Performance, kinetic characteristics and bacterial community of short-cut nitrification and denitrification system at different ferrous ion conditions.

In order to explore the operation performance, kinetic characteristics and bacterial community of the short-cut nitrification and denitrification (SND) system, the SND system with pre-cultured short cut nitrification and denitrification sludge was established and operated under different ferrous ion (Fe (II)) conditions. Experimental results showed that the average NH4+-N removal efficiency (ARE) of SND system was 97.3% on Day 5 and maintained a high level of 94.9% ± 1.3% for a long operation period. When the influent Fe(II) concentration increased from 2.3 to 7.3 mg L-1, the sedimentation performance, sludge concentration and organic matter removal performance were improved. However, higher Fe(II) of 12.3 mg L-1 decreased the removal of nitrogen and CODCr with the relative abundance (RA) of Proteobacteria and Bacteroidetes decreased to 30.28% and 19.41%, respectively. Proteobacteria, Bacteroidetes and Firmicutes were the dominant phyla in SND system. Higher Fe(II) level of 12.3 mg L-1 increase the RA of denitrifying genus Trichococcus (33.93%), and the denitrifying genus Thauera and Tolumonas dominant at Fe(II) level of no more than 7.3 mg L-1.

Enhancing lipid production and sedimentation of Chlorella pyrenoidosa in saline wastewater through the addition of agricultural phytohormones.

In this study, the effect of external agricultural phytohormones (mixed phytohormones) addition (1.0, 5.0, 10.0, and 20.0 mg L-1) on the growth performance, lipid productivity, and sedimentation efficiency of Chlorella pyrenoidosa cultivated in saline wastewater was investigated. Among the different concentrations evaluated, the highest biomass (1.00 g L-1) and lipid productivity (11.11 mg L-1 d-1) of microalgae were obtained at 10.0 mg L-1 agricultural phytohormones addition. Moreover, exogenous agricultural phytohormones also improved the sedimentation performance of C. pyrenoidosa, which was conducive to the harvest of microalgae resources, and the improvement of sedimentation performance was positively correlated with the amount of agricultural phytohormones used. The promotion of extracellular polymeric substances synthesis by phytohormones in microalgal cells could be considered as the reason for its promotion of microalgal sedimentation. Transcriptome analysis revealed that the addition of phytohormones upregulated the expression of genes related to the mitogen-activated protein kinase (MAPK)-mediated phytohormone signaling pathway and lipid synthesis, thereby improving salinity tolerance and lipid production in C. pyrenoidosa. Overall, agricultural phytohormones provide an effective and inexpensive strategy for increasing the lipid productivity and sedimentation efficiency of microalgae cultured in saline wastewater.

Enhanced chlorobenzene removal by internal magnetic field through initial cell adhesion and biofilm formation.

Magnetic fields (MF) have been proven efficient in bioaugmentation, and the internal MFs have become competitive because they require no configuration, despite their application in waste gas treatment remaining largely unexplored. In this study, we firstly developed an intensity-regulable bioaugmentation with internal MF for gaseous chlorobenzene (CB) treatment with modified packing in batch bioreactors, and the elimination capacity increased by up to 26%, surpassing that of the external MF. Additionally, the microbial affinity to CB and the packing surface was enhanced, which was correlated with the ninefold increased secreted ratio of proteins/polysaccharides, 43% promoted cell surface hydrophobicity, and half reduced zeta potential. Furthermore, the dehydrogenase content was promoted over 3 times, and CB removal steadily increased with the rising intensity indicating enhanced biofilm activity and reduced CB bioimpedance; this was further supported by kinetic analysis, which resulted in improved cell adhesive ability and biological utilisation of CB. The results introduced a novel concept of adjustable magnetic bioaugmentation and provided technical support for industrial waste gas treatments. KEY POINTS: • Regulable magnetic bioaugmentation was developed to promote 26% chlorobenzene removal • Chlorobenzene mineralisation was enhanced under the magnetic field • Microbial adhesion was promoted through weakening repulsive forces.

Supplementation of exogenous phytohormones for enhancing the removal of sulfamethoxazole and the simultaneous accumulation of lipid by Chlorella vulgaris.

In this study, the phytohormone gibberellins (GAs) were used to enhance sulfamethoxazole (SMX) removal and lipid accumulation in the microalgae Chlorella vulgaris. At the concentration of 50 mg/L GAs, the SMX removal achieved by C. vulgaris was 91.8 % while the lipid productivity of microalga was at 11.05 mg/L d-1, which were much higher than that without GAs (3.5 % for SMX removal and 0.52 mg/L d-1 for lipid productivity). Supplementation of GAs enhanced the expression of antioxidase-related genes in C. vulgaris as a direct response towards the toxicity of SMX. In addition, GAs increased lipid production of C. vulgaris by up-regulating the expression of genes related to carbon cycle of microalgal cells. In summary, exogenous GAs promoted the stress tolerance and lipid accumulation of microalgae at the same time, which is conducive to improving the economic benefits of microalgae-based antibiotics removal as well as biofuel production potential.

Integrated culture and harvest systems for improved microalgal biomass production and wastewater treatment.

Microalgae cultivation in wastewater has received much attention as an environmentally sustainable approach. However, commercial application of this technique is challenging due to the low biomass output and high harvesting costs. Recently, integrated culture and harvest systems including microalgae biofilm, membrane photobioreactor, microalgae-fungi co-culture, microalgae-activated sludge co-culture, and microalgae auto-flocculation have been explored for efficiently coupling microalgal biomass production with wastewater purification. In such systems, the cultivation of microalgae and the separation of algal cells from wastewater are performed in the same reactor, enabling microalgae grown in the cultivation system to reach higher concentration, thus greatly improving the efficiency of biomass production and wastewater purification. Additionally, the design of such innovative systems also allows for microalgae cells to be harvested more efficiently. This review summarizes the mechanisms, characteristics, applications, and development trends of the various integrated systems and discusses their potential for broad applications, which worth further research.

Mechanisms and application of microalgae on removing emerging contaminants from wastewater: A review.

This study reviews the development of the ability of microalgae to remove emerging contaminants (ECs) from wastewater. Contaminant removal by microalgae-based systems (MBSs) includes biosorption, bioaccumulation, biodegradation, photolysis, hydrolysis, and volatilization. Usually, the existence of ECs can inhibit microalgae growth and reduce their removal ability. Therefore, three methods (acclimation, co-metabolism, and algal-bacterial consortia) are proposed in this paper to improve the removal performance of ECs by microalgae. Finally, due to the high removal performance of contaminants from wastewater by algal-bacterial consortia systems, three kinds of algal-bacterial consortia applications (algal-bacterial activatedsludge, algal-bacterial biofilm reactor, and algal-bacterial constructed wetland system) are recommended in this paper. These applications are promising for ECs removal. But most of them are still in their infancy, and limited research has been conducted on operational mechanisms and removal processes. Extra research is needed to clarify the applicability and cost-effectiveness of hybrid processes.

Airlift two-phase partitioning bioreactor for dichloromethane removal: Silicone rubber stimulated biodegradation and its auto-circulation.

Solid non-aqueous phases (NAPs), such as silicone rubber, have been used extensively to improve the removal of volatile organic compounds (VOCs). However, the removal of VOCs is difficult to be further improved because the poor understanding of the mass transfer and reaction processes. Further, the conventional reactors were either complicated or uneconomical. In view of this, herein, an airlift bioreactor with silicone rubber was designed and investigated for dichloromethane (DCM) treatment. The removal efficiency of Reactor 1 (with silicone rubber) was significantly higher than that of Reactor 2 (without silicone rubber), with corresponding higher chloride ion and CO2 production. It was found that Reactor 1 achieved a much better DCM shock tolerance capability and biomass stability than Reactor 2. Silicone rubber not only enhanced the mass transfer in terms of both gas/liquid and gas/microbial phases, but also decreased the toxicity of DCM to microorganisms. Noteworthily, despite the identical inoculum used, the relative abundance of potential DCM-degrading bacteria in Reactor 1 (91.2%) was much higher than that in Reactor 2 (24.3%) at 216 h. Additionally, the silicone rubber could be automatically circulated in the airlift bioreactor due to the driven effect of the airflow, resulting in a significant reduction of energy consumption.

Promoting effect of plant hormone gibberellin on co-metabolism of sulfamethoxazole by microalgae Chlorella pyrenoidosa.

In this study, sodium acetate (NaAC) as a co-substrate effectively promoted the metabolism of sulfamethoxazole (SMX) by microalgae Chlorella pyrenoidosa. In the cultivation supplied with 5.0 and 10.0 g L-1 NaAC, 51.1% and 61.2% SMX was removed, respectively. On this basis, the improvement effect of plant hormone gibberellin (GA3) on SMX removal by 5 g L-1 NaAC supplied as co-substrate was further investigated. The results showed that biodegradation played decisive role in the removal of SMX. As a plant hormone, GA3 effectively improved the co-metabolic removal efficiency of SMX by C. pyrenoidosa. Especially when GA3 dosage reached 10.0 and 50.0 mg L-1, C. pyrenoidosa showed a very high SMX removal rate of 83.5% and 95.3%, respectively. Transcriptome analysis showed that GA3 promoted the removal of SMX by C. pyrenoidosa was the result of the combined action of exogenous and endogenous plant hormones.

Interaction of tetrahydrofuran and methyl tert-butyl ether in waste gas treatment by a biotrickling filter bioaugmented with Piscinibacter caeni MQ-18 and Pseudomonas oleovorans DT4.

Bioaugmented biotrickling filter (BTF) seeded with Piscinibacter caeni MQ-18, Pseudomonas oleovorans DT4, and activated sludge was established to investigate the treatment performance and biodegradation kinetics of the gaseous mixtures of tetrahydrofuran (THF) and methyl tert-butyl ether (MTBE). Experimental results showed an enhanced startup performance with a startup period of 9 d in bioaugmented BTF (25 d in control BTF seeded with activated sludge). The interaction parameter I2,1 of control (7.462) and bioaugmented BTF (3.267) obtained by the elimination capacity-sum kinetics with interaction parameter (EC-SKIP) model indicated that THF has a stronger inhibition of MTBE biodegradation in the control BTF than in the bioaugmented BTF. Similarly, the self-inhibition EC-SKIP model quantified the positive effects of MTBE on THF biodegradation, as well as the negative effects of THF on MTBE biodegradation and the self-inhibition of MTBE and THF. Metabolic intermediate analysis, real-time quantitative polymerase chain reaction, biofilm-biomass determination, and high-throughput sequencing revealed the possible mechanism of the enhanced treatment performance and biodegradation interactions of MTBE and THF.

Improving sedimentation and lipid production of microalgae in the photobioreactor using saline wastewater.

Saline wastewater was used in this study to culture freshwater microalgae Chlorella pyrenoidosa in sequencing batch photobioreactor to improve the sedimentation and lipid production of algal cells. Influent salinity of 0.5% or above effectively promoted the sedimentation of microalgae in the settling stage of photobioreactor, and greatly reduced the algal biomass in effluent. The mechanism of the saline wastewater in improving the sedimentation of microalgae included decreasing zeta potential, increasing cell particle size and promoting extracellular polymeric substances synthesis, which varied with influent salinity. Saline wastewater also promoted the lipid accumulation in microalgae. Lipid content of microalgae increased with increasing influent salinity. However, the growth of microalgae was greatly inhibited at the influent salinity of 2.0% and 3.0%. Therefore, the PBR with influent salinity of 1.0% achieved the highest productivity of microalgae lipid. The saturation of fatty acids of microalgae gradually increased with increasing influent salinity.

Effects of a cold plasma-assisted shrimp processing chain on biochemical and sensory quality alterations in Pacific white shrimps (Penaeus vannamei).

In this paper, remodeling the shrimp processing chain and the effects of the transformation on the biochemical and sensory qualities of fresh Pacific white shrimp (Penaeus vannamei) under refrigeration storage were investigated. In the proposed model, a dielectric barrier discharge atmospheric cold plasma pretreatment step using a 60 kV source for 60, 90, 120, and 150 s was introduced after the first and second wash followed by refrigeration storage at 4 ± 1 °C for 12 days. Chemical, biochemical, and sensory attributes of the shrimp were monitored and compared with those of shrimp processed through the traditional method without atmospheric cold plasma pretreatment (control). Incorporating minimal dielectric barrier discharge atmospheric cold plasma pretreatment step had more desirable quality outcomes characterized by low malondialdehyde concentration, low volatile nitrogen products content, and comparable proximate composition. Texture, pH, and color were remarkably retained at 120 and 150 s of atmospheric cold plasma pretreatment and protein degradation was negligible up to 90 s than at 120 and 150 s of pretreatment. We conclude that remodeling the shrimp processing chain through incorporating minimal dielectric barrier discharge atmospheric cold plasma pretreatment with key considerations on operation parameters can maximize the beneficial biochemical and sensory quality outcomes while minimizing the negative impacts associated with traditional shrimp processing.

Mixotrophic cultivation of microalgae coupled with anaerobic hydrolysis for sustainable treatment of municipal wastewater in a hybrid system of anaerobic membrane bioreactor and membrane photobioreactor.

This study investigated the possibility of coupling anaerobic hydrolysis in an anaerobic membrane bioreactor (AnMBR) with mixotrophic microalgae cultivation in a membrane photobioreactor (MPBR) for the sustainable treatment of municipal wastewater. Using the hydrolyzed wastewater discharged from AnMBR, Chlorella pyrenoidosa in MPBR grew in a mixotrophic mode and realized rapid growth. During the stable operation, MPBR achieved average carbon capture rate of 42.82 mg L-1 d-1 and algal lipid production rate of 19.66 mg L-1 d-1. The average reduction in TN, TP, and TOC during stable operation was 96.7%, 98.0%, and 95.9%, respectively. Mass balance analysis showed that the overall system captured 14.76 mg of carbon from the atmosphere per liter of wastewater treated. Therefore, this AnMBR-MPBR hybrid system simultaneously realized advanced treatment of municipal wastewater, efficient production of algal lipid, and carbon capture from atmosphere, and thus has a good potential in the sustainable treatment of municipal wastewater.

Enhanced biodegradation of n-hexane in a two-phase partitioning bioreactor inoculated with Pseudomonas mendocina NX-1 under chitosan stimulation.

Two-phase partitioning bioreactors (TPPBs) have been extensively used for volatile organic compounds (VOCs) removal. To date, most studies have focused on improving the mass transfer of gas phases/non-aqueous phases (NAPs)/aqueous phases, whereas the NAP/biological phases and gas/biological phases transfer has been neglected. Herein, chitosan was introduced into a TPPB to increase cell surface hydrophobicity (CSH) and improve the n-hexane mass transfer. The performance and stability of the TPPB with chitosan for n-hexane biodegradation were investigated, and it was found out that the TPPB with chitosan achieved maximum removal efficiency and elimination capacity of 80.6% and 26.5 g m-3 h-1, thereby reaching much higher values than those obtained without chitosan (61.3% and 15.2 g m-3 h-1). Chitosan not only obvio usly increased cell surface hydrophobicity and cell dry biomass on the surface of silicone oil, but might also allow hydrophobic cells in aqueous phases to directly capture and biodegrade n-hexane, resulting in an obvious improvement of mass transfer from the gas phase to biomass. Stability enhancement was another attractive advantage from chitosan addition. This study might provide a new strategy for the development of TPPB in the hydrophobic VOCs treatment.

Removal of gaseous tetrahydrofuran via a three-phase airlift bioreactor loaded with immobilized cells of GFP-tagged Pseudomonas oleovorans GDT4.

Tetrahydrofuran (THF) is a common highly toxic cyclic aliphatic ether that frequently exists in waste gases. Removal of gaseous THF is a serious issue with important environmental ramifications. A novel three-phase airlift bioreactor (TPAB) loaded with immobilized cells was developed for efficient THF removal from gas streams. An effective THF-degrading transformant, Pseudomonas oleovorans GDT4, which contains the pTn-Mod-OTc-gfp plasmid and was tagged with a green fluorescent protein (GFP), was constructed. Continuous treatment of THF-containing waste gases was succeeded by the GFP-labelled cells immobilized with calcium alginate and activated carbon fiber in the TPAB for 60 days with >90% removal efficiency. The number of fluorescent cells in the beads reached 1.7 × 1011 cells·g-1 of bead on day 10, accounting for 83.3% of the total number of cells. The amount further increased to 3.0 × 1011 cells·g-1 of bead on day 40. However, it decreased to 2.5 × 1011 cells·g-1 of bead with a substantial increase in biomass in the liquid because of cell leakage and hydraulic shock. PCR-DGGE revealed that P. oleovorans was the dominant microorganism throughout the entire operation. The maximum elimination capacity was affected by empty bed residence time (EBRT). The capacity was only 25.9 g m-3·h-1 at EBRT of 80 s, whereas it reached 37.8 g m-3·h-1 at EBRT of 140 s. This work provides an alternative method for full-scale removal of gaseous THF and presents a useful tool for determining the biomass of a specific degrader in immobilized beads.

Enhancing Chlorobenzene Biodegradation by Delftia tsuruhatensis Using a Water-Silicone Oil Biphasic System.

In this study, a water-silicone oil biphasic system was developed to enhance the biodegradation of monochlorobenzene (CB) by Delftia tsuruhatensis LW26. Compared to the single phase, the biphasic system with a suitable silicone oil fraction (v/v) of 20% allowed a 2.5-fold increase in the maximum tolerated CB concentration. The CB inhibition on D. tsuruhatensis LW26 was reduced in the presence of silicone oil, and the electron transport system activity was maintained at high levels even under high CB stress. Adhesion of cells to the water-oil interface at the water side was observed using confocal laser scanning microscopy. Nearly 75% of cells accumulated on the interface, implying that another interfacial substrate uptake pathway prevailed besides that initiated by cells in the aqueous phase. The 8-fold increase in cell surface hydrophobicity upon the addition of 20% (v/v) silicone oil showed that silicone oil modified the surface characteristics of D. tsuruhatensis LW26. The protein/polysaccharide ratio of extracellular polymeric substances (EPS) from D. tsuruhatensis LW26 presented a 3-fold enhancement. These results suggested that silicone oil induced the increase in the protein content of EPS and rendered cells hydrophobic. The resulting hydrophobic cells could adhere on the water-oil interface, improving the mass transfer by direct CB uptake from silicone oil.

Effect of cold plasma on maintaining the quality of chub mackerel (Scomber japonicus): biochemical and sensory attributes.

BACKGROUND: Atmospheric cold plasma (ACP) has emerged as a potential alternative to traditional methods for non-thermal food decontamination. However, few data are available about ACP treatment for seafood. In this study, dielectric barrier discharge (DBD) was applied to generate CP, and the aim of the study was to investigate the effectiveness of DBD-ACP on improving the quality of chub mackerel on the basis of chemical, microbial and sensory characteristics. RESULTS: The effect of DBD-ACP on the quality of chub mackerel (Scomber japonicus) during storage was examined. Results revealed that the optimal voltage level and exposure time of this treatment were 60 kV and 60 s respectively, and such conditions exhibited excellent inactivation efficacy and weak influence on proximate chemical compositions. Variations in total viable count (TVC), sensory scores and total volatile basic nitrogen (TVB-N) indicated that ACP treatment extended the shelf life of chub mackerel to 14 days, whereas samples without this treatment exceeded the limits of the three parameters after 6 days. The slow development rates of peroxide value (PV) and thiobarbituric acid (TBA) value implied that lipid oxidation was also effectively retarded by ACP exposure. Scanning electron microscopy confirmed that CP could effectively delay the degradation of myofibrillar proteins and enhance the stability of tissue structures. CONCLUSION: The excellent antimicrobial efficacy of ACP treatment makes it a potential and promising alternative to other seafood preservation technology. This is the first report on the application of ACP to seafood, which is essential to perishable food storage. © 2018 Society of Chemical Industry.

[Treatment of the Waste Gas Containing Methyl tert-Butyl Ether via a Biotrickling Filter].

The performance and microbial communities of methyl tert-butyl ether (MTBE) treatment using a biotrickling filter (BTF) that was inoculated with activated sewage sludge were investigated. The BTF successfully started up within 23 days when the inlet concentration of MTBE was 100 mg·m-3 and empty bed retention time was 60 s, with 70% removal efficiency (RE). Under steady-state conditions, an elimination capacity (EC) and a mineralization ratio of 13.47 g·(m3·h)-1 and 68% were achieved, respectively. The ECmax was 21.03 g·(m3·h)-1 according to the Haldane model, and a KS of 0.16 g·m-3 and KI of 0.99 g·m-3 were obtained. High-throughput sequencing was used to identify the community structure of the mixed microbial consortium in the BTF. The results indicated that Methylibium sp. (11.33%) and Blastocatella sp. (9.95%) were the dominant bacteria.

Piscinibacter caeni sp. nov., isolated from activated sludge.

A yellowish-pigmented bacterial strain, designated as MQ-18T, was isolated from a sample of activated sludge collected from a pharmaceutical factory in Zhejiang, China. The strain was characterized through a polyphasic taxonomy approach. 16S rRNA gene sequence analysis demonstrated that strain MQ-18T showed high similarities to Piscinibacter defluvii SH-1T (99.7 %) and Piscinibacter aquaticus IMCC1728T (98.4 %), thereby suggesting that it belongs to the genus Piscinibacter. The DNA-DNA relatedness values of this strain to strains SH-1T and IMCC1728T were only 35.4 and 33.3 %, respectively. Cells of MQ-18T were Gram-negative, aerobic, motile, rod-shaped and non-spore forming. This strain exhibited growth at 25-37 °C (optimum: 30 °C) in the presence of 0-3.0 % (w/v) NaCl (optimum, 0 % NaCl) and at pH 5.0-8.0 (pH 7.0). The predominant fatty acids were C12 : 0 (5.5 %), C16 : 0 (33.7 %), summed feature 3 (C16 : 1ω7c and/or C16 : 1ω6c; 38.5 %), and summed feature 4 (anteiso-C17 : 1 B and/or iso C17 : 1 I; 11.6 %). The main quinone type was ubiquinone-8, and the major polyamines were cadaverine and putrescine. The major polar lipid profile consisted of diphosphatidylglycerol, phosphatidylglycerol and phosphatidylethanolamine. The DNA G+C content was 70.1 mol%. On the basis of its phylogenetic, phenotypic and physiological characteristics, strain MQ-18T is considered to represent a novel species of the genus Piscinibacter, for which the name Piscinibacter caeni sp. nov. is proposed. The type strain is MQ-18T (CCTCC AB 2017223T=JCM 32138T).

A solid composite microbial inoculant for the simultaneous removal of volatile organic sulfide compounds: Preparation, characterization, and its bioaugmentation of a biotrickling filter.

Volatile organic sulfide compounds (VOSCs) are usually resistant to biodegradation, thereby limiting the performance of traditional biotechnology dealing with waste gas containing such pollutants especially in mixture. In this study, a solid composite microbial inoculant (SCMI) was prepared to remove dimethyl sulfide (DMS) and propanethiol (PT). Given that the DMS degradation activity of Alcaligenes sp. SY1 is inducible and the PT-degradation activity of Pseudomonas putida S-1 is constitutive, different strategies are designed for cell cultivation to obtain high VOSC removal rates of SCMI. Compared with the microbial suspension, the prepared SCMI exhibited better storage stability at 4 and 25°C. Inoculation of the SCMI in biotrickling filters (BTFs) could effectively shorten the start-up period and enhance the removal performance. Microbial analysis by Illumina MiSeq indicated that Alcaligenes sp. SY1 and P. putida S-1 might be dominant and persistent among the microbial communities of the BTF during the operation.

Comparative investigation on a hexane-degrading strain with different cell surface hydrophobicities mediated by starch and chitosan.

Bioremediation usually exhibits low removal efficiency toward hexane because of poor water solubility, which limits the mass transfer rate between the substrate and microorganism. This work aimed to enhance the hexane degradation rate by increasing cell surface hydrophobicity (CSH) of the degrader, Pseudomonas mendocina NX-1. The CSH of P. mendocina NX-1 was manipulated by treatment with starch and chitosan solution of varied concentrations, reaching a maximum hydrophobicity of 52%. The biodegradation of hexane conformed to the Haldane inhibition model, and the maximum degradation rate (ν max) of the cells with 52% CSH was 0.72 mg (mg cell)-1·h-1 in comparison with 0.47 mg (mg cell)-1·h-1 for cells with 15% CSH. The production of CO2 by high CSH cells was threefold higher than that by cells at 15% CSH within 30 h, and the cumulative rates of O2 consumption were 0.16 and 0.05 mL/h, respectively. High CSH was related to low negative charge carried by the cell surface and probably reduced the repulsive electrostatic interactions between hexane and microorganisms. The FT-IR spectra of cell envelopes demonstrated that the methyl chain was inversely proportional to increasing CSH values, but proteins exhibited a positive effect to CSH enhancement. The ratio of extracellular proteins and polysaccharides increased from 0.87 to 3.78 when the cells were treated with starch and chitosan, indicating their possible roles in increased CSH.