Na+ , K+ -ATPase participates in the protective mechanism of rat cerebral ischemia-reperfusion through the interaction with glutamate transporter-1.

Glutamate excitotoxicity in cerebral ischemia/reperfusion is an important cause of neurological damage. The aim of this study was to investigate the mechanism of Na+, K+-ATPase (NKA) involved in l ow concentration of ouabain (Oua, activating NKA)-induced protection of rat cerebral ischemia-reperfusion injury. The 2,3,5-triphenyltetrazolium chloride (TTC) staining and neurological deficit scores (NDS) were performed to evaluate rat cerebral injury degree respectively at 2 h, 6 h, 1 d and 3 d after reperfusion of middle cerebral artery occlusion (MCAO) 2 h in rats. NKA α1/α2 subunits and glutamate transporter-1 (GLT-1) protein expression were investigated by Western blotting. The cerebral infarct volume ratio were evidently decreased in Oua group vs MCAO/R group at 1 d and 3 d after reperfusion of 2 h MCAO in rats (*p ＜ 0.05 ). Moreover, NDS were not significantly different (p ＞ 0.05 ). NKA α1 was decreased at 6 h and 1 d after reperfusion of 2 h MCAO in rats, and was improved in Oua group. However, NKA α1 and α2 were increased at 3 d after reperfusion of 2 h MCAO in rats, and was decreased in Oua group. GLT-1 was decreased at 6 h, 1 d and 3 d after reperfusion of 2 h MCAO in rats, and was improved in Oua group. These data indicated that l ow concentration of Oua could improve MCAO/R injury through probably changing NKA α1/α2 and GLT-1 protein expression, then increasing GLT-1 function and promoting Glu transport and absorption, which could be useful to determine potential therapeutic strategies for patients with stroke. Low concentration of Oua improved rat MCAO/R injury via NKA α1/α2 and GLT-1.

Antithermal Quenching of Luminescence in Zero-Dimensional Hybrid Metal Halide Solids.

Zero-dimensional (0D) hybrid metal halides have emerged as a new generation of luminescent phosphors owing to their high radiative recombination rates, which, akin to their three-dimensional cousins, commonly demonstrate thermal quenching of luminescence. Here, we report on the finding of antithermal quenching of luminescence in 0D hybrid metal halides. Using (C9NH20)2SnBr4 single crystals as an example system, we show that 0D metal halides can demonstrate antithermal quenching of luminescence. A combination of experimental characterizations and first-principles calculations suggests that antithermal quenching of luminescence is associated with trap states introduced by structural defects in (C9NH20)2SnBr4. Importantly, we find that antithermal quenching of luminescence is not only limited to (C9NH20)2SnBr4 but also exists in other 0D metal halides. Our work highlights the important role of defects in impacting photophysical properties of hybrid metal halides and may stimulate new efforts to explore metal halides exhibiting antithermal quenching of luminescence at higher temperatures.

[The role of SPAG6/SPINK2 protein complex in the formation of sperm acrosome in mice].

OBJECTIVE: To explore the expression and regulatory function of sperm-associated antigen 6 (SPAG6) in the formation of the sperm acrosome in mice. METHODS: The expression of SPAG6 during the first wave of spermatogenesis on postnatal days (PN) 8, 12, 16, 20, 24, 28, 30 and 35 was examined by Western blot and the localization of SPAG6 in the testicular germ cells was determined by immunofluorescence. The expression plasmids of SPAG6 and serine protease inhibitor Kazal-type 2 (SPINK2) were constructed, the interaction between SPAG6 and SPINK2 in the AH109 and CHO cells examined by yeast two-hybrid and co-localization assays, and the expression and localization of SPINK2 in the testicular germ cells of the SPAG6-knockout (SPAG6 KO) mice detected by immunofluorescence. RESULTS: SPAG6 was highly expressed between PN 16 and 28 and localized in the acrosome of the round spermatids. Yeast two-hybrid assay showed the growth of SPAG6 and SPINK2 in the selective culture medium SD/-Leu/-Trp/-His, and the transfection of the CHO cells revealed the co-localization of SPAG6 and SPINK2 around the nuclei. The expression and acrosomal localization of SPINK2 were not found in the testicular germ cells of the SPAG6-KO mice. CONCLUSIONS: SPAG6 interacts with SPINK2 and probably participates in the formation of the sperm acrosome by stabilizing the expression of SPINK2 during spermatogenesis.

Doping-Enhanced Short-Range Order of Perovskite Nanocrystals for Near-Unity Violet Luminescence Quantum Yield.

All-inorganic perovskite nanocrystals (NCs) have emerged as a new generation of low-cost semiconducting luminescent system for optoelectronic applications. The room-temperature photoluminescence quantum yields (PLQYs) of these NCs in the green and red spectral range approach unity. However, their PLQYs in the violet are much lower, and an insightful understanding of such poor performance remains missing. We report a general strategy for the synthesis of all-inorganic violet-emitting perovskite NCs with near-unity PLQYs through engineering local order of the lattice by nickel ion doping. A broad range of experimental characterizations, including steady-state and time-resolved luminescence spectroscopy, X-ray absorption spectra, and magic angle spinning nuclear magnetic resonance spectra, reveal that the low PLQY in undoped NCs is associated with short-range disorder of the lattice induced by intrinsic defects such as halide vacancies and that Ni doping can substantially eliminate these defects and result in increased short-range order of the lattice. Density functional theory calculations reveal that Ni doping of perovskites causes an increase of defect formation energy and does not introduce deep trap states in the band gap, which is suggested to be the main reason for the improved local structural order and near-unity PLQY. Our ability to obtain violet-emitting perovskite NCs with near-perfect properties opens the door for a range of applications in violet-emitting perovskite-based devices such as light-emitting diodes, single-photon sources, lasers, and beyond.

Cs4PbBr6/CsPbBr3 Perovskite Composites with Near-Unity Luminescence Quantum Yield: Large-Scale Synthesis, Luminescence and Formation Mechanism, and White Light-Emitting Diode Application.

All-inorganic perovskites have emerged as a new class of phosphor materials owing to their outstanding optical properties. Zero-dimensional inorganic perovskites, in particular the Cs4PbBr6-related systems, are inspiring intensive research owing to the high photoluminescence quantum yield (PLQY) and good stability. However, synthesizing such perovskites with high PLQYs through an environment-friendly, cost-effective, scalable, and high-yield approach remains challenging, and their luminescence mechanisms has been elusive. Here, we report a simple, scalable, room-temperature self-assembly strategy for the synthesis of Cs4PbBr6/CsPbBr3 perovskite composites with near-unity PLQY (95%), high product yield (71%), and good stability using low-cost, low-toxicity chemicals as precursors. A broad range of experimental and theoretical characterizations suggest that the high-efficiency PL originates from CsPbBr3 nanocrystals well passivated by the zero-dimensional Cs4PbBr6 matrix that forms based on a dissolution-crystallization process. These findings underscore the importance in accurately identifying the phase purity of zero-dimensional perovskites by synchrotron X-ray technique to gain deep insights into the structure-property relationship. Additionally, we demonstrate that green-emitting Cs4PbBr6/CsPbBr3, combined with red-emitting K2SiF6:Mn4+, can be used for the construction of WLEDs. Our work may pave the way for the use of such composite perovskites as highly luminescent emitters in various applications such as lighting, displays, and other optoelectronic and photonic devices.

Controlling Crystallization of All-Inorganic Perovskite Films for Ultralow-Threshold Amplification Spontaneous Emission.

All-inorganic lead halide perovskites have gained considerable interest owing to their potential applications in an array of high-performance optoelectronic devices. However, producing highly luminescent, nearly pinhole-free, all-inorganic perovskite films through a simple solution process remains challenging. Here, we provide a detailed investigation of the crystallization control of inorganic perovskite films fabricated by a one-step spin-coating process. Our results reveal that the coating temperature in the fabrication process is of paramount importance in influencing perovskite crystallization and that lowering the coating temperature and fine stoichiometry modification of the precursors favor the suppression of trap states in CsPbBr3 perovskite films. A broad range of experimental characterizations help us identify that nonsynergistic assembly of solutes, resulting from poor diffusion capability of inorganic salts, is the dominant cause for the inhomogeneous element distribution, low luminescence yield, and poor surface coverage of the resulting films. Importantly, we find that polyethylene glycol can also be used for tailoring the crystallization process, which enables the attainment of high-quality CsPbBr3 films with a maximum luminescence yield of ∼30%. Finally, we demonstrate that amplification spontaneous emission with an ultralow threshold can be readily accomplished by using the developed film as an emissive component. Our findings provide deep insights into the crystallization control of CsPbBr3 perovskite films and establish a systematic route to high-quality all-inorganic perovskite films, paving the way for widespread optoelectronic applications.