Toxico-pathological effects of ochratoxin A and its diastereoisomer under in ovo conditions and in vitro evaluation of the toxicity of these toxins against the embryo Gallus gallus fibroblast cell line.

Herein, we conducted a comparative study on the embryotoxicity of ochratoxin A (OTA) and its diastereomer 2'R-ochratoxin A (2'R-OTA) under in ovo conditions, as well as assess the in vitro embryotoxicity of these substances together with ochratoxin B and α-ochratoxin, using chicken (Gallus gallus domesticus) embryo cell lines. In ovo tests involved egg incubation of 8 different groups (i.e., control "0"-no puncture or injection (standard incubation); "00"-punctured eggs without injection; "OTA 0.25," "OTA 0.50," "OTA 0.75," "2'R-OTA 0.25," "2'R-OTA 0.50," "2'R-OTA 0.75"-eggs containing OTA or 2'R-OTA at 0.25, 0.50, and 0.75 µg/egg concentration, respectively). The results confirmed OTA's impact on early and late embryo mortality, where chick hatchability decreased with increasing toxin dosage. Both OTA and 2'R-OTA demonstrated embryotoxicity, however, in the case of the highest OTA diastereomer dose, nearly 11% higher chick hatchability was observed compared with the group that received OTA. 2'R-OTA dosage did not reduce parameters chick quality compared to chicks hatched from control group eggs. OTA concentrations were higher than 2'R-OTA detected in chicken organs such as liver and kidney, whereas 2'R-OTA concentrations were higher in blood serum and heart. The presented studies highlighted the differences in the ability to accumulate toxins in certain organs, which, to a certain extent, may affect the potential toxicity on individual organs. Additionally, during in vitro tests, when assessing the cytotoxic effects of OTA and its analogues toward the chicken embryonic cell line in an MTT assay, the cell metabolic activity was inhibited to a comparable extent at 27-times higher concentration of 2'R-OTA than OTA (0.24 µM). Also, comparably lower toxicity was attributed to the remaining OTA derivatives.

Quality Aspects of Designing Prohealth Liver Sausages Enriched with Walnut Paste.

The aim of the study was to determine the influence of enriching liver sausages with different levels of walnut paste on the quality properties of this product. Sausages were produced with 5, 10, 15, 20, and 25% amount additions of walnut paste and without the addition of nuts (control product). It was found that walnut paste, especially when introduced at an amount >15%, was a component that limited thermal losses and significantly modified the characteristics of liver sausages. The addition of walnut paste also increased the fat content of liver sausages by two−three times, which was one of the factors that weakened their structure, including lowering their compression, shear, and penetration force but increasing their spreadability. Moreover, the addition of walnut paste at an amount of ≥20% resulted in the products having a slightly different color, with lower values for the a* color parameter. Such changes were assessed as a favorable modification to the product, increasing its overall desirability, especially with the addition of walnut paste at the level of 20%. Walnut paste can therefore be a valuable ingredient that allows for the development of a health-promoting product with improved quality features. However, with the addition of a walnut paste at an amount of 25%, it is necessary to take into account the more rapid and unfavorable fat changes that occur during the storage of the liver sausages, as indicated by about 50% higher TBARS values (compared to the control product).

Effect of Differentiated Relative Humidity of Air on the Quality of Traditional Speciality Guaranteed "Krakowska Sucha Staropolska" Sausage.

The aim of the study was to determine the effects of air relative humidity (RH: 60 and 80%) during the drying process of "krakowska sucha staropolska" (KSS) sausages on selected quality characteristics. The composition and production process of KSS sausages complied the requirements of traditional specialities guaranteed. It was found that the use of lower RH of drying air allowed a time reduction of 20%. Lowering the RH of air during the drying process did not affect the cross-sectional colour and odour of the sausages, colour components, TBARS values, protein, fat and salt content. However, the acceleration of the drying process resulted in very dried outer layers and less dry interior of KSS sausages. As a result, the sausages had lower scores in the sensory evaluation of hardness and overall acceptability. For this reason, shortening the drying process of sausages by using air with lower relative humidity is not recommended.

Changes in the microbiological quality and content of biogenic amines in chicken fillets packed using various techniques and stored under different conditions.

The aim of this study was to determine the biogenic amines (BAs) formed in chicken breast meat packaged using different techniques (AP, Hi-O2-MAP or VP) during the storage under different conditions (cold room or display case), to correlate the microbiological quality (TPC, LAB, Pseudomonas spp. and Enterobacteriaceae) of chicken meat with BAs formation and to assess the suitability of selected biogenic amines as indicators of chicken meat spoilage. The initial TPC of chicken fillets was 2.57-3.04 log cfu/g. Over time a systematic significant (p ≤ 0.05) increase in TPC was observed to >7.5 log cfu/g (AP and VP; display case) determined on day 9. It was found that cadaverine and tyramine dominated in quantitative terms in chicken fillets, regardless of packaging technique and storage conditions (166.00 mg/kg in AP meat in cold room on day 9 and 175.03 mg/kg on day 9 in MAP meat in display case, respectively). Taking into account the BAI, high and significant (p ≤ 0.05) correlation coefficients (from 0.51 to 0.95) were obtained with all analyzed indicators of microbiological quality. The concentration of cadaverine, putrescine contents or BAI can potentially serve as chemical quality indicator for freshness of chicken meat.

The Effect of the Addition of Fiber Preparations on the Color of Medium-Grounded Pasteurized and Sterilized Model Canned Meat Products.

A beneficial aspect of the use of fiber preparations in the meat industry is the improvement of some quality characteristics of meat products. However, the preparation added in the amount of 3 or 6% may affect their color. The effect of the addition of barley, wheat and oat fiber preparations with different fiber lengths, in quantities allowing the product to be indicated as "high in fiber" or "source of fiber", to pasteurized or sterilized medium-grounded canned meat products on their color, was determined. In the obtained canned meat products, the basic chemical composition and the L*, a* and b*, C* (Chroma) and h* (hue angle) color components were determined. The addition of the barley fiber preparation BG 300 to the model canned meat products caused a significant (p ≤ 0.05) darkening and an increase in the proportion of yellow color. In an industrial practice, this may result in poorer consumer acceptance of the meat product. Fiber length of wheat and barley fiber had no effect on the color components of products. The 6% addition of the wheat fiber preparations WF 200R and WF 600R or the oat fiber preparations HF 200 and HF 600 caused an apparent lightening of their color (ΔE > 2) compared to the control products.

Influence of the Dose and Length of Wheat Fiber on the Quality of Model Sterilized Canned Meat Products.

The aim of this study was to evaluate the quality of model homogenized sterilized canned meat products produced with wheat fiber preparations (WF 200 R or WF 600 R) with different fiber lengths used in the amount of 3% or 6% by weight of the batter. Basic chemical composition (water, protein, fat, collagen and salt content), pH level, water activity, thermal drip, CIEL*a*b* color components, texture parameters (TPA, shear force) and sensory quality were determined. The addition of 3% or 6% of wheat fiber preparations did not affect the basic chemical composition, water activity and pH of products. The 6% addition of both fiber preparations caused lightening of the color of the meat blocks. Products with the addition of both wheat fiber preparations were characterized by significantly (p ≤ 0.05) higher hardness than the control product. Sensory quality of products, except tastiness, with the addition of wheat fiber preparations did not differ from the control product. There was no significant effect of wheat fiber length on the quality of meat blocks. Both lightening the color of canned meat blocks produced with the addition of wheat fiber preparation, as well as increasing their hardness, is desirable and contributes to increasing the quality of products.

Estimation of Chemical Composition of Pork Trimmings by Use of Density Measurement-Hydrostatic Method.

This study aims to determine the possibility of using density measurements by using the hydrostatic method for the estimation of the chemical composition of pork. The research material included 75 pork samples obtained during industrial butchering and cutting. The density measurements were performed using the hydrostatic method based on Archimedes' principle. The meat samples were minced, and the content of the basic chemical components in them was determined. The usefulness of density measurement using the hydrostatic method in chemical composition estimation was determined by analyzing the correlation for the entire population, and after grouping the samples with a low (<15%), medium (15-25%), and high (>25%) fat content. High (in absolute value) coefficients of correlation between the meat density and the content of water (0.96), protein (0.94), and fat (-0.96) were found based on the results obtained. In order to achieve higher accuracy of the estimation, the applied regression equations should be adjusted to the presumed fat content in the meat. The standard error of prediction (SEP) values ranged from 0.67% to 2.82%, which indicates that the calculated estimation accuracy may be sufficient for proper planning of the production. Higher SEP values were found in fat content estimation and the lowest ones were found in protein content estimation.

Chemical Composition of Edible Ostrich Offal.

The offal (hearts, stomachs, and livers) of 24 African ostriches (Strutio camelus var. domesticus) from Polish farms were used in this study. Offal were taken directly from the production line; they were weighed and their water, fat, protein, ash and total collagen contents were determined. Ostrich hearts and stomachs were found to have high protein (18.1% and 19.0%, respectively) and low fat content (2.0% and 0.9%, respectively), typical of lean meat. Thus, the offal could be used in processed offal products or in pet food. Ostrich livers had slightly lower protein content (16.6%) and significantly higher and diverse fat content (4.4-28.4%). Heavier livers had significantly (P<0.05) higher fat and lower protein, water, and ash content. The utilization of ostrich liver should be preceded by classification of its fat content.

The effect of pale, soft and exudative meat on the quality of canned pork in gravy.

The objective of the study was to evaluate the use of PSE meat in the production of sterilized pork type canned meat in its own gravy. Canned meat products were produced with 50% of PSE meat as well as with 100% PSE meat, and compared with canned meat products of good quality (RFN). It was found that decreased quality of PSE meat had a small impact on the quality of canned meat products. Substitution of both 50% as well as the total quantity of RFN meat with PSE meat did not affect the course of the sterilization process, neither increase the quantity of excreted fat and jelly in canned meat. It also had no effect on the instrumentally-measured parameters of texture and neither did it affect different sensory quality features, including the overall desirability of the product. The PSE canned meat product were characterized by higher values of L* and b* color parameters.

A Potential Use of 3-D Scanning to Evaluate the Chemical Composition of Pork Meat.

UNLABELLED: The aim of this study was to determine the possibility of 3-D scanning method in chemical composition evaluation of pork meat. The sampling material comprised neck muscles (1000 g each) obtained from 20 pork carcasses. The volumetric estimation process of the elements was conducted on the basis of point cloud collected using 3-D scanner. Knowing the weight of neck muscles, their density was calculated which was subsequently correlated with the content of basic chemical components of the pork meat (water, protein and fat content, determined by standard methods). The significant correlations (P ≤ 0.05) between meat density and water (r = 0.5213), protein (r = 0.5887), and fat (r = -0.6601) content were obtained. Based on the obtained results it seems likely to employ the 3-D scanning method to compute the meat chemical composition. PRACTICAL APPLICATION: The use of the 3-D scanning method in industrial practice will allow to evaluate the chemical composition of meat in online mode on a dressing and fabrication line and in a rapid, noninvasive manner. The control of the raw material using the 3-D scanning will allow to make visual assessment more objective and will enable optimal standardization of meat batches prior to processing stage. It will ensure not only the repeatability of product quality characteristics, but also optimal use of raw material-lean and fat meat. The knowledge of chemical composition of meat is essential due to legal requirements associated with mandatory nutrition facts labels on food products.

Lightness of the color measured by computer image analysis as a factor for assessing the quality of pork meat.

The aim of this study was an attempt to use computer image analysis (CIA) to detect PSE (pale, soft, exudative) defect in pork meat. Material for the study was 50 slices obtained from pork longissimus muscles (m. longissimus) from 50 different animals. Based on measurements of pH, electrical conductivity, color lightness (L*), sixteen of the slices were classified as PSE meat. Another sixteen slices showed features of a normal meat. Photos of tested meat slices were taken and analyzed with computer image analysis. The article presents the data in three color models: RGB, HSV/HSB and HSL. Obtained results demonstrate the possibility of using V/B values (HSV/HSB model), L (HSL model) and the R, G, B values with the RGB model to detect PSE defect in pork meat.