Studies on the Vitrified and Cryomilled Bosentan.

In this paper, several experimental techniques [X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetry, Fourier transform infrared spectroscopy, and broad-band dielectric spectroscopy] have been applied to characterize the structural and thermal properties, H-bonding pattern, and molecular dynamics of amorphous bosentan (BOS) obtained by vitrification and cryomilling of the monohydrate crystalline form of this drug. Samples prepared by these two methods were found to be similar with regard to their internal structure, H-bonding scheme, and structural (α) dynamics in the supercooled liquid state. However, based on the analysis of α-relaxation times (dielectric measurements) predicted for temperatures below the glass-transition temperature (Tg), as well as DSC thermograms, it was concluded that the cryoground sample is more aged (and probably more physically stable) compared to the vitrified one. Interestingly, such differences in physical properties turned out to be reflected in the lower intrinsic dissolution rate of BOS obtained by cryomilling (in the first 15 min of dissolution test) in comparison to the vitrified drug. Furthermore, we showed that cryogrinding of the crystalline BOS monohydrate leads to the formation of a nearly anhydrous amorphous sample. This finding, different from that reported by Megarry et al. [ Carbohydr. Res. 2011, 346, 1061-1064] for trehalose (TRE), was revealed on the basis of infrared and thermal measurements. Finally, two various hypotheses explaining water removal upon cryomilling have been discussed in the manuscript.

Ternary Eutectic Ezetimibe-Simvastatin-Fenofibrate System and the Physical Stability of Its Amorphous Form.

In this study, the phase diagram of the ternary system of ezetimibe-simvastatin-fenofibrate was established. It has been proven that the ternary composition recommended for the treatment of mixed hyperlipidemia forms a eutectic system. Since eutectic mixtures are characterized by greater solubility and dissolution rate, the obtained result can explain the marvelous medical effectiveness of combined therapy. Considering that another well-known method for improving the aqueous solubility is amorphization, the ternary system with eutectic concentration was converted into an amorphous form. Thermal properties, molecular dynamics, and physical stability of the obtained amorphous system were thoroughly investigated through various experimental techniques compared to both: neat amorphous active pharmaceutical ingredients (considered separately) and other representative concentrations of ternary mixture. The obtained results open up a new way of selecting the therapeutic concentrations for combined therapies, a path that considers one additional variable: eutecticity.

High-Pressure Dielectric Studies-a Way to Experimentally Determine the Solubility of a Drug in the Polymer Matrix at Low Temperatures.

In this work, we employed broad-band dielectric spectroscopy to determine the solubility limits of nimesulide in the Kollidon VA64 matrix at ambient and elevated pressure conditions. Our studies confirmed that the solubility of the drug in the polymer matrix decreases with increasing pressure, and molecular dynamics controls the process of recrystallization of the excess of amorphous nimesulide from the supersaturated drug-polymer solution. More precisely, recrystallization initiated at a certain structural relaxation time of the sample stops when a molecular mobility different from the initial one is reached, regardless of the temperature and pressure conditions. Finally, based on the presented results, one can conclude that by transposing vertically the results obtained at elevated pressures, one can obtain the solubility limit values corresponding to low temperatures. This approach was validated by the comparison of the experimentally determined points with the theoretically obtained values based on the Flory-Huggins theory.

How can we improve the physical stability of co-amorphous system containing flutamide and bicalutamide? The case of ternary amorphous solid dispersions.

The article describes the preparation and characterization of binary mixtures of two antiandrogens used in prostate cancer treatment, i.e. flutamide (FL) and bicalutamide (BIC), as well as their ternary mixtures with either poly(methyl methacrylate-co-ethyl acrylate) (MMA/EA) or polyvinylpyrrolidone (PVP). The samples were converted into amorphous form to improve their water solubility and dissolution rate. Broadband dielectric spectroscopy and differential scanning calorimetry revealed that FL-BIC (65%) (w/w) does not tend to crystallize from the supercooled liquid state. We made the assumption that the drug-to-drug weight ratio should be maintained as in the case of monotherapy so we decided to investigate the system containing FL and BIC in 15:1 (w/w) ratio with 30% additive of polymers as stabilizers. Our research has shown that only in the case of the FL-BIC-PVP mixture the crystallization has been completely inhibited, both in glassy and supercooled liquid state, which was confirmed by X-ray diffraction studies. In addition, we performed solubility and dissolution rate tests, which showed a significant improvement in solubility of ternary system as compared to its crystalline counterpart. Enhanced physical stability and water solubility of the amorphous ternary system makes it promising for further studies.

Isochronal Conditions-The Key To Maintain the Given Solubility Limit, of a Small Molecule within the Polymer Matrix, at Elevated Pressure.

In this work, we proposed the method to maintain the desired level of drug's solubility within the polymer matrix by adjusting conditions to uphold the same molecular dynamics of the system (e.g., temperature for set elevated pressure or vice versa). Namely, we observed, that recrystallization of the drug from the supersaturated drug-polymer system, initiated for the same structural relaxation time of the sample (τα-1) ceases when certain, different than the initial, molecular mobility of the systems is reached (τα-2)-regardless of a given combination of temperature and pressure conditions. Based on the presented results, one can conclude that the molecular dynamics seem to control the process of recrystallization of the excess amount of solute from the supersaturated solution (e.g., small molecules dissolved within the polymer). Therefore, it appears that the elevated pressure compensates the effect of solubility enhancement caused by the elevated temperature. Such information not only is of fundamental relevance in science but also, from a much broader perspective, could be potentially very useful considering extrusion-based manufacturing methods.

How Does the CO2 in Supercritical State Affect the Properties of Drug-Polymer Systems, Dissolution Performance and Characteristics of Tablets Containing Bicalutamide?

The increasing demand for novel drug formulations has caused the introduction of the supercritical fluid technology, CO2 in particular, into pharmaceutical technology as a method enabling the reduction of particle size and the formation of inclusion complexes and solid dispersions. In this paper, we describe the application of scCO2 in the preparation of binary systems containing poorly soluble antiandrogenic drug bicalutamide and polymeric excipients, either Macrogol 6000 or Poloxamer®407. The changes in the particle size and morphology were followed using scanning electron microscopy and laser diffraction measurements. Differential scanning calorimetry was applied to assess thermal properties, while X-ray powder diffractometry was used to determine the changes in the crystal structure of the systems. The dissolution of bicalutamide was also considered. Binary solid dispersions were further compressed, and the attributes of tablets were assessed. Tablets were analyzed directly after manufacturing and storage in climate chambers. The obtained results indicate that the use of supercritical CO2 led to the morphological changes of particles and the improvement of drug dissolution. The flowability of blends containing processed binary systems was poor; however, they were successfully compressed into tablets exhibiting enhanced drug release.

Molecular Dynamics and Physical Stability of Ibuprofen in Binary Mixtures with an Acetylated Derivative of Maltose.

In this paper, we explore the strategy increasingly used to improve the bioavailability of poorly water-soluble crystalline drugs by formulating their amorphous solid dispersions. We focus on the potential application of a low molecular weight excipient octaacetyl-maltose (acMAL) to prepare physically stable amorphous solid dispersions with ibuprofen (IBU) aimed at enhancing water solubility of the drug compared to that of its crystalline counterpart. We thoroughly investigate global and local molecular dynamics, thermal properties, and physical stability of the IBU+acMAL binary systems by using broadband dielectric spectroscopy and differential scanning calorimetry as well as test their water solubility and dissolution rate. The obtained results are extensively discussed by analyzing several factors considered to affect the physical stability of amorphous systems, including those related to the global mobility, such as plasticization/antiplasticization effects, the activation energy, fragility parameter, and the number of dynamically correlated molecules as well as specific intermolecular interactions like hydrogen bonds, supporting the latter by density functional theory calculations. The observations made for the IBU+acMAL binary systems and drawn recommendations give a better insight into our understanding of molecular mechanisms governing the physical stability of amorphous solid dispersions.

Compression-Induced Phase Transitions of Bicalutamide.

The formation of solid dispersions with the amorphous drug dispersed in the polymeric matrix improves the dissolution characteristics of poorly soluble drugs. Although they provide an improved absorption after oral administration, the recrystallization, which can occur upon absorption of moisture or during solidification and other formulation stages, serves as a major challenge. This work aims at understanding the amorphization-recrystallization changes of bicalutamide. Amorphous solid dispersions with poly(vinylpyrrolidone-co-vinyl acetate) (PVP/VA) were obtained by either ball milling or spray drying. The applied processes led to drug amorphization as confirmed using X-ray diffraction and differential scanning calorimetry. Due to a high propensity towards mechanical activation, the changes of the crystal structure of physical blends of active pharmaceutical ingredient (API) and polymer upon pressure were also examined. The compression led to drug amorphization or transition from form I to form II polymorph, depending on the composition and applied force. The formation of hydrogen bonds confirmed using infrared spectroscopy and high miscibility of drug and polymer determined using non-isothermal dielectric measurements contributed to the high stability of amorphous solid dispersions. They exhibited improved wettability and dissolution enhanced by 2.5- to 11-fold in comparison with the crystalline drug. The drug remained amorphous upon compression when the content of PVP/VA in solid dispersions exceeded 20% or 33%, in the case of spray-dried and milled systems, respectively.

Enhancement of the Physical Stability of Amorphous Sildenafil in a Binary Mixture, with either a Plasticizing or Antiplasticizing Compound.

The main purpose of this paper was to evaluate the impact of both high- and low-Tg polymer additives on the physical stability of an amorphous drug, sildenafil (SIL). The molecular mobility of neat amorphous SIL was strongly affected by the polymeric excipients used (Kollidon VA64 (KVA) and poly(vinylacetate) (PVAc)). The addition of KVA slowed down the molecular dynamics of amorphous SIL (antiplasticizing effect), however, the addition of PVAc accelerated the molecular motions of the neat drug (plasticizing effect). Therefore, in order to properly assess the effect of the polymer on the physical stability of SIL, the amorphous samples at both: isothermal (at constant temperature-353 K) and isochronal (at constant relaxation time-τα = 1.5 ms) conditions were compared. Our studies showed that KVA suppressed the recrystallization of amorphous SIL more efficiently than PVAc. KVA improved the physical stability of the amorphous drug, regardless of the chosen concentration. On the other hand, in the case of PVAc, a low polymer content (i.e., 25 wt.%) destabilized amorphous SIL, when stored at 353 K. Nevertheless, at high concentrations of this excipient (i.e., 75 wt.%), its effect on the amorphous pharmaceutical seemed to be the opposite. Therefore, above a certain concentration, the PVAc presence no longer accelerates the SIL recrystallization process, but inhibits it.

Importance of Mesoporous Silica Particle Size in the Stabilization of Amorphous Pharmaceuticals-The Case of Simvastatin.

In this paper, the role of mesoporous silica (MS) particle size in the stabilization of amorphous simvastatin (SVT) is revealed. For inhibiting recrystallization of the supercooled drug, the two MS materials (Syloid® XDP 3050 and Syloid® 244 FP) were employed. The crystallization tendency of SVT alone and in mixture with the MS materials was investigated by Differential Scanning Calorimetry (DSC) and Broadband Dielectric Spectroscopy (BDS). Neither confinement of the SVT molecules inside the MS pores nor molecular interactions between functional groups of the SVT molecules and the surface of the stabilizing excipient could explain the observed stabilization effect. The stabilization effect might be correlated with diffusion length of the SVT molecules in the MS materials that depended on the particle size. Moreover, MS materials possessing different particle sizes could offer free spaces with different sizes, which might influence crystal growth of SVT. All of these factors must be considered when mesoporous materials are used for stabilizing pharmaceutical glasses.

Molecular dynamics, viscoelastic properties and physical stability studies of a new amorphous dihydropyridine derivative with T-type calcium channel blocking activity.

One of the greatest problems of pre-clinical development of new chemical entities is their poor aqueous solubility. Herein, we focus our attention on MD20 - a novel calcium channel blocker that selectively blocks T-type calcium channel (Cav3.2) over L-type calcium channel (Cav1.2). To avoid future problems with limited solubility of this compound, an amorphous form of MD20 was obtained and thoroughly investigated by various experimental techniques. The thermal properties of both crystalline and amorphous MD20 were examined by differential scanning calorimetry and thermogravimetry. Dielectric spectroscopy studies of MD20 at T < Tg revealed that this compound possesses as many as four secondary relaxation processes. The molecular dynamics of the supercooled sample was investigated by dielectric and mechanical spectroscopies. In this paper, a comparison of the relaxation dynamics of supercooled MD20 obtained from both of these experimental techniques is presented. On the basis of the dielectric studies, the time of physical stability of the investigated material (at T = 298 K) was predicted as 150 years. Finally, we have performed experimental long-term stability tests, which showed that amorphous MD20 did not reveal any signs of re-crystallization for at least 260 days.

Glass Transition Dynamics and Physical Stability of Amorphous Griseofulvin in Binary Mixtures with Low-Tg Excipients.

Amorphization of drug formulations containing active pharmaceutical ingredients (APIs) and excipients has been proven to be an effective strategy to improve their poor aqueous solubility. The excipients can also impact the physical stability of the prepared amorphous forms. Generally, researchers are more apt to select excipients that have high values of glass transition temperature (Tg) because of the antiplasticization effect of the additives on APIs. In this article, we studied the glass transition dynamics as well as crystallization behavior in binary blends composed of griseofulvin (GSF) and two low-Tg additives, octaacetylmaltose (acMAL) and polyvinyl acetate (PVAc), with a particular focus on the plasticization effect. Effectively suppressed crystallization of GSF is observed in both systems when higher excipient contents are used. Our finding aims to encourage the use of specifically developed protocols in which suitable plasticizers are used as excipients for stabilizing the amorphous state of a drug.

How can we improve the physical stability of co-amorphous system containing flutamide and bicalutamide? The case of ternary amorphous solid dispersions.

The article describes the preparation and characterization of binary mixtures of two antiandrogens used in prostate cancer treatment, i.e. flutamide (FL) and bicalutamide (BIC), as well as their ternary mixtures with either poly(methyl methacrylate-co-ethyl acrylate) (MMA/EA) or polyvinylpyrrolidone (PVP). The samples were converted into amorphous form to improve their water solubility and dissolution rate. Broadband dielectric spectroscopy and differential scanning calorimetry revealed that FL-BIC (65%) (w/w) does not tend to crystallize from the supercooled liquid state. We made the assumption that the drug-to-drug weight ratio should be maintained as in the case of monotherapy so we decided to investigate the system containing FL and BIC in 15:1 (w/w) ratio with 30% additive of polymers as stabilizers. Our research has shown that only in the case of the FL-BIC-PVP mixture the crystallization has been completely inhibited, both in glassy and supercooled liquid state, which was confirmed by X-ray diffraction studies. In addition, we performed solubility and dissolution rate tests, which showed a significant improvement in solubility of ternary system as compared to its crystalline counterpart. Enhanced physical stability and water solubility of the amorphous ternary system makes it promising for further studies.

The Self-Assembly Phenomenon of Poloxamers and Its Effect on the Dissolution of a Poorly Soluble Drug from Solid Dispersions Obtained by Solvent Methods.

The self-assembly phenomenon of amphiphiles has attracted particular attention in recent years due to its wide range of applications. The formation of nanoassemblies able to solubilize sparingly water-soluble drugs was found to be a strategy to solve the problem of poor solubility of active pharmaceutical ingredients. Binary and ternary solid dispersions containing Biopharmaceutics Classification System (BCS) class II drug bicalutamide and either Poloxamer®188 or Poloxamer®407 as the surface active agents were obtained by either spray drying or solvent evaporation under reduced pressure. Both processes led to morphological changes and a reduction of particle size, as confirmed by scanning electron microscopy and laser diffraction measurements. The increase in powder wettability was confirmed by means of contact angle measurements. The effect of an alteration of the crystal structure was followed by powder X-ray diffractometry while thermal properties were determined using differential scanning calorimetry. Interestingly, bicalutamide exhibited a polymorph transition after spray drying with the poloxamer and polyvinylpyrrolidone (PVP), while the poloxamer underwent partial amorphization. Moreover, due to the surface activity of the carrier, the solid dispersions formed nanoaggregates in water, as confirmed using dynamic light scattering measurements. The aggregates measuring 200⁻300 nm in diameter were able to solubilize bicalutamide inside the hydrophobic inner parts. The self-assembly of binary systems was found to improve the amount of dissolved bicalutamide by 4- to 8-fold in comparison to untreated drug. The improvement in drug dissolution was correlated with the solubilization of poorly soluble molecules by macromolecules, as assessed using emission spectroscopy.

Physical Stability and Viscoelastic Properties of Co-Amorphous Ezetimibe/Simvastatin System.

The purpose of this paper is to examine the physical stability as well as viscoelastic properties of the binary amorphous ezetimibe⁻simvastatin system. According to our knowledge, this is the first time that such an amorphous composition is prepared and investigated. The tendency toward re-crystallization of the amorphous ezetimibe⁻simvastatin system, at both standard storage and elevated temperature conditions, have been studied by means of X-ray diffraction (XRD). Our investigations have revealed that simvastatin remarkably improves the physical stability of ezetimibe, despite the fact that it works as a plasticizer. Pure amorphous ezetimibe, when stored at room temperature, begins to re-crystallize after 14 days after amorphization. On the other hand, the ezetimibe-simvastatin binary mixture (at the same storage conditions) is physically stable for at least 1 year. However, the devitrification of the binary amorphous composition was observed at elevated temperature conditions (T = 373 K). Therefore, we used a third compound to hinder the re-crystallization. Finally, both the physical stability as well as viscoelastic properties of the ternary systems containing different concentrations of the latter component have been thoroughly investigated.

Influence of Polymeric Additive on the Physical Stability and Viscoelastic Properties of Aripiprazole.

In this article, we investigated aripiprazole + Kollidon VA64 (ARP/KVA) and aripiprazole + Soluplus (ARP/SOP) amorphous solid dispersions. Thermal properties of all prepared systems have been examined by means of differential scanning calorimetry (DSC). Compositions revealing the recrystallization tendency were subsequently investigated by means of broadband dielectric spectroscopy (BDS). On the basis of dielectric data, the physically stable drug-polymer concentrations have been found. Finally, these systems have been investigated by rheology, which enables us to determine the minimal temperature required for dissolving the drug in the polymeric matrix, as well as the temperature dependence of the sample viscosity. Our investigations have shown that the amorphous form of the investigated antipsychotic drug might be effectively stabilized by both employed polymers. However, due to the better stabilization effect and the more favorable rheological properties, KVA proved to be a better polymeric excipient for extrusion of amorphous aripiprazole.

Peculiar relaxation dynamics of propylene carbonate derivatives.

The aim of this work is to analyze in detail the effect of the alkyl chain length on the dynamics of glass-forming propylene carbonate (PC) derivatives. Examined samples are low-molecular weight derivatives of the PC structure, i.e., the 4-alkyl-1,3-dioxolan-2-one series, modified by changing the alkyl substituent from methyl to hexyl. The molecular dynamics (MD) has been analyzed based on experimental data collected from differential scanning calorimetry, broadband dielectric spectroscopy (BDS), X-ray diffraction (XRD), and nuclear magnetic resonance relaxometry measurements as well as MD simulations. The dielectric results show in samples with the propyl- or longer carbon chain the presence of slow Debye-like relaxation with features similar to those found in associative materials. Both XRD and MD reveal differences in the intermolecular structure between PC and 4-butyl-1,3-dioxolan-2-one liquids. Moreover, MD shows that the probability of finding one terminal carbon atom of the side chain of BPC in the vicinity of another carbon atom of the same type is much higher than in the case of PC. It suggests that there is a preference for longer hydrocarbon chains to set themselves close to each other. Consequently, the observed slow-mode peak may be caused by movement of aggregates maintained by van der Waals interactions. Reported herein, findings provide a new insight into the molecular origin of Debye-like relaxation.

Co-Stabilization of Amorphous Pharmaceuticals-The Case of Nifedipine and Nimodipine.

Currently, a research hotspot in amorphous active pharmaceutical ingredients (APIs) is to understand the key factors that dominate recrystallization and to develop effective methods for stabilizing amorphous forms. Consequently, we investigated the influence of the global molecular mobility and structural properties on the crystallization tendency of three 1,4-dihydropyridine derivatives (nifedipine, nisoldipine, and nimodipine) in their supercooled states using differential scanning calorimetry (DSC) and broadband dielectric spectroscopy (BDS) techniques. The BDS is also employed to monitor the isothermal crystallization kinetics of supercooled nifedipine and nimodipine at T = 333 K under ambient pressure. As a result, we found that nimodipine exhibits much slower crystallization in comparison to nifedipine. However, nimodipine crystallizes much faster when as little as 10 MPa of pressure is exerted on sample. Such compression-induced crystallization of nimodipine as well as the inherent instability of nifedipine can be solved effectively by preparing coamorphous nifedipine/nimodipine combinations. Interestingly, the high physical stability of nifedipine/nimodipine mixtures is achieved despite the fact that the nimodipine acts as a plasticizer.

Can Storage Time Improve the Physical Stability of Amorphous Pharmaceuticals with Tautomerization Ability Exposed to Compression? The Case of a Chloramphenicol Drug.

In this article we thoroughly investigated the physical stability of the amorphous form of a chloramphenicol drug. The tendency toward recrystallization of this drug has been examined (i) at nonisothermal conditions by means of a DSC technique; (ii) at isothermal conditions and temperature close to Troom by means of dielectric spectroscopy; (iii) at isothermal conditions and elevated temperatures of T = 323 K and 338 K by dielectric spectroscopy; and (iv) at conditions imitating the manufacturing procedure (i.e., elevated temperature and compression procedure). Our investigations have shown that amorphous chloramphenicol, stored at both standard storage and elevated temperature conditions, does not reveal a tendency toward recrystallization. However, compression significantly changes this behavior and destabilizes the examined compound. We found that due to chemical equilibration of the sample, the elongation of the storage time before compression might improve the physical stability of the examined pharmaceutical exposed to compression 34-times.

Enhanced dissolution of solid dispersions containing bicalutamide subjected to mechanical stress.

The anticancer drug bicalutamide was co-milled with either Macrogol 6000 or Poloxamer 407, and the physicochemical parameters that drive the phase transition of binary systems and influence the dissolution modification of bicalutamide were studied. Milled binary systems with reduced particle size were assessed by scanning electron microscopy and laser diffraction measurements. The results of thermal analysis supported by X-ray diffractometry confirmed the reduction of the crystallinity of bicalutamide co-milled with Macrogol 6000. Infrared spectroscopy was used to determine the molecular structure of the samples and indicated weak interactions between drug and polymer molecules. Two mechanisms were identified and were involved in up to 11-fold enhanced dissolution. The first one was based on improved wettability due to a decreased contact angle in samples containing Macrogol 6000. The second one relied on the solubilization of bicalutamide within nanoaggregates formed by Poloxamer 407 that resulted from its surface activity. This finding was confirmed with fluorescence spectroscopy, dynamic light scattering and cryogenic transmission electron microscopy assays. Given the dissolution rate-limited absorption combined with the reduced bioavailability of bicalutamide as a BCS class II drug, the assessment of the mechanisms driving the increase in drug dissolution is of particular importance in drug development.