The EU regulatory landscape of non-biological complex drugs (NBCDs) follow-on products: Observations and recommendations.

"Non-biological complex drugs" (NBCDs), such as liposomal formulations, iron-carbohydrate complexes and glatiramoids, gained increased interest from a regulatory perspective in recent years. Similar to biologics, the quality of NBCD products is highly dependent on a robust and well-controlled manufacturing process. This provides challenges for generic drug developers to replicate NBCD products once market exclusivity of the originator product is expired. However, unlike biologics for which a consistent regulatory framework was established with the biosimilars pathway, NBCDs are not recognised as a distinct category of medicines and hence no formal regulatory pathway for their approval is defined. Currently, a "case-by-case" approach is applied for regulating NBCD follow-on products in the EU. Furthermore, NBCDs can follow a non-centralised authorisation procedure, leaving regulatory approvals to national competent authorities. This can lead to heterogeneity in the regulatory approach and outcomes when assessing NBCD follow-on products throughout the EU, which for some product classes has already resulted in some safety and efficacy implications. Here, we explore the regulatory landscape of NBCDs and their follow on products. This study shows that almost all of the 85 NBCD follow-on products available in the EU in 2018 have been approved via various non-centralised procedures. Although most NBCD follow-on products followed an Article 10(1) procedure, we clearly see a recent increase of the use of the hybrid pathway via Article 10(3). This study shows the heterogeneity in the regulatory approach taken for many NBCD follow on products. To what extent this may have consequences for their safety and efficacy evaluations is unknown and needs to be further investigated. The present study should stimulate the rethinking to design prudent regulatory pathways for NBCD follow-on products.

Equivalence of glatiramer acetate products: challenges in assessing pharmaceutical equivalence and critical clinical performance attributes.

INTRODUCTION: This review discusses the challenges to characterize and evaluate the peptide based drug glatiramer acetate (GA) and its follow-on products used for treatment of multiple sclerosis patients. AREAS COVERED: GA is a highly complex mixture of peptides consisting of four amino acids. The various (physico)-chemical approaches and bioassays used for characterizing this complex drug product are described. It is not possible to link data from preclinical performance to outcomes observed in clinical trials as no critical attributes suitable for predicting the clinical performance in MS patients have been identified yet. The limited insight into the precise mechanism(s) of action of GA may explain why these critical clinical performance attributes still have not been identified. EXPERT OPINION: The complexity of GA and lack of understanding of critical clinical performance attributes leads to a number of issues to be resolved as they hamper industry and regulatory bodies in designing and evaluating follow-on/generic applications of GA. The following questions are waiting to be addressed: Preclinical characterization vs clinical outcome: what is the relation? What are possible biomarkers? How to choose the right patient group? What is the experience with existing follow-on versions? Is there a place for GA 'betters'? How to evaluate existing and draft new guidance documents and pharmacopoeial monographs?

Flow cytometry for rapid size determination and sorting of nucleic acid containing nanoparticles in biological fluids.

A method based on flow cytometry was developed which allows measurement of particle size distributions of nanoparticles directly in biological fluids and preparative sorting into distinct size fractions. Fluorescently labelled beads of distinct sizes (0.1-2 microm) were used to establish a correlation between diameter and side scattering intensity (SSC). Simultaneous detection of fluorescence and SSC allowed us to set a threshold on fluorescence thereby providing the possibility to distinguish nanoparticles of interest from other particulate matter (e.g. low density lipoproteins or other serum components) which is frequently present in biological fluids. Finally, a proof of principle was established for sorting a heterogeneous submicron particle population into separate size fractions.

Preparation and characterization of protein loaded microspheres based on a hydroxylated aliphatic polyester, poly(lactic-co-hydroxymethyl glycolic acid).

The purpose of this study was to investigate the suitability of a novel hydroxylated aliphatic polyester, poly(lactic-co-hydroxymethyl glycolic acid) (PLHMGA), as controlled release system for pharmaceutical proteins. Dextran Blue (as a macromolecular model compound) and lysozyme-loaded PLHMGA and PLGA (control formulation) microspheres were prepared by a solvent evaporation technique. The Dextran Blue and lysozyme loaded PLHMGA microspheres prepared with 10% polymer solution showed, because of a high porosity, a high burst release (35-75%) and the remaining content was released in a sustained manner for 15-20 days. The microspheres prepared with 15 and 20% polymer solution had a lower porosity and showed a pulsed release after day 8 and in 27 days they released more than 90% of Blue Dextran. The release of lysozyme was incomplete, likely due to aggregation of part of the encapsulated protein. Spectroscopic analysis of the released lysozyme indicated fully preserved secondary/tertiary structure and an enzyme activity assay showed that the specific activity of the released protein was maintained. An in vitro degradation study showed that the release of Blue Dextran and lysozyme is essentially controlled by the degradation of the microspheres. This study shows that microspheres made of the hydroxylated aliphatic polyester, poly(lactic-co-hydroxymethyl glycolic acid), are promising systems for the controlled release of pharmaceutical proteins.

Fluorescence in situ hybridization to monitor the intracellular location and accessibility of plasmid DNA delivered by cationic polymer-based gene carriers.

Information about the intracellular trafficking of exogenous DNA delivered by nonviral gene delivery systems is of major importance for optimization of such gene carriers. We used fluorescence in situ hybridization (FISH) as a tool to visualize polyplex-delivered pDNA inside cells. This avoids the need to directly label DNA inside the polyplexes, which may influence their cellular behavior and fate. Using FISH the introduced plasmid DNA could be detected in the cytosol and nucleus of different cell lines. The FISH probe itself did not interact with cells nor different polymers used for condensing the DNA. We further demonstrate differences in accessibility of polyplex-delivered DNA when different polymers were used for DNA complexation. Therefore, FISH is a valuable tool to detect location and accessibility of exogenous plasmid DNA delivered in the cell by cationic polymers.

Preclinical and clinical in vitro in vivo correlation of an hGH dextran microsphere formulation.

PURPOSE: To investigate the in vitro in vivo correlation of a sustained release formulation for human growth hormone (hGH) based on hydroxyethyl methacrylated dextran (dex-HEMA) microspheres in Pit-1 deficient Snell dwarf mice and in healthy human volunteers. MATERIALS AND METHODS: A hGH-loaded microsphere formulation was developed and tested in Snell dwarf mice (pharmacodynamic study) and in healthy human volunteers (pharmacokinetic study). RESULTS: Single subcutaneous administration of the microspheres in mice resulted in a good correlation between hGH released in vitro and in vivo effects for the hGH-loaded microsphere formulation similar to daily injected hGH indicating a retained bioactivity. Testing the microspheres in healthy volunteers showed an increase (over 7-8 days) in hGH serum concentrations (peak concentrations: 1-2.5 ng/ml). A good in vitro in vivo correlation was obtained between the measured and calculated (from in vitro release data) hGH serum concentrations. Moreover, an increased serum concentration of biomarkers (insulin-like growth factor-I (IGF-I), IGF binding protein-3 (IGFBP-3) was found again indicating that bioactive hGH was released from the microspheres. CONCLUSIONS: Good in vitro in vivo correlations were obtained for hGH-loaded dex-HEMA microspheres, which is an important advantage in predicting the effect of the controlled drug delivery product in a clinical situations.

Effect of excipients on the encapsulation efficiency and release of human growth hormone from dextran microspheres.

The possibility was investigated to modulate the encapsulation efficiency and release of human growth hormone (hGH) from hydroxyl ethyl methacrylated dextran (dex-HEMA) hydrogel microspheres by using excipients. Microspheres were prepared by polymerization of dex-HEMA in an aqueous two-phase system of this polymer and PEG with or without excipients (Tween 80, pluronic F68, sucrose, NaCl, urea or methionine). High hGH encapsulation efficiencies (50-70%) were obtained for microspheres prepared without excipients and with Tween 80, NaCl or methionine. Substantially lower encapsulation efficiencies (27% and 19%, respectively) were obtained for microspheres prepared in the presence of sucrose and urea, which was attributed to the more favoured partitioning of hGH over the PEG-phase due to higher hydrophobicity of the (partly) denatured hGH. Likely, differences in precipitate size of the encapsulated hGH resulted in different release profiles between microspheres prepared without excipients (biphasic release: 2 days delay time followed by 6 days release) and the release profile for microspheres prepared with Tween 80, pluronic F68, sucrose, NaCl and urea (release over a period of 6-8 days (without a delay time)). Microspheres prepared with methionine showed a concentration-dependent delay time varying from 0 to 2 days followed by almost zero-order release over 6 days, attributed to the effect of methionine on the polymerization of dex-HEMA. Especially, Tween 80 and methionine are attractive excipients since hGH was encapsulated in high yield (60-70%) and the protein was released from the microspheres mainly in its monomeric form without a delay time and with an almost zero-order release over 6-8 days.

Cellular uptake of cationic polymer-DNA complexes via caveolae plays a pivotal role in gene transfection in COS-7 cells.

PURPOSE: Knowledge about the uptake mechanism and subsequent intracellular routing of non-viral gene delivery systems is important for the development of more efficient carriers. In this study we compared two established cationic polymers pDMAEMA and PEI with regard to their transfection efficiency and mechanism of cellular uptake. MATERIALS AND METHODS: The effects of several inhibitors of particular cellular uptake routes on the uptake of polyplexes and subsequent gene expression in COS-7 cells were investigated using FACS and transfection. Moreover, cellular localization of fluorescently labeled polyplexes was assessed by spectral fluorescence microscopy. RESULTS: Both pDMAEMA- and PEI-complexed DNA showed colocalization with fluorescently-labeled transferrin and cholera toxin after internalization by COS-7 cells, which indicates uptake via the clathrin- and caveolae-dependent pathways. Blocking either routes of uptake with specific inhibitors only resulted in a marginal decrease in polyplex uptake, which may suggest that uptake routes of polyplexes are interchangeable. Despite the marginal effect of inhibitors on polyplex internalization, blocking the caveolae-mediated uptake route resulted in an almost complete loss of polyplex-mediated gene expression, whereas gene expression was not negatively affected by blocking the clathrin-dependent route of uptake. CONCLUSIONS: These results show the importance of caveolae-mediated uptake for successful gene expression and have implications for the rational design of non-viral gene delivery systems.

An NLS peptide covalently linked to linear DNA does not enhance transfection efficiency of cationic polymer based gene delivery systems.

BACKGROUND: Transfection with non-viral gene delivery vectors, such as cationic polymers, generally results in low transgene expression in vivo. This is likely due to poor cytoplasmic transport and intra-nuclear DNA delivery. METHODS: In this study two strategies to improve nuclear import were investigated. Linear DNA constructs with or without an NLS peptide were prepared by PCR. Alternatively, linear DNA obtained by enzymatic cleavage followed by capping of both ends with DNA-hairpins was used. An NLS peptide was attached to one of the capped ends of the linear DNA. Both biodegradable (pDMAEAppz) and non-degradable polymers (PEI or pDMAEMA) were used to complex the DNA. Several cell types, dividing and non-dividing, were transfected with the linear DNA constructs containing a SV40-derived NLS peptide. Nuclear import of the DNA constructs was studied using digitonin-permeabilized cells. RESULTS: Linear DNA prepared by PCR proved not useful as it was degraded from the 3'end. Linear DNA capped with hairpins was more successful with regard to stability. However, Cells transfected with linear DNA constructs by electroporation or by using cationic polymers with linear DNA containing a NLS peptide, failed to show significantly higher luciferase expression levels when compared to cells transfected with plasmid DNA or linear DNA without an NLS peptide attached. No nuclear localization was observed in digitonin-permeabilized cells. CONCLUSION: Taken together, these data demonstrate that this nuclear localisation signal when attached to DNA is neither able to improve transfection efficiency of cationic polymers nor the nuclear import of the DNA constructs.

Steric stabilization of poly(2-(dimethylamino)ethyl methacrylate)-based polyplexes mediates prolonged circulation and tumor targeting in mice.

BACKGROUND: Efficient tumor targeting of polymeric gene transfer systems (polyplexes) represents a major challenge. To establish tumor targeting after intravenous (IV) administration, the circulation lifetime of these systems should be sufficiently long. Since naked polyplexes are rapidly eliminated from the circulation after IV adminstration, strategies have to be developed to improve their pharmacokinetics. METHODS: Complexes of plasmid DNA and poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA)-graft-PEG or AB di-block copolymers of pDMAEMA and PEG, as well as PEGylated complexes prepared via PEGylation of preformed complexes (postPEGylation), were evaluated for their physicochemical properties (size and charge) their interactions with blood constituents and transfection activity in vitro. The pharmacokinetics and biodistribution of PEG-polyplexes were studied in mice after IV administration. The degree of accumulation in two subcutaneous (SC) mouse tumors after IV administration was evaluated for the system with the longest circulation time. RESULTS: It is shown that the surface charge of the pDMAEMA-polyplexes was effectively shielded by two PEGylation methods (i.e. the use of pDMAEMA-graft-PEG polymers and postPEGylation). The shielding effect was the highest for the postPEGylation method with PEG(20000), yielding polyplexes that hardly show interactions with blood components (i.e. albumin and erythrocytes) and show substantially prolonged circulation time in mice after IV administration. The superior colloidal stability and circulation kinetics of the postPEGylated polyplexes translated into tumor accumulation which amounted to about 3.5% of the injected dose per gram tumor tissue in a SC Neuro2A tumor model and to about 4.2% of the injected dose per gram tumor tissue in a SC C26 tumor model. CONCLUSIONS: This study shows that postPEGylation of pDMAEMA-based polyplexes is the most attractive method to prepare polyplexes with long circulating properties. Tumor targeting capacity after intravenous administration was demonstrated in two subcutaneous tumor models.

Water-soluble biodegradable cationic polyphosphazenes for gene delivery.

Polyphosphazenes bearing cationic moieties were synthesized from poly(dichloro)phosphazene, which in turn was obtained by thermal polymerization of hexachlorocyclotriphosphazene in 1,2,4-trichlorobenzene. Next, either 2-dimethylaminoethanol (DMAE) or 2-dimethylaminoethylamine (DMAEA) side groups were introduced by a substitution reaction. The polymers were purified by dialysis against water and tetrahydrofuran, lyophilized and evaluated as polymeric transfectants. The polyphosphazenes were able to bind plasmid DNA yielding positively charged particles (polyplexes) with a size around 80 nm at a polymer/DNA ratio of 3:1 (w/w). The polyphosphazene-based polyplexes were able to transfect COS-7 cells in vitro with an efficiency comparable to a well-known polymeric transfectant [poly(2-dimethylaminoethyl methacrylate), pDMAEMA]. The toxicity of both polyphosphazenes was lower than pDMAEMA. The transfection efficiency for the poly(DMAE)phosphazene-based polyplexes was about threefold higher in the absence of serum than in the presence of 5.0% fetal bovine serum. This is probably caused by unfavorable interactions of the polyplexes with serum proteins. In contrast, the poly(DMAEA)phosphazene-based polyplexes showed a threefold lower transfection activity in the absence of serum. For this system, serum proteins likely masked the toxicity of the polyplexes, as shown by the XTT cell viability assay and confocal laser scanning microscopy studies. Preliminary degradation studies indicate that the polymers were indeed degradable. The half-life at pH 7.5 and 37 degrees C was around 7 days for poly(DMAE)phosphazenes and 24 days for poly(DMAEA)phosphazenes. This study shows that polyphosphazenes are a suitable and promising new class of biodegradable polymeric carriers for gene delivery.

Preparation and characterization of folate-targeted pEG-coated pDMAEMA-based polyplexes.

A folate-poly(ethylene glycol) conjugate capable of covalent coupling to primary amines present at the surface of polyplexes was developed. Coating of poly(dimethylaminomethyl methacrylate (pDMAEMA)-based polyplexes with this folate-pEG conjugate led to a sharp decrease of the zeta-potential, and a small increase in particle size. The size of the particles in isotonic medium did not change markedly in time demonstrating that rather stable particles were formed. The in vitro cellular toxicity of the pEGylated polyplexes with and without folate ligands was lowered considerably compared to uncoated polyplexes. The toxicity observed for the targeted pEGylated polyplexes was slightly higher than that of corresponding untargeted polyplexes, which might indicate an increased cellular association of targeted polyplexes. Transfection of OVCAR-3 cells in vitro was markedly increased compared to untargeted pEGylated polyplexes, suggesting targeted gene delivery.

Chemical hydrolysis of DOTAP and DOPE in a liposomal environment.

In this study the hydrolysis kinetics of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) and 1,2-dioleoyltrimethylammoniumpropane (DOTAP) in net neutral DPPC-DOPE (3:1, mol/mol) and cationic DOTAP-DOPE (1:1, mol/mol) liposomes are described. The log k(obs)-pH profile for DOTAP-DOPE liposomes differs markedly from earlier observed hydrolysis profiles: the slope approaches zero in the acidic region and +1 in the alkaline region. The concept of amine-influenced hydrolysis is introduced to explain the lack of pH dependency in the acidic region of the log k(obs)-pH profiles.

Targeting influenza virosomes to ovarian carcinoma cells.

Reconstituted influenza virus envelopes (virosomes) containing the viral hemagglutinin (HA) have attracted attention as delivery vesicles for cytosolic drug delivery as they possess membrane fusion activity. Here, we show that influenza virosomes can be targeted towards ovarian carcinoma cells (OVCAR-3) with preservation of fusion activity. This was achieved by incorporating poly(ethylene glycol) (PEG)-derivatized lipids into the virosome membrane. This PEG layer serves as shield to prevent interaction of HA with ubiquitous sialic acid residues and as spatial anchor for antibody attachment. Coupling of Fab' fragments of mAb 323/A3 (anti-epithelial glycoprotein-2) to the distal ends of PEG lipids resulted in specific binding of virosomes to OVCAR-3 cells. These antibody-redirected virosomes fused with membranes of OVCAR-3 cells in a pH-dependent fashion.

Fourier transform infrared spectrometric analysis of protein conformation: effect of sampling method and stress factors.

Changes in the amide bands in Fourier transform infrared spectra of proteins are generally attributed to alterations in protein secondary structure. In this study spectra of five different globular proteins were compared in the solid and solution states recorded with several sampling techniques. Spectral differences for each protein were observed between the various sampling techniques and physical states, which could not all be explained by a change in protein secondary structure. For example, lyophilization in the absence of lyoprotectants caused spectral changes that could (partially) have been caused by the removal of hydrating water molecules rather than secondary structural changes. Moreover, attenuated total reflectance spectra of proteins in H2O were not directly comparable to transmission spectra due to the anomalous dispersion effect. Our study also revealed that the amide I, II, and III bands differ in their sensitivities to changes in protein conformation: For example, strong bands in the region 1620-1630 and 1685-1695 cm(-1) were seen in the amide I region of aggregated protein spectra. Surprisingly, absorbance of such magnitudes was not observed in the amide II and III region. It appears, therefore, that only the amide I can be used to distinguish between intra- and intermolecular beta-sheet formation. Considering the differing sensitivity of the different amide modes to structural changes, it is advisable to utilize not only the amide I band, but also the amide II and III bands, to determine changes in protein secondary structure. Finally, it is important to realize that changes in these bands may not always correspond to secondary structural changes of the proteins.

Lipid-coated polyplexes for targeted gene delivery to ovarian carcinoma cells.

A nonviral gene delivery vector has been developed in our laboratory based on the cationic polymer, poly(2-(dimethylethylamino)ethyl methacrylate) (p(DMAEMA)). p(DMAEMA)-based polyplexes have been successfully used for the transfection of OVCAR-3 cells in vitro. However, these polyplexes were unable to transfect OVCAR-3 cells growing in the peritoneal cavity of nude mice after intraperitoneal administration, which could be ascribed to inactivation by components (including hyaluronic acid) present in the tumor ascitic fluid. The present work aimed at (a) protecting p(DMAEMA)-based polyplexes against destabilization or inactivation by polyanions such as hyaluronic acid present in tumor ascitic fluid and (b) enhancing cellular uptake of the protected p(DMAEMA)-based polyplexes by targeting with antibody Fab' fragments. To fulfill these requirements, we have developed a detergent removal method to coat polyplexes with anionic lipids. With this method, spherical particles of approximately 125 nm, which were protected from destabilization by polyanions, were obtained. More importantly, the transfection efficiency of lipopolyplexes was unaffected in the presence of hyaluronic acid, indicating that lipid coating of polyplexes protects against destabilization by hyaluronic acid. By conjugating antibody Fab' fragments directed against the epithelial glycoprotein-2 to the lipidic surface of these lipopolyplexes, target cell-specific transfection of OVCAR-3 cells could be obtained in vitro.

The influence of the incorporation of cholesterol and water on the particle size, bilayer thickness, melting behavior, and relative sucrose ester composition of reversed vesicles.

The influence of the incorporation of cholesterol and water on the particle size, bilayer thickness, melting behavior, and relative sucrose ester composition of reversed vesicles was studied. Reversed vesicles (RVs) were prepared of sucrose ester in silicon oil by sonication. The RVs were characterized by polarized light microscopy, laser diffraction, high-performance liquid chromatography, small angle X-ray scattering (SAXS), and differential scanning calorimetry. The particle size distributions of the studied dispersions were bimodal with peaks at 5 and 0.4 microm. There was no significant difference in the sucrose ester composition of these two size categories of RVs. The incorporation of cholesterol and water had no effect on the size distribution of the RVs. The SAXS results showed that the RVs prepared without cholesterol and water consisted of bilayers with fully interdigitated alkyl chains. The incorporation of high concentrations of cholesterol caused a phase separation within the bilayers. The incorporation of water also resulted in a phase separation within the bilayers but at a lower cholesterol concentration. The presence of two different size classes of RVs in one RVs dispersion and the phase separation within the bilayers of certain compositions can have consequences for the application of RVs.