RESUMO
In this work, a multivariate approach was utilized for gaining some insights into the processing-structure-properties relationships in polyethylene-based blends. In particular, two high-density polyethylenes (HDPEs) with different molecular weights were melt-compounded using a twin-screw extruder, and the effects of the screw speed, processing temperature and composition on the microstructure of the blends were evaluated based on a Design of Experiment-multilinear regression (DoE-MLR) approach. The results of the thermal characterization, interpreted trough the MLR (multilinear regression) response surfaces, demonstrated that the composition of the blends and the screw rotation speed are the two most important parameters in determining the crystallinity of the materials. Furthermore, the rheological data were examined using a Principal Component Analysis (PCA) multivariate approach, highlighting also in this case the most prominent effect of the weight ratio of the two base polymers and the screw rotation speed.
RESUMO
In a singular period, such as during a pandemic, the use of personal protective masks can become mandatory for all citizens in many places worldwide. The most used device is the disposable mask that, inevitably, generates a substantial waste flow to send to incineration or landfill. The article examines the most diffused type of disposable face mask and identifies the characteristic of the constituent materials through morphological, chemical, physical, and thermal analyses. Based on these investigations, a mechanical recycling protocol with different approaches is proposed. Advantages and disadvantages of the different recycling solutions are discussed with considerations on necessary separation processes and other treatments. The four solutions investigated lead to a recycling index from 78 to 91% of the starting disposable mask weight. The rheological, mechanical, and thermo-mechanical properties of the final materials obtained from the different recycling approaches are compared with each other and with solutions present on the market resulting in materials potentially industrially exploitable.
RESUMO
The purpose of this work was to evaluate and improve the flammability and combustion behavior of the polyethylene-based material obtained from the recycling of Tetra Pak® (PEAL) to widen its use to applications where these properties are required. Firstly, its thermal stability was investigated with thermogravimetric analysis, resulting in an enhancement in the main degradation step temperature (from 385 °C to 421 °C) due to the presence of the aluminum-flakes. Then, to improve the poor flammability (HB in UL-94 test) and combustion behavior (Fire Performance Index of 0.07) of the raw material, two flame retardant approaches were tested: an intumescent system made of ammonium polyphosphate and pentaerythritol, and magnesium hydroxide. In addition, the effectiveness of polyethylene as a charring agent was evaluated. Characterization was made with UL-94, cone calorimeter, and morphologic analysis. For all the materials tested, the temperature of the main weight loss step increased and the flammability rating improved (V2 for intumescent and V0 for magnesium hydroxide reached). Moreover, fire hazard decreased (Fire Performance Index of 0.15 and 0.55; Flame Retardancy Index of 2.6 and 10.0). Referring to the morphology, full compatibility was found in the PEAL-magnesium hydroxide compound, while PEAL-intumescent appeared as a heterogeneous system.
