Synthesis and application of BODIPY-based fluorescent labeling tag for oligosaccharide and N-linked glycan analysis by high-performance liquid chromatography with fluorescence detection.

BACKGROUND: Glycosylation analysis is still challenging, not only because of the extreme structure complexity and conjugation diversity of glycans but also because of instrumental aspects such as the sensitivity limits of analyses. Therefore, glycan analysis by chromatographic methods is very often combined with fluorescence detection in addition to MS. The majority of fluorescent labeling employed before LC separation is based on 2-aminobenzamide, which has several disadvantages such as low labeling yield, poor fluorescence properties, and MS ionization efficiency. Therefore, even after several decades of development of new labels, there is still a need for new labeling tags with improved characteristics. RESULTS: We present the application of a newly synthesized fluorescent label designed for oligosaccharide and glycan analysis by high-performance liquid chromatography with fluorescence detection (HPLC/FLD). The novel hydrazide derivative of dipyrrometheneboron difluoride (BODIPY) was synthesized from 2,4-dimethylpyrrole, methyl succinyl chloride, and boron trifluoride etherate followed by a reaction with hydrazine. The synthesized label was characterized by several analytical methods including NMR, UV/Vis and fluorescence spectroscopy, and mass spectrometry. The labeling reaction via hydrazone formation chemistry was optimized by labeling of maltooligosaccharide standards. The analysis of maltohexaose labeled by BODIPY-hydrazide followed by HPLC/FLD analysis provided the limit of detection in the low tens of femtomole. The presented method based on fluorescence detection is at least 30 times more sensitive than the standard approach employing labeling by 2-aminobenzamide. In addition, the labeling method by BODIPY-hydrazide was used for N-linked glycan profiling of several glycoproteins (ribonuclease B, immunoglobulin G) by RP-HPLC/FLD as well as HILIC/FLD analysis. SIGNIFICANCE: This work represents the design, synthesis, and application of a new fluorescent label based on the BODIPY core and hydrazone formation chemistry for oligosaccharide and glycan analysis by HPLC/FLD. The proposed approach significantly improved the oligosaccharide and glycan analysis in comparison to the commonly used procedure employing 2-aminobenzamide.

Sulfate supplementation affects nutrient and photosynthetic status of Arabidopsis thaliana and Nicotiana tabacum differently under prolonged exposure to cadmium.

Hydroponic experiments were performed to examine the effect of prolonged sulfate limitation combined with cadmium (Cd) exposure in Arabidopsis thaliana and a potential Cd hyperaccumulator, Nicotiana tabacum. Low sulfate treatments (20 and 40 µM MgSO4) and Cd stress (4 µM CdCl2) showed adverse effects on morphology, photosynthetic and biochemical parameters and the nutritional status of both species. For example, Cd stress decreased NO3- root content under 20 µM MgSO4 to approximately 50% compared with respective controls. Interestingly, changes in many measured parameters, such as chlorophyll and carotenoid contents, the concentrations of anions, nutrients and Cd, induced by low sulfate supply, Cd exposure or a combination of both factors, were species-specific. Our data showed opposing effects of Cd exposure on Ca, Fe, Mn, Cu and Zn levels in roots of the studied plants. In A. thaliana, levels of glutathione, phytochelatins and glucosinolates demonstrated their distinct involvement in response to sub-optimal growth conditions and Cd stress. In shoot, the levels of phytochelatins and glucosinolates in the organic sulfur fraction were not dependent on sulfate supply under Cd stress. Altogether, our data showed both common and species-specific features of the complex plant response to prolonged sulfate deprivation and/or Cd exposure.

Adamantane-Substituted Purines and Their ß-Cyclodextrin Complexes: Synthesis and Biological Activity.

Cyclin-dependent kinases (CDKs) play an important role in the cell-division cycle. Synthetic inhibitors of CDKs are based on 2,6,9-trisubstituted purines and are developed as potential anticancer drugs; however, they have low solubility in water. In this study, we proved that the pharmaco-chemical properties of purine-based inhibitors can be improved by appropriate substitution with the adamantane moiety. We prepared ten new purine derivatives with adamantane skeletons that were linked at position 6 using phenylene spacers of variable geometry and polarity. We demonstrated that the adamantane skeleton does not compromise the biological activity, and some of the new purines displayed even higher inhibition activity towards CDK2/cyclin E than the parental compounds. These findings were supported by a docking study, which showed an adamantane scaffold inside the binding pocket participating in the complex stabilisation with non-polar interactions. In addition, we demonstrated that ß-cyclodextrin (CD) increases the drug's solubility in water, although this is at the cost of reducing the biochemical and cellular effect. Most likely, the drug concentration, which is necessary for target engagement, was decreased by competitive drug binding within the complex with ß-CD.

Separation of labeled isomeric oligosaccharides by hydrophilic interaction liquid chromatography - the role of organic solvent in manipulating separation selectivity of the amide stationary phase.

The advantages of using mixtures of organic solvents for the separation of labeled oligosaccharides on the amide stationary phase under hydrophilic interaction liquid chromatography conditions are presented. The effect of the type of buffer as well as solvent or their mixtures on retention of uracil, saccharide labeling reagents (2-aminobenzoic acid, 2-aminobenzamide, ethyl 4-aminobenzoate, procainamide), and corresponding labeled saccharides were evaluated. The successful isocratic separation of labeled isomeric trisaccharides (maltotriose, panose, and isomaltotriose) was achieved in the mobile phase consisting of a 90% (v/v) mixture of organic solvents (methanol/acetonitrile 60:40) and 10% (v/v) 30 mM ammonium formate, pH 3.3. Changing the volume ratio between methanol/acetonitrile from 60:40 to 50:50 (v/v) allowed to obtain the separation of di-, tri-, and tetrasaccharides labeled by ethyl 4-aminobenzoate in less than 10.5 min.

Characterization of multi-cationic aminopyrene-based tag for oligosaccharide labeling by capillary electrophoresis with laser-induced fluorescence detection.

In this work, we characterize a previously synthesized multi-cationic aminopyrene-based labeling tag for oligosaccharide analysis by capillary electrophoresis with laser-induced fluorescence detection (CE/LIF). The fluorescent tag, 4,4',4''-(8-aminopyrene-1,3,6-trisulfonyl)tris(1-methylpiperazine) (APTMP), was characterized by reaction with standard maltooligosaccharides and the labeling parameters such as fluorescent tag concentration, labeling temperature, and time as well as influence of a reducing agent and its solvent were investigated in terms of labeling efficiency. The nanomolar limit of detection of CE/LIF analysis of APTMP labeled maltopentaose was determined. However, significant amount of the oligosaccharides was reduced to alditols, which negatively affects the yield and rate of the labeling reaction. Under optimized conditions, a highly reproducible labeling by multi-cationic APTMP was obtained; however, the most commonly used labeling by multi-anionic 8-aminopyrene-1,3,6-trisulfonic acid trisodium salt (APTS) is superior compared to APTMP labeling. Lower reactivity of APTMP compared to APTS can be explained by the loss of nucleophilicity induced by substitution of the sulfonate groups with more electron-withdrawing aminosulfonyl ones. On contrary, APTMP is still a promising tag for oligosaccharide labeling followed by CE-MS in a positive ion mode, which is considered to be more sensitive than MS detection of APTS in a negative ion mode.

No-additive salting-out liquid-liquid extraction-A tool for purification of positively charged compounds from highly salted reaction mixtures.

A novel and original application of salting-out assisted liquid-liquid extraction is presented. This technique was used to purify the final reaction products (quaternary ammonium salts) from unreacted components and by-products present in multiple excesses. The partition of two structurally related compounds as (2-aminoethyl)trimethylammonium salt (a labeling reagent) and a derivative of [2-(imidazoline-1-yl)ethyl]trimethylammonium salt (a final reaction product of N-acetylglucosamine labeling by (2-aminoethyl)trimethylammonium salt) between acetonitrile-rich and water-rich layers was monitored by hydrophilic interaction chromatography with electrospray ionization mass spectrometry. Despite the poor solubility of both highly polar substances in solutions containing a high concentration of acetonitrile, the main portion of the labeling reagent (72%) can be removed from the crude reaction mixture in the first extraction step using 95% acetonitrile/5% water as an extraction solvent. The purified final reaction product contained only 2% of the labeling reagent, and it was suitable for analysis by direct infusion mass spectrometry to confirm its identity. The capability of the suggested purification protocol to process small-volume highly salted reaction mixtures was also proven by analysis of saccharide mixture containing glucose, maltose, and maltotriose labeled by the positively charged tag.

Enzybiotics LYSSTAPH-S and LYSDERM-S as Potential Therapeutic Agents for Chronic MRSA Wound Infections.

Antibacterial antibiotic therapy has played an important role in the treatment of bacterial infections for almost a century. The increasing resistance of pathogenic bacteria to antibiotics leads to an attempt to use previously neglected antibacterial therapies. Here we provide information on the two recombinantly modified antistaphylococcal enzymes derived from lysostaphin (LYSSTAPH-S) and endolysin (LYSDERM-S) derived from kayvirus 812F1 whose target sites reside in the bacterial cell wall. LYSSTAPH-S showed a stable antimicrobial effect over 24-h testing, even in concentrations lower than 1 µg/mL across a wide variety of epidemiologically important sequence types (STs) of methicillin-resistant Staphylococcus aureus (MRSA), especially in the stationary phase of growth (status comparable to chronic infections). LYSDERM-S showed a less potent antimicrobial effect that lasted only a few hours at concentrations of 15 µg/mL and higher. Our data indicate that these antimicrobial enzymes could be of substantial help in the treatment of chronic MRSA wound infections.

Comparison of oligosaccharide labeling employing reductive amination and hydrazone formation chemistries.

In this work, we compare labeling by two negatively charged fluorescent labels, 8-aminopyrene-1,3,6-trisulfonic acid (APTS) and 8-(2-hydrazino-2-oxoethoxy)pyrene-1,3,6-trisulfonic acid (Cascade Blue hydrazide [CBH]). Effectiveness of the labeling chemistries were investigated by 4-hydroxybenzaldehyde and maltoheptaose followed by LC/UV-MS and CE/LIF analysis, respectively. The reaction yield of APTS labeling was determined to be only ∼10%. This is due to reduction of almost 90% of the analyte by sodium cyanoborohydride to alcohol, which cannot be further labeled via reductive amination. However, the CBH labeling provides ∼90% reaction yield based on the LC/UV-MS measurements. The significantly higher labeling yield was also confirmed by CE/LIF measurements. Finally, the more effective hydrazone formation technique of CBH was characterized and applied for N-linked glycan analysis by CE/LIF.

Multi-cationic aminopyrene-based labeling tags for oligosaccharide analysis by capillary electrophoresis-mass spectrometry.

In this work, new multi-cationic aminopyrene-based labeling tags were designed and synthesized for oligosaccharide analysis by capillary electrophoresis-mass spectrometry (CE-MS). The starting compound, 8-aminopyrene-1,3,6-trisulfonic acid trisodium salt, was modified in order to form a sulfonamide derivative having three tertiary amines in the label structure. The sulfonamide derivative was further methylated to generate three permanently charged quaternary ammonium moieties on the label. The synthesized labels were characterized by NMR, IR, UV/Vis, fluorescence spectroscopy and mass spectrometry. Furthermore, the labels were applied for maltooligosaccharide standards as well as N-linked glycans labeling via reductive amination and followed by CE-MS analysis. The CE-MS analysis of maltooligosaccharides labeled by these newly synthesized labels provided the sub-micromolar limit of detection based on the extracted ion electropherogram signals.

Investigation of a side reaction occurring during N-linked glycan labeling by cationic tags.

Capillary electrophoresis-mass spectrometry was applied for the analysis of oligosaccharides and N-linked glycans with an attached charge label facilitating electrophoretic migration and electrospray ionization efficiency. Several different labeling strategies have been tested with different tags and tagging reactions including reductive amination and hydrazone formation. However, a formation of multiple labeled N-linked glycans was observed by CE-MS in a positive ion mode when positively charged labels such as aliphatic amines containing a quaternary ammonium group were attached to N-linked glycans by reductive amination. A reaction mechanism explaining a side reaction occurring during the labeling and the multiple product formation was proposed and confirmed by using isotopically labeled N-acetylglucosamine. Finally, it was confirmed that derivatization of sugars via a hydrazone formation can be a simpler method with a high reaction yield suitable for high sensitive CE-ESI/MS analyses of N-linked glycans.

Determination of short-term changes in levoglucosan and dehydroabietic acid in aerosols with Condensation Growth Unit - Aerosol Counterflow Two-Jets Unit - LC-MS.

Residential areas in urban agglomerations and also in the countryside are often burdened with high concentrations of aerosol in winter, this originating from local combustion sources. Aerosol sources can be identified by a monitoring of organic markers of biomass burning. Abundant markers of biomass and softwood burning are levoglucosan and dehydroabietic acid, respectively. The aim of this research was to develop an analytical method for the determination of levoglucosan and dehydroabietic acid in aerosol over short time periods involving aerosol sampling into liquid samples, quantitative pre-concentration of analytes, and their determination by liquid chromatography - mass spectrometry. A Condensation Growth Unit - Aerosol Counterflow Two-Jets Unit (CGU-ACTJU) sampler was used for the quantitative collection of aerosol directly into water. Dehydroabietic acid was pre-concentrated from the aqueous phase by solid phase extraction (C-18). Afterwards, levoglucosan in water samples was concentrated on a vacuum evaporator. The detection limits of levoglucosan and dehydroabietic acid were 28 ng m-3 and 5.5 ng m-3, respectively. The results obtained by the developed method were compared with an independent determination of both markers in aerosol by means of the sampling of aerosols on a filter and subsequent analysis by GC-MS. The developed method demonstrated sufficient agreement with the independent determination for generated standard aerosol as well as for urban aerosol over an eight-day winter campaign. The presented method allows the monitoring of concentration changes in biomass burning markers in 2-h intervals.

Multi-charged labeling of oligosaccharides and N-linked glycans by hexahistidine-based tags for capillary electrophoresis-mass spectrometry analysis.

The labeling by amino acids and peptides was investigated for sensitive and fast analyses of oligosaccharides and N-linked glycans by capillary electrophoresis-mass spectrometry (CE-MS). Peptide tags with a various number of histidine residues were tested for maltooligosaccharide labeling in order to investigate the effect of the size of labels and a number of charges on CE-MS analysis. Nevertheless, the reductive amination labeling of N-linked glycans by a hexahistidine tag resulted in a multiple products formation, therefore a peptide tag was modified by hydrazine functionality in order to perform labeling by hydrazone formation chemistry. This labeling approach significantly improved sensitivity with LOD of labeled maltopentaose determined to be 40 nmol/L and also significantly reduced separation time of neutral maltooligosaccharides and N-linked glycans released from bovine ribonuclease B. Furthermore, the labeling by this multi-cationic peptide hydrazine tag also allowed performing analysis of acidic glycans by CE-MS in a positive ion mode as demonstrated by separation of sialylated N-linked glycans released from bovine fetuin.

Different behavior of dextrans in positive-ion and negative-ion mass spectrometry.

A mass spectrometric (MS) comparative study of dextran samples using two different ionization techniques (matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI)) in both positive- and negative-ion modes is reported. The experiments were carried out with two polydisperse dextrans (1000 and 8800 Da) and isomaltotriose. In the positive-ion mode, the expected alkali metal ion adducts of dextrans were observed in both techniques. In contrast, the expected preferential formation of deprotonated molecules [M - H](-) was not confirmed in negative mode MALDI time-of-flight (TOF) MS, where the series of ions [M(x)- H +42](-) or [M(x+1)- H - 120](-), coming either from some addition or fragmentation, were observed. In both ionization techniques, these ions formed the main distributions of dextrans in the negative-ion mode. It seems that the negative molecular ions formed from the alpha1 --> 6 linkage of polyglucose oligomers easily decompose, and the product ions [M - H - 120](-) markedly dominate. The fragmentation experiments and especially the investigation of the fundamental role of the nozzle-skimmer potential in ESI-MS supported our explanation of the observed behavior because its higher values caused higher fragmentation. The experiments with isomaltotriose excluded any addition of 42 Da during the MS procedures, which is not distinguishable from the loss of 120 Da in the case of polydisperse dextrans. MALDI-TOFMS was found to be more sensitive for the detection of higher oligosaccharides and ESI-MS more useful for structural studies.