Monitoring the remediation of groundwater polluted by MSW landfill leachates by activated carbon and zeolite with spectral induced polarization technique.

The municipal solid waste (MSW) landfill in Hangzhou, China utilized zeolite and activated carbon (AC) as permeable reactive barrier (PRB) fill materials to remediate groundwater contaminated with MSW leachates containing ammonium, chemical oxygen demand (COD), and heavy metals. The spectral induced polarization (SIP) technique was chosen for monitoring the PRB because of its sensitivity to pore fluid chemistry and mineral-fluid interface composition. During the experiment, authentic groundwater collected from the landfill site was used to permeate two columns filled with zeolite and AC, and the SIP responses were measured at the inlet and outlet over a frequency range of 0.01-1000 Hz. The results showed that zeolite had a higher adsorption capacity for COD (7.08 mg/g) and ammonium (9.15 mg/g) compared to AC (COD: 2.75 mg/g, ammonium: 1.68 mg/g). Cation exchange was found to be the mechanism of ammonium adsorption for both zeolite and AC, while FTIR results indicated that π-complexation, π-π interaction, and electrostatic attraction were the main mechanisms of COD adsorption. The Cole-Cole model was used to fit the SIP responses and determine the relaxation time (τ) and normalized chargeability (mn). The calculated characteristic diameters of zeolite and AC based on the Schwarz equation and relaxation time (τ) matched the pore sizes observed from SEM and MIP, providing valuable information on contaminant distribution. The mn of zeolite was positively linear with adsorbed ammonium (R2 = 0.9074) and COD (R2 = 0.8877), while the mn of AC was negatively linear with adsorbed ammonium (R2 = 0.8192) and COD (R2 = 0.7916), suggesting that mn could serve as a surrogate for contaminant saturation. The laboratory-based real-time non-invasive SIP results showed good performance in monitoring saturation and provide a strong foundation for future field PRB monitoring.

Phosphatidylcholine-mediated regulation of growth kinetics for colloidal synthesis of cesium tin halide nanocrystals.

Cesium tin halide (CsSnX3, where X is halogen) perovskite nanocrystals (NCs) are one of the most representative alternatives to their lead-based cousins. However, a fundamental understanding of how to regulate the growth kinetics of colloidal CsSnX3 NCs is still lacking and, specifically, the role of surfactants in affecting their growth kinetics remains incompletely understood. Here we report a general approach for colloidal synthesis of CsSnX3 perovskite NCs through a judicious combination of capping agents. We demonstrate that introducing a small amount of zwitterionic phosphatidylcholine in the reaction is of vital importance for regulating the growth kinetics of CsSnX3 NCs, which otherwise merely leads to the formation of large-sized powders. Based on a range of experimental characterization, we propose that the formation of intermediate complexes between zwitterionic phosphatidylcholine and the precursors and the steric hindrance effect of branched fatty acid side-chains of phosphatidylcholine can regulate the growth kinetics of CsSnX3, which enables us to obtain CsSnX3 NCs with emission quantum yields among the highest values ever reported. Our finding of using zwitterionic capping agents to regulate the growth kinetics may inspire more research on the synthesis of high-quality tin-based perovskite NCs that could speed up their practical applications in optoelectronic devices.

Theory-Guided Synthesis of Highly Luminescent Colloidal Cesium Tin Halide Perovskite Nanocrystals.

The synthesis of highly luminescent colloidal CsSnX3 (X = halogen) perovskite nanocrystals (NCs) remains a long-standing challenge due to the lack of a fundamental understanding of how to rationally suppress the formation of structural defects that significantly influence the radiative carrier recombination processes. Here, we develop a theory-guided, general synthetic concept for highly luminescent CsSnX3 NCs. Guided by density functional theory calculations and molecular dynamics simulations, we predict that, although there is an opposing trend in the chemical potential-dependent formation energies of various defects, highly luminescent CsSnI3 NCs with narrow emission could be obtained through decreasing the density of tin vacancies. We then develop a colloidal synthesis strategy that allows for rational fine-tuning of the reactant ratio in a wide range but still leads to the formation of CsSnI3 NCs. By judiciously adopting a tin-rich reaction condition, we obtain narrow-band-emissive CsSnI3 NCs with a record emission quantum yield of 18.4%, which is over 50 times larger than those previously reported. Systematic surface-state characterizations reveal that these NCs possess a Cs/I-lean surface and are capped with a low density of organic ligands, making them an excellent candidate for optoelectronic devices without any postsynthesis ligand management. We showcase the generalizability of our concept by further demonstrating the synthesis of highly luminescent CsSnI2.5Br0.5 and CsSnI2.25Br0.75 NCs. Our findings not only highlight the value of computation in guiding the synthesis of high-quality colloidal perovskite NCs but also could stimulate intense efforts on tin-based perovskite NCs and accelerate their potential applications in a range of high-performance optoelectronic devices.

Antithermal Quenching of Luminescence in Zero-Dimensional Hybrid Metal Halide Solids.

Zero-dimensional (0D) hybrid metal halides have emerged as a new generation of luminescent phosphors owing to their high radiative recombination rates, which, akin to their three-dimensional cousins, commonly demonstrate thermal quenching of luminescence. Here, we report on the finding of antithermal quenching of luminescence in 0D hybrid metal halides. Using (C9NH20)2SnBr4 single crystals as an example system, we show that 0D metal halides can demonstrate antithermal quenching of luminescence. A combination of experimental characterizations and first-principles calculations suggests that antithermal quenching of luminescence is associated with trap states introduced by structural defects in (C9NH20)2SnBr4. Importantly, we find that antithermal quenching of luminescence is not only limited to (C9NH20)2SnBr4 but also exists in other 0D metal halides. Our work highlights the important role of defects in impacting photophysical properties of hybrid metal halides and may stimulate new efforts to explore metal halides exhibiting antithermal quenching of luminescence at higher temperatures.

[Performance of Polymer-based Titanium and Zirconium Oxides Composite Adsorbent for Simultaneous Removal of Phosphorus and Fluorine from Water].

A novel composite adsorbent (Ti-Zr-D201) for simultaneous removal of phosphate and fluoride from water was prepared by loading nanosized titanium and zirconium oxides on the anion exchange resin named D201. Combining with the characterization of the adsorbent, adsorption isotherm experiments, effect of solution pH experiments, competitive tests, kinetic experiments and fixed bed column adsorption experiments were performed to explore the adsorption performance and mechanism. The maximum adsorption capacity of Ti-Zr-D201 for phosphorus and fluorine was 34.9mg·g-1 and 35.1mg·g-1 respectively, when the pH value was 5.8 and the temperature was 308K. Adsorption behavior was spontaneous, and higher temperature was favorable for phosphorus and fluoride adsorption. The effect of pH on the adsorption of fluoride was more significant compared with the adsorption of phosphorus. SO42-, NO3- and Cl- were selected as the competitive ions for competition experiments, and the results indicated that Ti-Zr-D201 exhibited favorable sorption selectivity for phosphorus and fluoride compared with the host material D201. The fitting results of the internal diffusion model showed that there were two different adsorption stages before the adsorption equilibrium of Ti-Zr-D201. Column adsorption experiments showed that Ti-Zr-D201 had a stable structure, excellent dynamic adsorption performance, and could be recycled, which showed the potential of practical application.

[Breeding and identification of estrogen receptor beta gene knock-out mice].

OBJECTIVE: To breed estrogen receptor beta (ERbeta) gene knock-out female mice for studying postmenopausal osteoporotic fracture. METHODS: Three pairs of ERbeta gene knock-out mice were bred for 3 months, and 14 2-month-old female wild-type C57BL/6J mice with the same genetic background were paired at the ratio of 2:1 and mated with the male ERbeta gene knock-out homozygote mice. After further breeding to obtain sufficient number of mice, the genome DNA was extracted from the tail of the mice for genotyping by PCR. Ten 4-month-old female filial mice with ERbeta gene knock-out and 10 wild-type female mice were randomly selected and sacrificed, and the right proximal tibiae were removed and subjected to micro CT for measuring the parameters of trabecular bone histomorphometry. RESULTS: A total of 340 filial generation mice were reproduced in 2 months and genotypic identification revealed a proportion of ERbeta+ or + mice of 23.5%, ERbeta+ or - mice of 48.27 percent; and homozygous mutant (ERbeta- or -) mice of 28.3% (in which 54 were female). The MicroCT data revealed that the micro-architecture of the proximal tibiae was significantly different between ERbeta gene knock-out mice selected from the filial generation and wild type mice (P<0.05). CONCLUSION: It is feasible to breed ERbeta knock-out female mice by introducing female wild-type mice to pair and mate with ERbeta knock-out homozygote male mice. This approach allows breeding of sufficient number of female ERbeta knock-out mice as the animal models for studying the role of ERbeta.