Synthesis of ultra-small cysteine-capped gold nanoparticles by pH switching of the Au(I)-cysteine polymer.

We report a synthetic approach for the production of ultra-small (0.6 nm) gold nanoparticles soluble in water with a precise control of the nanoparticle size. Our synthetic approach utilizes a pH-depending Au-cysteine polymer as a quencher for the AuNPs grown. The method extends the synthetic capabilities of nanoparticles with sizes down to 1 nm. In addition to the strict pH control, the existence of free -SH groups present in the mixture of reaction has been observed as a key requirement for the synthesis of small nanoparticles in mild conditions. UV-Vis, SAXS, XANES, EXAFS and HR-TEM, has been used to determinate the particle size, characterization of the gold precursor and gold-cysteine interaction.

Shape changes of Pt nanoparticles induced by deposition on mesoporous silica.

Polyvinylpyrollidone (PVP)-capped platinum nanoparticles (NPs) are found to change shape from spherical to flat when deposited on mesoporous silica substrates (SBA-15). Transmission electron microscopy (TEM), small-angle X-ray scattering (SAXS), and extended X-ray absorption fine structure (EXAFS) analyses are used in these studies. The SAXS results indicate that, after deposition, the 2 nm NPs have an average gyration radius 22% larger than in solution, while the EXAFS measurements indicate a decrease in first neighbor co-ordination number from 9.3 to 7.4. The deformation of these small capped NPs is attributed to interactions with the surface of the SBA-15 support, as evidenced by X-ray absorption near-edge structure (XANES).

Crystallite size-dependent phases in nanocrystalline ZrO(2)-Sc(2)O(3).

ZrO(2)-10, 12 and 14 mol% Sc(2)O(3) nanopowders were prepared by using a nitrate-lysine gel-combustion synthesis. These materials were studied by synchrotron X-ray powder diffraction (SXPD) and Raman spectroscopy after calcination at different temperatures from 650 to 1200 degrees C, which led to samples with different average crystallite sizes, up to about 100 nm. The results from SXPD and Raman analyses indicate that, depending on Sc(2)O(3) content, the metastable t''-form of the tetragonal phase or the cubic phase are fully retained at room temperature in nanocrystalline powders, provided an average crystallite sizes lower than approximately 30 nm. By contrast, powders with larger average crystallite sizes exhibit the stable rhombohedral, beta and gamma, phases and do not retain or very partially retain the metastable t'' and cubic ones.

Interleukin-22 forms dimers that are recognized by two interleukin-22R1 receptor chains.

Interleukin-22 (IL-22) is a class 2 cytokine whose primary structure is similar to that of interleukin 10 (IL-10) and interferon-gamma (IFN-gamma). IL-22 induction during acute phase immune response indicates its involvement in mechanisms of inflammation. Structurally different from IL-10 and a number of other members of IL-10 family, which form intertwined inseparable V-shaped dimers of two identical polypeptide chains, a single polypeptide chain of IL-22 folds on itself in a relatively globular structure. Here we present evidence, based on native gel electrophoresis, glutaraldehyde cross-linking, dynamic light scattering, and small angle x-ray scattering experiments, that human IL-22 forms dimers and tetramers in solution under protein concentrations assessable by these experiments. Unexpectedly, low-resolution molecular shape of IL-22 dimers is strikingly similar to that of IL-10 and other intertwined cytokine dimeric forms. Furthermore, we determine an ab initio molecular shape of the IL-22/IL-22R1 complex which reveals the V-shaped IL-22 dimer interacting with two cognate IL-22R1 molecules. Based on this collective evidence, we argue that dimerization might be a common mechanism of all class 2 cytokines for the molecular recognition with their respective membrane receptor. We also speculate that the IL-22 tetramer formation could represent a way to store the cytokine in nonactive form at high concentrations that could be readily converted into functionally active monomers and dimers upon interaction with the cognate cellular receptors.

Low-resolution structures of thyroid hormone receptor dimers and tetramers in solution.

High-resolution X-ray structures of thyroid hormone (TH) receptor (TR) DNA and ligand binding domains (DBD and LBD) have yielded significant insights into TR action. Nevertheless, the TR DBD and LBD act in concert to mediate TH effects upon gene expression, and TRs form multiple oligomers; however, structures of full-length TRs or DBD-LBD constructs that would clarify these influences are not available. Here, we report low-resolution X-ray structures of the TRbeta DBD-LBD construct in solution which define the shape of dimers and tetramers and likely positions of the DBDs and LBDs. The holo TRbeta DBD-LBD construct forms a homodimer with LBD-DBD pairs in close contact and DBDs protruding from the base in the same direction. The DBDs are connected to the LBDs by crossed extended D domains. The apo hTRbeta DBD-LBD construct forms tetramers that resemble bulged cylinders with pairs of LBD dimers in a head-to-head arrangement with DBD pairs packed tightly against the LBD core. Overall, there are similarities with our previous low-resolution structures of retinoid X receptors, but TRs exhibit two unique features. First, TR DBDs are closely juxtaposed in the dimer and tetramer forms. Second, TR DBDs are closely packed against LBDs in the tetramer, but not the dimer. These findings suggest that TRs may be able to engage in hitherto unknown interdomain interactions and that the D domain must rearrange in different oligomeric forms. Finally, the data corroborate our suggestion that apo TRs form tetramers in solution which dissociate into dimers upon hormone binding.

Structural rearrangements in the thyroid hormone receptor hinge domain and their putative role in the receptor function.

The thyroid hormone receptor (TR) D-domain links the ligand-binding domain (LBD, EF-domain) to the DNA-binding domain (DBD, C-domain), but its structure, and even its existence as a functional unit, are controversial. The D domain is poorly conserved throughout the nuclear receptor family and was originally proposed to comprise an unfolded hinge that facilitates rotation between the LBD and the DBD. Previous TR LBD structures, however, have indicated that the true unstructured region is three to six amino acid residues long and that the D-domain N terminus folds into a short amphipathic alpha-helix (H0) contiguous with the DBD and that the C terminus of the D-domain comprises H1 and H2 of the LBD. Here, we solve structures of TR-LBDs in different crystal forms and show that the N terminus of the TRalpha D-domain can adopt two structures; it can either fold into an amphipathic helix that resembles TRbeta H0 or form an unstructured loop. H0 formation requires contacts with the AF-2 coactivator-binding groove of the neighboring TR LBD, which binds H0 sequences that resemble coactivator LXXLL motifs. Structural analysis of a liganded TR LBD with small angle X-ray scattering (SAXS) suggests that AF-2/H0 interactions mediate dimerization of this protein in solution. We propose that the TR D-domain has the potential to form functionally important extensions of the DBD and LBD or unfold to permit TRs to adapt to different DNA response elements. We also show that mutations of the D domain LXXLL-like motif indeed selectively inhibit TR interactions with an inverted palindromic response element (F2) in vitro and TR activity at this response element in cell-based transfection experiments.

Structural insights into the beta-xylosidase from Trichoderma reesei obtained by synchrotron small-angle X-ray scattering and circular dichroism spectroscopy.

The enzyme beta-xylosidase from Trichoderma reesei, a member of glycosil hydrolase family 3 (GH3), is a glycoside hydrolase which acts at the glycosidic linkages of 1,4-beta-xylooligosaccharides and that also exhibits alpha-l-arabinofuranosidase activity on 4-nitrophenyl alpha-l-arabinofuranoside. In this work, we show that the enzyme forms monomers in solution and derive the low-resolution molecular envelope of the beta-xylosidase from small-angle X-ray scattering (SAXS) data using the ab initio simulated annealing algorithm. The radius of gyration and the maximum dimension of the beta-xylosidase are 30.3 +/- 0.2 and 90 +/- 5 A, respectively. In contrast to the fold of the only two structurally characterized members of GH3, the barley beta-d-glucan exohydrolase and beta-hexosaminidase from Vibrio cholerae, which have respectively two or one distinct domains, the shape of the beta-xylosidase indicates the presence of three distinct structural modules. Domain recognition algorithms were used to show that the C-terminal part of the amino acid sequence of the protein forms the third domain. Circular dichroism spectroscopy and secondary structure prediction programs demonstrate that this additional domain adopts a predominantly beta conformation.

Low resolution structural study of two human HSP40 chaperones in solution. DJA1 from subfamily A and DJB4 from subfamily B have different quaternary structures.

Proteins that belong to the heat shock protein (Hsp) 40 family assist Hsp70 in many cellular functions and are important for maintaining cell viability. A knowledge of the structural and functional characteristics of the Hsp40 family is therefore essential for understanding the role of the Hsp70 chaperone system in cells. In this work, we used small angle x-ray scattering and analytical ultracentrifugation to study two representatives of human Hsp40, namely, DjA1 (Hdj2/dj2/HSDJ/Rdj1) from subfamily A and DjB4 (Hlj1/DnaJW) from subfamily B, and to determine their quaternary structure. We also constructed low resolution models for the structure of DjA1-(1-332), a C-terminal-deleted mutant of DjA1 in which dimer formation is prevented. Our results, together with the current structural information of the Hsp40 C-terminal and J-domains, were used to generate models of the internal structural organization of DjA1 and DjB4. The characteristics of these models indicated that DjA1 and DjB4 were both dimers, but with substantial differences in their quaternary structures: whereas DjA1 consisted of a compact dimer in which the N and C termini of the two monomers faced each other, DjB4 formed a dimer in which only the C termini of the two monomers were in contact. The two proteins also differed in their ability to bind unfolded luciferase. Overall, our results indicate that these representatives of subfamilies A and B of human Hsp40 have different quaternary structures and chaperone functions.

Average protein density is a molecular-weight-dependent function.

The mass density of proteins is a relevant basic biophysical quantity. It is also a useful input parameter, for example, for three-dimensional structure determination by protein crystallography and studies of protein oligomers in solution by analytic ultracentrifugation. We have performed a critical analysis of published, theoretical, and experimental investigations about this issue and concluded that the average density of proteins is not a constant as often assumed. For proteins with a molecular weight below 20 kDa, the average density exhibits a positive deviation that increases for decreasing molecular weight. A simple molecular-weight-depending function is proposed that provides a more accurate estimate of the average protein density.

Conformation of the Z19 prolamin by FTIR, NMR, and SAXS.

The alpha zein, the maize storage prolamin, is a mixture of several homologous polypeptides that shows two bands in SDS-PAGE, called Z19 and Z22. The conformation studies carried out by several authors in this mixture are conflicting. To elucidate these inconsistencies, we analyzed the conformation of the Z19 fraction, extracted from BR451 maize variety by Fourier transform infrared spectroscopy, nuclear magnetic resonance, and small-angle X-ray scattering. The infrared results show that Z19 has 46% of alpha helix and 22% of beta sheet. The fast N-H to N-D exchange measured by (1)H NMR spectroscopy showed that Z19 is not a compact structure. The scattering measurements indicated an extended structure with 12 by 130 A. With these data, we have modeled the Z19 structure as a hairpin, composed of helical, sheet, turns, and secondary structures, folded back on itself.

Free human mitochondrial GrpE is a symmetric dimer in solution.

The co-chaperone GrpE is essential for the activities of the Hsp70 system, which assists protein folding. GrpE is present in several organisms, and characterization of homologous GrpEs is important for developing structure-function relationships. Cloning, producing, and conformational studies of the recombinant human mitochondrial GrpE are reported here. Circular dichroism measurements demonstrate that the purified protein is folded. Thermal unfolding of human GrpE measured both by circular dichroism and differential scanning calorimetry differs from that of prokaryotic GrpE. Analytical ultracentrifugation data indicate that human GrpE is a dimer, and the sedimentation coefficient agrees with an elongated shape model. Small angle x-ray scattering analysis shows that the protein possesses an elongated shape in solution and demonstrates that its envelope, determined by an ab initio method, is similar to the high resolution envelope of Escherichia coli GrpE bound to DnaK obtained from single crystal x-ray diffraction. However, in these conditions, the E. coli GrpE dimer is asymmetric because the monomer that binds DnaK adopts an open conformation. It is of considerable importance for structural GrpE research to answer the question of whether the GrpE dimer is only asymmetric while bound to DnaK or also as a free dimer in solution. The low resolution structure of human GrpE presented here suggests that GrpE is a symmetric dimer when not bound to DnaK. This information is important for understanding the conformational changes GrpE undergoes on binding to DnaK.

Low resolution structures of the retinoid X receptor DNA-binding and ligand-binding domains revealed by synchrotron X-ray solution scattering.

Nuclear receptors are ligand-inducible transcription factors that share structurally related DNA-binding (DBD) and ligand-binding (LBD) domains. Biochemical and structural studies have revealed the modular nature of DBD and LBD. Nevertheless, the domains function in concert in vivo. While high-resolution crystal structures of nuclear receptor DBDs and LBDs are available, there are no x-ray structural studies of nuclear receptor proteins containing multiple domains. We report the solution structures of the human retinoid X receptor DBD-LBD (hRXRalphaDeltaAB) region. We obtained ab initio shapes of hRXRalphaDeltaAB dimer and tetramer to 3.3 and 1.7 nm resolutions, respectively, and established the position and orientation of the DBD and LBD by fitting atomic coordinates of hRXRalpha DBD and LBD. The dimer is U-shaped with DBDs spaced at approximately 2 nm in a head to head orientation forming an angle of about 10 degrees with respect to each other and with an extensive interface area provided by the LBD. The tetramer is a more elongated X-shaped molecule formed by two dimers in head to head arrangement in which the DBDs are extended from the structure and spaced at about 6 nm. The close proximity of DBDs in dimers may facilitate homodimer formation on DNA; however, for the homodimer to bind to a DNA element containing two directly repeated half-sites, one of the DBDs would need to rotate with respect to the other element. By contrast, the separation of DBDs in the tetramers may account for their decreased ability to recognize DNA.

Domain motions and quaternary packing of phosphofructokinase-2 from Escherichia coli studied by small angle x-ray scattering and homology modeling.

The binding of MgATP and fructose-6-phosphate to phosphofructokinase-2 from Escherichia coli induces conformational changes that result in significant differences in the x-ray-scattering profiles compared with the unligated form of the enzyme. When fructose- 6-phosphate binds to the active site of the enzyme, the pair distribution function exhibits lower values at higher distances, indicating a more compact structure. Upon binding of MgATP to the allosteric site of the enzyme, the intensity at lower angles increases as a consequence of tetramer formation, but differences along higher angles also suggest changes at the tertiary structure level. We have used homology modeling to build the native dimeric form of phosphofructokinase-2 and fitted the experimental scattering curves by using rigid body movements of the domains in the model, similar to those observed in known homologous structures. The best fit with the experimental data of the unbound protein was achieved with open conformations of the domains in the model, whereas domain closure improves the agreement with the scattering of the enzyme-fructose-6-phosphate complex. Using the same approach, we utilized the scattering curve of the phosphofructokinase-2-MgATP complex to model the arrangement and conformation of dimers in the tetramer. We observed that, along with tetramerization, binding of MgATP to the allosteric site induces domain closure. Additionally, we used the scattering data to restore the low resolution structure of phosphofructokinase-2 (free and bound forms) by an ab initio procedure. Based on these findings, a proposal is made to account for the inhibitory effect of MgATP on the enzymatic activity.