Precisely Controlling Polymer Acceptors with Weak Intramolecular Charge Transfer Effect and Superior Coplanarity for Efficient Indoor All-Polymer Solar Cells with over 27% Efficiency.

Indoor photovoltaics (IPVs) are garnering increasing attention from both the academic and industrial communities due to the pressing demand of the ecosystem of Internet-of-Things. All-polymer solar cells (all-PSCs), emerging as a sub-type of organic photovoltaics, with the merits of great film-forming properties, remarkable morphological and light stability, hold great promise to simultaneously achieve high efficiency and long-term operation in IPV's application. However, the dearth of polymer acceptors with medium-bandgap has impeded the rapid development of indoor all-PSCs. Herein, a highly efficient medium-bandgap polymer acceptor (PYFO-V) is reported through the synergistic effects of side chain engineering and linkage modulation and applied for indoor all-PSCs operation. As a result, the PM6:PYFO-V-based indoor all-PSC yields the highest efficiency of 27.1% under LED light condition, marking the highest value for reported binary indoor all-PSCs to date. More importantly, the blade-coated devices using non-halogenated solvent (o-xylene) maintain an efficiency of over 23%, demonstrating the potential for industry-scale fabrication. This work not only highlights the importance of fine-tuning intramolecular charge transfer effect and intrachain coplanarity in developing high-performance medium-bandgap polymer acceptors but also provides a highly efficient strategy for indoor all-PSC application.

Sterically Controlled Synthesis of Amine-Free CsPbBr3 Nanoplatelets for Stable, Pure-Blue Light Emission.

Metal halide perovskite nanoplatelets (NPLs) have demonstrated excellent optical properties for light-emitting applications and achieved tunable blue luminescence through thickness control. However, their translation into electronic devices has lagged behind due to poor colloidal and film stability. The main reason for this is the deprotonation of their surface-capped ammonium passivating ligands, resulting in NPL aggregation. Here we report the first facile synthesis of amine-free pure-blue CsPbBr3 NPLs with outstanding thermal and light stability. This is achieved by utilizing an amine-free phosphine oxide route with a surface capping molecule exhibiting large steric hindrance to prevent NPL aggregation. Two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy suggests slower ligand exchange in amine-free NPLs compared to the conventional NPLs, which can be attributed to the strong binding strength of the designated ligand. Consequently, the amine-free NPLs exhibited superior stability against radiation, heat and moisture. We further demonstrate the importance of acid-base equilibrium in this amine-free synthesis route. Through solvent neutralization and passivation with various alkali carbonates, the resulting NPLs attained near-unity photoluminescence quantum yield (PLQY) and pure blue emission.

Carrier Dynamics of Efficient Triplet Harvesting in AgBiS2 /Pentacene Singlet Fission Solar Cells.

Singlet fission is a process by which an organic semiconductor is able to generate two triplet excitons from a single photon. If charges from the triplets can be successfully harvested without heavy losses in energy, then this process can enable a single-junction solar cell to surpass the Shockley-Queisser limit. While singlet fission processes are commonly observed in several materials, harvesting the resulting triplets is difficult and has been demonstrated with only a few transport materials. Here, transient absorption spectroscopy is used to investigate singlet fission and carrier transfer processes at the AgBiS2 /pentacene (AgBiS2 /Pc) heterojunction. The successful transfer of triplets from pentacene to AgBiS2 and the transfer of holes from AgBiS2 to pentacene is observed. Further singlet fission in pentacene by modifying the crystallinity of the pentacene layer and have fabricated the first singlet fission AgBiS2 /Pc solar cell is enhanced. Singlet fission devices exhibit higher external quantum efficiency compared with the control devices, and thus demonstrating the significant contribution of charges from the singlet fission process.

Solution-Processed, Inverted AgBiS2 Nanocrystal Solar Cells.

AgBiS2 nanocrystals are a promising nontoxic alternative to PbS, CsPbI3, and CdS quantum dots for solution-fabricated nanocrystal photovoltaics. In this work, we fabricated the first inverted (p-i-n) structure AgBiS2 nanocrystal solar cells. We selected spray-coated NiO as the hole-transporting material and used PCBM/BCP as the electron-transporting material. Combining transient photocurrent and photovoltage measurements with femtosecond transient absorption spectroscopy, we investigated the charge collection process on metal oxide/AgBiS2 interfaces and demonstrated that the NiO/AgBiS2 NC junction in the p-i-n configuration is more efficient for charge carrier collection. The fabricated p-i-n solar cells exhibited a 4.3% power conversion efficiency (PCE), which was higher than that of conventional n-i-p solar cells fabricated using the same sample. Additionally, inverted devices showed an ultrahigh short-circuit current (JSC) over 20.7 mA cm-2 and 0.38 V open-circuit voltage (VOC), suggesting their potential for further improvements in efficiency and, eventually, for large-scale production.

Optically Clear Films of Formamidinium Lead Bromide Perovskite for Wide-Band-Gap, Solution-Processed, Semitransparent Solar Cells.

Solvent engineering and antisolvent methods have been used extensively to achieve high-quality, homogeneous, and crystalline perovskite thin films. Usually, highly concentrated (>1.1 M) precursor solutions are used to achieve the maximum power conversion efficiency (PCE), and most fabrication studies focus on iodide-based metal halide perovskites (MHPs). However, high concentrations of precursors are not suitable for semitransparent (ST) MHP solar cells (STPSCs), which require thinner films to achieve a high average visible transmittance (AVT). The deposition of high-quality perovskites with variable concentrations in a one-step method is challenging due to the complexity of the antisolvent crystallization process. Here, we have developed an in situ technique based on photoluminescence (PL) measurements to identify the optimum delay time for antisolvent crystallization in formamidinium lead bromide (FAPbBr3). By monitoring the in situ PL, the nucleation, crystal growth, and early perovskite formation phases are easily identified for a range of concentrations. Subsequently, we fabricated opaque and ST solar cells with optically clear, ST perovskite films formed from precursors with varying concentrations. These all-solution-processed STPSCs achieved AVTs of up to 35.6, 42.5, and 49.2%, with the corresponding PCEs of 5.71, 3.25, and 1.86% in p-i-n type, FAPbBr3 perovskite solar cells with transparent Ag nanowire electrodes. These devices show good stability over several weeks and an impressive Voc as high as 1.24 V for STPSCs and 1.38 V for opaque cells produced with a thick Ag electrode. This work demonstrates the potential use of in situ spectroscopy to tailor the film growth of halide perovskites with varying concentrations and the feasibility of using wide-band-gap perovskites for ST solar cells with exceptional clarity and higher Voc.

Broadband molecular sensing with a tapered spoof plasmon waveguide.

Unambiguous identification of low concentration chemical mixtures can be performed by broadband enhanced infrared absorption (BEIRA). Here we propose and numerically study a corrugated parallel plate waveguide (CPPW) with gradient grooves which is capable of directly converting transmission modes to surface plasmon modes and could hence serve as a powerful chemical sensor. Such a waveguide can be designed to exhibit a wide pass band covering an extended portion of a molecule absorption spectrum. Broadband sensing of toluene and ethanol thin layers is demonstrated by calculating the transmission coefficient of the waveguide and is shown to correspond exactly to their infrared spectra. In addition, the upper limit and the lower limit of the bandgap are mainly dependent on the minimum and maximum groove height, respectively, which provide an effective way of tuning the working frequency of the device in order to support surface plasmon modes within a desired frequency range according to a specific application.