RESUMO
The role of ß-CoOOH crystallographic orientations in catalytic activity for the oxygen evolution reaction (OER) remains elusive. We combine correlative electron backscatter diffraction/scanning electrochemical cell microscopy with X-ray photoelectron spectroscopy, transmission electron microscopy, and atom probe tomography to establish the structure-activity relationships of various faceted ß-CoOOH formed on a Co microelectrode under OER conditions. We reveal that ≈6â nm ß-CoOOH(01 1 â¾ ${\bar{1}}$ 0), grown on [ 1 â¾ 2 1 â¾ ${\bar{1}2\bar{1}}$ 0]-oriented Co, exhibits higher OER activity than ≈3â nm ß-CoOOH(10 1 â¾ ${\bar{1}}$ 3) or ≈6â nm ß-CoOOH(0006) formed on [02 2 â¾ 1 ] ${\bar{2}1]}$ - and [0001]-oriented Co, respectively. This arises from higher amounts of incorporated hydroxyl ions and more easily reducible CoIII -O sites present in ß-CoOOH(01 1 â¾ ${\bar{1}}$ 0) than those in the latter two oxyhydroxide facets. Our correlative multimodal approach shows great promise in linking local activity with atomic-scale details of structure, thickness and composition of active species, which opens opportunities to design pre-catalysts with preferred defects that promote the formation of the most active OER species.
RESUMO
Water is an integral component in electrochemistry, in the generation of the electric double layer, and in the propagation of the interfacial electric fields into the solution; however, probing the molecular-level structure of interfacial water near functioning electrode surfaces remains challenging. Due to the surface-specificity, sum-frequency-generation (SFG) spectroscopy offers an opportunity to investigate the structure of water near working electrochemical interfaces but probing the hydrogen-bonded structure of water at this buried electrode-electrolyte interface was thought to be impossible. Propagating the laser beams through the solvent leads to a large attenuation of the infrared light due to the absorption of water, and interrogating the interface by sending the laser beams through the electrode normally obscures the SFG spectra due to the large nonlinear response of conduction band electrons. Here, we show that the latter limitation is removed when the gold layer is thin. To demonstrate this, we prepared Au gradient films on CaF2 with a thickness between 0 and 8 nm. SFG spectra of the Au gradient films in contact with H2O and D2O demonstrate that resonant water SFG spectra can be obtained using Au films with a thickness of â¼2 nm or less. The measured spectra are distinctively different from the frequency-dependent Fresnel factors of the interface, suggesting that the features we observe in the OH stretching region indeed do not arise from the nonresonant response of the Au films. With the newfound ability to probe interfacial solvent structure at electrode/aqueous interfaces, we hope to provide insights into more efficient electrolyte composition and electrode design.
RESUMO
Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F430 and P450nor co-factors, with their reduced NiI - and FeIII -containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario.
Assuntos
Níquel , Óxido Nítrico , Cobre , Compostos Férricos , Metais , OxirreduçãoRESUMO
Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F430 and P450nor co-factors, with their reduced NiI- and FeIII-containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario.
RESUMO
Single-entity electrochemistry allows for assessing electrocatalytic activities of individual material entities such as nanoparticles (NPs). Thus, it becomes possible to consider intrinsic electrochemical properties of nanocatalysts when researching how activity relates to physical and structural material properties. Conversely, conventional electrochemical techniques provide a normalized sum current referring to a huge ensemble of NPs constituting, along with additives (e.g., binders), a complete catalyst-coated electrode. Accordingly, recording electrocatalytic responses of single NPs avoids interferences of ensemble effects and reduces the complexity of electrocatalytic processes, thus enabling detailed description and modelling. Herein, we present insights into the oxygen evolution catalysis at individual cubic Co3O4 NPs impacting microelectrodes of different support materials. Simulating diffusion at supported nanocubes, measured step current signals can be analyzed, providing edge lengths, corresponding size distributions, and interference-free turnover frequencies. The provided nano-impact investigation of (electro-)catalyst-support effects contradicts assumptions on a low number of highly active sites.
Assuntos
Cobalto/química , Nanopartículas/química , Óxidos/química , Oxigênio/química , Catálise , Difusão , Técnicas Eletroquímicas/instrumentação , Microeletrodos , Microscopia Eletrônica de TransmissãoRESUMO
Self-metalation is a promising route to include a single metal atom in a tetrapyrrolic macrocycle in organic frameworks supported by metal surfaces. The molecule-surface interaction may provide the charge transfer and the geometric distortion of the molecular plane necessary for metal inclusion. However, at a metal surface the presence of an activation barrier can represent an obstacle that cannot be compensated by a higher substrate temperature without affecting the layer integrity. The formation of the intermediate state can be facilitated in some cases by oxygen pre-adsorption at the supporting metal surface, like in the case of 2H-TPP/Pd(100). In such cases, the activation barrier can be overcome by mild annealing, yielding the formation of desorbing products and of the metalated tetrapyrrole. We show here that the self-metalation of 2H-TPP at the Pd(100) surface can be promoted already at room temperature by the presence of an oxygen gas phase at close-to-ambient conditions via an Eley-Rideal mechanism.
RESUMO
Pt/ZrO2 model catalysts were prepared by atomic layer deposition (ALD) and examined at mbar pressure by operando sum frequency generation (SFG) spectroscopy and near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) combined with differentially pumped mass spectrometry (MS). ALD enables creating model systems ranging from Pt nanoparticles to bulk-like thin films. Polarization-dependent SFG of CO adsorption reveals both the adsorption configuration and the Pt particle morphology. By combining experimental data with ab initio density functional theory (DFT) calculations, we show that the CO reaction onset is determined by a delicate balance between CO disproportionation (Boudouard reaction) and oxidation. CO disproportionation occurs on low-coordinated Pt sites, but only at high CO coverages and when the remaining C atom is stabilized by a favorable coordination. Thus, under the current conditions, initial CO oxidation is found to be strongly influenced by the removal of carbon deposits formed through disproportionation mechanisms rather than being determined by the CO and oxygen inherent activity. Accordingly, at variance with the general expectation, rough Pt nanoparticles are seemingly less active than smoother Pt films. The applied approach enables bridging both the "materials and pressure gaps".
RESUMO
We show that, for the formation of a metallorganic monolayer, it is possible to artificially divert from substrate- to laterally-driven self-assembly mechanisms by properly tailoring the corrugation of the potential energy surface of the growth template. By exploiting the capability of an ultrathin alumina film to host metallic nanoparticle seeds, we tune the symmetry of a iron phthalocyanine (FePc) two-dimensional crystal, thus showing that it is possible to switch from trans to lateral dominating interactions in the controlled growth of an organic/inorganic heterostack. Finally, by selecting the size of the metallic clusters, we can also control the FePc-metal interaction strength.
RESUMO
The adsorption of CO on Pt nanoclusters grown in a regular array on a template provided by the graphene/Ir(111) Moiré was investigated by means of infrared-visible sum frequency generation vibronic spectroscopy, scanning tunneling microscopy, X-ray photoelectron spectroscopy from ultrahigh vacuum to near-ambient pressure, and ab initio simulations. Both terminally and bridge bonded CO species populate nonequivalent sites of the clusters, spanning from first to second-layer terraces to borders and edges, depending on the particle size and morphology and on the adsorption conditions. By combining experimental information and the results of the simulations, we observe a significant restructuring of the clusters. Additionally, above room temperature and at 0.1 mbar, Pt clusters catalyze the spillover of CO to the underlying graphene/Ir(111) interface.
RESUMO
Stable hydrocarbon surface species in the carbon dioxide hydrogenation reaction on Ir(111) were identified by means of infrared-visible sum-frequency generation vibrational spectroscopy and X-ray photoelectron spectroscopy under near-ambient pressure conditions (0.1 mbar). By introducing gas phase binary and ternary mixtures of CO2, CO, and H2 into the reaction chamber, stable ethylidyne and ethynyl species were found at the metal surface above 425 K, in remarkable analogy with that observed during the ethylene decomposition process yielding graphene. In addition, upon increasing temperature (up to 600 K depending on the reaction conditions), vibrational and electronic spectroscopic fingerprints appeared that could be attributed to the nucleation of aromatic hydrocarbons at the edge of metastable graphenic clusters interacting with the metal surface.