Comparison of environmental impacts from pyrolysis, gasification, and combustion of oily sludge.

Thermochemical treatment of oily sludge (OS) has been demonstrated to be an effective approach for resource and energy recovery. However, the migration and emission of potential pollutants have limited its further development. In this study, the environmental impacts, including aromatic compounds in liquid products, N-, S-, and Cl-containing pollutants in gaseous products, and residual organic matter and heavy metals in solid residues, during the pyrolysis, gasification, and combustion processes of OS are comparatively investigated. The results indicate that the aromatics in the liquid products obtained from pyrolysis and gasification are primarily hydrocarbons with 10, 14, and 16 carbon atoms, and the corresponding degree of unsaturation is between 7 and 16. By contrast, the aromatics produced during combustion are mainly hydrocarbons with 10-12 carbon atoms and an unsaturation degree of 7. The liquid products from gasification of OS contain aromatics with more carbon atoms and a higher degree of unsaturation, suggesting potential issues of recalcitrant aromatics and tar by-products during the gasification process. The release behaviors of N-, S-, and Cl-containing pollutants during the thermochemical treatment of OS are closely related to the specific thermochemical technology and treatment temperature. At 550 °C, these pollutants are gradually released from the OS. By contrast, at 950 °C, they are released over a narrow temperature range with significantly higher concentrations. Furthermore, compared with the peak concentrations of SO2 and HCl during thermochemical processing at 550 °C, these values increase by 1-2 orders of magnitude at 950 °C. With the increase in treatment temperature, the loss on ignition (LOI) of residues from pyrolysis or gasification of OS gradually decreases and stabilizes around 0.5 %. On the other hand, the LOI from combustion fluctuates around 1.0 %. In addition, the removal rates of total organic carbon in the residues from all three thermochemical processes exceed 98.89 %. However, the potential ecological risks associated with heavy metals in the residues from thermochemical treatment of OS also increase to some extent. Cr, Cu, and Zn are found to evaporate and escape into liquid and gaseous products, while Pb is retained in the residues. Notably, the residue from combustion poses the highest environmental risks among the three processes.

Sarcopenia as a predictor of nutritional status and comorbidities: a cross-sectional and mendelian randomization study.

BACKGROUND: With the advancement of world population aging, age-related sarcopenia (SP) imposes enormous clinical burden on hospital. Clinical research of SP in non-geriatric wards has not been appreciated, necessitating further investigation. However, observational studies are susceptible to confounders. Mendelian randomization (MR) can effectively mitigate bias to assess causality. OBJECTIVE: To investigate the correlation between SP and comorbidities in orthopedic wards, and subsequently infer the causality, providing a theoretical basis for developing strategies in SP prevention and treatment. METHODS: Logistic regression models were employed to assess the correlation between SP and comorbidities. The MR analysis was mainly conducted with inverse variance weighted, utilizing data extracted from the UK and FinnGen biobank (Round 9). RESULTS: In the cross-sectional analysis, SP exhibited significant associations with malnutrition (P = 0.013) and some comorbidities, including osteoporosis (P = 0.014), body mass index (BMI) (P = 0.021), Charlson Comorbidity Index (CCI) (P = 0.006). The MR result also provided supporting evidence for the causality between SP and hypertension, osteoporosis and BMI. These results also withstood multiple sensitivity analyses assessing the validity of MR assumptions. CONCLUSION: The result indicated a significant association between SP and BMI, CCI, malnutrition, and osteoporosis. We highlighted that SP and comorbidities deserved more attention in non-geriatric wards, urging further comprehensive investigation.

Pollutant degradation and hydrogen production of landfill leachate membrane concentrates via aqueous phase reforming.

Membrane filtration is a mainstream method for landfill leachate treatment, leaving the landfill leachate membrane concentrates (LLMCs) a high-toxicity residue. Conventional LLMCs disposal technology shows specific challenges due to the low biodegradability, high inorganic salts, and high heavy metal ions content of LLMCs. Therefore, it is necessary to degrade LLMCs with a more suitable technology. In this study, a special method was proposed to convert some organic chemicals into valuable compounds by aqueous phase reforming (APR). Ni-based catalysts (Ni//La2O3, Ni/CeO2, Ni/MgO, and Ni/Al2O3) were prepared to investigate the effect of different supports on the APR of LLMCs. APR performed outstanding characteristics in the decrease of chemical oxygen demand (COD) and total organic carbon (TOC), the degradation of macromolecules, and the removal of heavy metal ions in the aqueous phase. In addition, H2 was generated which is beneficial for energy compensating during the APR process. The best-performing catalyst (Ni/Al2O3) was selected to investigate the effects of reaction temperature, reaction time, and catalyst addition on product distribution. The optimal H2 selectivity (44.71%) and H2 production (11.63 mmol/g COD) were obtained at 250 °C with 2 g Ni/Al2O3 usage for 1 h. This paper provided a new perspective on the disposal of LLMCs, which will degrade pollutants efficiently.

Green transformation of oily sludge through geopolymer: Material properties and hydration mechanisms.

Oily sludge (OS) is a kind of hazardous waste generated from the petrochemical industry. Currently, pyrolysis has been widely applied for OS disposal, while low-oil content (<5 wt%) OS still lacks novel technology to achieve efficient resource utilization and harmful substances immobilization. In this study, a kind of OS-based geopolymer was developed by OS and ground granulated blast furnace slag (GGBS). The results showed that in geopolymer with 30 wt% OS, the content of total petroleum hydrocarbons (TPHs) decreased by 82%, Zn achieved 100% stabilization, and the 28 d compressive strength could still reach 32.8 MPa. The appropriate oil content filled the pores and cracks in geopolymer matrix. The constructed model compounds further elucidated the hydration mechanisms of OS-geopolymer. The nucleation effect of crude oil and micro-aggregate effect of minerals jointly improved the polymerization degree of C-(A)-S-H gels. OS promoted the transformation of [SiO4]4- monomers into C-(A)-S-H unbranched middle groups and three-dimensional networks, thereby efficiently stabilizing harmful substances. Sustainability analysis showed that OS-based geopolymer had good environmental and economic benefits. Overall, this work provides theoretical guidance for the green transformation of OS in the construction field.

Efficient reclamation of phosphorus from wetland biomass waste via liquid-recirculated hydrothermal carbonization and precipitation.

Hydrothermal carbonization (HTC) for the recovery of phosphorus (P) from biomass wastes has attracted considerable attention, while migration of P to the liquid phase greatly weakened P recovery efficiency and elevated the environmental risk. Therefore, a systematic scheme was proposed in this work to accomplish the complete reclamation of P from wetland plant (Ceratophyllum demersum) through coupling liquid-recirculated HTC mediated by H2O or H2SO4 with precipitation, and the migration and speciation of P during this process was determined by P K-edge X-ray absorption near edge structure, 31P nuclear magnetic resonance, and the modified sequential extraction. The P concentration in the liquid phase increased with the recirculation of HTC process water, and reached up to 550.6 mg L-1. >98.1 % of P in the recirculated liquid products was recovered in the forms of hydroxyapatite and struvite with the HTC mediums of H2O and H2SO4, respectively, without the addition of exogenous metals. In addition to the production of P compounds, P-enriched hydrochar was simultaneously obtained during this process. The HTC medium and liquid recirculation had profound impact on the hydrochar characteristics and the transformation of P. Hydroxyapatite and magnesium phosphate were the dominant P species in the hydrochars derived from H2O-mediated HTC, while FePO4 and other Ca-P species [Ca3(PO4)2 and Ca(H2PO4)2] dominated the P compounds in the H2SO4-mediated hydrochar. These results suggest that coupling liquid-recirculated HTC and precipitation could be a promising strategy for P reclamation, which could provide new insights into the P recovery from biomass waste.

Accelerated screening of active sites on biochar for catalysis and adsorption via multidimensional fingerprint factor descriptors.

Highly active biochar has great application potential in heterogeneous catalysis and adsorptive processes. The complexity of carbonization process makes it difficult to construct target active sites. This work put forward a reactive descriptor based on pyrolysis parameters and intrinsic composition of biomass. Results show that the model showed better predictive performance for C-C/C=C (R2 = 0.85), C=O (R2 = 0.85) and defect (R2 = 0.91) sites. The SHapley Additive exPlanation analysis shows that the pyrolysis parameters and the higher heating values are equally important for the active sites. The predictive performance and guiding role of the descriptor were validated by experiments. The descriptors proposed in this study integrated significant advantages of simplicity and easy accessibility, which would break the bottleneck of accurate construction of active sites and provide a theoretical basis for high-value resource utilization of biomass.

Optimized microbial fuel cell-powered electro-Fenton processes to enhance electricity and bisphenol A removal by varying external resistance and electrolyte concentrations.

This study is the first to investigate the effects of external resistance and electrolyte concentration on the performance of a bioelectro-Fenton (BEF) system, involving measurements of power density, H2O2 generation, and bisphenol A (BPA) removal efficiency. With optimized operating conditions (external resistance of 1.12 kΩ and cathodic NaCl concentration of 1,657 mg/L), the BEF system achieved a maximum power density of 38.59 mW/m2, which is about 3.5 times higher than with 1 kΩ external resistance and no NaCl. This system featured a 71.7 % reduction in total internal resistance. The optimized BEF also accelerated the oxygen reduction reaction rate, increasing H2O2 generation by 4.4 times compared to the unoptimized system. Moreover, it exhibited superior BPA degradation performance, removing over 99 % of BPA within 14 hs, representing a 1.1 to 3.3-fold improvement over the unoptimized BEF. By the fifth cycle (70 h), the optimized BEF still removed 70 % of BPA. Optimizing the operating conditions significantly increased the abundance of electrochemically active bacteria (Pseudomonadaceae) from 2.2 % to 20 %, facilitating rapid acclimation. The study demonstrates the strong potential of an optimized BEF system for removing persistent pollutants.

Characteristics of pollutant generation from 3D-printed photocured waste combustion.

With the rapid advancement of photopolymerization-based 3D printing technology, the volume of PCW has experienced a sharp increase. The potential environmental ramifications of PCW disposal demand careful consideration, especially given its current practice of being incineration alongside MSW. In this study, the TG-MS/FTIR system was carried out to probe the thermogravimetric characteristics and volatile byproducts during combustion. Various product compositions resulting from different mixing ratios of PCW incineration with MSW were investigated. It was observed that fluorene (C13H10) and triphenylene (C18H12) produced by PCW combustion 0.52 mg/g and 0.43 mg/g respectively, which are twice as abundant as those generated from normal plastic. When PCW incineration along with MSW, compounds such as naphthalene (C10H8), cyclohexane (C6H12), and heptane (C7H16) were generated in concentrations of 1.25 mg/g, 1.05 mg/g, and 0.95 mg/g respectively, which are at least twice as much as with MSW incineration alone. The incineration of PCW with rubber and textiles resulted in the production of 2.34 mg/g to 3.76 mg/g more PAHs compared to PCW combustion alone. The incineration of PCW with paper resulted in the production of 3.12 mg/g to 5.15 mg/g more heptane, nonane, cyclohexane, pyrene, and anthracene than PCW combustion alone. Incineration of PCW with wood proved to be the cleanest method, with product contents primarily below 0.10 mg/g. When incinerated with food residues or normal plastic, most of the product content remained below 0.05 mg/g. Considering the environmental pollution resulting from PCW combustion, the disposal of PCW warrants careful consideration and management.

Effects of walking on epigenetic age acceleration: a Mendelian randomization study.

INTRODUCTION: Walking stands as the most prevalent physical activity in the daily lives of individuals and is closely associated with physical functioning and the aging process. Nonetheless, the precise cause-and-effect connection between walking and aging remains unexplored. The epigenetic clock emerges as the most promising biological indicator of aging, capable of mirroring the biological age of the human body and facilitating an investigation into the association between walking and aging. Our primary objective is to investigate the causal impact of walking with epigenetic age acceleration (EAA). METHODS: We conducted a two-sample two-way Mendelian randomization (MR) study to investigate the causal relationship between walking and EAA. Walking and Leisure sedentary behavior data were sourced from UK Biobank, while EAA data were gathered from a total of 28 cohorts. The MR analysis was carried out using several methods, including the inverse variance weighted (IVW), weighted median, MR-Egger, and robust adjusted profile score (RAPS). To ensure the robustness of our findings, we conducted sensitivity analyses, which involved the MR-Egger intercept test, Cochran's Q test, and MR-PRESSO, to account for and mitigate potential pleiotropy. RESULTS: The IVW MR results indicate a significant impact of usual walking pace on GrimAge (BETA = - 1.84, 95% CI (- 2.94, - 0.75)), PhenoAge (BETA = - 1.57, 95% CI (- 3.05, - 0.08)), Horvath (BETA = - 1.09 (- 2.14, - 0.04)), and Hannum (BETA = - 1.63, 95% CI (- 2.70, - 0.56)). Usual walking pace is significantly associated with a delay in epigenetic aging acceleration (EAA) (P < 0.05). Moreover, the direction of effect predicted by the gene remained consistent across RAPS outcomes and sensitivity MR analyses. There is a lack of robust causal relationships between other walking conditions, such as walking duration and walking frequency, on EAA (P > 0.05). CONCLUSION: Our evidence demonstrates that a higher usual walking pace is associated with a deceleration of the acceleration of all four classical epigenetic clocks acceleration.

Intelligent technologies powering clean incineration of municipal solid waste: A system review.

Cleanliness has been paramount for municipal solid waste incineration (MSWI) systems. In recent years, the rapid advancement of intelligent technologies has fostered unprecedented opportunities for enhancing the cleanliness of MSWI systems. This paper offers a review and analysis of cutting-edge intelligent technologies in MSWI, which include process monitoring, intelligent algorithms, combustion control, flue gas treatment, and particulate control. The objective is to summarize current applications of these techniques and to forecast future directions. Regarding process monitoring, intelligent image analysis has facilitated real-time tracking of combustion conditions. For intelligent algorithms, machine learning models have shown advantages in accurately forecasting key process parameters and pollutant concentrations. In terms of combustion control, intelligent systems have achieved consistent prediction and regulation of temperature, oxygen content, and other parameters. Intelligent monitoring and forecasting of carbon monoxide and dioxins for flue gas treatment have exhibited satisfactory performance. Concerning particulate control, multi-objective optimization facilitates the sustainable utilization of fly ash. Despite remarkable progress, challenges remain in improving process stability and monitoring instrumentation of intelligent MSWI technologies. By systematically summarizing current applications, this timely review offers valuable insights into the future upgrade of intelligent MSWI systems.

Enhancement of methane production from anaerobic digestion of Erigeron canadensis via O2-nanobubble water supplementation.

Malignant invasive Erigeron canadensis, as a typical lignocellulosic biomass, is a formidable challenge for sustainable and efficient resource utilization, however nanobubble water (NBW) coupled with anaerobic digestion furnishes a prospective strategy with superior environmental and economic effectiveness. In this study, influence mechanism of various O2-NBW addition times on methanogenic performance of E. canadensis during anaerobic digestion were performed to achieve the optimal pollution-free energy conversion. Results showed that supplementation of O2-NBW in digestion system could significantly enhance the methane production by 10.70-16.17%, while the maximum cumulative methane production reached 343.18 mL g-1 VS in the case of one-time O2-NBW addition on day 0. Furthermore, addition of O2-NBW was conducive to an increase of 2-90% in the activities of dehydrogenase, α-glucosidase and coenzyme F420. Simultaneously, both facultative bacteria and methanogenic archaea were enriched as well, further indicating that O2-NBW might be responsible for facilitating hydrolytic acidification and methanogenesis. Based on Kyoto Encyclopedia of Genes and Genomes (KEGG) cluster analysis, provision of O2-NBW enhanced the metabolism of carbohydrate and amino acid, translation as well as membrane transport of bacteria and archaea. This study might offer the theoretical guidance and novel insights for efficient recovery of energy from lignocellulosic biomass on account of O2-NBW adhibition in anaerobic digestion system, progressing tenor of carbon-neutral vision.

Preparation of iron oxide-modified digestate biochar and effect on anaerobic digestion of kitchen waste.

Two kinds of Fe2O3-modified digestate-derived biochar (BC) were prepared and their effects on anaerobic digestion (AD) of kitchen waste (40.0 g VS/L) were investigated, with BC and Fe2O3 addition used as a comparison. The results showed that Fe2O3-modified BC (Fe2O3-BC1 prepared by co-precipitation and Fe2O3-BC2 by impregnation) significantly increased methane yield (20.8 % and 16.4 %, respectively) and reduced volatile fatty acid concentration (35.6 % and 29.6 %, respectively). Microbial high-throughput analysis revealed that Fe2O3-modified BC selectively enriched Clostridium (47.3 %) and Methanosarcina (72.2 %), suggesting that direct interspecies electron transfer contributing to improved biogas production performance was established and enhanced. Correlation analysis indicated that biogas production performance was improved by the larger specific surface area (83.4 m2/g), pore volume (0.101 cm3/g), and iron content (97.4 g/Kg) of the BC. These results offer insights for enhancing the efficacy of AD processes using Fe2O3-modified BCs as additives.

Mechanistic exploration of polytetrafluoroethylene thermal plasma gasification through multiscale simulation coupled with experimental validation.

The ever-growing quantities of persistent Polytetrafluoroethylene (PTFE) wastes, along with consequential ecological and human health concerns, stimulate the need for alternative PTFE disposal method. The central research challenge lies in elucidating the decomposition mechanism of PTFE during high-temperature waste treatment. Here, we propose the PTFE microscopic thermal decomposition pathways by integrating plasma gasification experiments with multi-scale simulations strategies. Molecular dynamic simulations reveal a pyrolysis-oxidation & chain-shortening-deep defluorination (POCD) degradation pathway in an oxygen atmosphere, and an F abstraction-hydrolysis-deep defluorination (FHD) pathway in a steam atmosphere. Density functional theory computations demonstrate the vital roles of 1O2 and ·H radicals in the scission of PTFE carbon skeleton, validating the proposed pathways. Experimental results confirm the simulation results and show that up to 80.12% of gaseous fluorine can be recovered through plasma gasification within 5 min, under the optimized operating conditions determined through response surface methodology.

Pyrolytic homogeneity enhancement of municipal solid waste using a clustering-based sorting strategy.

Heterogeneity of pyrolytic parameters in municipal solid waste (MSW) significantly hinders its waste-to-energy efficiency. So far, hardly any light has been shed on current pyrolytic heterogeneity conditions or feasible pyrolytic homogeneity enhancement approaches of MSW. Accordingly, pyrolytic properties (Ea and logA) of 130 MSW samples in 6 categories were collected from literature. A kinetic parameters clustering-based sorting strategy for MSW was proposed. A so-called C index was established to compare their sorting performance for Ea and logA against two traditional sorting strategies (substance categorization and density clustering). Results showed that the proposed sorting strategies outperformed the traditional ones in pyrolytic homogeneity enhancement, where the optimal C_Ea and C_logA reached 1578.30 kJ/mol and 93.11 -log min. Among investigated clustering methods, k-means clustering outperformed hierarchical clustering, which could be attributed to its adaptability to the sample structure. Future perspectives involving data set expansion, model framework development, and downstream technologies matching were also discussed. The index C established in this study can be used to evaluate other clustering models.

Pyrolysis of exhausted biochar sorbent: Fates of cadmium and generation of products.

Biochar is a promising sorbent for Cd removal from water, while the disposal of the exhausted Cd-enriched biochar remains a challenge. In this study, pyrolysis was employed to treat the exhausted biochar under N2 and CO2 atmospheres at 600-900 °C, and the fate of Cd during pyrolysis and characteristics of high-valued products were determined. The results indicated that higher temperature and CO2 atmosphere favored the volatilization of Cd. Based on the toxicity characteristic leaching procedure (TCLP) results, the pyrolysis treatment under both atmospheres enhanced the stability of Cd, and the leached Cd concentration of regenerated biochar obtained at high temperatures (>800 °C) was lower than 1 mg/L. Compared with the pristine biochar, the regenerated biochar demonstrated higher carbon content and pH, whereas the contents of oxygen and hydrogen declined, and exhibited promising sorption properties (35.79 mg/g). The atmosphere played an important role in modifying biochar properties and syngas composition. The N2 atmosphere facilitated CH4 production, whereas the CO2 atmosphere increased the proportion of CO. These results implied that pyrolysis can be a valuable and environmental-friendly strategy for the treatment and reuse of exhausted biochar sorbent.

Application of waste derived magnetic acid-base bifunctional CoFe/biochar/CaO as an efficient catalyst for biodiesel production from waste cooking oil.

The loss of active components, weak acid resistance, and low recover efficiency of common Ca-based catalysts limited its further development and application. In this study, to effectively produce biodiesel from waste cooking oil (WCO), a green and recyclable magnetic acid-base bifunctional CoFe/biochar/CaO catalyst was prepared from sargassum and river snail shell waste via hydrothermal method. The catalysts' structure and properties were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), CO2/NH3 temperature programmed desorption (CO2/NH3 TPD), etc., The prepared catalyst mainly consisted of the carbon skeleton, CoFe alloy, and CaO. CoFe alloy provided catalyst's ferromagnetism for magnetic separation as well as acid sites for transesterification of WCO. Ca and other metal species with nanoscale (∼5.64 nm) were dispersively anchored on sargassum biochar surface, thereby leading to good catalytic activity (99.21% biodiesel yield) and stability (91.70% biodiesel yield after the 5th cycle). In addition, response surface methodology-Box-Behnken design (RSM-BBD) revealed the optimal operational conditions were 16:1 methanol/oil molar ratio, 3 wt% catalyst dosage, 73 °C for 157 min. The maximum biodiesel yield predicted value was 98.29% and the experimental value was 99.21%, indicating good satisfaction of the established model. Moreover, the quality of WCO biodiesel met the ASTM D6751 standards. This study benefits magnetic waste-derived acid-base bifunctional catalysts for the disposal of WCO towards sustainable biodiesel production.

Effect of MDA-mediated oxidation on the protein structure and digestive properties of golden pomfret.

In this study, golden pomfret myofibrillar protein (MP) was used as the research object, and the oxidation system of malondialdehyde (MDA) as an inducer and the static digestion model in vitro was established for the analysis of the changes in protein structure and molecular morphology during oxidation and digestion. Subsequently, the effects of MDA-mediated oxidation on the structure and digestive properties of golden pomfret myofibrillar fibrillar protein were determined. The results showed that the hydrolysis degree and digestion rate of MP were inhibited with the increase in MDA concentration (0, 0.5, 1, 2, 5, 10 mmol/L), and the carbonyl group, surface hydrophobicity, irregular curling, and MDA content increased significantly (P < 0.05), whereas the total sulfhydryl groups, α-helices, free amino groups, hydrolysis degree, and MDA incorporation decreased significantly (P < 0.05), The molecular particle size was significantly reduced (P < 0.05), and the molecular morphology and molecular structure were analyzed (P >0.05). Finally, the molecular size and cross-linking degree gradually increased. In conclusion, MDA can alter the structure and morphology of proteins, resulting in a decrease in hydrolysis and digestion rate. This study can provide theoretical support and reference for the regulation of protein digestion.

Oxidized myoglobin: Revealing new perspectives and insights on factors affecting the water retention of myofibrillar proteins.

The impact of oxidized myoglobin (Mb) on myofibrillar protein (MP) oxidation and water retention was investigated. Results showed that the oxidation of Mb increased with increasing concentration of oxidized linoleic acid (OLA). In the presence of 100 mmol/L OLA, hemin iron decreased by 62.07 % compared to the control group. Further investigation showed that mild oxidation of Mb (≤10 mmol/L OLA) increased the water retention and the absolute value of the zeta potential of MP, whereas excessive oxidation (>10 mmol/L OLA) decreased these properties. With the increase of Mb oxidation, the carbonyl content in MP increased, and α-helices changed to random helix. And the tertiary structure changed. Pearson correlation analysis suggested that oxidized Mb affected the water retention of MP, which was closely related to hemin iron and non-hemin iron. In conclusion, OLA induced Mb oxidation, further promoted MP oxidation and affected its water retention.

Effect of landfilling time on physico-chemical properties of combustible fractions in excavated waste.

Excavated waste is a byproduct of microbial decomposition and fermentation following landfill disposal. The effective management and utilization of excavated waste offer broad prospects for environmental and resource protection, as well as economic growth. While current research predominantly focuses on plastics in landfills, the physico-chemical properties of excavated waste over extended landfilling time remain unclear. This study aimed to address this gap by excavating waste from a landfill in Tianjin, China, with a maximum landfilling time of 18 years. The findings revealed that, compared to municipal solid waste (MSW), the excavated waste exhibited increased calorific value, ash content, and fixed carbon content after screening the landfill-mined-soil-like-fine fraction. The average calorific value of the excavated waste could reach 57.8 MJ/kg. Additionally, the oxygen content in the excavated combustible waste exceeded that of MSW, increasing from 25.59 % to 34.22 %. This phenomenon is potentially linked to the oxidation of attached soil impurities and waste. The study identified polyethylene (PE), polypropylene (PP), expanded polystyrene (EPS), polyethylene terephthalate (PET), and wood as the primary combustible components. Notably, the excavated waste exhibited a significant decrease in surface gloss, adopting a rough texture with apparent holes, potentially attributed to the acidification and corrosion of organic matter during fermentation. Nevertheless, the breaking of molecular bonds could also contribute to waste fragmentation. Furthermore, an increase in landfilling time resulted in a more pronounced decrease in mechanical properties. For instance, the failure load of PE decreased from 15.61 N to 6.46 N, and PET reduced from 884.83 N to 186.56 N. The chemical composition of excavated waste has changed, with -OH and CO observed in PE with an 18-year landfilling time. In conclusion, these results provide a theoretical foundation for the recycling of excavated waste and contribute to the advancement of waste management and recycling technologies.

Research on the deformation laws of buildings adjacent to shield tunnels in clay strata.

Earth pressure shields are widely used in tunnel construction due to their low environmental impact and mechanized operations. However, ensuring the stability of the excavation surface during the construction process is crucial. Any instability in the excavation surface can lead to soil destruction, such as body collapse or surface uplift. Additionally, the tunneling process can cause deformation disturbances to nearby buildings. In the case of Beijing Metro Line 17, detailed survey data and construction monitoring data were collected through field surveys and tests. The study combined theoretical analysis and numerical simulations to investigate the impact of shield tunneling in clay layers on neighboring buildings. The focus was on analyzing the physical deformation and the response law of influencing factors, such as stratum parameters and engineering effects on surface settlement, building inclination, and distortion. Furthermore, sensitivity analysis of the deformation impact was conducted, and corresponding measures for deformation control were proposed.