Titanium Felt Electrodes.

Optimized Pt-based methanol oxidation reaction (MOR) anodes are essential for commercial direct methanol fuel cells (DMFCs) and methanol electrolyzers for hydrogen production. High surface area Ti supports are known to increase Pt catalytic activity and utilization. Pt has been deposited on black titania nanotubes (bTNTs), Ti felts and, for comparison, Ti foils by a galvanic deposition process, whereby Pt(IV) from a chloroplatinate solution is spontaneously reduced to metallic Pt (at 65 °C) onto chemically reduced (by CaH2) TNTs (resulting in bTNTs), chemically etched (HCl + NaF) Ti felts and grinded Ti foils. All Pt/Ti-based electrodes prepared by this method showed enhanced intrinsic catalytic activity towards MOR when compared to Pt and other Pt/Ti-based catalysts. The very high/high mass specific activity of Pt/bTNTs (ca 700 mA mgPt-1 at the voltammetric peak of 5 mV s-1 in 0.5 M MeOH) and of Pt/Ti-felt (ca 60 mA mgPt-1, accordingly) make these electrodes good candidates for MOR anodes and/or reactive Gas Diffusion Layer Electrodes (GDLEs) in DMFCs and/or methanol electrolysis cells.

Galvanic Restructuring of Exsolved Nanoparticles for Plasmonic and Electrocatalytic Energy Conversion.

There is a growing need to control and tune nanoparticles (NPs) to increase their stability and effectiveness, especially for photo- and electrochemical energy conversion applications. Exsolved particles are well anchored and can be re-shaped without changing their initial location and structural arrangement. However, this usually involves lengthy treatments and use of toxic gases. Here, the galvanic replacement/deposition method is used, which is simpler, safer, and leads to a wealth of new hybrid nanostructures with a higher degree of tailorability. The produced NiAu bimetallic nanostructures supported on SrTiO3 display exceptional activity in plasmon-assisted photoelectrochemical (PEC) water oxidation reactions. In situ scanning transmission electron microscopy is used to visualize the structural evolution of the plasmonic bimetallic structures, while theoretical simulations provide mechanistic insight and correlate the surface plasmon resonance effects with structural features and enhanced PEC performance. The versatility of this concept in shifting catalytic modes to the hydrogen evolution reaction is demonstrated by preparing hybrid NiPt bimetallic NPs of low Pt loadings on highly reduced SrTiO3 supports. This powerful methodology enables the design of supported bimetallic nanomaterials with tunable morphology and catalytic functionalities through minimal engineering.

Water Vapor Photoelectrolysis in a Solid-State Photoelectrochemical Cell with TiO2 Nanotubes Loaded with CdS and CdSe Nanoparticles.

In this study, polyol-made CdS and CdSe crystalline nanoparticles (NPs) are loaded by impregnation on TiO2 nanotube arrays (TNTAs) for solar-simulated light-driven photoelectrochemical (PEC) water vapor splitting. For the first time, we introduce a safe way to utilize toxic, yet efficient photocatalysts by integration in solid-state PEC (SSPEC) cells. The enabling features of SSPEC cells are the surface protonic conduction mechanism on TiO2 and the use of polymeric electrolytes, such as Nafion instead of liquid ones, for operation with gaseous reactants, like water vapor from ambient humidity. Herein, we studied the effects of both the operating conditions in gaseous ambient atmospheres and the surface modifications of TNTAs-based photoanodes with well-crystallized CdS and CdSe NPs. We showed 3.6 and 2.5 times increase in the photocurrent density of defective TNTAs modified with CdS and CdSe, respectively, compared to the pristine TNTAs. Electrochemical impedance spectroscopy and structural characterizations attributed the improved performance to the higher conductivity induced by intrinsic defects as well as to the enhanced electron/hole separation at the TiO2/CdS heterojunction under gaseous operating conditions. The SSPEC cells were evaluated by cycling between high relative humidity (RH) (80%) and low RH levels (40%), providing direct evidence of the effect of RH and, in turn, adsorbed water, on the cell performance. Online mass spectrometry indicated the corresponding difference in the H2 production rate. In addition, a complete restoration of the SSPEC cell performance from low to high RH levels was also achieved. The presented system can be employed in off-grid, water depleted, and air-polluted areas for the production of hydrogen from renewable energy and provides a solution for the safe use of toxic, yet efficient photocatalysts.

Galvanic Deposition of Pt Nanoparticles on Black TiO2 Nanotubes for Hydrogen Evolving Cathodes.

A galvanic deposition method for the in-situ formation of Pt nanoparticles (NPs) on top and inner surfaces of high-aspect-ratio black TiO2 -nanotube electrodes (bTNTs) for true utilization of their total surface area has been developed. Density functional theory calculations indicated that the deposition of Pt NPs was favored on bTNTs with a preferred [004] orientation and a deposition mechanism occurring via oxygen vacancies, where electrons were localized. High-resolution transmission electron microscopy images revealed a graded deposition of Pt NPs with an average diameter of around 2.5 nm along the complete nanotube axis (length/pore diameter of 130 : 1). Hydrogen evolution reaction (HER) studies in acidic electrolytes showed comparable results to bulk Pt (per geometric area) and Pt/C commercial catalysts (per mg of Pt). The presented novel HER cathodes of minimal engineering and low noble metal loadings (µg cm-2 range) achieved low Tafel slopes (30-34 mV dec-1 ) and high stability in acidic conditions. This study provides important insights for the in-situ formation and deposition of NPs in high-aspect-ratio structures for energy applications.

Double Perovskite Cobaltites Integrated in a Monolithic and Noble Metal-Free Photoelectrochemical Device for Efficient Water Splitting.

Water photoelectrolysis has the potential to produce renewable hydrogen fuel, therefore addressing the intermittent nature of sunlight. Herein, a monolithic, photovoltaic (PV)-assisted water electrolysis device of minimal engineering and of low (in the µg range) noble-metal-free catalysts loading is presented for unassisted water splitting in alkaline media. An efficient double perovskite cobaltite catalyst, originally developed for high-temperature proton-conducting ceramic electrolyzers, possesses high activity for the oxygen evolution reaction in alkaline media at room temperatures too. Ba1-xGd1-yLax+yCo2O6-δ (BGLC) is combined with a NiMo cathode, and a solar-to-hydrogen efficiency of 6.6% in 1.0 M NaOH, under 1 sun simulated illumination for 71 h, is demonstrated. This work highlights how readily available earth-abundant materials and established PV methods can achieve high performance and stable and monolithic photoelectrolysis devices with potential for full-scale applications.

A highly efficient electrocatalyst based on double perovskite cobaltites with immense intrinsic catalytic activity for water oxidation.

High temperature electrocatalysts based on double perovskite cobaltites that are typically employed in proton ceramic fuel cells and electrolyzers are exploited here for room temperature water oxidation. The double perovskites are assessed by the RctCdl product and we show that their intrinsic catalytic activities exceed that of IrO2.

Composite Membranes for High Temperature PEM Fuel Cells and Electrolysers: A Critical Review.

Polymer electrolyte membrane (PEM) fuel cells and electrolysers offer efficient use and production of hydrogen for emission-free transport and sustainable energy systems. Perfluorosulfonic acid (PFSA) membranes like Nafion® and Aquivion® are the state-of-the-art PEMs, but there is a need to increase the operating temperature to improve mass transport, avoid catalyst poisoning and electrode flooding, increase efficiency, and reduce the cost and complexity of the system. However, PSFAs-based membranes exhibit lower mechanical and chemical stability, as well as proton conductivity at lower relative humidities and temperatures above 80 °C. One approach to sustain performance is to introduce inorganic fillers and improve water retention due to their hydrophilicity. Alternatively, polymers where protons are not conducted as hydrated H3O+ ions through liquid-like water channels as in the PSFAs, but as free protons (H+) via Brønsted acid sites on the polymer backbone, can be developed. Polybenzimidazole (PBI) and sulfonated polyetheretherketone (SPEEK) are such materials, but need considerable acid doping. Different composites are being investigated to solve some of the accompanying problems and reach sufficient conductivities. Herein, we critically discuss a few representative investigations of composite PEMs and evaluate their significance. Moreover, we present advances in introducing electronic conductivity in the polymer binder in the catalyst layers.

Recent Advances in the Use of Black TiO2 for Production of Hydrogen and Other Solar Fuels.

Black TiO2 has emerged as one of the most promising photocatalysts recently discovered. The reason behind its catalytic activity is considered to be due to the presence of defects and Ti3+ species at the surface of black TiO2 nanostructures, which are crucial for its diverse applications. Moreover, disordered/crystalline surface layers and bulk regions have been identified and appear to influence the intrinsic properties of the material. Here, we present the latest studies on the use of black TiO2 for metal free hydrogen production, as well as for CO2 photoreduction and N2 photofixation. After highlighting the structure/property relations, we conclude with some critical questions and suggest further topics of research in order to better understand the underlying mechanisms of light absorption in black TiO2 , especially towards solar fuels production.

Ta3N5/Co(OH)x composites as photocatalysts for photoelectrochemical water splitting.

Ta3N5 nanotubes (NTs) were obtained from nitridation of Ta2O5 NTs, which were grown directly on Ta foil through a 2-step anodization procedure. With Co(OH)x decoration, a photocurrent density as high as 2.3 mA cm-2 (1.23 V vs. NHE) was reached under AM1.5G simulated solar light; however, the electrode suffered from photocorrosion. More stable photoelectrochemical (PEC) performance was achieved by first loading Co(OH)x, followed by loading cobalt phosphate (Co-Pi) as double co-catalysts. The Co(OH)x/Co-Pi double co-catalysts may act as a hole storage layer that slows down the photocorrosion caused by the accumulated holes on the surface of the electrode. A "waggling" appearance close to the "mouth" of Ta2O5 NTs was observed, and may indicate structural instability of the "mouth" region, which breaks into segments after nitridation and forms a top layer of broken Ta3N5 NTs. A unique mesoporous structure of the walls of the Ta3N5 NTs, which is reported here the first time, is also a result of the nitridation process. We believe that the mesoporous structure makes it difficult for the nanotubes to be fully covered by the co-catalyst layer, hence rationalizing the remaining degradation by photocorrosion.

Solid-state photoelectrochemical cell with TiO2 nanotubes for water splitting.

We have fabricated and tested a photoelectrochemical (PEC) cell where the aqueous electrolyte has been replaced by a proton conducting hydrated Nafion® polymer membrane. The membrane was sandwiched between a TiO2-based photoanode and a Pt/C-based cathode. The performance was tested with two types of photoanode electrodes, a thermally prepared TiO2 film on Ti foil (T-TiO2) and a nanostructured TiO2 films in the form of highly ordered nanotubes (TNT) of different lengths. Firstly, photovoltammetry experiments were conducted under asymmetric conditions, where the anode was immersed in deionized water, while the cathode was kept in ambient air. The results showed a high incident photon-to-current efficiency (IPCE) of 19% under unassisted conditions (short-circuit, 0 V vs. cathode) with short TNT (ca. 1 µm) under 4 mW cm-2 illumination with UV-A rich light. Secondly, the deionized water was replaced by 0.5 M Na2SO4 and now the performance was higher with longer nanotubes, assigned to increased ionic conductivity inside the tubes. An unassisted (0 V) IPCE of 33% was achieved with nanotubes of ca. 8 µm. The presented solid-state PEC cell minimizes the electrode distance and volume of the device, and provides a way towards compact practical applications in solar water splitting.