RESUMO
Liquids confined down to the atomic scale can show radically new properties. However, only indirect and ensemble measurements operate in such extreme confinement, calling for novel optical approaches that enable direct imaging at the molecular level. Here we harness fluorescence originating from single-photon emitters at the surface of hexagonal boron nitride for molecular imaging and sensing in nanometrically confined liquids. The emission originates from the chemisorption of organic solvent molecules onto native surface defects, revealing single-molecule dynamics at the interface through the spatially correlated activation of neighbouring defects. Emitter spectra further offer a direct readout of the local dielectric properties, unveiling increasing dielectric order under nanometre-scale confinement. Liquid-activated native hexagonal boron nitride defects bridge the gap between solid-state nanophotonics and nanofluidics, opening new avenues for nanoscale sensing and optofluidics.
RESUMO
Nature provides a wide range of self-assembled structures from the nanoscale to the macroscale. Under the right thermodynamic conditions and with the appropriate material supply, structures like stalactites, icicles, and corals can grow. However, the natural growth process is time-consuming. This work demonstrates a fast, nature-inspired method for growing stalactite nanopores using heterogeneous atomic deposition of hafnium dioxide at the orifice of templated silicon nitride apertures. The stalactite nanostructures combine the benefits of reduced sensing region typically for 2-dimensional material nanopores with the asymmetric geometry of capillaries, resulting in ionic selectivity, stability, and scalability. The proposed growing method provides an adaptable nanopore platform for basic and applied nanofluidic research, including biosensing, energy science, and filtration technologies.
Assuntos
Técnicas Biossensoriais , Nanoporos , Fenômenos Físicos , Termodinâmica , Íons , Técnicas Biossensoriais/métodosRESUMO
Monitoring of structural changes in subcellular organelles is critical to evaluate the chemotherapeutic response of cells. However, commercial organelle selective fluorophores are easily photobleached, and thus are unsuitable for real-time and long-term observation. We have developed photostable carbon-dot liposomes (CDsomes)-based fluorophores for organellar and suborganellar imaging to circumvent these issues. The CDs synthesized through a mild pyrolysis/hydrolysis process exhibit amphipathic nature and underwent self-assembly to form liposome-like structures (CDsomes). The controlled hydrophilicity or hydrophobicity-guided preparation of CDsomes are used to selectively and rapidly (<1 min) stain nucleolus, cytoplasm, and membrane. In addition, the CDsomes offer universal high-contrast staining not only in fixed cells but also in living cells, allowing real-time observation and morphological identification in the specimen. The as-prepared CDsomes exhibit excitation-dependent fluorescence, and are much more stable under photoirradiation (e.g., ultraviolet light) than traditional subcellular dyes. Interestingly, the CDsomes can be transferred to daughter cells by diluting the particles, enabling multigenerational tracking of suborganelle for up to six generations, without interrupting the staining pattern. Therefore, we believe that the ultra-photostable CDsomes with high biocompatibility, and long-term suborganellar imaging capabilities, hold a great potential for screening and evaluating therapeutic performance of various chemotherapeutic drugs.
Assuntos
Técnicas Biossensoriais , Pontos Quânticos , Carbono/química , Corantes Fluorescentes/química , Organelas , Pontos Quânticos/químicaRESUMO
The liquid-phase exfoliation of semiconducting transition metal dichalcogenide (TMD) powders into 2D nanosheets represents a promising route toward the scalable production of ultrathin high-performance optoelectronic devices. However, the harsh conditions required negatively affect the semiconducting properties, leading to poor device performance. Herein we demonstrate a gentle exfoliation method employing standard bulk MoS2 powder (pressed into pellets) together with the electrochemical intercalation of a quaternary alkyl ammonium. The resulting nanosheets are produced in high yield (32%) and consist primarily of mono-, bi-, triatomic layers with large lateral dimensions (>1 µm), while retaining the semiconducting polymorph. Exceptional optoelectronic performance of nanosheet thin-films is observed, such as enhanced photoluminescence, charge carrier mobility (up to 0.2 cm2 V-1 s-1 in a multisheet device), and photon-to-current efficiency while maintaining high transparency (>80%). Specifically, as a photoanode for iodide oxidation, an internal quantum efficiency up to 90% (at +0.3 V vs Pt) is achieved (compared to only 12% for MoS2 nanosheets produced via ultrasonication). Further using a combination of fluorescence microscopy and high-resolution scanning transmission electron microscopy (STEM), we show that our gently exfoliated nanosheets possess a defect density (2.33 × 1013 cm-2) comparable to monolayer MoS2 prepared by vacuum-based techniques and at least three times less than ultrasonicated MoS2 nanoflakes. Finally, we expand this method toward other TMDs (WS2, WSe2) to demonstrate its versatility toward high-performance and fully scalable van der Waals heterojunction devices.
RESUMO
Surface-enhanced Raman spectroscopy (SERS) coupled with density functional theory (DFT) computations can characterise the adsorption orientation of a molecule on a nanoparticle surface. When using DFT to simulate SERS on a silver surface, one typically employs an atom (Ag), ion (Ag+), or cluster (Agx or Agx+) as the model surface. Here, by examining the nucleobase 2,6-diaminopurine (2,6-DAP) and then generalising our strategy to three other molecules, we show that employing silver oxide (Ag2O) as the model surface can quantitatively improve the accuracy of simulated SERS.
RESUMO
Transition metal dichalcogenides (TMDs) represent a class of semiconducting two-dimensional (2D) materials with exciting properties. In particular, defects in 2D-TMDs and their molecular interactions with the environment can crucially affect their physical and chemical properties. However, mapping the spatial distribution and chemical reactivity of defects in liquid remains a challenge. Here, we demonstrate large area mapping of reactive sulfur-deficient defects in 2D-TMDs in aqueous solutions by coupling single-molecule localization microscopy with fluorescence labeling using thiol chemistry. Our method, reminiscent of PAINT strategies, relies on the specific binding of fluorescent probes hosting a thiol group to sulfur vacancies, allowing localization of the defects with an uncertainty down to 15 nm. Tuning the distance between the fluorophore and the docking thiol site allows us to control Föster resonance energy transfer (FRET) process and reveal grain boundaries and line defects due to the local irregular lattice structure. We further characterize the binding kinetics over a large range of pH conditions, evidencing the reversible adsorption of the thiol probes to the defects with a subsequent transitioning to irreversible binding in basic conditions. Our methodology provides a simple and fast alternative for large-scale mapping of nonradiative defects in 2D materials and can be used for in situ and spatially resolved monitoring of the interaction between chemical agents and defects in 2D materials that has general implications for defect engineering in aqueous condition.
RESUMO
Different-sized carbon dots (CDs) with full-color emissions have immerse potentials as a novel class of light source in the field of light-emitting diodes (LED). However, few studies have been devoted to the development of the one-step process for preparing white-light-emitting CDs (WLECDs). Herein, we present a facile and one-pot synthesis of the WLECDs through microwave-assisted hydrothermal carbonization of poly(diallyldimethylammonium chloride) (PDDA). The as-synthesized WLECDs had a round shape with a mean particle size of 2.22â¯nm and their zeta potential reached up to 47â¯mV. Fourier transform infrared spectroscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy revealed the appearance of nitrogen and oxygen-containing functional groups on the CD surface, generating many surface state emissive traps. Additionally, photoluminescence spectroscopy showed that the CDs exhibited excitation-dependent surface-state emission and excitation-independent core-state emission. When excited at 350â¯nm, an aqueous solution of the WLECDs emitted white light with an absolute quantum yield of 11% and a correlated color temperature of 5999â¯K at Commission International de l'Eclairage (CIE) coordinates of (0.321, 0.348). Single-particle photoluminescence spectroscopy demonstrated that the WLECDs still possessed broadband white-light emission from 400 to 800â¯nm at a single particle level. Furthermore, a white-light-emitting polymer composite film excited by 365-nm UV light was fabricated by embedding the WLECDs into a polyvinyl alcohol matrix. This flexible solid-state film showed a correlated color temperature of 7023â¯K at CIE coordinates of (0.303, 0.332) and. Given that the WELCDs have highly positive charges, the fabrication of a white-light-illuminating film was successfully conducted by layer-by-layer assembly of the WELCD and poly(4-styrenesulfonic acid).
RESUMO
In this work, we report a highly sensitive colorimetric sensing strategy for cancer biomarker diagnosis using gold nanoparticles (AuNPs) labeled with biotinylated poly(adenine) ssDNA sequences and streptavidin-horseradish peroxidase for enzymatic signal enhancement. By adopting this DNA-AuNP nanoconjugate sensing strategy, we were able to eliminate the complicated and costly thiol-binding process typically used to modify AuNP surfaces with ssDNA. In addition, different antibodies can be introduced to the AuNP surfaced via electrostatic interactions to provide highly specific recognition sites for biomolecular sensing. Moreover, multiple, simultaneous tests can be rapidly performed with low sample consumption by incorporating these surface-modified AuNPs into a paper-based analytical device that can be read using just a smartphone. As a result of these innovations, we were able to achieve a detection limit of 10 pg/mL for a prostate specific antigen in a test that could be completed in as little as 15 min. These results suggest that the proposed paper platform possesses the capability for sensitive, high-throughput, and on-site prognosis in resource-limited settings.
Assuntos
Colorimetria/métodos , Ouro/química , Nanopartículas Metálicas/química , Neoplasias/diagnóstico , Papel , Animais , Anticorpos , Biomarcadores Tumorais/análise , DNA de Cadeia Simples , Peroxidase do Rábano Silvestre , Humanos , Smartphone , EstreptavidinaRESUMO
Carbon-dot (C-dot) liposome consisting of several thousands of C-dots shows interesting photoswitching properties. The water-dispersible C-dot liposome possesses intrinsic photoluminescence (PL) and is stable against salt and photoirradiation. The PL of C-dot liposome can be turned off and then on under photoirradiation over the wavelength regions of 510-540 nm and 365-420 nm, respectively. Like reported C-dots, the C-dot liposome emits various colors when excited at different wavelengths. Having great stability and high contrast, images of individual C-dot liposome have been recorded, showing negligible photoblinking. Through a simple photolithographic approach, micropatterns of C-dot liposomes emitting different colors have been fabricated.
RESUMO
This study describes a bottom-up assembly route for monodisperse carbon dots (CDs) into different sizes of CD aggregates through the control of the concentration of fatty acids. The highly monodisperse CDs were prepared via solvent-thermal treatment of edible soybean oil, which generated glycerol-based polymer as a carbon source and fatty acid as a surface capping in the synthetic process. The as-synthesized CDs exhibited small particle size variation (2.7 ± 0.2 nm) and narrow emission bands (full width at half-maximum <20 nm). The monodisperse CDs can self-assemble into blue-, green-, yellow-, and red-emitting CD aggregates by tuning the concentration of fatty acids. Compared to commercially available organic dyes and semiconductor quantum dots, the CD aggregates provided a 10-7000-fold improvement in brightness. Additionally, their emission wavelength was tunable across the entire visible spectrum by tuning the excitation wavelength. Because of their high brightness, fluorescence imaging of a single carbon dot and CD aggregate was simply achieved using filter-free dark-field fluorescence microscopy (DFM). We also demonstrate the use of filter-free DFM to dynamically image cellular uptake of the monodisperse CDs in MCF-7 cells and Huh-7 liver cancer cells. Without the conjugation of the fluorophore to the CDs, the particle aggregation-induced red-shifted emission enables the development of the CD-based ratiometric sensor for FeIII ions and pyrophosphate based on FeIII-induced aggregation of the monodisperse CDs.
Assuntos
Carbono/química , Corantes Fluorescentes/química , Ferro/metabolismo , Imagem Óptica/métodos , Pontos Quânticos/química , Transporte Biológico , Cor , Humanos , Células MCF-7 , Modelos Moleculares , Conformação Molecular , Solventes/química , TemperaturaRESUMO
3-Methyladenine and 7-methyladenine are biomarkers of DNA damage from exposure to methylating agents. For example, the concentration of 3-methyladenine increases significantly in the urine of cigarette smokers. Surface-enhanced Raman spectroscopy (SERS) has shown much potential for detection of biomolecules, including DNA. Much work has been dedicated to the canonical nucleobases, with comparatively fewer investigations of modified DNA and modified DNA nucleobases. Herein, Raman spectroscopy and SERS are used to examine the adsorption orientations of 3-methyladenine and 7-methyladenine on Ag nanoparticles. Density functional theory (DFT) calculations at the B3LYP level are used to support the conclusions via simulated spectra of the nucleobases and of Ag+/nucleobase complexes. The results herein show that 7-methyladenine adsorbs upright via its N3 and N9 atoms side, similarly to adenine. 3-Methyladenine adsorbs in a very tilted or flat orientation on the Ag nanoparticles. These findings will be useful for future SERS or other nanoparticle-based bioanalytical assays for detection of these methyladenines or other modified nucleobases.
Assuntos
Adenina/análogos & derivados , Biomarcadores/metabolismo , Fumar Cigarros/genética , Metilação de DNA/genética , Modelos Moleculares , Teoria Quântica , Análise Espectral Raman , Adenina/química , Adenina/metabolismo , Adsorção , Ouro/química , Nanopartículas Metálicas/química , Espectrofotometria Ultravioleta , Eletricidade Estática , TermodinâmicaRESUMO
We present a simple, one-pot approach for synthesizing ultrafine platinum (Pt) nanoclusters (NCs) under alkaline conditions using lysozyme (Lys) as a template. From the analysis of the nanoclusters by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry, Lys VI-stabilized Pt NCs majorly consisted of Pt4 clusters. The formation of Pt NCs was confirmed using X-ray photoelectron spectroscopy and Fourier-transformed infrared spectroscopy. The maximal fluorescence of Pt NCs appears at 434 nm with a quantum yield of 0.08, a fluorescence lifetime of 3.0 ns, and excitation-dependent emission wavelength behavior. Pt NCs exhibit an intrinsic oxidase-like activity because Pt NCs can catalyze O2 oxidation of organic substrates through a four-electron reduction process. Compared with larger Pt nanoparticles, the Pt NCs produce substantially greater catalytic activity in the O2-mediated oxidation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid), 3,3',5,5'-tetramethylbenzidine, and dopamine.
Assuntos
Nanopartículas Metálicas/química , Muramidase/química , Oxirredutases/metabolismo , Platina/química , Concentração de Íons de Hidrogênio , Nanotecnologia/métodos , Oxirredutases/químicaRESUMO
Core etching of gold nanoparticles (AuNPs) into smaller-sized clusters is a classic method for fabricating gold nanoclusters (AuNCs). The top down-based synthesis of AuNCs includes two steps: (i) reducing the Au(3+) precursor solution to generate AuNPs in the presence of protecting ligands and (ii) core etching of the formed AuNPs into the AuNCs via ligand exchange. For the first time, this paper describes a one-step approach for preparing AuNCs using a top down approach. The sinapinic acid (SA)-induced formation of the AuNCs involved a three-step reaction process. First, large AuNPs (>200 nm) were quickly formed after mixing SA and the Au(3+) precursor solution. Second, excess SA molecules self-assembled on the NP surface, and large AuNPs were etched to small AuNPs via electrostatic repulsion between the neighboring SA molecules. Finally, SA-induced core etching of the AuNPs resulted in the formation of the AuNCs within 70 min. Furthermore, we showed that the presence of the AuNCs in SA was capable of suppressing crystal growth and eliminating the coffee-ring effect. Thus, proteins can be successfully quantified using the SA-AuNCs as matrices for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. Compared with using SA as matrices, the SA-AuNCs offered substantial advantages for improving shot-to-shot reproducibility and enhancing the ionization efficiency of proteins.
Assuntos
Ácidos Cumáricos/química , Ouro/química , Nanopartículas Metálicas/química , Proteínas/química , Absorção , Acetonitrilas/química , Albuminas/química , Animais , Bovinos , Cloretos/química , Etanol/química , Compostos de Ouro/química , Cavalos , Insulina/química , Íons , Ligantes , Mioglobina/química , Nanotecnologia/métodos , Coelhos , Reprodutibilidade dos Testes , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por Matriz/métodos , Eletricidade EstáticaRESUMO
This paper presents a discussion of a one-pot approach for preparing lyszoyme type VI (Lys VI) stabilized clusters, including small (Au7Ag and Au8) and large (Au24Ag) clusters, for ratiometric fluorescence sensing of Hg(2+). Our previous study (Chen and Tseng, Small 8 (2012) 1912) showed the formation of intermediate Au8 clusters in the conversion of Au(+)-Lys VI protein complexes to Au25 clusters. The presence of Ag(+) in the precursor solution slowed this conversion, thereby forming two-sized clusters. With an increase in Ag(+) content, a systematic blue shift in the first exciton absorption and fluorescence peaks indicated the formation of Au-Ag bimetallic clusters. The prepared Ag(+)/Au(3+) molar ratio of 2:8 resulted in the formation of two-sized clusters, with dual emission bands centered at 471 and 613 nm. After these clusters are separated by a membrane filter, matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used to determine the composition of Au24Ag clusters. By monitoring the intensity ratio of the two emission wavelengths, the solution consisting of Hg(2+)-insensitive small clusters (Au7Ag and Au8) and Hg(2+)-sensitive Au24Ag clusters exhibited a ratiometric fluorescence response toward Hg(2+), and provided a built-in correction for photobleaching; the limit of detection at a signal-to-noise ratio of three for Hg(2+) was estimated to be 1 nM. This probe was successfully applied to ratiometric fluorescence sensing of Hg(2+) in tap water.
Assuntos
Água Potável/química , Ouro/química , Mercúrio/análise , Muramidase/química , Prata/química , Poluentes Químicos da Água/análise , Humanos , Limite de Detecção , Razão Sinal-Ruído , Espectrometria de Fluorescência , Espectrometria de Massas por Ionização e Dessorção a Laser Assistida por MatrizRESUMO
This study develops a novel and high performance colorimetric probe for dopamine (DA) detection. Aqueous-phase gold nanoparticles (AuNPs) extracted with 4-(dimethylamino)pyridine (DMAP) from toluene solvent are used as the reaction probes. The original AuNPs of diameter around 13 nm separate into 2-5 nm sizes when dopamine (DA) is added, resulting in the color change of the AuNP solution from red to blackish green. Transmission electron microscopy (TEM) observations and dynamic light scattering (DLS) tests show that the AuNPs break into their smaller sizes right after addition of DA. The results confirm that the DMAP capped AuNPs are etched by the DA molecules due to the strong affinity between DA and AuNPs, thus causing a blue shift in the absorption spectrum. The concentration of DA is quantitatively monitored by using a UV-Vis spectrometer with a limit of detection (LOD) as low as 5 nM. In addition, the results also show that the methods developed appear to have no significant problems in detecting DA in the sample even with the presence of (10 mM) common interferents such as ascorbic acid (AA), homovanillic acid (HVA), catechol (CA) and glutathione (GSH). The developed AuNP etching protocol for dopamine detection provides a novel and versatile approach for rapid biosensing applications.
Assuntos
Dopamina/análise , Ouro/química , Nanopartículas Metálicas/química , Espectrofotometria Ultravioleta , Ácido Ascórbico/química , Catecóis/química , Óxidos N-Cíclicos/química , Técnicas Eletroquímicas , Glutationa/química , Ácido Homovanílico/química , Tolueno/químicaRESUMO
This paper presents a one-pot approach for preparing highly fluorescent Au(8) clusters by reacting the Au(3+) precursor solution with lysozyme type VI (Lys VI) at pH 3. The fluorescence band of (Lys VI)-stabilized Au(8) clusters is centered at 455 nm on the excitation at 380 nm. Blue-emitting Au(8) clusters have a high quantum yield (â¼56%), two fluorescence lifetimes, and a rare amount of Au(+) on the surface of the Au core. When the pH of a solution of Au(8) clusters increases suddenly to 12, the Au(8) clusters gradually convert to Au(25) clusters over time. This conversion is also observed in the case of (Lys VI)-directed synthesis of Au(25) clusters at pH 12. The pH-induced conversion of Au(8) to Au(25) clusters suggests that the size of (Lys VI)-stabilized gold nanoclusters (AuNCs) relies on the secondary structure of Lys VI, which is susceptible to pH change. Based on these results and previous literature, this paper proposes the possible mechanism for growing (Lys VI)-stabilized Au(8) and Au(25) clusters. Additionally, (Lys VI)-stabilized Au(8) clusters could sense glutathione (GSH) through GSH-induced core-etching of Au(8) clusters; the limit of detection at a signal-to-noise ratio of 3 for GSH is determined to be 20 nm. Except for cysteine, the selectivity of (Lys VI)-stabilized Au(8) clusters for GSH over amino acids is remarkably high. The practicality of using Au(8) clusters to determine the concentration of GSH in a single drop of blood is also validated.