RESUMO
OBJECTIVE: To explore the main factors affecting early dental caries among preschool children aged 3-6 years in Xingtai City to formulate effective preventive measures. METHODS: A cross-sectional study was conducted on 570 preschool children aged 3-6 years in Xingtai City through questionnaire surveys and oral examinations to understand their dental caries situation. Multifactorial logistic regression analysis was used to analyse the main influencing factors for the occurrence of dental caries in preschool children. RESULTS: Univariate analysis showed statistically significant differences in age (χ2 = 2.636, p = 0.008), father's education level (χ2 = 4.207, p < 0.001), mother's education level (χ2 = 4.217, p < 0.001), daily tooth brushing frequency (χ2 = 3.160, p = 0.002), age of starting tooth brushing (χ2 = 8.756, p < 0.001), mouth rinsing after meals (χ2 = 89.401, p < 0.001), Streptococcus mutans positivity (χ2 = 133.503, p < 0.001), non-sweet snack consumption frequency (χ2 = 5.962, p < 0.001), snack flavour preference (χ2 = 116.119, p < 0.001), use of fluoridated toothpaste (χ2 = 75.639, p < 0.001), regular oral examinations (χ2 = 98.711, p < 0.001), sugary drink consumption frequency (χ2 = 10.370, p < 0.001) and sweet food consumption frequency (χ2 = 9.261, p < 0.001) between the caries and non-caries groups. Multifactorial analysis revealed that older age (odds ratio [OR] = 5.342, 95% confidence interval [CI]: 1.434-6.631), later initiation of tooth brushing (OR = 3.244, 95% CI: 2.413-5.424), S. mutans positivity (OR = 5.357, 95% CI: 4.529-8.563), high snack consumption frequency (OR = 3.452, 95% CI: 2.634-5.442), high sugary drink consumption frequency (OR = 4.414, 95% CI: 2.534-6.451) and high sweet food consumption frequency (OR = 4.531, 95% CI: 3.421-6.354) were risk factors for dental caries. Higher father's educational level (OR = 0.724, 95% CI: 0.564-0.891), higher mother's educational level (OR = 0.641, 95% CI: 0.601-0.813), high daily tooth brushing frequency (OR = 0.572, 95% CI: 0.423-0.864), mouth rinsing after meals (OR = 0.743, 95% CI: 0.643-0.813), use of fluoridated toothpaste (OR = 0.657, 95% CI: 0.553-0.931) and regular oral examinations (OR = 0.443, 95% CI: 0.352-0.747) were protective factors against dental caries (all p < 0.05). CONCLUSION: Multiple factors result in early dental caries in preschool children aged 3-6 years; however, the most influential factors are older age and high snack consumption, as well as high sugary and sweet food/drink consumption.
Assuntos
Cárie Dentária , Escovação Dentária , Humanos , Cárie Dentária/epidemiologia , Cárie Dentária/prevenção & controle , Pré-Escolar , Estudos Transversais , Masculino , Feminino , Criança , Escovação Dentária/estatística & dados numéricos , Fatores de Risco , Escolaridade , Lanches , Inquéritos e Questionários , Fatores Etários , Streptococcus mutans/isolamento & purificaçãoRESUMO
This work explores the effect of a Zn1-xSnxOy (ZTO) layer as a potential replacement for CdS in Sb2(S,Se)3 devices. Through the use of Afors-het software v2.5, it was determined that the ZTO/Sb2(S,Se)3 interface exhibits a lower conduction band offset (CBO) value of 0.34 eV compared to the CdS/Sb2(S,Se)3 interface. Lower photo-generated carrier recombination can be obtained at the interface of the ZTO/Sb2(S,Se)3 heterojunction. In addition, the valence band offset (VBO) value at the ZTO/Sb2(S,Se)3 interface increases to 1.55 eV. The ZTO layer increases the efficiency of the device from 7.56% to 11.45%. To further investigate the beneficial effect of the ZTO layer on the efficiency of the device, this goal has been achieved by five methods: changing the S content of the absorber, changing the thickness of the absorber, changing the carrier concentration of ZTO, using various Sn/(Zn+Sn) ratios in ZTO, and altering the thickness of the ZTO layer. When the S content in Sb2(S,Se)3 is around 60% and the carrier concentration is about 1018 cm-3, the efficiency is optimal. The optimal thickness of the Sb2(S,Se)3 absorber layer is 260 nm. A ZTO/Sb2(S,Se)3 interface with a Sn/(Zn+Sn) ratio of 0.18 exhibits a better CBO value. It is also found that a ZTO thickness of 20 nm is needed for the best efficiency.
RESUMO
Polymerization confined to the pore was first adapted for the nanoscale structure adjustment of adsorption resin. The self-cross-linked polymer (P-1) formed in the pore of hyper-cross-linked resin (HR) by the Friedel-Crafts reaction of p-dichloroxylene (p-DCX), occupying the macropore of the HR resin and bringing about an external micropore. Compared with the raw HR resin, the volume of the micropore of HR@P-1 in 0.4 < D < 1 nm increased but the volume of the macropore has obviously decreased. After the loading of P-1 in the nanopore of HR, HR@P-1 has better gas adsorption performance. At 298 and 100 KPa, the adsorption capacity of CO2 is almost 30% higher than that of HR, reaching 35.7 cm3/g, due to the increase in the smaller micropore volume. Moreover, HR@P-1 has also been found to be the first C2H6-selective adsorption resin. The uptake of C2H6 is up to 56 cm3/g, and the IAST selectivity of C2H6/CH4 reaches 15.3. HR@P-1 can also separate syngas efficiently at ambient temperature and be regenerated by simple vacuum operation.
RESUMO
Introduction: The use of controlled-release nitrogen (N) fertilizers has been shown to improve yield and N-use efficiency (NUE) in mechanical transplanted rice. However, the fertilizer requirements for mechanical direct-seeding rice differ from those for mechanical transplanted rice. The effects of controlled-release fertilizers on yield, NUE, and quality in mechanical direct-seeding rice are still unknown. Methods: Hybrid indica rice varieties Yixiangyou 2115 and Fyou 498 were used as test materials, and slow-mixed N fertilizer (120 kg hm-2) as a base (N1), N1+urea-N (30 kg hm-2) once as a base (N2), N1+urea-N (30 kg hm-2) topdressing at the tillering stage (N3), N1+urea-N (30 kg hm-2) topdressing at the booting stage (N4) four N fertilizer management to study their impact on the yield, NUE and quality of mechanical direct-seeding rice. Results and discussion: Compared with Yixiangyou 2115, Fyou 498 significantly increased photosynthetic potential, population growth rate, root vigor, and N transport rate by 3.34-23.88%. This increase further resulted in a significant improvement in the yield and NUE of urea-N topdressing by 1.73-5.95 kg kg-1. However, Fyou 498 showed a significant decrease in the head rice rate and taste value by 3.34-7.67%. All varieties were treated with N4 that significantly increase photosynthetic potential and population growth rate by 15.41-62.72%, reduce the decay rate of root vigor by 5.01-21.39%, promote the N transport amount in stem-sheaths (leaves) by 13.54-59.96%, and then significantly increase the yields by 4.45-20.98% and NUE of urea-N topdressing by 5.20-45.56 kg kg-1. Moreover, the rice processing and taste values were optimized using this model. Correlation analysis revealed to achieve synergistic enhancement of high-yield, high-quality, and high-NUE in rice, it is crucial to focus on increasing photosynthetic potential, population growth rate, and promoting leaf N transport. Specifically, increasing the contribution rate of N transport in stem-sheaths is the most important. These findings offer an effective N management strategy for 4R nutrient stewardship (right source, right method, right rate and right timing) of mechanical direct-seeding hybrid indica rice.
RESUMO
This randomized, controlled clinical trial compares the clinical performance of glass-fibre and resorbable polylactic acid (PLA) intracanal posts used to restore carious primary incisors in young patients. The study sample includes 180 primary upper central incisors of 90 children aged 3 to 4 years. All patients were randomly divided into two equal groups of 45 children who received PLA and glass-fibre (GFP) intracanal posts. The clinical assessment of incisor restorations was carried out immediately upon completion and at months 3, 6 and 12 according to the following criteria: anatomical form, marginal adaptation, surface roughness, marginal pigmentation, colour match, secondary caries and contact point. The Gingival Index (GI), the Bleeding Index (Cowell modification; mBI), and bite force (BF) were measured. At the 3-month follow-up, the occlusal BF of patients who received PLA posts was higher than the baseline; the GI and mBI scores were lower, by contrast (p < 0.05). This tendency was even more pronounced 6 and 12 months after the restoration. The incidence of side effects or symptoms (apical inflammation, cervical fracture, loosening of the crown) after the PLA posts was significantly lower than after the GFP (p < 0.05). No statistically significant differences were present between the two groups with respect to colour matching, anatomical form, marginal adaptation, marginal pigmentation, surface roughness, occlusal contact and secondary caries. Based on the results, applying PLA intracanal posts and cyanoacrylate to residual anterior crowns in young children can improve their gingival health, reduce side effects, and increase the likelihood of successful restoration.
Assuntos
Cárie Dentária , Técnica para Retentor Intrarradicular , Criança , Humanos , Pré-Escolar , Resinas Compostas/uso terapêutico , Incisivo , Coroas , Poliésteres , Cárie Dentária/tratamento farmacológico , Falha de Restauração Dentária , Restauração Dentária Permanente/métodosRESUMO
Background: The combined effect of hepatitis B virus infection and metabolic dysfunction-associated steatotic liver disease (MASLD) on hepatocellular carcinoma (HCC) risk remains unclear. The current study sought to elucidate the impact of MASLD on HCC progression in chronic hepatitis B (CHB) patients. Method: This retrospective cohort study included CHB patients who had undergone liver biopsy and abdominal imaging at the Guangdong Provincial Hospital of Chinese Medicine between 2013 and 2019. We investigated the correlation between MASLD and HCC risk, and inverse probability treatment weighting (IPTW) was used to adjust for patient characteristics. Results: A total of 1,613 patients were included, and 483 (29.9%) were diagnosed with MASLD. Over a median follow-up period of 5.02 years, 36 (2.2%) developed HCC, comprising 4.8% (23/483) of those with MASLD and 1.2% (13/1,130) of those without. Those with MASLD had a significantly higher cumulative incidence of HCC than those without (p < 0.001). The presence of MASLD was associated with a higher risk of HCC (adjusted hazard ratio [HR], 3.996; 95% confidence interval [CI], 2.007-7.959; p < 0.001). After adjustment using IPTW, the patients with MASLD retained a higher cumulative incidence of HCC (p < 0.001). Moreover, MASLD was found to be an independent risk factor for the development of HCC (adjusted HR, 10.191; 95% CI, 4.327-24.002; p < 0.001). However, among patients with MASLD, there were no significant differences in the cumulative risk of HCC between patients with and without overweight, between those with <2 and ≥2 cardiometabolic risk factors (CMRFs), between those with <3 and ≥3 CMRFs, or between those with <4 and ≥4 CMRFs (p = 0.110, p = 0.087, p = 0.066, and p = 0.490, respectively). Conclusion: The presence of MASLD is associated with a higher risk of HCC in patients with CHB. Notably, this higher risk is present in patients with MASLD, irrespective of the presence or absence of overweight or the number of CMRFs they have.
RESUMO
BACKGROUND AND PURPOSE: Glucose-to-glycated hemoglobin ratio (GAR) is considered a more reliable marker of stress hyperglycemia by correcting for basal blood glucose levels. This study aimed to investigate the extent to which GAR is associated with 3 month and 1 year all-cause mortalities in patients with acute ischemic stroke (AIS) undergoing mechanical thrombectomy (MT). METHODS: We retrospectively followed 553 AIS patients who underwent MT. The degree of stress hyperglycemia was quantified as the GAR, defined as fasting plasma glucose (mmol/L)/hemoglobin A1c (HbA1c) (%) on the second day after admission. According to the GAR quartiles, the patients were further categorized into four groups (group 1-group 4). We assessed the association between GAR and all-cause mortalities, clinical outcomes during hospitalization and function outcomes at 3 months. The associations between stress hyperglycemia and all-cause mortalities were analyzed using a Cox proportional-hazards model, while other outcomes were analyzed using multiple logistic regression analysis. RESULTS: The follow-up lasted a median of 18 months (range 0-66 months). The 3 month mortality rate was 9.58% (n = 53) and the 1 year mortality rate was 18.62% (n = 103). The Kaplan-Meier analysis revealed a significant inverse relationship between GAR and mortality (P < 0.001). In the Cox proportional-hazards model at 3 months, compared with group1, group 4 of GAR was associated with a significant increase in the risk of 3 month mortality (hazard ratio [HR] = 4.11, 95% confidence interval [CI] 1.41-12.0, P = 0.01) after adjusting for potential covariates. On multivariate logistic regression analysis, GAR was strongly associated with an increased risk of 3 month poor function outcome. CONCLUSIONS: Stress hyperglycemia, quantified by a higher GAR, is associated with all-cause mortality and poor functional outcomes in patients with AIS who undergo MT. Furthermore, GAR may contribute to improving the predictive efficiency of all-cause mortality in patients with AIS after MT, especially short-term all-cause mortality.
RESUMO
This study aims to experimentally compare the efficacy of different endodontic materials (iRoot BP Plus, Biodentine, MTA, Rootdent, and Trioxide) in the treatment of pulpitis and perforations on extracted tooth specimens. Additionally, the study aims to investigate the influence of iRoot BP Plus endodontic material on the regenerative processes following pulp amputation in laboratory animals. The secondary goal is to evaluate the effect of iRoot BP Plus on the restoration process in laboratory animals after pulp removal. The study presents a micropermeability analysis of the selected biomaterials performed on a sample of 50 single-rooted apical teeth in 2022. All teeth underwent endodontic treatment. Changes in molar morphology were investigated with eight laboratory animals (rabbits, 3 months old, all males) after simulated pulp removal and subsequent treatment with the iRoot BP Plus biomaterials. iRoot BP Plus appeared to be more effective in retrograde apical root filling than other biomaterials, as evidenced by its higher sealing effect. An experiment involving animal participants revealed the presence of protective adaptive mechanisms, which manifested in the form of an inflammatory process within 6 weeks after the dental pulp was removed. The connective tissue replaced the necrosis, and new capillaries began to form intensively. These dental outcomes suggest that iRoot BP Plus enables hermetical sealing in tooth restoration with good adhesion. Thus, it may have the ability to promote more active tissue regeneration after pulp removal.
Assuntos
Amputação Cirúrgica , Materiais Biocompatíveis , Silicatos , Animais , Masculino , Humanos , Coelhos , Lactente , Dente Molar , NecroseRESUMO
Abstract Objective This study aims to explore the regulatory mechanism of long noncoding RNA X inactive specific transcript (lncRNA XIST) in the odontogenic differentiation of human dental pulp stem cells (hDPSCs). hDPSCs were obtained from freshly extracted third molars and identified by flow cytometry. Methodology Odontogenic differentiation was induced in mineralized culture medium, and hDPSCs were infected with shRNA lentivirus targeting XIST or fused in sarcoma (FUS), followed by detection of alkaline phoshpatase (ALP) activity, alizarin red staining of mineralized nodules, Real-Time Quantitative Reverse Transcription PCR (qRT-PCR) quantification of XIST expression, and Western blot analysis of FUS, ZBTB16, and odontogenic differentiation markers (DSPP and DMP1). IF-FISH was performed to detect the cellular localization of XIST and FUS. RIP assay validated the XIST and FUS binding. ZBTB16 mRNA stability was tested after actinomycin D treatment. hDPSCs were infected with oe-ZBTB16 lentivirus and further treated with sh-XIST for a combined experiment. Results LncRNA XIST was highly expressed in hDPSCs with odontogenic differentiation. Downregulation of XIST or FUS weakened the ALP activity of hDPSCs, reduced mineralized nodules, diminished DSPP and DMP1 expressions. XIST binds to FUS to stabilize ZBTB16 mRNA and promote ZBTB16 expression. ZBTB16 overexpression partially reversed the inhibitory effect of XIST silencing on odontogenic differentiation of hDPSCs. Conclusion In conclusion, XIST stabilizes ZBTB16 mRNA and promotes ZBTB16 expression by binding to FUS, thereby facilitating the odontogenic differentiation of hDPSCs.
RESUMO
Ni-rich layered oxide materials exhibit great prospects for practical applications in lithium-ion batteries due to their high specific capacity. However, the poor cycling performance and suboptimal rate performance have caused obstacles for their widespread application. Herein, we developed a gradient Zr element doping method based on the bulk gradient concentration of Ni-rich layered oxide material to reinforce the cycle stability and rate performance of the cathode. In particular, the orientations of the gradient Zr doping were achieved via coprecipitation in a positive or negative correlation between the concentrations of Zr and Ni, and it was revealed that the material behaves better when the Zr content is abundant in the core. The gradient doping of Zr decreases the content of Ni2+ and mitigates the mixing degree of Li+ and Ni2+, implying the superior performance of doped cathode material. Compared with the bare sample (70.7%, 121.4 mAh g-1), the Zr-doped sample delivered a higher capacity retention of 85.6% after 300 cycles at 1C (1C = 180 mA g-1) and exhibited a considerable rate performance of 122.5 mAh g-1 at 20C. In particular, the Zr-doped cathodes performed dramatically on high rate cycling at 10C, with an initial capacity of 143.6 and 103.9 mAh g-1 after 300 cycles. Furthermore, the Zr-doped cathode delivered significant stability at a high potential of 4.5 V with a capacity retention of 72.1% after 300 cycles, while that of the bare sample was only 37.4%. The concept of gradient doping strategies during coprecipitation offers new insight into the design of advanced cathodes with excellent cycling stability and rate capability.
RESUMO
Microtubule-associated protein 1 light chain 3 (LC3) is an autophagy-associated gene, which is involved in the progression of a number of human malignancies. Such as Breast Cancer, Liver Cancer, and Lung Cancer. However, the role of LC3 in colorectal cancer (CC) remains to be fully elucidated. Therefore, the prognostic role of LC3 expression in CC was evaluated in the present study, with an emphasis on the clinicopathology and prognosis. Expression of LC3 in CC was examined using PubMed, Cochrane Library, Excerpta Medica Database, China Knowledge Infrastructure and Wanfang Data. Newcastle-Ottawa scale was used to screen the literature quality, and RevMan 5.4 and STATA 14.0 were used for the meta-analysis. A total of 1,689 patients from 10 studies were included in the present meta-analysis. The findings of the present study suggested that increased LC3 expression levels were associated with histological grade [odds ratio (OR)=0.91, 95% confidence interval (CI) (0.47, 1.77), P<0.001] and TNM stage [OR=0.91, 95% CI (0.47, 1.77), P<0.001], but were not associated with sex [OR=1.14, 95% CI (0.90, 1.51)], age [OR=0.89, 95% CI (0.67, 1.20)], tumor size [OR=0.78, 95% CI (0.30, 2.34)], histological grade [OR=0.82, 95% CI (0.43, 1.95)] and lymph node metastasis [OR=2.05, 95% CI (1.19, 3.60)] in CC. In addition, the increased expression of LC3 was revealed to be a prognostic factor for the overall survival of patients with CC. In conclusion, the autophagy-associated protein LC3 may be a prognostic indicator of human CC.
RESUMO
Given the high incidence of infection and the growing resistance of bacterial and viral infections to the traditional antiseptic, the need for novel antiseptics is critical. Therefore, novel approaches are urgently required to reduce the activity of bacterial and viral infections. Nanotechnology is increasingly being exploited for medical purposes and is of significant interest in eliminating or limiting the activity of various pathogens. Due to the increased surface-to-volume ratio of a given mass of particles, the antimicrobial properties of some naturally occurring antibacterial materials, such as zinc and silver, increase as particle size decreases into the nanometer regime. However, the physical structure of a nanoparticle and the way it interacts with and penetrates the bacteria also appear to provide unique bactericidal mechanisms. To measure the efficacy of nanoparticles (diameter 100 nm) as antimicrobial agents, it is necessary to comprehend the range of approaches for evaluating the viability of bacteria; each of them has its advantages and disadvantages. The nanotechnology-based disinfectants and sensors for SARS-CoV-2 provide a roadmap for creating more effective sensors and disinfectants for detecting and preventing coronaviruses and other infections. Moreover, there is an increasing role of nanotechnology-based approaches in various infections, including wound healing and related infection, nosocomial infections, and various bacterial infections. To meet the demand for patient care, nanotechnology-based disinfectants need to be further advanced with optimum approaches. Herein, we review the current burden of infectious diseases with a focus on SARS-CoV-2 and bacterial infection that significantly burdens developed healthcare systems and small healthcare communities. We then highlight how nanotechnology could aid in improving existing treatment modalities and diagnosis of those infectious agents. Finally, we conclude the current development and future perspective of nanotechnology for combating infectious diseases. The overall goal is to update healthcare providers on the existing role and future of nanotechnology in tackling those common infectious diseases.
RESUMO
This present study mainly focused on the investigation and optimization of the fermentation performance of oleaginous yeasts on Eucommia ulmoides Oliver hydrolysate (EUOH), which contains abundant and diverse sugars. More importantly, the impacts of the mixed strains fermentation compared with the single strain fermentation were analyzed and evaluated, through systematic investigations of substrate metabolism, cell growth, polysaccharide and lipid production, COD and ammonia-nitrogen removals. It was found that the mixed strains fermentation could effectively promote a more comprehensive and thorough utilization of the various sugars in EUOH, greatly improve COD removal effect, biomass and yeast polysaccharide production, but could not significantly improve the overall lipid content and ammonia nitrogen removal effect. In this study, when the two strains with the highest lipid content (i.e. L. starkeyi and R. toruloides) were mixed-cultured, the maximum lipid yield of 3.82 g/L was achieved, and the yeast polysaccharide yield, COD and ammonia-nitrogen removal rates of the fermentation (LS+RT) were 1.64 g/L, 67.4% and 74.9% respectively. When the strain with the highest polysaccharide content (i.e. R. toruloides) was mixed-cultured with the strains with strong growth activity (i.e. T. cutaneum and T. dermatis), a large amount of yeast polysaccharides could be obtained, which were 2.33 g/L (RT+TC) and 2.38 g/L (RT+TD) respectively. And the lipid yield, COD and ammonia-nitrogen removal rates of the fermentation (RT+TC), (RT+TD) were 3.09 g/L, 77.7%, 81.4% and 2.54 g/L, 74.9%, 80.4%, respectively.
Assuntos
Eucommiaceae , Fermentação , Amônia/metabolismo , Leveduras/metabolismo , Açúcares/metabolismo , LipídeosRESUMO
The efficient and economical removal of fermentation inhibitors from the complex system of biomass hydrolysate was one of the basics and keys in bio-chemical transformation. In this work, post-cross-linked hydrophilic-hydrophobic interpenetrating polymer networks (PMA/PS_pc IPNs and PAM/PS_pc IPNs) were proposed to remove fermentation inhibitors from sugarcane bagasse hydrolysate for the first time. PMA/PS_pc and PAM/PS_pc IPNs can obviously enhance the adsorption performance towards fermentation inhibitors due to their higher surface area and hydrophilic-hydrophobic synergetic surface properties, especially PMA/PS_pc IPNs has higher selectivity coefficients of 4.57, 4.63, 4.85, 16.0, 49.43, and 22.69, and higher adsorption capacity of 24.7 mg/g, 39.2 mg/g, 52.4 mg/g, 9.1 mg/g, 13.2 mg/g, and 144.9 mg/g towards formic acid, acetic acid, levulinic acid (LA), 5-hydroxymethylfurfural (HMF), furfural, and acid-soluble lignin (ASL), respectively, in a lower total sugar loss of 2.03%. The adsorption kinetics and isotherm of PMA/PS_pc IPNs were studied to elucidate its adsorption behavior towards fermentation inhibitors. In addition, the cyclic utilization property of PMA/PS_pc IPNs was stable. Synthesizing PMA/PS_pc IPNs is a new strategy to provide an efficient adsorbent for the removal of fermentation inhibitors from lignocellulosic hydrolysate.
Assuntos
Celulose , Saccharum , Celulose/metabolismo , Polímeros , Fermentação , Saccharum/química , HidróliseRESUMO
Accurate segmentation of retinal blood vessels is of great significance for diagnosing, preventing and detecting eye diseases. In recent years, the U-Net network and its various variants have reached advanced level in the field of medical image segmentation. Most of these networks choose to use simple max pooling to down-sample the intermediate feature layer of the image, which is easy to lose part of the information, so this study proposes a simple and effective new down-sampling method Pixel Fusion-pooling (PF-pooling), which can well fuse the adjacent pixel information of the image. The down-sampling method proposed in this study is a lightweight general module that can be effectively integrated into various network architectures based on convolutional operations. The experimental results on the DRIVE and STARE datasets show that the F1-score index of the U-Net model using PF-pooling on the STARE dataset improved by 1.98%. The accuracy rate is increased by 0.2%, and the sensitivity is increased by 3.88%. And the generalization of the proposed module is verified by replacing different algorithm models. The results show that PF-pooling has achieved performance improvement in both Dense-UNet and Res-UNet models, and has good universality.
Assuntos
Algoritmos , Vasos Retinianos , Processamento de Imagem Assistida por ComputadorRESUMO
Cane molasses is a by-product of sugar industry. It is widely used in fermentation field, but pigment compounds affect its further application. In this study, nonpolar hyper-cross-linked adsorption resins (HCARs) were synthesized by pendent vinyl groups cross-linking reaction, and were applied to decolorization of molasses. The correlation between the structure and the decolorization performance of HCARs was studied, and the results showed that the Brunauer-Emmett-Teller (BET) surface area and the pore volume of the resin significantly increased to 574.4 m2·g-1 and 1.40 cm3·g-1 after the Friedel-Crafts alkylation reaction with a catalyst dosage of 2.25% at 343 K for 7 h. Furthermore, the decolorization rate of molasses by the HCAR was 74%, and recycle decolorization performance of the resin was stable. The adsorption kinetics results showed that the pseudo-second-order dynamic model could more realistically reflect the decolorization mechanism of molasses on HCARs, and liquid film diffusion is the main rate-limiting step. The results of fixed-bed experiments show that D-ST-DVB resin has a good decolorization effect and recycling ability. Therefore, it is a feasible strategy for the decolorization of molasses with nonpolar HCAR.
Assuntos
Melaço , Poliestirenos , Poliestirenos/química , Bengala , FermentaçãoRESUMO
Autoimmune hepatitis (AIH) affects all age group and occurs mainly in women. Pyroptosis is a novel programmed cell death featured with cell bursting and release of proinflammatory cytokines. A deeper understanding of AIH pathogenesis will contribute to novel therapy for AIH patients. Here, we aimed to investigate the role of IL-17 in immune-mediated liver injury. The levels of cytokines were measured by ELISA, and mRNA levels of STAT3 and IFN gamma-inducible protein 16 (IFI16) were detected by PCR. Expressions of STAT3, IFI16, gasdermin D and cleaved caspase-1 were measured by western-blotting. Immunohistochemical staining and transmission electron microscopy were applied to evaluate liver histopathological changes of the treated mice. Our results showed that the levels of IFI16 was increased in hepatocytes treated with IL-17 protein, and further elevated after STAT3-overexpressed (STAT3-OE) lentivirus treatment. The levels of IFI16 were reduced in hepatocytes treated with IL-17 neutralizing Ab (nAb), but were significantly increased after STAT3-OE treatment. Pyroptosis was observed in hepatocytes treated with IL-17 protein, and further cell damage was observed after STAT3-OE lentivirus treatment. Liver damage was alleviated in mice treated with IL-17 nAb, however sever damage was experienced after STAT3-OE lentivirus treatment. A binding interaction between IFI16 and STAT3 was detected in IL-17 treated hepatocytes. Glutathione transaminase activity was enhanced in concanavalin A-induced AIH mice compared to the control group (p<0.01). IL-17 plays an important role in activating STAT3 and up-regulating IFI16, which may promote the pyroptosis in AIH-related liver injury through STAT3-IFI16 axis.
RESUMO
OBJECTIVE: To screen out potential biomarkers by analyzing fundamental nutrients in the bronchoalveolar lavage fluid (BALF) before confirming the lung cancer. METHODS: In this study, 44 patients were enrolled with clinical information. The concentrations of 23 amino acids and 35 carnitines in their BALF were detected with the high-performance liquid chromatography-mass spectrometry (HPLC-MS). Combined with clinicopathological diagnosis, the patients were divided into the lung cancer group (grades I & II and III & IV) and the non-cancer group for standard statistical analysis. RESULTS: The partial least squares-discriminant analysis (PLS-DA), the Shapiro-Wilk test, and the Bonferroni correction results showed that the serine concentration was higher and the butane-diacyl-carnitine (C4DC) concentration was lower in the lung cancer group, further showing the same changing trend continuously through the non-cancer stage, grades I & II stage and grades III & IV stage. Those two potential biomarkers have been identified. CONCLUSION: The HPLC-MS target detection in clinic for nutrient concentration levels is a promising technique to find the changing concentration of serine and C4DC in BALF, which provides an economical and practical way for early warning of lung cancer.
Assuntos
Carnitina , Neoplasias Pulmonares , Humanos , Aminoácidos , Líquido da Lavagem Broncoalveolar , SerinaRESUMO
BACKGROUND: Laparoscopic central hepatectomy (LCH) is a difficult and challenging procedure. This study aimed to describe our experience with LCH using a parenchymal-first approach. METHODS: Between July 2017 and June 2021, 19 consecutive patients underwent LCH using a parenchymal-first approach at our institution. Herein, the details of this procedural strategy are described, and the demographic and clinical data of the included patients were retrospectively analyzed. RESULTS: There were 1 female and 18 male patients, all with hepatocellular carcinoma without major vascular invasion. The mean age was 57 ± 10 years. No patients underwent conversion to open surgery, and no blood transfusions were needed intraoperatively. The average operative duration and the average Pringle maneuver duration were 223 ± 65 min and 58 ± 11 min. respectively. The median blood loss was 200 ml (range: 100-800 ml). Postoperative morbidities occurred in 3 patients (15.8%), including 2 cases of bile leakage and 1 case of acquired pulmonary infection; there were no postoperative complications happened such as bleeding, hepatic failure, or mortality. The average postoperative hospital stay was 10 ± 3 days. CONCLUSION: The optimized procedure of LCH using a parenchymal-first approach is not only feasible but also expected to provide an advantage in laparoscopic anatomical hepatectomy.