RESUMO
Magnesium, calcium, and barium heteroleptic complexes were synthesized by the substitution reaction of the bis(trimethylsilyl)amide of Mg(btsa)2·DME, Ca(btsa)2·DME, and Ba(btsa)2·2DME with an ethereal group and hfac ligands (btsa = bis(trimethylsilyl)amide, DME = dimethoxyethane). The compounds Mg(dts)(hfac)2 (1), Ca(dts)(hfac)2 (2), Mg(dmts)(hfac)2 (3), Ca(dmts)(hfac)2 (4), and Ba(dmts)(hfac)2 (5) were fabricated and analyzed using various techniques, including Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, thermogravimetric analyses, and elemental analysis (dts = 2,2-dimethyl-3,6,9-trioxa-2-siladecane, dmts = 2,2-dimethyl-3,6,9,12-tetraoxa-2-silatridecane, hfac = hexafluoroacetylacetonate). The structures of complexes 2, 4, and 5 were confirmed using single-crystal X-ray crystallography; all complexes display monomeric structures. All compounds underwent trimethylsilylation of the coordinating ethereal alcohols (meeH and tmgeH) in the presence of HMDS as byproducts because of their increasing acidity originating from the electron-withdrawing hfac ligands. (meeH = 2-(2-methoxyethoxy)ethan-1-ol, tmgeH = tri(ethylene glycol) monoethyl ether, HMDS = hexamethyldisilazane).
RESUMO
We report the synthesis and characterization of novel antimony(III) complexes: Sb(mpa)3 (1), Sb(mmpa)3 (2), Sb(mdpa)3 (3), Sb(epa)3 (4), Sb(empa)3 (5), and Sb(edpa)3 (6) (mpa = N-methoxypropanamide, mmpa = N-methoxy-2-methyl-propanamide, mdpa = N-methoxy-2,2-dimethylpropanamide, epa = N-ethoxypropanamide, empa = N-ethoxy-2-methylpropanamide, and edpa = N-ethoxy-2,2-dimethylpropanamide, via a salt-elimination reaction with SbCl3 and sodium-substituted carboxamide. The molecular structure of 6 revealed the formation of a homoleptic conformer with a highly distorted pentagonal bipyramidal geometry, as determined by X-ray crystallography. Thermogravimetric analysis showed excellent volatility at elevated temperatures, with complex 4 displaying the lowest residual mass of 0.16% at 500 °C. For complexes 4, 5, and 6, the temperature at a vapor pressure of 1 Torr and the enthalpy of vaporization were estimated to be 58, 64, and 45 °C and 83.31, 103.58, and 99.93 kJ/mol, respectively.
RESUMO
This study describes the synthesis of germanium and tin complexes Ge(mdpaS)2 (1), Ge(edpaS)2 (2), Ge(bdpaS)2 (3), Ge(empaS)2 (4), Sn(mdpaS)2 (5), Sn(edpaS)2 (6), Sn(bdpaS)2 (7), and Sn(empaS)2 (8) (mdpaSH = (Z)-N-methoxy-2,2-dimethylpropanimidothioic acid; edpaSH = (Z)-N-ethoxy-2,2-dimethylpropanimidothioic acid; bdpaSH = (Z)-N-(tert-butoxy)-2,2-dimethylpropanimidothioic acid; empaSH = (Z)-N-ethoxy-2-methylpropanimidothioic acid), using newly designed N-alkoxy thioamide ligands as precursors for metal chalcogenide materials. All complexes were characterized using various analytical techniques, and the single-crystal structures of complexes 5 and 7 revealed a distorted seesaw geometry in the monomeric SnL2 form. Thermogravimetric (TG) curves showed differences between Ge compounds, which exhibited single-step weight losses, and Sn compounds, which exhibited multistep weight losses. As a result, we suggest that the synthesized complexes 1-8 are potential precursors for group IV metal chalcogenide materials.
RESUMO
Dynamic random-access memory (DRAM) capacitor electrodes, exemplified by TiN, face performance limitations owing to their relatively low work functions in addition to the formation of a low-k interfacial layer caused by their insufficient chemical stability. With recent advances in device scaling, these issues have become increasingly problematic, prompting the exploration of alternative electrode materials to replace TiN. Molybdenum dioxide (MoO2) has emerged as a promising candidate for this application, outperforming TiN due to its low resistivity, high work function (>5 eV), and excellent chemical stability. Moreover, monoclinic MoO2 exhibits a distorted rutile structure, enabling the in situ growth of high-k rutile TiO2 on MoO2 at low deposition temperatures. However, MoO2 deposition poses challenges because of its metastable nature compared to the more stable molybdenum oxide (MoOx) phases, such as MoO3 and Mo4O11. In this work, we successfully fabricated Sn-doped MoOx (TMO) films by atomic layer deposition (ALD) at 300 °C. A stabilized monoclinic MoO2 phase was achieved using ALD by incorporating SnOx into MoOx on both SiO2 and TiN substrates. The ALD TMO process comprised MoOx and SnOx subcycles, and the MoOx:SnOx subcycle ratio was varied from 100:1 to 20:1. High growth rates ranging from 0.19 to 0.34 nm/cycle were achieved for ALD TMO with varying the MoOx:SnOx subcycle ratio from 20:1 to 100:0. After post-deposition annealing at 500 °C, polycrystalline TMO films were obtained with smooth surface morphology. ALD TMO exhibited excellent interface quality with ALD TiO2, possessing a negligible low-k interfacial layer. Moreover, a rutile TiO2 film with a high dielectric constant of 136 was successfully grown on a 20% Sn-TMO electrode. Overall, this study provides a strategy to stabilize metastable MoO2 films using ALD, and it demonstrates the superiority of ALD TMO as a promising DRAM capacitor electrode material.
RESUMO
The advanced patterning process is the basis of integration technology to realize the development of next-generation high-speed, low-power consumption devices. Recently, area-selective atomic layer deposition (AS-ALD), which allows the direct deposition of target materials on the desired area using a deposition barrier, has emerged as an alternative patterning process. However, the AS-ALD process remains challenging to use for the improvement of patterning resolution and selectivity. In this study, we report a superlattice-based AS-ALD (SAS-ALD) process using a two-dimensional (2D) MoS2-MoSe2 lateral superlattice as a pre-defining template. We achieved a minimum half pitch size of a sub-10 nm scale for the resulting AS-ALD on the 2D superlattice template by controlling the duration time of chemical vapor deposition (CVD) precursors. SAS-ALD introduces a mechanism that enables selectivity through the adsorption and diffusion processes of ALD precursors, distinctly different from conventional AS-ALD method. This technique facilitates selective deposition even on small pattern sizes and is compatible with the use of highly reactive precursors like trimethyl aluminum. Moreover, it allows for the selective deposition of a variety of materials, including Al2O3, HfO2, Ru, Te, and Sb2Se3.
RESUMO
Alkoxide precursors have been highlighted for depositing carbon-free films, but their use in Atomic Layer Deposition (ALD) often exhibits a non-saturated growth. This indicates no self-limiting growth due to the chain reaction of hydrolysis or ligand decomposition caused by ß-hydride elimination. In the previous study, we demonstrated that self-limiting growth of ALD can be achieved using our newly developed precursor, hafnium cyclopentadienyl tris(N-ethoxy-2,2-dimethyl propanamido) [HfCp(edpa)3]. To elucidate the growth mechanism and the role of cyclopentadienyl (Cp) ligand in a heteroleptic alkoxide precursor, herein, we compare homoleptic and heteroleptic Hf precursors consisting of N-ethoxy-2,2-dimethyl propanamido (edpa) ligands with and without cyclopentadienyl ligand-hafnium tetrakis(N-ethoxy-2,2-dimethyl propanamido) [Hf(edpa)4] and HfCp(edpa)3. We also investigate the role of a Cp ligand in growth characteristics. By substituting an alkoxide ligand with a Cp ligand, we could modify the surface reaction during ALD, preventing undesired reactions. The last remaining edpa after Hf(edpa)4 adsorption can undergo a hydride elimination reaction, resulting in surface O-H generation. In contrast, Cp remains after the HfCp(edpa)3 adsorption. Accordingly, we observe proper ALD growth with self-limiting properties. Thus, a comparative study of different ligands of the precursors can provide critical clues to the design of alkoxide precursors for obtaining typical ALD growth with a saturation behavior.
RESUMO
In this article, we discuss the synthesis of eight novel zirconium and hafnium complexes containing amidoxime ligands as potential precursors for atomic layer deposition (ALD). Two amidoximes, viz., (E)-N'-hydroxy-N,N-dimethylacetimidamide (mdaoH) and (Z)-N'-hydroxy-N,N-dimethylpivalimidamide (tdaoH), along with their Zr and Hf homoleptic complexes, Zr(mdao)4 (1), Hf(mdao)4 (2), Zr(tdao)4 (3), and Hf(tdao)4 (4) were prepared. We further synthesized heteroleptic compounds with different physical properties by introducing cyclopentadienyl (Cp) ligand, namely, CpZr(mdao)3 (5), CpHf(mdao)3 (6), CpZr(tdao)3 (7), and CpHf(tdao)3 (8). Thermogravimetric analysis was used for the assessment of the evaporation characteristics of complexes 1, 2, 5, and 6, and it revealed multistep weight losses with high residues. On the other hand, the thermogravimetric analysis curves of complexes 3, 4, 7, and 8 comprising tdao ligands revealed single-step weight losses with moderate residues. Single-crystal X-ray diffraction studies of complexes 1, 3, and 7 showed that all of the complexes have monomeric molecular structures. Complex 7 exhibited a low melting point (75 °C), good volatility, and high thermal stability compared with other complexes. Therefore, an atomic layer deposition process for the growth of ZrO2 was developed by using ZrCp(tdao)3 (7) as a novel precursor.
RESUMO
This study describes the synthesis of 12 new germanium complexes containing ß-diketonate and/or N-alkoxy carboxamidate-type ligands as precursors for GeO2 through atomic layer deposition (ALD). A series of Ge(ß-diketonate)Cl complexes such as Ge(acac)Cl (1) and Ge(tmhd)Cl (2) were synthesized by using acetylacetone (acacH) and 2,2,6,6-tetramethyl-3,5-heptanedione (tmhdH). N-Alkoxy carboxamidate-type ligands such as N-methoxypropanamide (mpaH), N-methoxy-2,2-dimethylpropanamide (mdpaH), N-ethoxy-2-methylpropanamide (empaH), N-ethoxy-2,2-dimethylpropanamide (edpaH), and N-methoxybenzamide (mbaH) were used to afford further substituted complexes Ge(acac)(mpa) (3), Ge(acac)(mdpa) (4), Ge(acac)(empa) (5), Ge(acac)(edpa) (6), Ge(acac)(mba) (7), Ge(tmhd)(mpa) (8), Ge(tmhd)(mdpa) (9), Ge(tmhd)(empa) (10), Ge(tmhd)(edpa) (11), and Ge(tmhd)(mba) (12), respectively. Thermogravimetric analysis curves, which mostly exhibited single-step weight losses, were used to determine the evaporation properties of complexes 1-12. Interestingly, liquid complex 2 has no residue at 198 °C and therefore exhibits excellent vaporization properties and high volatility. Single-crystal X-ray diffraction studies of 1 and 7 demonstrated that the complexes had monomeric molecular structures with germanium chelated by the oxygen atoms of one or two bidentate ligands, respectively. An ALD process was developed for the growth of GeO2 using Ge(tmhd)Cl (2) as a new precursor and H2O2 as an oxidant. This study demonstrates the achievement of self-limiting growth of GeO2 films by varying the duration of injection/purge, with an observed ALD window at deposition temperatures ranging from 300 to 350 °C. The saturated growth per cycle of the GeO2 film was determined as 0.27 Å/cycle at a deposition temperature of 300 °C. The deposited films were observed to be amorphous consisting of GeO2.
RESUMO
Novel Sn precursors, Sn(tbip)2, Sn(tbtp)2, and Sn(tbta)2, were synthesized and characterized using various analytical techniques and density functional theory calculations. These precursors contained cyclic amine ligands derived from iminopyrrolidine. X-ray crystallography revealed the formation of monomeric SnL2 with distorted seesaw geometry. Thermogravimetric analysis demonstrated the exceptional volatility of all complexes. Sn(tbtp)2 showed the lowest residual weight of 2.7% at 265 °C. Sn3N4 thin films were successfully synthesized using Sn(tbtp)2 as the Sn precursor and NH3 plasma. The precursor exhibited ideal characteristics for atomic layer deposition, with a saturated growth per cycle value of 1.9 Å cy-1 and no need for incubation when the film was deposited at 150-225 °C. The indirect optical bandgap of the Sn3N4 film was approximately 1-1.2 eV, as determined through ultraviolet-visible spectroscopy. Therefore, this study suggests that the Sn3N4 thin films prepared using the newly synthesized Sn precursor are suitable for application in thin-film photovoltaic devices.
RESUMO
Novel barium heteroleptic complexes were synthesized through the substitution of the bis(trimethylsilyl)amide of Ba(btsa)2·2DME with aminoalkoxide and ß-diketonate ligands. Compounds [Ba(ddemap)(tmhd)]2 (1) and [Ba(ddemmp)(tmhd)]2 (2) were obtained and analyzed through Fourier transform infrared spectroscopy, nuclear magnetic resonance, thermogravimetric analysis, and elemental analysis (ddemapH = 1-(dimethylamino)-5-((2-(dimethylamino)ethyl) (methyl)amino)pentan-3-ol and ddemmpH = 1-(dimethylamino)-5-((2-(dimethylamino)ethyl) (methyl)amino)-3-methylpentan-3-ol). In single-crystal X-ray crystallography, complex 1 exhibited a dimeric structure with µ2-O bonds of the ddemap ligand. All complexes exhibited high volatility and could be sublimed under reduced pressure (0.5 Torr) at 160 °C, indicating that these complexes are promising candidates as atomic layer deposition or chemical vapor deposition precursors for the growth of barium-containing thin films.
RESUMO
The precisely tailored refractive index of optical materials is the key to utilizing and manipulating light during its propagation through the matrix, thereby improving their application performances. In this paper, mesoporous metal fluoride films with engineered composition (MgF2 :LaF3 ) are demonstrated to achieve finely tunable refractive indices. These films are prepared using a precursor-derived one-step assembly approach via the simple mixing of precursor solutions (Mg(CF3 OO)2 and La(CF3 OO)3 ); then pores are formed simultaneously during solidification owing to the inherent instability of La(CF3 OO)3 . The mesoporous structures are realized through Mg(CF3 OO)2 and La(CF3 OO)3 ions, which interacted with each other based on their electrostatic forces, providing a wide range of refractive indices (from 1.37 to 1.16 at 633 nm). Furthermore, it is systematically several MgF2(1-x) -LaF3(x) layers with different compositions (x = 0.0, 0.3, and 0.5) to form the graded refractive index coating that is optically consecutive between the substrate and the air for broadband and omnidirectional antireflection. An average transmittance of ≈98.03% (400-1100 nm) is achieved with a peak transmittance of ≈99.04% (at 571 nm), and the average antireflectivity is maintained at ≈15.75% even at an incidence of light of 65° (400-850 nm).
RESUMO
To substitute corrosive halogen ligands, we designed and synthesized novel tungsten complexes containing amido ligands, W(DMEDA)3 (1) and W(DEEDA)3 (2) (DMEDA = N,N'-dimethylethylenediamido; DEEDA = N,N'-diethylethylenediamido). Complexes 1 and 2 were characterized by 1H NMR, 13C NMR, FT-IR, and elemental analysis. The pseudo-octahedral molecular structure of 1 was confirmed by single-crystal X-ray crystallography. The thermal properties of 1 and 2 were analyzed by thermogravimetric analysis (TGA), which confirmed that the precursors were volatile and exhibited adequate thermal stability. Additionally, the WS2 deposition test was performed using 1 in thermal chemical vapor deposition (thermal CVD). Further analysis of the surface of the thin films was conducted using Raman spectroscopy, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS).
RESUMO
Strontium ß-diketonate complexes were synthesized by the substitution reaction of the bis(trimethylsilyl) amide of Sr(btsa)2·2DME with an ethereal group and ß-diketonate ligands. The compounds [Sr(tmge)(btsa)]2 (1), [Sr(tod)(btsa)]2 (2), Sr(tmgeH)(tfac)2 (3), Sr(tmgeH)(acac)2 (4), Sr(tmgeH)(tmhd)2 (5), Sr(todH)(tfac)2 (6), Sr(todH)(acac)2 (7), Sr(todH)(tmhd)2 (8), Sr(todH)(hfac)2 (9), Sr(dmts)(hfac)2 (10), [Sr(mee)(tmhd)2]2 (11), and Sr(dts)(hfac)2·DME (12) were obtained and analyzed by various techniques, including FT-IR, NMR, TGA (thermogravimetric analyses), and elemental analysis. Complexes 1, 3, 8, 9, 10, 11, and 12 were further structurally confirmed by single-crystal X-ray crystallography, where complexes 1 and 11 showed dimeric structures with µ2-O bonds of ethereal groups or tmhd ligands, and complexes 3, 8, 9, 10, and 12 displayed monomeric structures. Interestingly, compounds 10 and 12, which preceded trimethylsilylation of the coordinating ethereal alcohols such as tmhgeH and meeH in the presence of HMDS as by-products due to highly increasing acidity of them, originated from electron-withdrawing two hfac ligands.
RESUMO
This paper reports the synthesis of three novel titanium complexes containing amidoxime ligands as potential precursors for titanium nitride (TiN) thin films fabricated using atomic layer deposition (ALD). A series of ligands, viz., N'-methoxy-N-methylacetimidamide (mnnoH), N'-ethoxy-N-methylacetimidamide (ennoH), and N'-methoxy-N-methylbenzimidamide (pnnoH), were successfully synthesized and used to produce Ti(mnno)(NMe2)3 (4), Ti(enno)(NMe2)3 (5), and Ti(pnno)(NMe2)3 (6). Thermogravimetric analysis curves of complexes 4-6 revealed a single-step weight loss up to 200 °C. Pyrolysis occurred beyond 200 °C. Among the three new complexes, 5 was liquid at room temperature. Therefore, TiN was synthesized by ALD using Ti(enno)(NMe2)3 (5) as a novel precursor. A TiN thin film was deposited from the Ti(enno)(NMe2)3 (5) precursor and NH3 plasma, and self-limiting growth was achieved by varying the injection/purge duration. TiN thin film growths were observed with a growth per cycle (GPC) of 0.05-0.13 nm·cy-1 at deposition temperatures between 150 and 300 °C, while the measured resistivity was as low as 420 µΩ·cm. The high reactivity of the precursor promotes nucleation, resulting in TiN thin films with smooth, good step coverage and preferentially orientated microstructure.
RESUMO
High-quality lead sulfide (PbS) films are deposited on selected substrate chemistries by an H2 S-free metal-organic chemical vapor deposition (MOCVD) process using a single-source metal-organic complex (Pb(dmampS)2 ). The complex is synthesized via a salt metathesis reaction between PbCl2 and lithium 1-(dimethylamino)-2-methylpropane-2-thiolate (Li(dmampS)) in diethyl ether. Subsequent film deposition is conducted by a simple thermolysis process in the absence of H2 S, yet chemical and structural analysis confirm chemically stoichiometric and homogenous films. Mechanistic studies with electron impact mass spectroscopy (EIMS) and gas chromatography mass spectroscopy (GCMS) suggest the selective cleavage of C-S bonds in the complex as the reason for the facile PbS formation with negligible impurity incorporation. The high crystallinity, low hole concentrations, and charge transport properties comparable and in many cases superior to films produced by atomic layer deposition (ALD) testify to the quality of the films. Lastly, rigid and flexible photodetectors fabricated with the PbS films exhibit considerably high photocurrents, reliable switching characteristics, and high sensitivity over a broad spectral bandwidth, highlighting the potential for realizing practical broadband photodetectors.
RESUMO
Van der Waals (vdW) heterostructures have drawn much interest over the last decade owing to their absence of dangling bonds and their intriguing low-dimensional properties. The emergence of 2D materials has enabled the achievement of significant progress in both the discovery of physical phenomena and the realization of superior devices. In this work, the group IV metal chalcogenide 2D-layered Ge4 Se9 is introduced as a new selection of insulating vdW material. 2D-layered Ge4 Se9 is synthesized with a rectangular shape using the metalcorganic chemical vapor deposition system using a liquid germanium precursor at 240 °C. By stacking the Ge4 Se9 and MoS2 , vdW heterostructure devices are fabricated with a giant memory window of 129 V by sweeping back gate range of ±80 V. The gate-independent decay time reveals that the large hysteresis is induced by the interfacial charge transfer, which originates from the low band offset. Moreover, repeatable conductance changes are observed over the 2250 pulses with low non-linearity values of 0.26 and 0.95 for potentiation and depression curves, respectively. The energy consumption of the MoS2 /Ge4 Se9 device is about 15 fJ for operating energy and the learning accuracy of image classification reaches 88.3%, which further proves the great potential of artificial synapses.
RESUMO
A new heteroleptic complex series of tin was synthesized by the salt metathesis reaction of SnX2 (X = Cl, Br, and I) with aminoalkoxide and various N-alkoxy-functionalized carboxamide ligands. The complexes, [ClSn(dmamp)]2 (1), [BrSn(dmamp)]2 (2), and [ISn(dmamp)]2 (3), were prepared from the salt metathesis reaction of SnX2 with one equivalent of dmamp; [Sn(dmamp)(empa)]2 (4), [Sn(dmamp)(mdpa)]2 (5), and [Sn(dmamp)(edpa)]2 (6) were prepared via the salt metathesis reaction using complex 2 with one equivalent of N-alkoxy-functionalized carboxamide ligand. Complexes 1-5 displayed dimeric molecular structures with tin metal centers interconnected by µ2-O bonding via the alkoxy oxygen atom. The molecular structures of complexes 1-5 showed distorted trigonal bipyramidal geometries with lone pair electrons in the equatorial position. Using complex 6 as a tin precursor, SnO x films were deposited by chemical solution deposition (CSD) and subsequent post-deposition annealing (PDA) at high temperatures. SnO and SnO2 films were selectively obtained under controlled PDA atmospheres of argon and oxygen, respectively. The SnO films featured a tetragonal romarchite structure with high crystallinity and a preferred growth orientation along the (101) plane. They also exhibited a lower transmittance of >52% at 400 nm due to an optical band gap of 2.9 eV. In contrast, the SnO2 films exhibited a tetragonal cassiterite crystal structure and an extremely high transmittance of >97% at 400 nm was observed with an optical band gap of 3.6 eV.
RESUMO
This paper describes the synthesis of eight novel zirconium and hafnium complexes containing N-alkoxy carboxamidate-type ligands, as potential precursors for metal oxides and atomic layer deposition (ALD) for HfO2. A series of ligands, viz., N-ethoxy-2,2-dimethylpropanamide (edpaH), N-ethoxy-2-methylpropanamide (empaH), and N-methoxy-2,2-dimethylpropanamide (mdpaH), were used to afford complexes Zr(edpa)4 (1), Hf(edpa)4 (2), Zr(empa)4 (3), Hf(empa)4 (4), Zr(mdpa)4 (5), Hf(mdpa)4 (6), ZrCp(edpa)3 (7), and HfCp(edpa)3 (8). Thermogravimetric analysis curves assessed for the evaporation characteristics of complexes 1-8 revealed single-step weight losses with low residues, except for the mdpa-containing complexes. Single-crystal X-ray diffraction studies of 1, 2, 5, and 6 revealed that all the complexes have monomeric molecular structures, with the central metal ion surrounded by eight oxygen atoms from the four bidentate alkoxyalkoxide ligands. Among the complexes prepared, 8 exhibited a low melting point (64 °C), good volatility (1 Torr at 112 °C), high thermal stability, and excellent endurance over 6 weeks at 120 °C. Therefore, an ALD process for the growth of HfO2 was developed using HfCp(edpa)3 (8) as a novel precursor. Furthermore, the HfO2 film exhibited a low capacitance equivalent oxide thickness of â¼1.5 nm, with Jg as low as â¼3 × 10-4 A/cm2 at Vg -1 V in a metal-insulator-semiconductor capacitor (Au/HfO2/p-Si).
RESUMO
A series of Ta(V) t Bu-imido/N-alkoxy carboxamide complexes, TaCl2(N t Bu)(pyridine)(edpa) (1), TaCl(N t Bu)(edpa)2 (2), Ta(N t Bu)(edpa)3 (3), TaCl2(N t Bu)(pyridine)(mdpa) (4), and Ta(N t Bu)(mdpa)3 (5), were successfully synthesized by metathesis reactions between Ta(N t Bu)Cl3(py)2 and several equivalents of Na(edpa) (edpaH = N-ethoxy-2,2-dimethylpropanamide) and Na(mdpa) (mdpaH = N-methoxy-2,2-dimethylpropanamide). Furthermore, complexes 3 and 5 were simply transformed to new dimeric structures [Ta(µ2-O)(edpa)3]2 (6) and [Ta(µ2-O)(mdpa)3]2 (7) with the elimination of the N t Bu imido group by air exposure. Compounds 1-7 were characterized by 1H and 13C nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis (TGA), and single-crystal X-ray diffraction. Single-crystal X-ray diffraction analysis revealed that complexes 3 and 5 have a distorted pentagonal bipyramidal geometry around the central Ta atom, with three monoanionic bidentate N-alkoxy carboxamide ligands and one t Bu imido ligand saturating the coordination of tantalum ions. TGA revealed that complexes 3 and 5 had superior thermal characteristics and stability. These complexes could potentially be applied as precursors for tantalum oxide thin films.
RESUMO
New heteroleptic strontium complexes were synthesized using substitution reaction of bis(trimethylsilyl)amide of Sr(btsa)2·2DME with aminoalkoxide and ß-diketonate ligands. The complexes [Sr(bdmp)(btsa)]2·2THF (1), [Sr(bdeamp)(btsa)]2 (2), [Sr(dadamb)(btsa)]2 (3), [Sr(bdmp)(hfac)]3 (4), [Sr(bdeamp)(hfac)]3 (5), [Sr(dadamb)(hfac)]3 (6), and [Sr3(dadamb)4(tmhd)2] (7) were prepared and characterized by means of various analysis techniques such as Fourier transform infrared, NMR, thermogravimetric analysis, and elemental analysis. Complexes 1-3 were further structurally confirmed by single-crystal X-ray crystallography, and they displayed dimeric structures in which strontium atoms were connected by alkoxide oxygen atoms of the µ2 type. Compound 1 has a trigonal prismatic structure, whereas 2 and 3 have a distorted square pyramidal structure. In complexes 5-7, trimeric structures were obtained with strontium atoms connected by µ3-O bonds of alkoxide oxygen atoms and µ2-O bonds of alkoxide and ß-diketonate oxygen atoms. The crystal structures of 5, 6, and 7 showed distorted capped octahedral geometry, while 7 (middle Sr atom) displayed a distorted trigonal prism geometry. Complexes 5-7 displayed â¼70% mass loss in the temperature range from 25 to 315 °C.