Anti-Inflammatory and Analgesic Evaluation of a Phytochemical Intercalated into Layered Double Hydroxide.

Coumaric acid (CouH), an antioxidant molecule assimilated by food consumption, was intercalated into layered double hydroxide (LDH) nanocarrier, having zinc and aluminium ions in the layers (LDH-Cou), to evaluate its pharmacological activity through in vitro and in vivo assays in mice. Therefore, the following tests were performed: coumarate delivery in saline solution, fibroblasts' cell viability using neutral red, peritonitis induced by carrageenan, formalin test, acetic-acid-induced writhing, and tail-flick assay, for the non-intercalated CouH and the intercalated LDH-Cou system. Furthermore, different pharmacological pathways were also investigated to evaluate their possible anti-inflammatory and antinociceptive mechanisms of action, in comparison to traditionally used agents (morphine, naloxone, caffeine, and indomethacin). The LDH-Cou drug delivery system showed more pronounced anti-inflammatory effect than CouH but not more than that evoked by the classic non-steroidal anti-inflammatory drug (NSAID) indomethacin. For the analgesic effect, according to the tail-flick test, the treatment with LDH-Cou expressively increased the analgesia duration (p < 0.001) by approximately 1.7−1.8 times compared to CouH or indomethacin. Thus, the results pointed out that the LDH-Cou system induced in vivo analgesic and anti-inflammatory activities and possibly uses similar mechanisms to that observed for classic NSAIDs, such as indomethacin.

Folic acid and sodium folate salts: Thermal behavior and spectroscopic (IR, Raman, and solid-state 13C NMR) characterization.

Folic acid (FA; vitamin B9) and its associated sodium salts, strongly relevant for many scientific and technological applications - from nutrition to pharmacology and nanomedicine, suffer from a lack of characterization combining experimental and theoretical. In this work, a spectroscopic investigation of FA and its synthesized sodium salts in the form of dianion (Na2HFol) or trianion (Na3Fol) was scrutinized in their solid state. The spectroscopic (infrared, Raman, and solid state 13C-nuclear magnetic resonance) data interpretation was supported by theoretical calculations using the Density Functional Theory (DFT). Additionally, the compounds were characterized by UV-VIS diffuse-reflectance spectroscopy, combined thermal analysis (TG/DTG-DSC) coupled to mass spectrometry, and X-ray diffractometry. The main signatures of each species were identified, as well as the influence of the protonation level on their physicochemical properties. These distinct properties for the three compounds are mainly based on signals assigned to glutamic acid (glutamate) and pterin (neutral or anionic) moieties. This work should help developing new products based on FA or its anionic forms, such as theragnostic/drug delivery systems, supramolecular structures, nanocarbons, or metal complexes.

Plant growth regulation by seed coating with films of alginate and auxin-intercalated layered double hydroxides.

Auxins are a class of organic substances known as plant-growth regulators, which act on plant physiology, promoting its full development. However, due to the great instability of these substances among the diversity of crops and cultivation environments, it is necessary to seek more efficient modes of application, which lead to a homogeneous distribution and promote a sustained release according to the plants demand. Seed coating, using films containing a biodegradable polymer and auxins intercalated into layered compounds, emerges as a very promising approach to a new form of growth regulator application. Thus, the presented work had three aims: (i) the synthesis and characterization of an organic-inorganic hybrid material containing a layered double hydroxide (LDH) of zinc and aluminum and the synthetic auxin 1-naphthalenoacetic acid (ZnAl-NAA-LDH), (ii) the coating of bean seeds (Phaseolus vulgaris L.) with composite films produced from mixtures of alginate polymer and ZnAl-NAA-LDH, and (iii) the evaluation of the plant response by bioassays. The hybrid ZnAl-NAA-LDH was characterized by a set of analytical techniques, including powder X-ray diffraction, thermogravimetric analysis coupled to differential scanning calorimetry and mass spectrometry, specific surface area measurement, and scanning electron microscopy. Bioassays were performed with the seeds coated with the composite film to assess the germination rate and germination speed index of the seeds, as well as biometric analyses including measurements of root area, root fresh matter, and shoot length of the plants. The bioassay performed in soil pots showed that the alginate film containing ZnAl-NAA-LDH yields an enhancement regarding root area, fresh root matter and shoot length of plants. Thus, films produced from a mixture of alginate and the hybrid material containing the growth regulator intercalated into LDH can be a viable alternative to enhance plant development, which can be included in seed management.

Theoretical UV-Vis spectra of tetracationic porphyrin: effects of environment on electronic spectral properties.

Electronic and spectroscopic properties of tetracationic 5,10,15,20-tetrakis(1-methyl-4-pyridyl)-21H,23H-porphyrin (TMPyP) were investigated in the framework of the density functional theory (DFT). Modeling of implicit solvent, charge effects, and medium acidity were performed and compared with experimental results. Various hybrid exchange correlation functionals in the Kohn-Sham Scheme of the DFT were employed and various porphyrin models were constructed, simulating different environmental conditions. Since porphyrins present several technological applications with a plethora of interacting systems and the optical spectra profiles are often used to characterize these macrocyclic compounds, the study performed here aims to stablish a correct description of the UV-Vis spectrum. These results allowed to reproduce, both qualitatively as well as quantitatively, the Soret band of the TMPyP.

Adsorption of gallic acid on nanoclay modified with poly(diallyldimethylammonium chloride).

In this work, particles of nanoclay modified with poly(diallyldimethylammonium), PDDA, namely PDDA/PGV, were obtained and characterized by infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), surface area measurement (BET surface area), measurement of zero charge point (pHPCZ), and scanning electron microscopy with energy-dispersive spectroscopy (SEM/EDS). The PDDA/PGV particles were applied as adsorbent for the removal of gallic acid (GA) from aqueous solution. The effect of various parameters, such as solution pH, contact time, adsorbent mass, and temperature, was studied. The maximum adsorption capacity of PDDA/PGV (238.45 mg g-1) was observed at pH 4 and 15 °C. The study of adsorption kinetics and isotherms revealed that the adsorption process was better fitted by pseudo-first order and Freundlich model, respectively. The obtained thermodynamic parameters indicate that the adsorption of GA is spontaneous and enthalpy-driven.

Ternary nanocomposites of reduced graphene oxide, polyaniline and hexaniobate: hierarchical architecture and high polaron formation.

Nanostructured systems, such as nanocomposites, are potential materials for usage in different fields since synergistic effects of their components at the nanoscale domain may improve physical/chemical properties when compared to individual phases. We report here the preparation and characterisation of a new nanocomposite composed of polyaniline (PANI), reduced graphene oxide (rGO) and hexaniobate (hexNb) nanoscrolls. Atomic force microscopy images show an interesting architecture of rGO flakes coated with PANI and decorated by hexNb. Such features are attributed to the high stability of the rGO flakes prepared at room temperature. Detailed characterisation by X-ray photoelectron and Raman spectroscopies indicates an intermediate reduction degree for the rGO component and high doping degree of the PANI chains compared to the neat polymer. The latter feature can be attributed to cooperative effects of PANI chains with rGO flakes and hexNb nanoscrolls, which promote conformational changes of the polymer backbone (secondary doping). Spectroscopic and electrochemistry data indicate a synergetic effect on the ternary nanocomposite, which is attributed to interactions between the components resulting from the morphological aspects. Therefore, the new nanocomposite presents promising properties for development of new materials in the film form on substrates for sensing or corrosion protection for example.

Delivery system for mefenamic acid based on the nanocarrier layered double hydroxide: Physicochemical characterization and evaluation of anti-inflammatory and antinociceptive potential.

PURPOSE: The anionic form of the drug mefenamic acid intercalated into the nanocarrier layered double hydroxide (LDH-Mef) was evaluated by anti-inflammatory and antinociceptive assays. METHODS: The LDH-Mef material was characterized by a set of physicochemical techniques, which was supported by Density Functional Theory calculations. The pharmacological effects of LDH-Mef (40 wt% of drug) were evaluated by hemolytic, anti-inflammatory activity and antinociceptive assays. RESULTS: In vivo assays were conducted for the first time in order to assess the LDH-Mef potential. The hemolytic effects decreased for the intercalated Mef as demonstrated by the higher tolerated hemolytic concentration (1.83 mM) compared to mefenamic acid (MefH), 0.48 mM. Pretreatment of animals with MefH or LDH-Mef reduced carrageenan-, dextran sulfate- and PGE2-induced paw edema. MefH or LDH-Mef also decrease total leucocytes and neutrophil counts of the peritoneal cavity after inflammation induction with carrageenan. In the nociception model, oral pretreatment with LDH-Mef reduced mechanical hypernociception carrageenan-induced after 3-4h and also the number of writhings induced by acetic acid. CONCLUSIONS: This work shows the increase of the anti-inflammatory and antinociceptive potential of the drug confined into the LDH, as well as, its hemolytic effect.

Mefenamic acid anti-inflammatory drug: probing its polymorphs by vibrational (IR and Raman) and solid-state NMR spectroscopies.

This work deals with the spectroscopic (supported by quantum chemistry calculations), structural, and morphological characterization of mefenamic acid (2-[(2,3-(dimethylphenyl)amino] benzoic acid) polymorphs, known as forms I and II. Polymorph I was obtained by recrystallization in ethanol, while form II was reached by heating form I up to 175 °C, to promote the solid phase transition. Experimental and theoretical vibrational band assignments were performed considering the presence of centrosymmetric dimers. Besides band shifts in the 3345-3310 cm(-1) range, important vibrational modes to distinguish the polymorphs are related to out-of-phase and in-phase N-H bending at 1582 (Raman)/1577 (IR) cm(-1) and 1575 (Raman)/1568 (IR) cm(-1) for forms I and II, respectively. In IR spectra, bands assigned to N-H bending out of plane are observed at 626 and 575 cm(-1) for polymorphs I and II, respectively. Solid-state (13)C NMR spectra pointed out distinct chemical shifts for the dimethylphenyl group: 135.8 to 127.6 ppm (carbon bonded to N) and 139.4 to 143.3 ppm (carbon bonded to methyl group) for forms I and II, respectively.

Probing the local environment of hybrid materials designed from ionic liquids and synthetic clay by Raman spectroscopy.

Hybrid organic-inorganic material containing Laponite clay and ionic liquids forming cations have been prepared and characterized by FT-Raman spectroscopy, X-ray diffraction, and thermal analysis. The effect of varying the length of the alkyl side chain and conformations of cations has been investigated by using different ionic liquids based on piperidinium and imidazolium cations. The structure of the N,N-butyl-methyl-piperidinium cation and the assignment of its vibrational spectrum have been further elucidated by quantum chemistry calculations. The X-ray data indicate that the organic cations are intercalated parallel to the layers of the clay. Comparison of Raman spectra of pure ionic liquids with different anions and the resulting solid hybrid materials in which the organic cations have been intercalated into the clay characterizes the local environment experienced by the cations in the hybrid materials. The Raman spectra of hybrid materials suggest that the local environment of all confined cations, in spite of this diversity in properties, resembles the liquid state of ionic liquids with a relatively disordered structure.

Industrial Scale Isolation, Structural and Spectroscopic Characterization of Epiisopiloturine from Pilocarpus microphyllus Stapf Leaves: A Promising Alkaloid against Schistosomiasis.

This paper presents an industrial scale process for extraction, purification, and isolation of epiisopiloturine (EPI) (2(3H)-Furanone,dihydro-3-(hydroxyphenylmethyl)-4-[(1-methyl-1H-imidazol-4-yl)methyl]-, [3S-[3a(R*),4b]]), which is an alkaloid from jaborandi leaves (Pilocarpus microphyllus Stapf). Additionally for the first time a set of structural and spectroscopic techniques were used to characterize this alkaloid. EPI has shown schistomicidal activity against adults and young forms, as well as the reduction of the egg laying adult worms and low toxicity to mammalian cells (in vitro). At first, the extraction of EPI was done with toluene and methylene chloride to obtain a solution that was alkalinized with ammonium carbonate. The remaining solution was treated in sequence by acidification, filtration and alkalinization. These industrial procedures are necessary in order to remove impurities and subsequent application of the high performance liquid chromatography (HPLC). The HPLC was employed also to remove other alkaloids, to obtain EPI purity higher than 98%. The viability of the method was confirmed through HPLC and electrospray mass spectrometry, that yielded a pseudo molecular ion of m/z equal to 287.1 Da. EPI structure was characterized by single crystal X-ray diffraction (XRD), (1)H and (13)C nuclear magnetic resonance (NMR) in deuterated methanol/chloroform solution, vibrational spectroscopy and mass coupled thermal analyses. EPI molecule presents a parallel alignment of the benzene and the methyl imidazol ring separated by an interplanar spacing of 3.758 Å indicating a π-π bond interaction. The imidazole alkaloid melts at 225°C and decomposes above 230°C under air. EPI structure was used in theoretical Density Functional Theory calculations, considering the single crystal XRD data in order to simulate the NMR, infrared and Raman spectra of the molecule, and performs the signals attribution.

Spectroscopic study on the structural differences of thermally induced cross-linking segments in emeraldine salt and base forms of polyaniline.

This paper reports the spectroscopic study on the structural differences of thermally induced cross-linking segments in polyaniline in its emeraldine salt (PANI-ES) and base (PANI-EB) forms. Casting films of PANI-ES (ES-film) and PANI-EB (EB-film) were prepared and heated at 150 °C under atmospheric air for 30 min. Raman spectra excited at 632.8 nm of heated ES-film presented the characteristic bands of phenazine-like structures at 1638, 1392, and 575 cm(-1), whereas EB-film showed lower relative intensities for these bands. The lower content of phenazine-like segments in heated EB-film is related to residual polaronic segments from preparation procedures, as revealed by Raman. This statement was confirmed by a sequence of thermal and doping experiments in both films. Quantum-chemical calculations by density functional theory (DFT) and time-dependent density functional theory (TD-DFT) showed that the phenazine-like structure presents the intense Raman band at 1350 cm(-1) due to heterocycle breathing mode, and the non-phenazine-like structure (substituted hydrophenazine-type) presents higher energy for HOMO-LUMO transition, indicating the lack of conjugation in the heterocycle compared with the phenazine-like structure. According to experimental and theoretical data reported here, it is proposed that only thermally treated PANI-ES presents phenazine-like rings, whereas PANI-EB presents heterocyclic non-aromatic structures.

Iron oxyhydroxide nanostructured in montmorillonite clays: Preparation and characterization.

Akaganéite is a very rare iron oxyhydroxide in nature. It can be obtained by many synthetic routes, but thermohydrolysis is the most common method reported in the literature. In this work, akaganéite-like materials were prepared through the thermohydrolysis of FeCl(3).6H(2)O in water and suspensions containing clay minerals. X-ray diffractometry (XRD), Fourier transform infrared (FTIR) spectroscopy, and scanning electron microscopy (SEM) data show that the clays determine the crystal phase and size of the iron oxyhydroxide crystals. According to XRD and FTIR data, beta-FeO(OH) (akaganéite) is the main metal oxyhydroxide phase. Considering the small basal spacing (d(001)) displacement observed when comparing the XRD patterns of pristine clays with the composites containing beta-FeO(OH), the iron oxyhydroxide should be mostly located on the basal and edge surfaces of the clay minerals. UV-Vis electronic absorption spectra indicate that the preferred phase of the iron oxyhydroxide is determined by the nature of the clay minerals.

Polyaniline/layered zirconium phosphate nanocomposites: secondary-like doped polyaniline obtained by the layer-by-layer technique.

In the present work, nanocomposites of polyaniline (PANI) and layered alpha-Zr(HPO4)2 x H2O (alpha-ZrP) were prepared using two different approaches: (i) the in situ aniline polymerization in the presence of the layered inorganic material and (ii) the layer-by-layer (LBL) assembly using an aqueous solution of the polycation emeraldine salt (ES-PANI) and a dispersion of exfoliated negative slabs of alpha-ZrP. These materials were characterized spectroscopically using mainly resonance Raman scattering at four exciting radiations and electronic absorption in the UV-VIS-NIR region. Structural and textural characterizations were carried out using powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). The polymer obtained by the in situ aniline polymerization is located primarily in the external surface of the inorganic material although aniline monomers were intercalated between alpha-ZrP interlayer regions before oxidative polymerization. Through resonance Raman spectroscopy, it was observed that the formed polymer has semiquinone units (ES-PANI) and also azo bonds (-N=N-), showing that this method results in a polymer with a different structure from the usual "head-to-tail" ES-PANI. The LBL assembly of pre-formed ES-PANI and exfoliated alpha-ZrP particles produces homogeneous films with reproducible deposition from layer to layer, up to 20 bilayers. Resonance Raman (lambda0 = 632.8 nm) spectrum of PANI/ZrP LBL film shows an enhancement in the intensity of the polaronic band at 1333 cm(-1) (upsilonC-N*+) and the decrease of the band intensity at 1485 cm(-1) compared to bulk ES-PANI. Its UV-VIS-NIR spectrum presents an absorption tail in the NIR region assigned to delocalized free charge carrier. These spectroscopic features are characteristic of highly conductive secondary doped PANI suggesting that polymeric chains in PANI/ZrP LBL film have a more extended conformation than in bulk ES-PANI.

Optical changes and writing on hydrotalcite supported gold nanoparticles.

Gold nanoparticles (AuNP) incorporated into hydrotalcite (HT), provide an interesting type of pigment in which temperature can modulate the plasmon resonance and the aggregation phenomenon. As inferred from microscopy techniques, the preferential binding sites are located at the border of the HT external basal surface, leading to aggregates of gold nanoparticles displaying characteristic plasmon resonance and interference bands around 520 and 700 nm, respectively. The thermally induced color changes in the HT-supported gold material arise from the competition between of nanoparticles aggregation and fusion processes, as characterized by TEM and STM. A laser beam can also induce such changes, allowing the writing of optical information on this type of material.

Evaluation of hexaniobate nanoscrolls as support for immobilization of a copper complex catalyst.

In this work, we report the intercalation properties of the hexaniobate nanoscrolls toward insertion of 2-[2-(2-pyridyl)ethylimino-1-ethyl]pyridine-imidazole copper(II), [Cu(apip)imH]2+, a cationic complex able to promote the catalytic oxidation of organic substrates. Hexaniobate was first transformed into its acidic phase, H2K2Nb6O17, and then exfoliated with n-butylamine in water. The copper complex was immobilized into the nanoscrolls obtained by the acidification of delaminated particle dispersion at pH 3. TEM micrographs of particles after immobilization of the cationic complex show scrolls with external diameters of ca. 25-30 nm and wall thicknesses of about 4.5-7.0 nm. The basal spacing (d(040)) of the copper complex intercalated in hexaniobate is about 11.6 A. The estimated composition, [Cu(apip)imH](0.5)HK2Nb6O17.6H2O, indicates that 50% of the negative charge of interlayer I was neutralized by the copper complex. EPR and IR spectra showed that the ligands and the distorted tetragonal structure of the complex were maintained after immobilization into niobate. The reactivity of this new material toward catechol oxidation using hydrogen peroxide as the oxidizing agent was investigated and compared to the activity of the same complex in solution. The heterogeneous catalyst is initially less effective toward the catechol oxidation but with time, the reaction shows a higher catechol conversion (ca. 82%) than the same copper complex in homogeneous media (ca. 75%). A better reactivity of the heterogeneous catalyst may be related to the stabilization of the immobilized catalyst, preventing its degradation during the reaction course. EPR results show that the kinetics of formation of the DMPO/*OH adduct in homogeneous and heterogeneous conditions corresponds to that observed in the catechol oxidation, suggesting that hydroxyl radicals are involved in the reaction mechanism.

Immobilization of ibuprofen and copper-ibuprofen drugs on layered double hydroxides.

The immobilization of the NSAID ibuprofen (Hibp) and the Cu(II)-ibp compound on magnesium-aluminum layered double hydroxides (Mg3Al-LDH) is described. Ibuprofen was intercalated on LDHs by three routes (ion exchange, co-precipitation, and reconstruction). The organic drug and the Cu(II)-ibp were also immobilized by adsorption on LDH external surfaces. Materials were characterized by elemental analysis, UV/VIS, FTIR, and Raman spectroscopies, powder X-ray diffractometry (XRD), thermogravimetry, and electronic paramagnetic resonance (EPR). Mg3Al-(ibp)(cop) (30% w/w of drug/material) and Mg3Al-(ibp)(ie) (33%) materials exhibit bilayer arrangements of ibp anions intercalated between the host layers. Mg3Al-(ibp)(rec) and Mg3Al-(ibp)(ads) contain 13% and 6.2% of ibuprofenate, respectively. Mg3Al-(Cu-ibp)(ads) exhibits two Cu centers in different environments interacting with host layers. Pharmacological potential of materials are compared considering the amounts of immobilized drugs and their buffering properties. Mg3Al-(ibp)(ie) and Mg3Al-(ibp)(cop) exhibit poor buffering property, but contain high ibp amounts. Mg3Al-(ibp)(ads) despite having buffering property, contains low amount of ibuprofen. Mg3Al-(ibp)(rec) combines significant amount of immobilized ibp with good buffering property. Mg3Al-(Cu-ibp)(ads), due to the buffering property, may be an interesting new formulation aiming to decrease gastric irritation.

Spectroscopic characterization of polyaniline formed by using copper(II) in homogeneous and MCM-41 molecular sieve media.

This work emphasizes the important role of the synthetic parameters in the structure of the polymeric material obtained in the aniline polymerization. The polymers formed by the oxidative polymerization of aniline by copper(II) ions in acidic aqueous solution, acetonitrile/water medium, and also copper(II) acetate complex encapsulated into MCM-41 molecular sieve were characterized by resonance Raman spectroscopy using three exciting laser lines and other techniques such as UV-vis, FTIR, and XANES (Nitrogen K edge). Additionally the products were investigated by thermogravimetric analysis and powder X-ray diffraction. When Cu(II) ions in acidic aqueous medium are used, emeraldine salt (ES-PANI) is formed through the usual head-to-tail polymerization mechanism, while in acetonitrile/water medium a polymer is observed having mainly phenazine-like rings, quinonediimine, and/or phenylenediamine segments in the chains, suggesting that a distinct mechanism is operating. The average molecular weights of the free polymers synthesized in water and in acetronile/water were, respectively, ca. 37 300 and 16 900 Da. The encapsulated polymer synthesized in Cu(II)-MCM-41 is a polymeric mixture of (i) ES-PANI and (ii) the polymer obtained when this metal cation was used as oxidant in acetonitrile/water medium. All the characterization data were compared to those ones obtained for standard free polyaniline and also for the encapsulated polymer into mesoporous MCM-41 formed by using persulfate in acidic aqueous medium as oxidant.

Intercalation compounds involving inorganic

Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.