Menarche-a journey into womanhood: age at menarche and health-related outcomes in East Asians.

STUDY QUESTION: Are there associations of age at menarche (AAM) with health-related outcomes in East Asians? SUMMARY ANSWER: AAM is associated with osteoporosis, Type 2 diabetes (T2D), glaucoma, and uterine fibroids, as demonstrated through observational studies, polygenic risk scores, genetic correlations, and Mendelian randomization (MR), with additional findings indicating a causal effect of BMI and T2D on earlier AAM. WHAT IS KNOWN ALREADY: Puberty timing is linked to adult disease risk, but research predominantly focuses on European populations, with limited studies in other groups. STUDY DESIGN, SIZE, DURATION: We performed an AAM genome-wide association study (GWAS) with 57 890 Han Taiwanese females and examined the association between AAM and 154 disease outcomes using the Taiwanese database. Additionally, we examined genetic correlations between AAM and 113 diseases and 67 phenotypes using Japanese GWAS summary statistics. PARTICIPANTS/MATERIALS, SETTING, METHODS: We performed AAM GWAS and gene-based GWAS studies to obtain summary statistics and identify potential AAM-related genes. We applied phenotype, polygenic risk scores, and genetic correlation analyses of AAM to explore health-related outcomes, using multivariate regression and linkage disequilibrium score regression analyses. We also explored potential bidirectional causal relationships between AAM and related outcomes through univariable and multivariable MR analyses. MAIN RESULTS AND THE ROLE OF CHANCE: Fifteen lead single-nucleotide polymorphisms and 24 distinct genes were associated with AAM in Taiwan. AAM was genetically associated with later menarche and menopause, greater height, increased osteoporosis risk, but lower BMI, and reduced risks of T2D, glaucoma, and uterine fibroids in East Asians. Bidirectional MR analyses indicated that higher BMI/T2D causally leads to earlier AAM. LIMITATIONS, REASONS FOR CAUTION: Our findings were specific to Han Taiwanese individuals, with genetic correlation analyses conducted in East Asians. Further research in other ethnic groups is necessary. WIDER IMPLICATIONS OF THE FINDINGS: Our study provides insights into the genetic architecture of AAM and its health-related outcomes in East Asians, highlighting causal links between BMI/T2D and earlier AAM, which may suggest potential prevention strategies for early puberty. STUDY FUNDING/COMPETING INTEREST(S): The work was supported by China Medical University, Taiwan (CMU110-S-17, CMU110-S-24, CMU110-MF-49, CMU111-SR-158, CMU111-MF-105, CMU111-MF-21, CMU111-S-35, CMU112-SR-30, and CMU112-MF-101), the China Medical University Hospital, Taiwan (DMR-111-062, DMR-111-153, DMR-112-042, DMR-113-038, and DMR-113-103), and the Ministry of Science and Technology, Taiwan (MOST 111-2314-B-039-063-MY3, MOST 111-2314-B-039-064-MY3, MOST 111-2410-H-039-002-MY3, and NSTC 112-2813-C-039-036-B). The funders had no influence on the data collection, analyses, or conclusions of the study. No conflict of interests to declare. TRIAL REGISTRATION NUMBER: N/A.

Saturation and beating of acoustic phonon oscillations excited near the exciton resonance of strained polar ZnO/Zn0.8Mg0.2O multiple quantum wells.

Saturation and beating of coherent acoustic phonon (CAP) oscillations were observed and attributed to the screening of a built-in electric field with increasing pump power using degenerate pump-probe measurements near the exciton resonance of polar ZnO/Zn0.8Mg0.2O multiple quantum wells (MQWs). After purifying the CAP signals by using an empirical mode decomposition, we found not only that the CAP amplitude follows the trend of the band gap renormalization (BGR) and shows saturation at high pump power, but also that the CAP oscillation period coincides with that of the MQWs, consistent with the XRD and TEM results. An additional low-frequency oscillation modifying the CAP signal is revealed due to the negative change in refractive index caused by BGR as the pump power increases.

Non-interferometric phase retrieval using refractive index manipulation.

We present a novel, inexpensive and non-interferometric technique to retrieve phase images by using a liquid crystal phase shifter without including any physically moving parts. First, we derive a new equation of the intensity-phase relation with respect to the change of refractive index, which is similar to the transport of the intensity equation. The equation indicates that this technique is unneeded to consider the variation of magnifications between optical images. For proof of the concept, we use a liquid crystal mixture MLC 2144 to manufacture a phase shifter and to capture the optical images in a rapid succession by electrically tuning the applied voltage of the phase shifter. Experimental results demonstrate that this technique is capable of reconstructing high-resolution phase images and to realize the thickness profile of a microlens array quantitatively.

High-quality and Large-size Topological Insulator Bi2Te3-Gold Saturable Absorber Mirror for Mode-Locking Fiber Laser.

A novel high-quality, large-size, reflection-type topological insulator Bi2Te3-Gold (BG) film-based nonlinear optical modulator has been successfully fabricated as a two-dimensional saturable absorber mirror (SAM) by pulsed laser deposition (PLD). This BG-SAM possesses saturation fluence of 108.3 µJ/cm2, modulation depth (ΔR) of 6.5%, non-saturable loss of 38.4%, high damage threshold above 1.354 mJ/cm2 and excellent uniformity providing for the generation of passive mode-locked (ML) pulses for erbium-doped fiber lasers (EDFLs) on a large sample area. Under 124 mW 976 nm pumping, We obtained 452-fs continuous-wave ML pulses with pulse energy of 91 pJ and full width at half-maximum (FWHM) of 6.72-nm from this EDFL. The results clearly evidence that the PLD is an efficient method for fabricating BG-SAM that is suitable for a compact ultrafast ML fiber laser system.

Phase retrieval by using the transport-of-intensity equation with Hilbert transform.

Phase recovery by solving the transport-of-intensity equation (TIE) is a non-iterative and non-interferometric phase retrieval technique. From solving the TIE with conventional, one partial derivative and Hilbert transform methods for both the periodic and aperiodic samples, we demonstrate that the Hilbert transform method can provide the smoother phase images with edge enhancement and fine structures. Furthermore, compared with the images measured by optical and atomic force microscopy, the Hilbert transform method has the ability to quantitatively map out the phase images for both the periodic and aperiodic structures.

Stable passive optical clock generation in SOA-based fiber lasers.

Stable optical pulse trains are obtained from 1.3-µm and 1.5-µm semiconductor optical amplifier (SOA)-based fiber lasers using passive optical technology. The waveforms depend on SOA currents, and the repetition rates can be tuned by varying the relative length of sub-cavities. The output pulse trains of these SOA-based fiber lasers are stable against intracavity polarization adjustment and environmental perturbation. The optical clock generation is explained in terms of mode competition, self-synchronization, and SOA saturation. Without resorting to any active modulation circuits or devices, the technology used here is simple and may find various applications in the future.

Passive mode locking of ytterbium- and erbium-doped all-fiber lasers using graphene oxide saturable absorbers.

Broadband graphene oxide/PVA films were used as saturable absorbers (SAs) for mode locking erbium-doped fiber laser (EDFL) and ytterbium-doped fiber laser (YDFL) at 1.06 µm and 1.55 µm. They provide modulation depths of 3.15% and 6.2% for EDFL and YDFL, respectively. Stable self-starting mode-locked pulses are obtained for both lasers, confirming that the graphene oxide is cost-effective. We have generated mode-locked pulses with spectral width, repetition rate, and pulse duration of 0.75 nm, 9.5 MHz, and 2.7 ps. This is the shortest pulse duration directly obtained from an all-normal-dispersion YDFL with graphene-oxide saturable absorber.

12 GHz passive harmonic mode-locking in a 1.06 µm semiconductor optical amplifier-based fiber laser with figure-eight cavity configuration.

We report the generation of passively harmonic mode-locked pulses using a 1.06 µm semiconductor optical amplifier (SOA) in a figure-eight laser configuration operated in the all-normal-dispersion regime. Different orders of harmonic mode-locking can be obtained from 30 MHz to 12.02 GHz by changing the injection current of the SOA from 80 to 660 mA together with the adjustment of polarization controllers. The highest pulse repetition rate increases almost linearly with the SOA current. As SOA current is set to 660 mA, we obtain the intracavity power of 46 mW at the highest repetition rate of 12.02 GHz, corresponding to the 1202th harmonic of the fundamental mode-locking frequency. To our best knowledge, this is the lowest intracavity power to generate the highest repetition rate with a passively mode-locked laser in the all-normal-dispersion regime.

A highly efficient graphene oxide absorber for Q-switched Nd:GdVO4 lasers.

We demonstrated that graphene oxide material could be used as a highly efficient saturable absorber for the Q-switched Nd:GdVO4 laser. A novel and low-cost graphene oxide (GO) absorber was fabricated by a vertical evaporation technique and high viscosity of polyvinyl alcohol (PVA) aqueous solution. A piece of GO/PVA absorber, a piece of round quartz, and an output coupler mirror were combined to be a sandwich structure passive component. Using such a structure, 104 ns pulses and 1.22 W average output power were obtained with the maximum pulse energy at 2 µJ and a slope efficiency of 17%.

High-power, passively mode-locked Nd:GdVO4 laser using single-walled carbon nanotubes as saturable absorber.

We use a new (to our knowledge) fabrication method of a single-walled carbon nanotube (SWCNT) absorber without polymer to sustain high-power illumination. Using a series of saturable absorbers (SAs) incorporating different amounts of SWCNTs, we demonstrate mode-locking for a Nd:GdVO4 laser in the 1 µm spectral range. Continuous-wave mode-locking (CWML) pulses with a maximum output power of 3.6 W at 1063 nm and high noise extinction of 61 dB has been achieved to give the highest pulse peak power of 3.6 kW and pulse energy of 30 nJ under 15 W pumping. To our knowledge, this is the highest CWML output power with SWCNT-SAs reported. The measured nonlinear absorption of the SWCNT-SAs shows a modulation depth of ~3% with subpicosecond recovery time.

Stable Q-switched mode-locked Nd3+:LuVO4 laser by Cr4+:YAG crystal.

In use of saturable Cr(4+):YAG crystals, we have demonstrated the stable Q-switched and mode-locked (QML) operation of the Nd:LuVO(4) laser. The operation range of QML in use of the Cr(4+):YAG is larger than that use of SESAM and NLM. The obtained shape of Q-switched envelope, repetition rate and pulse energy are demonstrated to depend on the initial transmittance of the Cr(4+):YAG and reflectivity of the output coupler. Using R = 60% and T(0) = 40%, the highest pulse energy of 77 microJ of each Q-switched envelope, and the highest peak power about 200 kW of Q-switched mode-locked pulses can be obtained at 15 W pump power. It demonstrate the superior characteristic of the Nd:LuVO(4) crystal.