Construction of Monolayer Ti3C2Tx MXene on Nickel Foam under High Electrostatic Fields for High-Performance Supercapacitors.

Ti3C2Tx MXene, as a common two-dimensional material, has a wide range of applications in electrochemical energy storage. However, the surface forces of few-layer or monolayer Ti3C2Tx MXene lead to easy agglomeration, which hinders the demonstration of its performance due to the characteristics of layered materials. Herein, we report a facile method for preparing monolayer Ti3C2Tx MXene on nickel foam to achieve a self-supporting structure for supercapacitor electrodes under high electrostatic fields. Moreover, the specific capacitance varies with the deposition of different-concentration monolayer Ti3C2Tx MXene on nickel foam. As a result, Ti3C2Tx/NF has a high specific capacitance of 319 mF cm-2 at 2 mA cm-2 and an excellent long-term cycling stability of 94.4% after 7000 cycles. It was observed that the areal specific capacitance increases, whereas the mass specific capacitance decreases with the increasing loading mass. Attributable to the effect of the high electrostatic field, the self-supporting structure of the Ti3C2Tx/NF becomes denser as the concentration of the monolayer Ti3C2Tx MXene ink increases, ultimately affecting its electrochemical performance. This work provides a simple way to overcome the agglomeration problem of few-layer or monolayer MXene, then form a self-supporting electrode exhibiting excellent electrochemical performance.

Induced effect of Ca2+ and Al3+ on chaetominine synthesis by Aspergillus fumigatus CY018 under submerged fermentation.

Chaetominine (CHA), an alkaloid with a biological activity obtained from Aspergillus fumigatus CY018, has strong anticancer activity against the human leukemia cells. However, its physiological and biochemical research is limited by CHA yield in the liquid-state fermentation, which is a problem that urgently needs effective biological solution. In this work, Ca2+ and Al3+ were found to have a strong promoting effect on CHA production after multiple metal ions screening. Then, the addition condition of Ca2+ and Al3+ was, respectively, optimized CHA production and dry cell weight. The intermediate metabolites were increased with coaddition of Ca2+ and Al3+ . The activities of key enzymes of DAHPs, AroAs, and TrpCs in the CHA biosynthesis pathway were improved by 3.58-, 3.60-, and 3.34-fold, respectively. Meanwhile, the transcription level of laeA, dahp, cs, and trpC was upregulated by 3.22-, 12.65-, 5.58-, and 6.99-fold, respectively, by coaddition of Ca2+ and Al3+ . Additionally, the fermentation strategy was successfully scaled up to a 5-L bioreactor, in which CHA production could attain 75.6 mg/L at 336 h. This work demonstrated that Ca2+ and Al3+ coaddition was an effective strategy for increasing CHA production, and the information obtained might be useful in the fermentation of filamentous fungi with the addition of metal ions.

Retracted Article: Structural characterization and anti-inflammatory potency of Mesobuthus martensii Karsch oligopeptides in lipopolysaccharide (LPS)-induced RAW264.7 macrophages.

Scorpion venom represents a significant source of bio-active peptides. However, the anti-inflammatory potency of scorpion venom oligopeptides (CMOs) has not been well explored. In the current study, thirty-five CMOs were isolated, the amino acid sequences were identified, and the anti-inflammatory potency was further explored in lipopolysaccharide (LPS)-induced RAW264.7 macrophages. The results showed that CMO-1 (His-Tyr-Gly-His) demonstrated the best anti-inflammatory potency by attenuating inflammatory cytokine (NO, TNF-α, IL-6, and IL-1ß) production. CMO-1 also inhibited IκBα degradation and p65 nuclear translocation and suppressed NF-κB activation. Moreover, CMO-1 inhibited the phosphorylation of ERK, JNK, and p38 MAPKs. It is worth noting that CMO-1 exhibited anti-inflammatory potency; thus, it is a potential anti-inflammatory agent.

Aqueous compatible boron nitride nanosheets for high-performance hydrogels.

Hexagonal boron nitride nanosheets (BNNSs) possess ultimate thermal and chemical stabilities and mechanical strengths. However, the unmodified BNNSs are hydrophobic and insoluble in water, which hinders their use in many technological areas requiring aqueous compatibility. In this work, h-BN was treated with molten citric acid to produce aqueous dispersible boron nitride sheets (ca-BNNSs). The resultant ca-BNNSs were used to fabricate ca-BNNS/polyacrylamide (i.e., BNNS2.5/PAAm) nanocomposite hydrogels, targeting high water retentivity and flexibility. The BNNS2.5/PAAm hydrogel (initially swollen in water) largely remained swollen (water content ∼94 wt%) even after one-year storage under ambient conditions. Importantly, the swollen BNNS2.5/PAAm hydrogel (water content ∼95 wt%) was highly flexible. Its elongation and compressive strength exceeded 10,000% and 8 MPa at 97% strain, respectively. Moreover, the aforementioned hydrogel recovered upon the removal of compression force, without obvious damage. The substantially improved water retentivity and flexibility revealed that BNNSs can serve as a promising new platform in the development of high-performance hydrogels.