RESUMO
A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.
RESUMO
The control of structural and chemical transitions in bimetallic nanoalloys at finite temperatures is one of the challenges for their use in advanced applications. Comparing Nested Sampling and Molecular Dynamics simulations, we investigate the phase changes of CuPt nanoalloys with the aim to elucidate the role of kinetic effects during their solidification and melting processes. We find that the quasi-thermodynamic limit for the nucleation of (CuPt)309 is 965 ± 10 K, but its prediction is increasingly underestimated when the system is cooled faster than 109 K/s. The solidified nanoparticles, classified following a novel tool based on Steinhardt parameters and the relative orientation of characteristic atomic environments, are then heated back to their liquid phase. We demonstrate the kinetic origin of the hysteresis in the caloric curve as (i) it closes for rates slower than 108 K/s, with a phase change temperature of 970 K ± 25 K, in very good agreement with its quasi-thermodynamic limit; (ii) the process happens simultaneously in the inner and outer layers; (iii) an onion-shell chemical order - Cu-rich surface, Pt-rich sub-surface, and mixed core - is always preserved.
RESUMO
We report an extensive study of the errors of density functional theory (DFT) approximations for compressed water systems. The approximations studied are based on the widely used PBE and BLYP exchange-correlation functionals, and we characterize their errors before and after correction for 1- and 2-body errors, the corrections being performed using the methods of Gaussian approximation potentials. The errors of the uncorrected and corrected approximations are investigated for two related types of water system: first, the compressed liquid at temperature 420 K and density 1.245 g/cm(3) where the experimental pressure is 15 kilobars; second, thermal samples of compressed water clusters from the trimer to the 27-mer. For the liquid, we report four first-principles molecular dynamics simulations, two generated with the uncorrected PBE and BLYP approximations and a further two with their 1- and 2-body corrected counterparts. The errors of the simulations are characterized by comparing with experimental data for the pressure, with neutron-diffraction data for the three radial distribution functions, and with quantum Monte Carlo (QMC) benchmarks for the energies of sets of configurations of the liquid in periodic boundary conditions. The DFT errors of the configuration samples of compressed water clusters are computed using QMC benchmarks. We find that the 2-body and beyond-2-body errors in the liquid are closely related to similar errors exhibited by the clusters. For both the liquid and the clusters, beyond-2-body errors of DFT make a substantial contribution to the overall errors, so that correction for 1- and 2-body errors does not suffice to give a satisfactory description. For BLYP, a recent representation of 3-body energies due to Medders, Babin, and Paesani [J. Chem. Theory Comput. 9, 1103 (2013)] gives a reasonably good way of correcting for beyond-2-body errors, after which the remaining errors are typically 0.5 mE(h) ≃ 15 meV/monomer for the liquid and the clusters.
RESUMO
We show the feasibility of using quantum Monte Carlo (QMC) to compute benchmark energies for configuration samples of thermal-equilibrium water clusters and the bulk liquid containing up to 64 molecules. Evidence that the accuracy of these benchmarks approaches that of basis-set converged coupled-cluster calculations is noted. We illustrate the usefulness of the benchmarks by using them to analyze the errors of the popular BLYP approximation of density functional theory (DFT). The results indicate the possibility of using QMC as a routine tool for analyzing DFT errors for non-covalent bonding in many types of condensed-phase molecular system.
RESUMO
Standard forms of density-functional theory (DFT) have good predictive power for many materials, but are not yet fully satisfactory for cluster, solid, and liquid forms of water. Recent work has stressed the importance of DFT errors in describing dispersion, but we note that errors in other parts of the energy may also contribute. We obtain information about the nature of DFT errors by using a many-body separation of the total energy into its 1-body, 2-body, and beyond-2-body components to analyze the deficiencies of the popular PBE and BLYP approximations for the energetics of water clusters and ice structures. The errors of these approximations are computed by using accurate benchmark energies from the coupled-cluster technique of molecular quantum chemistry and from quantum Monte Carlo calculations. The systems studied are isomers of the water hexamer cluster, the crystal structures Ih, II, XV, and VIII of ice, and two clusters extracted from ice VIII. For the binding energies of these systems, we use the machine-learning technique of Gaussian Approximation Potentials to correct successively for 1-body and 2-body errors of the DFT approximations. We find that even after correction for these errors, substantial beyond-2-body errors remain. The characteristics of the 2-body and beyond-2-body errors of PBE are completely different from those of BLYP, but the errors of both approximations disfavor the close approach of non-hydrogen-bonded monomers. We note the possible relevance of our findings to the understanding of liquid water.
RESUMO
We present a detailed quantum oscillation study of the Fermi surface of the recently discovered Yb-based heavy fermion superconductor beta-YbAlB4. We compare the data, obtained at fields from 10 to 45 T, to band structure calculations performed using the local density approximation. Analysis of the data suggests that f holes participate in the Fermi surface up to the highest magnetic fields studied. We comment on the significance of these findings for the unconventional superconducting properties of this material.
RESUMO
We report on the extraordinary superionic conductivity in the fulleride polymer Li4C60, a crystalline material with no disorder. 7Li, NMR, and dc frequency dependent conductivity show uncorrelated ionic hopping across small energy barriers (DeltaE_{a} approximately 200 meV) and an ionic conductivity of 10;{-2} S/cm at room temperature, higher than in "standard" ionic conductors. Ab initio calculations of the molecular structure find intrinsic unoccupied interstitial sites that can be filled by Li+ cations in stoichiometric Li4C60 even at low temperatures. The low energy required for the occupation of these sites allows a sizable Li+ diffusion above 130 K. The results suggest novel application of lithium intercalated fullerides as electrodes in Li ions batteries.
RESUMO
We present the temperature dependence of the growth rate of carbon nanofibers by plasma-enhanced chemical vapor deposition with Ni, Co, and Fe catalysts. We extrapolate a common low activation energy of 0.23-0.4 eV, much lower than for thermal deposition. The carbon diffusion on the catalyst surface and the stability of the precursor molecules, C2H2 or CH4, are investigated by ab initio plane wave density functional calculations. We find a low activation energy of 0.4 eV for carbon surface diffusion on Ni and Co (111) planes, much lower than for bulk diffusion. The energy barrier for C2H2 and CH4 dissociation is at least 1.3 eV and 0.9 eV, respectively, on Ni(111) planes or step edges. Hence, the rate-limiting step for plasma-enhanced growth is carbon diffusion on the catalyst surface, while an extra barrier is present for thermal growth due to gas decomposition.
RESUMO
During their production, single-walled carbon nanotubes form bundles. Owing to the weak van der Waals interaction that holds them together in the bundle, the tubes can easily slide on each other, resulting in a shear modulus comparable to that of graphite. This low shear modulus is also a major obstacle in the fabrication of macroscopic fibres composed of carbon nanotubes. Here, we have introduced stable links between neighbouring carbon nanotubes within bundles, using moderate electron-beam irradiation inside a transmission electron microscope. Concurrent measurements of the mechanical properties using an atomic force microscope show a 30-fold increase of the bending modulus, due to the formation of stable crosslinks that effectively eliminate sliding between the nanotubes. Crosslinks were modelled using first-principles calculations, showing that interstitial carbon atoms formed during irradiation in addition to carboxyl groups, can independently lead to bridge formation between neighbouring nanotubes.
Assuntos
Nanotubos de Carbono/química , Partículas beta , Reagentes de Ligações Cruzadas , Microscopia Eletrônica , Nanotubos de Carbono/efeitos da radiação , Nanotubos de Carbono/ultraestrutura , Resistência à TraçãoRESUMO
CONTEXT: A new law enabling curriculum reform led a small circle of interested faculty members at the University of Vienna medical school to launch the Medizin Curriculum Wien project (MCW) to plan a new curriculum under the supervision of the Committee on Educational Affairs (Studienkommission). OBJECTIVE: The first stage of the project dealt with the definition of a profile of competencies (Qualifikationsprofil), which describes all the competencies we want our students to possess upon graduation. METHOD: This paper presents the approach to and process of defining this profile at one of Europe's largest medical schools, currently enrolling over 1500 new students per year. The procedure involved: preparing materials; communication with stakeholders; information dissemination; feedback gathering; information structuring, and formulating the profile of competencies. RESULTS: Application of the outlined steps in two rounds proved successful for the development of a profile of student competencies for Vienna. General acceptance and awareness of the new profile as well as commitment for a further reform process was engendered. The distinct characteristics of the profile are discussed. CONCLUSION AND UTILIZATION: A profile of student competencies must balance the demanding objectives of curriculum planners and the actual challenges presented by many local parameters; this can be done by employing the process outlined in this paper. The defined profile serves as an accepted reference point in the further development of the medical curriculum.