Comparability exercise of critical quality attributes of clinical-grade human mesenchymal stromal cells from the Wharton's jelly: single-use stirred tank bioreactors versus planar culture systems.

BACKGROUND AIMS: The increasing demand of clinical-grade mesenchymal stromal cells (MSCs) for use in advanced therapy medicinal products (ATMPs) require a re-evaluation of manufacturing strategies, ensuring scalability from two-dimensional (2D) surfaces to volumetric (3D) productivities. Herein we describe the design and validation of a Good Manufacturing Practice-compliant 3D culture methodology using microcarriers and 3-L single-use stirred tank bioreactors (STRs) for the expansion of Wharton's jelly (WJ)-derived MSCs in accordance to current regulatory and quality requirements. METHODS: MSC,WJ were successfully expanded in 3D and final product characterization was in conformity with Critical Quality Attributes and product specifications previously established for 2D expansion conditions. RESULTS: After 6 days of culture, cell yields in the final product from the 3D cultures (mean 9.48 × 108 ± 1.07 × 107 cells) were slightly lower but comparable with those obtained from 2D surfaces (mean 9.73 × 108 ± 2.36 × 108 cells) after 8 days. In all analyzed batches, viability was >90%. Immunophenotype of MSC,WJ was highly positive for CD90 and CD73 markers and lacked of expression of CD31, CD45 and HLA-DR. Compared with 2D expansions, CD105 was detected at lower levels in 3D cultures due to the harvesting procedure from microcarriers involving trypsin at high concentration, and this had no impact on multipotency. Cells presented normal karyotype and strong immunomodulatory potential in vitro. Sterility, Mycoplasma, endotoxin and adventitious virus were negative in both batches produced. CONCLUSIONS: In summary, we demonstrated the establishment of a feasible and reproducible 3D bioprocess using single-use STR for clinical-grade MSC,WJ production and provide evidence supporting comparability of 3D versus 2D production strategies. This comparability exercise evaluates the direct implementation of using single-use STR for the scale-up production of MSC,WJ and, by extension, other cell types intended for allogeneic therapies.

Use of Multipotent Mesenchymal Stromal Cells, Fibrin, and Scaffolds in the Production of Clinical Grade Bone Tissue Engineering Products.

Tissue engineering products (TEP) are a new type of medicines resulting from the combination of cells, scaffolds, and/or signalling factors, which can be used for the regeneration of damaged tissues thus opening new avenues for the treatment of complex conditions. However, such combination of biologically active elements, particularly living cells, poses an unprecedented challenge for their production under pharmaceutical standards.In the methods presented here, we formulated two types of TEP based on the use of multipotent mesenchymal stromal cells with osteogenic potential combined with osteoinductive and osteoconductive bony particles from tissue bank embedded in a fibrin hydrogel that, altogether, can induce the generation of new tissue while adapting to the diverse architecture of bony defects. In agreement with pharmaceutical quality and regulatory requirements, procedures presented herein can be performed in compliance with current good manufacturing practices and be readily implemented in straightforward facilities at hospitals and academic institutions.

First-in-human PeriCord cardiac bioimplant: Scalability and GMP manufacturing of an allogeneic engineered tissue graft.

BACKGROUND: Small cardiac tissue engineering constructs show promise for limiting post-infarct sequelae in animal models. This study sought to scale-up a 2-cm2 preclinical construct into a human-size advanced therapy medicinal product (ATMP; PeriCord), and to test it in a first-in-human implantation. METHODS: The PeriCord is a clinical-size (12-16 cm2) decellularised pericardial matrix colonised with human viable Wharton's jelly-derived mesenchymal stromal cells (WJ-MSCs). WJ-MSCs expanded following good manufacturing practices (GMP) met safety and quality standards regarding the number of cumulative population doublings, genomic stability, and sterility. Human decellularised pericardial scaffolds were tested for DNA content, matrix stiffness, pore size, and absence of microbiological growth. FINDINGS: PeriCord implantation was surgically performed on a large non-revascularisable scar in the inferior wall of a 63-year-old male patient. Coronary artery bypass grafting was concomitantly performed in the non-infarcted area. At implantation, the 16-cm2 pericardial scaffold contained 12·5 × 106 viable WJ-MSCs (85·4% cell viability; <0·51 endotoxin units (EU)/mL). Intraoperative PeriCord delivery was expeditious, and secured with surgical glue. The post-operative course showed non-adverse reaction to the PeriCord, without requiring host immunosuppression. The three-month clinical follow-up was uneventful, and three-month cardiac magnetic resonance imaging showed ~9% reduction in scar mass in the treated area. INTERPRETATION: This preliminary report describes the development of a scalable clinical-size allogeneic PeriCord cardiac bioimplant, and its first-in-human implantation. FUNDING: La Marató de TV3 Foundation, Government of Catalonia, Catalan Society of Cardiology, "La Caixa" Banking Foundation, Spanish Ministry of Science, Innovation and Universities, Institute of Health Carlos III, and the European Regional Development Fund.

Assessment of biodistribution using mesenchymal stromal cells: Algorithm for study design and challenges in detection methodologies.

BACKGROUND AIMS: Biodistribution of candidate cell-based therapeutics is a critical safety concern that must be addressed in the preclinical development program. We aimed to design a decision tree based on a series of studies included in actual dossiers approved by competent regulatory authorities, noting that the design, execution and interpretation of pharmacokinetics studies using this type of therapy is not straightforward and presents a challenge for both developers and regulators. METHODS: Eight studies were evaluated for the definition of a decision tree, in which mesenchymal stromal cells (MSCs) were administered to mouse, rat and sheep models using diverse routes (local or systemic), cell labeling (chemical or genetic) and detection methodologies (polymerase chain reaction [PCR], immunohistochemistry [IHC], fluorescence bioimaging, and magnetic resonance imaging [MRI]). Moreover, labeling and detection methodologies were compared in terms of cost, throughput, speed, sensitivity and specificity. RESULTS: A decision tree was defined based on the model chosen: (i) small immunodeficient animals receiving heterologous MSC products for assessing biodistribution and other safety aspects and (ii) large animals receiving homologous labeled products; this contributed to gathering data not only on biodistribution but also on pharmacodynamics. PCR emerged as the most convenient technique despite the loss of spatial information on cell distribution that can be further assessed by IHC. DISCUSSION: This work contributes to the standardization in the design of biodistribution studies by improving methods for accurate assessment of safety. The evaluation of different animal models and screening of target organs through a combination of techniques is a cost-effective and timely strategy.

Design and validation of a consistent and reproducible manufacture process for the production of clinical-grade bone marrow-derived multipotent mesenchymal stromal cells.

BACKGROUND: Multipotent mesenchymal stromal cells (MSC) have achieved a notable prominence in the field of regenerative medicine, despite the lack of common standards in the production processes and suitable quality controls compatible with Good Manufacturing Practice (GMP). Herein we describe the design of a bioprocess for bone marrow (BM)-derived MSC isolation and expansion, its validation and production of 48 consecutive batches for clinical use. METHODS: BM samples were collected from the iliac crest of patients for autologous therapy. Manufacturing procedures included: (i) isolation of nucleated cells (NC) by automated density-gradient centrifugation and plating; (ii) trypsinization and expansion of secondary cultures; and (iii) harvest and formulation of a suspension containing 40 ± 10 × 10(6) viable cells. Quality controls were defined as: (i) cell count and viability assessment; (ii) immunophenotype; and (iii) sterility tests, Mycoplasma detection, endotoxin test and Gram staining. RESULTS: A 3-week manufacturing bioprocess was first designed and then validated in 3 consecutive mock productions, prior to producing 48 batches of BM-MSC for clinical use. Validation included the assessment of MSC identity and genetic stability. Regarding production, 139.0 ± 17.8 mL of BM containing 2.53 ± 0.92 × 10(9) viable NC were used as starting material, yielding 38.8 ± 5.3 × 10(6) viable cells in the final product. Surface antigen expression was consistent with the expected phenotype for MSC, displaying high levels of CD73, CD90 and CD105, lack of expression of CD31 and CD45 and low levels of HLA-DR. Tests for sterility, Mycoplasma, Gram staining and endotoxin had negative results in all cases. DISCUSSION: Herein we demonstrated the establishment of a feasible, consistent and reproducible bioprocess for the production of safe BM-derived MSC for clinical use.

Evaluation of a cell-banking strategy for the production of clinical grade mesenchymal stromal cells from Wharton's jelly.

BACKGROUND AIMS: Umbilical cord (UC) has been proposed as a source of mesenchymal stromal cells (MSCs) for use in experimental cell-based therapies provided that its collection does not raise any risk to the donor, and, similar to bone marrow and lipoaspirates, UC-MSCs are multipotent cells with immuno-modulative properties. However, some of the challenges that make a broader use of UC-MSCs difficult include the limited availability of fresh starting tissue, time-consuming processing for successful derivation of cell lines, and the lack of information on identity, potency and genetic stability in extensively expanded UC-MSCs, which are necessary for banking relevant cell numbers for preclinical and clinical studies. METHODS: Factors affecting the success of the derivation process (namely, time elapsed from birth to processing and weight of fragments), and methods for establishing a two-tiered system of Master Cell Bank and Working Cell Bank of UC-MSCs were analyzed. RESULTS: Efficient derivation of UC-MSCs was achieved by using UC fragments larger than 7 g that were processed within 80 h from birth. Cells maintained their immunophenotype (being highly positive for CD105, CD90 and CD73 markers), multi-potentiality and immuno-modulative properties beyond 40 cumulative population doublings. No genetic abnormalities were found, as determined by G-banding karyotype, human telomerase reverse transcriptase activity was undetectable and no toxicity was observed in vivo after intravenous administration of UC-MSCs in athymic rats. DISCUSSION: This works demonstrates the feasibility of the derivation and large-scale expansion of UC-MSCs from small and relatively old fragments of UC typically discarded from public cord blood banking programs.