Tailorable Multi-Modular Pore-Space-Partitioned Vanadium Metal-Organic Frameworks for Gas Separation.

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C2H2/CO2, C2H6/C2H4, and C3H8/C3H6. The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m2 g-1. With C2H2/CO2 selectivity from 3.3 to 11 and high uptake capacity for C2H2 from 65.2 to 182 cm3 g-1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C2H6 (166.8 cm3 g-1) contributes to the promise for C2H6-selective separation of C2H6/C2H4. The multi-module pore expansion enables transition from C3H6-selective to more desirable C3H8-selective separation with extraordinarily high C3H8 uptake (254.9 cm3 g-1) and high separation potential (1.25 mmol g-1) for C3H8/C3H6 (50:50 v/v) mixture.

Advancing Pore-Space-Partitioned Metal-Organic Frameworks with Isoreticular Cluster Concept.

Trigonal planar M3(O/OH) trimers are among the most important clusters in inorganic chemistry and are the foundational features of multiple high-impact MOF platforms. Here we introduce a concept called isoreticular cluster series and demonstrate that M3(O/OH), as the first member of a supertrimer series, can be combined with a higher hierarchical member (double-deck trimer here) to advance isoreticular chemistry. We report here an isoreticular series of pore-space-partitioned MOFs called M3M6pacs made from co-assembly between M3 single-deck trimer and M3x2 double-deck trimer. Important factors were identified on this multi-modular MOF platform to guide optimization of each module, which enables the phase selection of M3M6pacs by overcoming the formation of previously-always-observed same-cluster phases. The new pacs materials exhibit high surface area and high uptake capacity for CO2 and small hydrocarbons, as well as selective adsorption properties relevant to separation of industrially important mixtures such as C2H2/CO2 and C2H2/C2H4. Furthermore, new M3M6pacs materials show electrocatalytic properties with high activity.

Cyclobutanedicarboxylate Metal-Organic Frameworks as a Platform for Dramatic Amplification of Pore Partition Effect.

Ultrafine tuning of MOF structures at subangstrom or picometer levels can help improve separation selectivity for gases with subtle differences. However, for MOFs with a large enough pore size, the effect from ultrafine tuning on sorption can be muted. Here we show an integrative strategy that couples extreme pore compression with ultrafine pore tuning. This strategy is made possible by unique combination of two features of the partitioned acs (pacs) platform: multimodular framework and exceptional tolerance toward isoreticular replacement. Specifically, we use one module (ligand 1, L1) to shrink the pore size to an extreme minimum on pacs. A compression ratio of about 30% was achieved (based on the unit cell c/a ratio) from prototypical 1,4-benzenedicarboxylate-pacs to trans-1,3-cyclobutanedicarboxylate-pacs. This is followed by using another module (ligand 2, L2) for ultrafine pore tuning (<3% compression). This L1-L2 strategy increases the C2H2/CO2 selectivity from 2.6 to 20.8 and gives rise to an excellent experimental breakthrough performance. As the shortest cyclic dicarboxylate that mimics p-benzene-based moieties using a bioisosteric (BIS) strategy on pacs, trans-1,3-cyclobutanedicarboxylate offers new opportunities in MOF chemistry.

Multi-Modular Design of Stable Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation Applications.

Pore space partition (PSP) is an effective materials design method for developing high-performance small-pore materials for storage and separation of gas molecules. The continued success of PSP depends on broad availability and judicious choice of pore-partition ligands and better understanding of each structural module on stability and sorption properties. Here, by using substructural bioisosteric strategy (sub-BIS), a dramatic expansion of pore-partitioned materials is targeted by using ditopic dipyridyl ligands with non-aromatic cores or extenders, as well as by expanding heterometallic clusters to uncommon nickel-vanadium and nickel-indium clusters rarely known before in porous materials. The dual-module iterative refinement of pore-partition ligands and trimers leads to remarkable enhancement of chemical stability and porosity. Here a family of 23 pore-partitioned materials synthesized from five pore-partition ligands and seven types of trimeric clusters is reported. New materials with such compositionally and structurally diverse framework modules reveal key factors that dictate stability, porosity, and gas separation properties. Among these, materials based on heterometallic vanadium-nickel trimeric clusters give rise to the highest long-term hydrolytic stability and remarkable uptake capacity for CO2 , C2 H2 /C2 H4 /C2 H6 , and C3 H6 /C3 H8 hydrocarbon gases. The breakthrough experiment shows the potential application of new materials for separating gas mixtures such as C2 H2 /CO2 .

Simultaneous Control of Flexibility and Rigidity in Pore-Space-Partitioned Metal-Organic Frameworks.

Flexi-MOFs are typically limited to low-connected (<9) frameworks. Here we report a platform-wide approach capable of creating a family of high-connected materials (collectively called CPM-220) that integrate exceptional framework flexibility with high rigidity. We show that the multi-module nature of the pore-space-partitioned pacs (partitioned acs net) platform allows us to introduce flexibility as well as to simultaneously impose high rigidity in a tunable module-specific fashion. The inter-modular synergy has remarkable macro-morphological and sub-nanometer structural impacts. A prominent manifestation at both length scales is the retention of X-ray-quality single crystallinity despite huge hexagonal c-axial contraction (≈ 30%) and harsh sample treatment such as degassing and sorption cycles. CPM-220 sets multiple precedents and benchmarks on the pacs platform in both structural and sorption properties. They possess exceptionally high benzene/cyclohexane selectivity, unusual C3H6 and C3H8 isotherms, and promising separation performance for small gas molecules such as C2H2/CO2.

Solvent-free Synthesis of Multi-Module Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation.

Multi-module design of framework materials with multiple distinct building blocks has attracted much attention because such materials are more amenable to compositional and geometrical tuning and thus offer more opportunities for property optimization. Few examples are known that use environmentally friendly and cost-effective solvent-free method to synthesize such materials. Here, we report the use of solvent-free method (also modulator-free) to synthesize a series of multi-module MOFs with high stability and separation property for C2 H2 /CO2 . The synthesis only requires simple mixing of reactants and short reaction time (2 h). Highly porous and stable materials can be made without any post-synthetic activation. The success of solvent-free synthesis of multi-module MOFs reflects the synergy between different modules, resulting in stable pore-partitioned materials, despite the fact that other competitive crystallization pathways with simpler framework compositions also exist.

Concurrent Enhancement of Acetylene Uptake Capacity and Selectivity by Progressive Core Expansion and Extra-Framework Anions in Pore-Space-Partitioned Metal-Organic Frameworks.

A multi-stage core-expansion method is proposed here as one component of the integrative binding-site/extender/core-expansion (BEC) strategy. The conceptual deconstruction of the partitioning ligand into three editable parts draws our focus onto progressive core expansion and allows the optimization of both acetylene uptake and selectivity. The effectiveness of this strategy is shown through a family of eight cationic pore-partitioned materials containing three different partitioning ligands and various counter anions. The optimized structure, Co3 -cpt-tph-Cl (Hcpt=4-(p-carboxyphenyl)-1,2,4-triazole, H-tph=(2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene) with the largest surface area and highest C2 H2 uptake capacity (200 cm3 /g at 298 K), also exhibits (desirably) the lowest CO2 uptake and hence the highest C2 H2 /CO2 selectivity. The successful boost in both C2 H2 capacity and IAST selectivity allows Co3 -cpt-tph-Cl to rank among the best crystalline porous materials, ionic MOFs in particular, for C2 H2 uptake and C2 H2 /CO2 experimental breakthrough separation.

Developing Water-Stable Pore-Partitioned Metal-Organic Frameworks with Multi-Level Symmetry for High-Performance Sorption Applications.

A new perspective is proposed in the design of pore-space-partitioned MOFs that is focused on ligand symmetry properties sub-divided here into three hierarchical levels: 1) overall ligand, 2) ligand substructure such as backbone or core, and 3) the substituent groups. Different combinations of the above symmetry properties exist. Given the close correlation between nature of chemical moiety and its symmetry, such a unique perspective into ligand symmetry and sub-symmetry in MOF design translates into the influences on MOF properties. Five new MOFs have been prepared that exhibit excellent hydrothermal stability and high-performance adsorption properties with potential applications such as C3 H6 /C2 H4 and C2 H2 /CO2 selective adsorption. The combination of high stability with high benzene/cyclohexane selectivity of ≈13.7 is also of particular interest.

Cobalt-Nickel Layered Double Hydroxides on Electrospun MXene for Superior Asymmetric Supercapacitor Electrodes.

Flexible electrodes for energy storage and conversion require a micro-nanomorphology and stable structure. Herein, MXene fibers (MX-CNF) are fabricated by electrospinning, and Co-MOF nanoarrays are prepared on the fibers to form Co-MOF@MX-CNF. Hydrolysis and etching of Co-MOF@MX-CNF in the Ni2+ solution produce cobalt-nickel layered double hydroxide (CoNi-LDH). The CoNi-LDH nanoarrays on the MX-CNF substrate have a large specific surface area and abundant electrochemical active sites, thus ensuring effective exposure of the CoNi-LDH active materials to the electrolyte and efficient pseudocapacitive energy storage and fast reversible redox kinetics for enhanced charging-discharging characteristics. The CoNi-LDH@MX-CNF electrode exhibits a discharge capacity of 996 F g-1 at a current density of 1 A g-1 as well as 78.62% capacitance retention after 3,000 cycles at 10 A g-1. The asymmetric supercapacitor (ASC) comprising the CoNi-LDH@MX-CNF positive electrode and negative activated carbon electrode shows an energy density of 48.4 Wh kg-1 at a power density of 499 W kg-1 and a capacity retention of 78.9% after 3,000 cycles at a current density of 10 A g-1. Density-functional theory calculations reveal the charge density difference and partial density of states of CoNi-LDH@MX-CNF confirming the large potential of the CoNi-LDH@MX-CNF electrode in energy storage applications.

Optimization of Pore-Space-Partitioned Metal-Organic Frameworks Using the Bioisosteric Concept.

Pore space partitioning (PSP) is methodically suited for dramatically increasing the density of guest binding sites, leading to the partitioned acs (pacs) platform capable of record-high uptake for CO2 and small hydrocarbons such as C2Hx. For gas separation, achieving high selectivity amid PSP-enabled high uptake offers an enticing prospect. Here we aim for high selectivity by introducing the bioisosteric (BIS) concept, a widely used drug design strategy, into the realm of pore-space-partitioned MOFs. New pacs materials have high C2H2/CO2 selectivity of up to 29, high C2H2 uptake of up to 144 cm3/g (298 K, 1 atm), and high separation potential of up to 5.3 mmol/g, leading to excellent experimental breakthrough performance. These metrics, coupled with exceptional tunability, high stability, and low regeneration energy, demonstrate the broad potential of the BIS-PSP strategy.

Metal-Mediated Directional Capping of Rod-Packing Metal-Organic Frameworks.

Two new rod-packing metal-organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn2+ with a stronger Lewis acidic Co2+ , leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.

Simultaneous Control of Pore-Space Partition and Charge Distribution in Multi-Modular Metal-Organic Frameworks.

We report here a strategy for making anionic pacs type porous materials by combining pore space partition with charge reallocation. The method uses the first negatively charged pore partition ligand (2,5,8-tri-(4-pyridyl)-1,3,4,6,7,9-hexaazaphenalene, H-tph) that simultaneously enables pore partition and charge reallocation. Over two dozen anionic pacs materials have been made to demonstrate their excellent chemical stability and a high degree of tunability. Notably, Ni3 -bdt-tph (bdt=1,4-benzeneditetrazolate) exhibits month-long water stability, while CoV-bdt-tph sets a new benchmark for C2 H2 storage capacity under ambient conditions for ionic MOFs. In addition to tunable in-framework modules, we show feasibility to tune the type and concentration of extra-framework counter cations and their influence on both stability and capability to separate industrial C3 H8 /C3 H6 and C6 H6 /C6 H12 mixtures.

Analysis of Bubble Growth in Supercritical CO2 Extrusion Foaming Polyethylene Terephthalate Process Based on Dynamic Flow Simulation.

Bubble growth in the polymer extrusion foaming process occurs under a dynamic melt flow. For non-Newtonian fluids, this work successfully coupled the dynamic melt flow simulation with the bubble growth model to realize bubble growth predictions in an extrusion flow. The initial thermophysical properties and dynamic rheological property distribution at the cross section of the die exit were calculated based on the finite element method. It was found that dynamic rheological properties provided a necessary solution for predicting bubble growth during the supercritical CO2 polyethylene terephthalate (PET) extrusion foaming process. The introduction of initial melt stress could effectively inhibit the rapid growth of bubbles and reduce the stable size of bubbles. However, the initial melt stress was ignored in previous work involving bubble growth predictions because it was not available. The simulation results based on the above theoretical model were consistent with the evolution trends of cell morphology and agreed well with the actual experimental results.

Insight into the Influence of Properties of Poly(Ethylene-co-octene) with Different Chain Structures on Their Cell Morphology and Dimensional Stability Foamed by Supercritical CO2.

Poly(ethylene-co-octene) (POE) elastomers with different copolymer compositions and molecular weight exhibit quite distinctive foaming behaviors and dimensional stability using supercritical carbon dioxide (CO2) as a blowing agent. As the octene content decreases from 16.54% to 4.48% with constant melting index of 1, both the melting point and crystallinity of POE increase, due to the increase in fraction of ethylene homo-polymerization segment. the foaming window of POE moves to a narrow higher temperature zone from 20-50 °C to 90-110 °C under 11 Mpa CO2 pressure, and CO2 solubility as well as CO2 desorption rate decrease, so that the average cell diameter becomes larger. POE foams with higher octene content have more serious shrinkage problem due to lower compression modulus, weaker crystal structure and higher CO2 permeability. As POE molecular weight increases at similar octene content, there is little effect on crystallization and CO2 diffusion behavior, the foaming window becomes wider and cell density increases, mainly owing to higher polymer melt strength, the volume shrinkage ratio of their foams is less than 20% because of similar higher polymer modulus. In addition, when the initiate expansion ratio is over 17 times, POE foams with longer and thinner cell wall structures are more prone to shrinkage and recovery during aging process, due to more bending deformation and less compression deformation.

Author Correction: A new treatment strategy for end-stage hepatic alveolar echinococcosis: IVC resection without reconstruction.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Retraction Note: The diagnostic nomogram of platelet-based score models for hepatic alveolar echinococcosis and atypical liver cancer.

Editor's Note: this Article has been retracted; the Retraction Note is available at https://www.nature.com/articles/s41598-020-73758-x.

The diagnostic nomogram of platelet-based score models for hepatic alveolar echinococcosis and atypical liver cancer.

Hepatic alveolar echinococcosis (HAE) and liver cancer had similarities in imaging results, clinical characteristics, and so on. And it is difficult for clinicians to distinguish them before operation. The aim of our study was to build a differential diagnosis nomogram based on platelet (PLT) score model and use internal validation to check the model. The predicting model was constructed by the retrospective database that included in 153 patients with HAE (66 cases) or liver cancer (87 cases), and all cases was confirmed by clinicopathology and collected from November 2011 to December 2018. Lasso regression analysis model was used to construct data dimensionality reduction, elements selection, and building prediction model based on the 9 PLT-based scores. A multi-factor regression analysis was performed to construct a simplified prediction model, and we added the selected PLT-based scores and relevant clinicopathologic features into the nomogram. Identification capability, calibration, and clinical serviceability of the simplified model were evaluated by the Harrell's concordance index (C-index), calibration plot, receiver operating characteristic curve (ROC), and decision curve. An internal validation was also evaluated by the bootstrap resampling. The simplified model, including in 4 selected factors, was significantly associated with differential diagnosis of HAE and liver cancer. Predictors of the simplified diagnosis nomogram consisted of the API index, the FIB-4 index, fibro-quotent (FibroQ), and fibrosis index constructed by King's College Hospital (King's score). The model presented a perfect identification capability, with a high C-index of 0.929 (0.919 through internal validation), and good calibration. The area under the curve (AUC) values of this simplified prediction nomogram was 0.929, and the result of ROC indicated that this nomogram had a good predictive value. Decision curve analysis showed that our differential diagnosis nomogram had clinically identification capability. In conclusion, the differential diagnosis nomogram could be feasibly performed to verify the preoperative individualized diagnosis of HAE and liver cancer.

Interfering cellular lactate homeostasis overcomes Taxol resistance of breast cancer cells through the microRNA-124-mediated lactate transporter (MCT1) inhibition.

BACKGROUND: Breast cancer, the most common invasive cancer of women, is a malignant neoplasm and the second main cause of cancer death. Resistance to paclitaxel (Taxol), one of the frequently used chemotherapy agents for breast cancer, presents a major clinical challenge. Recent studies revealed that metabolic alterations of cancer cells play important roles in chemo-resistance. MATERIALS AND METHODS: In this study, Human breast cancer cells, BT474, SKBR3 and MCF7 were used to study the causal relationship between the lactate exporter, MCT1 (SLC16A1)-modulated glucose metabolism and Taxol resistance of breast cancer cells. Taxol resistant breast cancer cells were established. The intracellular lactate and extracellular lactate levels as well glucose uptake and oxygen consumption were measured. MicroRNA-124 expressions were detected by qRT-PCR from both breast cancer patient samples and breast cancer cells. Target of miR-124 was predicted and verified by Western blot and luciferase assay. An xenograft mice model was established and evaluated for the in vivo tumor therapeutic effects of MCT1 inhibitor plus microRNA-124 treatments. RESULTS: Low toxic Taxol treatments promoted cellular glucose metabolism and intracellular lactate accumulation with upregulated lactate dehydrogenase-A (LDHA) and MCT1 expressions. By establishing Taxol resistant breast cancer cell line, we found Taxol resistant cells exhibit upregulated LDHA and MCT1 expressions. Furthermore, glucose consumption, lactate production and intracellular ATP were elevated in Taxol resistant MCF7 cells compared with their parental cells. The miR-124, a tumor suppressive miRNA, was significantly downregulated in Taxol resistant cells. Luciferase assay and q-RT-PCR showed MCT1 is a direct target of miR-124 in both breast cancer cell lines and patient specimens. Moreover, co-treatment of breast cancer cells with either MCT1 inhibitor or miR-124 plus Taxol led to synergistically cytotoxic effects. Importantly, based on in vitro and in vivo results, inhibition of MCT1 significantly sensitized Taxol resistant cells. Finally, rescue experiments showed restoration of MCT1 in miR-124 overexpressing cells promoted Taxol resistance. CONCLUSIONS: This study reveals a possible role of miRNA-214-mediated Taxol resistance, contributing to identify novel therapeutic targets against chemoresistant breast cancers.

A new treatment strategy for end-stage hepatic alveolar echinococcosis: IVC resection without reconstruction.

Patients with hepatic alveolar echinococcosis (HAE) infringing on the inferior vena cava (IVC) have a poor prognosis when radical resection cannot be performed because curative resection is limited by IVC reconstruction. There is little information concerning combined resection of the liver and the IVC. This study explored a novel treatment method for HAE infringing on the IVC and evaluated the safety and feasibility of combined resection of the liver and the IVC. A total of 13 patients were treated with liver resection combined with IVC resection for end-stage HAE between January 2016 and July 2018 at the Affiliated Hospital of Qinghai University. The demographic, clinical, and follow-up data were collected and analysed. The 13 patients underwent resection of the IVC without reconstruction. Of these, 3 exhibited oedema of both lower limbs and the scrotum (23.1%), 2 exhibited pneumothorax (15.4%), 1 exhibited bile leakage (7.7%), 1 exhibited bacteraemia (7.7%), and 1 developed abdominal haemorrhage that was stopped with conservative treatment (7.7%). There was 1 case of operation-related mortality because of upper gastrointestinal haemorrhage (7.7%), and no patients developed recurrence or had residual lesions. Liver resection combined with IVC resection is effective and feasible for patients with HAE infringing on the IVC.

Atomic-Level Characterization of Dynamics of a 3D Covalent Organic Framework by Cryo-Electron Diffraction Tomography.

Understanding the dynamics of covalent organic frameworks (COFs) is desirable for developing smart materials with coherent responses to external stimulus. Here we illustrate the structural determination of dynamics at atomic level by cryo-electron diffraction tomography (EDT) with single crystals of COF-300 having only submicrometer sizes. We observe and elucidate the crystal contraction upon H2O adsorption by ab initio structural solution of all non-hydrogen atoms of framework and unambiguous location of guest molecules in the pores. We also observe the crystal expansion of COF-300 upon inclusion of ionic liquid or polymer synthesized in the channels, whose conformational aspects of frameworks can be confirmed.