Efficient and stable blue quantum dot light-emitting diode.

The visualization of accurate colour information using quantum dots has been explored for decades, and commercial products employing environmentally friendly materials are currently available as backlights1. However, next-generation electroluminescent displays based on quantum dots require the development of an efficient and stable cadmium-free blue-light-emitting device, which has remained a challenge because of the inferior photophysical properties of blue-light-emitting materials2,3. Here we present the synthesis of ZnSe-based blue-light-emitting quantum dots with a quantum yield of unity. We found that hydrofluoric acid and zinc chloride additives are effective at enhancing luminescence efficiency by eliminating stacking faults in the ZnSe crystalline structure. In addition, chloride passivation through liquid or solid ligand exchange leads to slow radiative recombination, high thermal stability and efficient charge-transport properties. We constructed double quantum dot emitting layers with gradient chloride content in a light-emitting diode to facilitate hole transport, and the resulting device showed an efficiency at the theoretical limit, high brightness and long operational lifetime. We anticipate that our efficient and stable blue quantum dot light-emitting devices can facilitate the development of electroluminescent full-colour displays using quantum dots.

Highly efficient and stable InP/ZnSe/ZnS quantum dot light-emitting diodes.

Quantum dot (QD) light-emitting diodes (LEDs) are ideal for large-panel displays because of their excellent efficiency, colour purity, reliability and cost-effective fabrication1-4. Intensive efforts have produced red-, green- and blue-emitting QD-LEDs with efficiencies of 20.5 per cent4, 21.0 per cent5 and 19.8 per cent6, respectively, but it is still desirable to improve the operating stability of the devices and to replace their toxic cadmium composition with a more environmentally benign alternative. The performance of indium phosphide (InP)-based materials and devices has remained far behind those of their Cd-containing counterparts. Here we present a synthetic method of preparing a uniform InP core and a highly symmetrical core/shell QD with a quantum yield of approximately 100 per cent. In particular, we add hydrofluoric acid to etch out the oxidative InP core surface during the growth of the initial ZnSe shell and then we enable high-temperature ZnSe growth at 340 degrees Celsius. The engineered shell thickness suppresses energy transfer and Auger recombination in order to maintain high luminescence efficiency, and the initial surface ligand is replaced with a shorter one for better charge injection. The optimized InP/ZnSe/ZnS QD-LEDs showed a theoretical maximum external quantum efficiency of 21.4 per cent, a maximum brightness of 100,000 candelas per square metre and an extremely long lifetime of a million hours at 100 candelas per square metre, representing a performance comparable to that of state-of-the-art Cd-containing QD-LEDs. These as-prepared InP-based QD-LEDs could soon be usable in commercial displays.

Modulation of the Dirac point voltage of graphene by ion-gel dielectrics and its application to soft electronic devices.

We investigated systematic modulation of the Dirac point voltage of graphene transistors by changing the type of ionic liquid used as a main gate dielectric component. Ion gels were formed from ionic liquids and a non-triblock-copolymer-based binder involving UV irradiation. With a fixed cation (anion), the Dirac point voltage shifted to a higher voltage as the size of anion (cation) increased. Mechanisms for modulation of the Dirac point voltage of graphene transistors by designing ionic liquids were fully understood using molecular dynamics simulations, which excellently matched our experimental results. It was found that the ion sizes and molecular structures play an essential role in the modulation of the Dirac point voltage of the graphene. Through control of the position of their Dirac point voltages on the basis of our findings, complementary metal-oxide-semiconductor (CMOS)-like graphene-based inverters using two different ionic liquids worked perfectly even at a very low source voltage (V(DD) = 1 mV), which was not possible for previous works. These results can be broadly applied in the development of low-power-consumption, flexible/stretchable, CMOS-like graphene-based electronic devices in the future.

Polypyrrole/Agarose-based electronically conductive and reversibly restorable hydrogel.

Conductive hydrogels are a class of composite materials that consist of hydrated and conducting polymers. Due to the mechanical similarity to biointerfaces such as human skin, conductive hydrogels have been primarily utilized as bioelectrodes, specifically neuroprosthetic electrodes, in an attempt to replace metallic electrodes by enhancing the mechanical properties and long-term stability of the electrodes within living organisms. Here, we report a conductive, smart hydrogel, which is thermoplastic and self-healing owing to its unique properties of reversible liquefaction and gelation in response to thermal stimuli. In addition, we demonstrated that our conductive hydrogel could be utilized to fabricate bendable, stretchable, and patternable electrodes directly on human skin. The excellent mechanical and thermal properties of our hydrogel make it potentially useful in a variety of biomedical applications such as electronic skin.

Diagnostic value and clinical significance of stress hormones in patients with tinnitus.

Tinnitus has been found to be modulated by stress and is also closely related to the emotional state and the limbic system. In the present study, we evaluated the diagnostic and clinical values of several stress hormones in a large number of tinnitus patients. This study included 344 patients with sensorineural tinnitus and 87 normal controls. A questionnaire about tinnitus was administered to the participants, and blood levels of norepinephrine (NE), epinephrine (Epi), a metabolite of serotonin (5-hydroxyindoleacetic acid, 5-HIAA) and cortisol were compared between groups. In results, the mean values of Beck's depression inventory (BDI), Brief Encounter Psychosocial Instrument (BEPSI), NE, and 5-HIAA levels were higher in the tinnitus group, although there was no statistical significance. But, the proportion of participants with elevated 5-HIAA was significantly higher in the tinnitus group (21.8 vs. 8.0 %, P < 0.05), and the 5-HIAA level significantly correlated with the duration of tinnitus, NE and cortisol. Elevated stress-related hormones, as well as hearing loss, BDI, and BEPSI were the most related factors with tinnitus in multiple regression test with age adjustment. However, levels of stress-related hormones did not correlate with subjective measures including BDI, BEPSI and severity of tinnitus. In conclusion, blood stress hormones seemed to have some diagnostic and clinical value in patients with tinnitus, and serotonin is supposed to be the most important hormone in tinnitus. Further studies about the values of stress and stress hormones in tinnitus patients may lead to new approaches regarding diagnosis and clinical management of the disease.

Heterogeneous stacking of nanodot monolayers by dry pick-and-place transfer and its applications in quantum dot light-emitting diodes.

Layered assembly structures composed of nanomaterials, such as nanocrystals, have attracted considerable attention as promising candidates for new functional devices whose optical, electromagnetic and electronic behaviours are determined by the spatial arrangement of component elements. However, difficulties in handling each constituent layer in a material-specific manner limit the 3D integration of disparate nanomaterials into the appropriate heterogeneous electronics. Here we report a pick-and-place transfer method that enables the transfer of large-area nanodot assemblies. This solvent-free transfer utilizes a lifting layer and allows for the reliable transfer of a quantum dot (QD) monolayer, enabling layer-by-layer design. With the controlled multistacking of different bandgap QD layers, we are able to probe the interlayer energy transfer among different QD monolayers. By controlling the emission spectrum through such designed monolayer stacking, we have achieved white emission with stable optoelectronic properties, the closest to pure white among the QD light-emitting diodes reported so far.

Highly stretchable electric circuits from a composite material of silver nanoparticles and elastomeric fibres.

Conductive electrodes and electric circuits that can remain active and electrically stable under large mechanical deformations are highly desirable for applications such as flexible displays, field-effect transistors, energy-related devices, smart clothing and actuators. However, high conductivity and stretchability seem to be mutually exclusive parameters. The most promising solution to this problem has been to use one-dimensional nanostructures such as carbon nanotubes and metal nanowires coated on a stretchable fabric, metal stripes with a wavy geometry, composite elastomers embedding conductive fillers and interpenetrating networks of a liquid metal and rubber. At present, the conductivity values at large strains remain too low to satisfy requirements for practical applications. Moreover, the ability to make arbitrary patterns over large areas is also desirable. Here, we introduce a conductive composite mat of silver nanoparticles and rubber fibres that allows the formation of highly stretchable circuits through a fabrication process that is compatible with any substrate and scalable for large-area applications. A silver nanoparticle precursor is absorbed in electrospun poly (styrene-block-butadiene-block-styrene) (SBS) rubber fibres and then converted into silver nanoparticles directly in the fibre mat. Percolation of the silver nanoparticles inside the fibres leads to a high bulk conductivity, which is preserved at large deformations (σ ≈ 2,200 S cm(-1) at 100% strain for a 150-µm-thick mat). We design electric circuits directly on the electrospun fibre mat by nozzle printing, inkjet printing and spray printing of the precursor solution and fabricate a highly stretchable antenna, a strain sensor and a highly stretchable light-emitting diode as examples of applications.

Nanoscale patterning of colloidal quantum dots on transparent and metallic planar surfaces.

The patterning of colloidal quantum dots with nanometer resolution is essential for their application in photonics and plasmonics. Several patterning approaches, such as the use of polymer composites, molecular lock-and-key methods, inkjet printing and microcontact printing of quantum dots have been recently developed. Herein, we present a simple method of patterning colloidal quantum dots for photonic nanostructures such as straight lines, rings and dot patterns either on transparent or metallic substrates. Sub-10 nm width of the patterned line could be achieved with a well-defined sidewall profile. Using this method, we demonstrate a surface plasmon launcher from a quantum dot cluster in the visible spectrum.

Is preoperative computed tomographic density measurement of soft tissues helpful in the diagnosis of cholesteatoma?

OBJECTIVES: We undertook to verify the usefulness of computed tomography Hounsfield units (HU) in differentiating cholesteatoma from inflammatory tissue. METHODS: In 91 enrolled cases, the lesions were classified according to the gross pathology, and the specific locations of each lesion were documented by 1 surgeon within 1 day after the operation. The densities in HU of cholesteatoma and non-cholesteatoma lesions were retrospectively measured 3 times by the same examiner, and the difference between the two groups was analyzed. The interobserver reliability among the 3 examiners was assessed to verify the confidence level of the HU measurements in preoperative detection of cholesteatoma. RESULTS: The mean HU values of cholesteatoma were 35.7 to 66.6 HU, and those of non-cholesteatoma lesions were 32.9 to 51.3 HU. A general linear model-repeated-measures analysis of variance did not show any significant difference between the cholesteatoma and non-cholesteatoma lesions (p = 0.305). The general linear model-repeated-measures analysis of variance showed a significant difference of the measured HU levels among the 3 examiners (p = 0.021). CONCLUSIONS: This study showed that the HU values on preoperative computed tomography did not suffice for the detection of cholesteatoma lesions. A clinician's physical examination together with an interpretation of computed tomography is still the "gold standard" method.

Sonographic and MR findings in 2 cases of intramural pregnancy treated conservatively.

Intramural pregnancy is extremely rare and difficult to diagnose. Because of the high rate of uterine rupture in most cases, hysterectomy is often necessary. The optimal medical management for this condition is unknown. We report 2 cases of intramural pregnancy diagnosed by pelvic MRI and treated with systemic methotrexate.