Research on the Technological Progress of CZT Array Detectors.

CdZnTe (CZT) is a new type of compound semiconductor that has emerged in recent years. Compared to other semiconductor materials, it possesses an ideal bandgap, high density, and high electron mobility, rendering it an excellent room-temperature composite semiconductor material for X-ray and γ-ray detectors. Due to the exceptional performance of CZT material, detectors manufactured using it exhibit high energy resolution, spatial resolution, and detection efficiency. They also have the advantage of operating at room temperature. CZT array detectors, furthermore, demonstrate outstanding spatial detection and three-dimensional imaging capabilities. Researchers worldwide have conducted extensive studies on this subject. This paper, building upon this foundation, provides a comprehensive analysis of CZT crystals and CZT array detectors and summarizes existing research to offer valuable insights for envisioning new detector methodologies.

A simulation study on enhancing sterilization efficiency in medical plastics through gamma radiation optimization.

Gamma radiation is progressively emerging as an effective method to enhance the sterilization efficiency of medical plastics including Polyvinyl chloride (PVC). The parameters of the radiation facility will affect the efficiency of radiation sterilization. To investigate these effects, we simulate the gamma radiation sterilization performance of PVC material sample using Monte Carlo Method. The simulation results indicated that compared with the sterilization time of 20-90 min from high-temperature steam sterilization of medical waste, by optimizing the parameters of the model radiation facility, the radiation sterilization time can be reduced to 6.61 min. The optimized model facility parameters are as follows: the gamma photon energy is 1.25 MeV, the model space is 300 × 300 × 300 cm3, the reflective layer material is concrete and its thickness is 8 cm, the PVC sample layer area is 100 × 100 cm2, the distance between the radiation source and the PVC sample layer is 150 cm, the energy deposition in the bottom layer of the PVC sample layer is 1.31315 × 10-6 MeV/g. This study offers a potentially feasible way for PVC sterilization, while also providing a crucial reference for the further promotion and application of radiation sterilization technology.

Standoff alpha radiation measurement of surface contamination based on radioluminescence.

An effective standoff alpha radiation measurement of surface contamination method is of great importance in radioactive waste disposal and decommissioning of nuclear facilities, nuclear accident emergency response and nuclear security. Here, we build an optical system for the implementation of standoff alpha radiation measurement based on radioluminescence. We present the results of the detection efficiency calibrating of standoff alpha radioactive sources using simulation and experiment. At the same time, a numerical integration-based surface contamination measurement method is designed, computed, and validated through experiments and simulations. Finally, the minimum detectable surface activity of the method is given for different measurement conditions.

First-Principles Study on Mechanical and Optical Behavior of Plutonium Oxide under Typical Structural Phases and Vacancy Defects.

The chemical corrosion aging of plutonium is a very important topic. It is easy to be corroded and produces oxidation products of various valence states because of its 5f electron orbit between local and non-local. On the one hand, the phase diagram of plutonium and oxygen is complex, so there is still not enough research on typical structural phases. On the other hand, most of the studies on plutonium oxide focus on PuO2 and Pu2O3 with stoichiometric ratio, while the understanding of non-stoichiometric ratio, especially for Pu2O3-x, is not deep enough. Based on this, using the DFT + U theoretical scheme of density functional theory, we have systematically studied the structural stability, lattice parameters, electronic structure, mechanical and optical properties of six typical high temperature phases of ß-Pu2O3, α-Pu2O3,γ-Pu2O3, PuO, α-PuO2,γ-PuO2. Further, the mechanical properties and optical behavior of Pu2O3-x under different oxygen vacancy concentrations are analyzed and discussed in detail. The result shows that the elasticity modulus of single crystal in mechanical properties is directly related to the oxygen/plutonium ratio and crystal system. As the number of oxygen vacancies increases, the mechanical constants continue to increase. In terms of optical properties, PuO has the best optical properties, and the light absorption rate decreases with the increase of oxygen vacancy concentration.

Application and Development of Noncontact Detection Method of α-Particles Based on Radioluminescence.

The detection of α particles is of great significance in military and civil nuclear facility management. At present, the contact method is mainly used to detect α particles, but its shortcomings limit the broad application of this method. In recent years, preliminary research on noncontact α-particle detection methods has been carried out. In this paper, the theory of noncontact α-particles detection methods is introduced and studied. We also review the direct detection and imaging methods of α particles based on the different wavelengths of fluorescence photons, and analyze the application and development of this method, providing an important reference for researchers to carry out related work.

Insight into the influence of humic acid and sodium alginate fractions on membrane fouling in coagulation-ultrafiltration combined system.

Membrane fouling has become the one of main obstacles for the widespread application of membrane technology in water treatment processes. Coagulation as pretreatment is proven to be effective for the alleviation of membrane fouling. In this study, the influence of humic acid (HA)/sodium alginate (SA) fractions in the structure and resistance of cake layer on the membrane surface was investigated. The presence of SA at an appropriate fraction could facilitate the formation of large and loosely branched flocs and thereby form a more permeable cake layer on the membrane surface due to good bridging and charge neutralization abilities of SA molecules. The particle image velocimetry (PIV) technique was employed for monitoring the dynamic formation process of cake layer under different HA/SA fractions. The cake layer with a higher thickness was observed to be rapidly formed on the membrane surface at the presence of SA in water. According to the theoretical analysis, the membrane fouling in coagulation-ultrafiltration (UF) combined system demonstrated to be highly dependent on the size and intra-porosity of flocs. The fractal dimension of flocs might have an impact on the resistance of cake layer through affecting the porosity of aggregated flocs. The SA molecules could be used as the coagulant aid for effective alleviation of membrane fouling and the improvement of filtration performance in a coagulation-UF combined system.

[Variation of both DNA genetic structure and reproduction traits of plant autotetraploid].

Due to the effect of chromosome doubling, the DNA genetic structures of autotetraploid vary from its original diploid, and thus autotetraploid phenotype changes correspondingly. Compared with original diploid, the phenotype changes of autotetraploid were as follows. The part of its male and female gametes was of abortion. Its pollen (diplo-haplont) was significantly bigger. The number of egg cells or synergids or antipodal cells in its embryo sacs increases or reduces. While self-crossing procreation of it, pollen tubes and the fertilization processes of polar nucleus and the fertilized cells development were partly abnormal. Its reproductive capacity (or seed setting rate) dropped to some extents, which can be gradually improved with generations. For some plant species, it has a better cross-compatibility in distant hybridizations.