Spacer Conformation Induced Multiple Hydrogen Bonds in 2D Perovskite toward Highly Efficient Optoelectronic Devices.

Two-dimensional (2D) Dion-Jacobson (DJ) perovskites typically outperform Ruddlesden-Popper (RP) analogs in terms of photodetection (PD). However, the mechanism behind this enhanced performance remains elusive. Theoretical calculations for elucidating interlayer spacer conformation-induced multiple hydrogen bonds in 2D perovskite are presented, along with the synthesis of DPAPbBr4 (DPB) single crystals (SCs) and their PD properties under X-ray/ultraviolet (UV) excitation. The high-quality DPB SC enhances PD with exceptional photoresponse attributes, including a high on/off ratio (4.89 × 104), high responsivity (2.44 A W⁻1), along with large dynamic linear range (154 dB) and low detection limit (7.1 nW cm⁻2), which are currently the best results among 2D perovskite SC detectors, respectively. Importantly, high-resolution images are obtained under UV illumination with weak light levels. The SC X-ray detector exhibits a high sensitivity of 663 µC Gyair⁻1 cm-2 at 10 V and a detection limit of 1.44 µGyair s⁻1. This study explores 2D DJ perovskites for efficient and innovative optoelectronic applications.

Intermediate Phase Suppression with Long Chain Diammonium Alkane for High Performance Wide-Bandgap and Tandem Perovskite Solar Cells.

Wide bandgap (WBG) perovskite can construct tandem cells with narrow bandgap solar cells by adjusting the band gap to overcome the Shockley-Queisser limitation of single junction perovskite solar cells (PSCs). However, WBG perovskites still suffer from severe nonradiative carrier recombination and large open-circuit voltage loss. Here, this work uses an in situ photoluminescence (PL) measurement to monitor the intermediate phase evolution and crystallization process via blade coating. This work reports a strategy to fabricate efficient and stable WBG perovskite solar cells through doping a long carbon chain molecule octane-1,8-diamine dihydroiodide (ODADI). It is found that ODADI doping not only suppresses intermediate phases but also promote the crystallization of perovskite and passivate defects in blade coated 1.67 eV WBG FA0.7 Cs0.25 MA0.05 Pb(I0.8 Br0.2 )3 perovskite films. As a result, the champion single junction inverted PSCs deliver the efficiencies of 22.06% and 19.63% for the active area of 0.07 and 1.02 cm2 , respectively, which are the highest power conversion efficiencies (PCEs) in WBG PSCs by blade coating. The unencapsulated device demonstrates excellent stability in air, which maintains its initial efficiency at the maximum power points under constant AM 1.5G illumination in open air for nearly 500 h. The resulting semitransparent WBG device delivers a high PCE of 20.06%, and the 4-terminal all-perovskite tandem device delivers a PCE of 28.35%.

Mixed tin-lead perovskites with balanced crystallization and oxidation barrier for all-perovskite tandem solar cells.

Mixed tin-lead perovskite solar cells have driven a lot of passion for research because of their vital role in all-perovskite tandem solar cells, which hold the potential for achieving higher efficiencies compared to single-junction counterparts. However, the pronounced disparity in crystallization processes between tin-based perovskites and lead-based perovskites, coupled with the easy Sn2+ oxidation, has long been a dominant factor contributing to high defect densities. In this study, we propose a multidimensional strategy to achieve efficient tin-lead perovskite solar cells by employing a functional N-(carboxypheny)guanidine hydrochloride molecule. The tailored N-(carboxypheny)guanidine hydrochloride molecule plays a pivotal role in manipulating the crystallization and grain growth of tin-lead perovskites, while also serving as a preservative to effectively inhibit Sn2+ oxidation, owing to the strong binding between N-(carboxypheny)guanidine hydrochloride and tin (II) iodide and the elevated energy barriers for oxidation. Consequently, single-junction tin-lead cells exhibit a stabilized power conversion efficiency of 23.11% and can maintain 97.45% of their initial value even after 3500 h of shelf storage in an inert atmosphere without encapsulation. We further integrate tin-lead perovskites into two-terminal monolithic all-perovskite tandem cells, delivering a certified efficiency of 27.35%.

Regulating Crystal Orientation via Ligand Anchoring Enables Efficient Wide-Bandgap Perovskite Solar Cells and Tandems.

Wide-bandgap (WBG) perovskite solar cells have attracted considerable interest for their potential applications in tandem solar cells. However, the predominant obstacles impeding their widespread adoption are substantial open-circuit voltage (VOC ) deficit and severe photo-induced halide segregation. To tackle these challenges, a crystal orientation regulation strategy by introducing dodecyl-benzene-sulfonic-acid as an additive in perovskite precursors is proposed. This method significantly promotes the desired crystal orientation, passivates defects, and mitigates photo-induced halide phase segregation in perovskite films, leading to substantially reduced nonradiative recombination, minimized VOC deficits, and enhanced operational stability of the devices. The resulting 1.66 eV bandgap methylamine-free perovskite solar cells achieve a remarkable power conversion efficiency (PCE) of 22.40% (certified at 21.97%), with the smallest VOC deficit recorded at 0.39 V. Furthermore, the fabricated semitransparent WBG devices exhibit a competitive PCE of 20.13%. Consequently, four-terminal tandem cells comprising WBG perovskite top cells and 1.25 eV bandgap perovskite bottom cells showcase an impressive PCE of 28.06% (stabilized 27.92%), demonstrating great potential for efficient multijunction tandem solar cell applications.

Aspartate all-in-one doping strategy enables efficient all-perovskite tandems.

All-perovskite tandem solar cells hold great promise in surpassing the Shockley-Queisser limit for single-junction solar cells1-3. However, the practical use of these cells is currently hampered by the subpar performance and stability issues associated with mixed tin-lead (Sn-Pb) narrow-bandgap perovskite subcells in all-perovskite tandems4-7. In this study, we focus on the narrow-bandgap subcells and develop an all-in-one doping strategy for them. We introduce aspartate hydrochloride (AspCl) into both the bottom poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) and bulk perovskite layers, followed by another AspCl posttreatment. We show that a single AspCl additive can effectively passivate defects, reduce Sn4+ impurities and shift the Fermi energy level. Additionally, the strong molecular bonding of AspCl-Sn/Pb iodide and AspCl-AspCl can strengthen the structure and thereby improve the stability of Sn-Pb perovskites. Ultimately, the implementation of AspCl doping in Sn-Pb perovskite solar cells yielded power conversion efficiencies of 22.46% for single-junction cells and 27.84% (27.62% stabilized and 27.34% certified) for tandems with 95% retention after being stored in an N2-filled glovebox for 2,000 h. These results suggest that all-in-one AspCl doping is a favourable strategy for enhancing the efficiency and stability of single-junction Sn-Pb perovskite solar cells and their tandems.

Efficient Narrow-Bandgap Mixed Tin-Lead Perovskite Solar Cells via Natural Tin Oxide Doping.

Narrow-bandgap (NBG) mixed tin/lead-based (Sn-Pb) perovskite solar cells (PSCs) have attracted extensive attention for use in tandem solar cells. However, they are still plagued by serious carrier recombination due to inferior film properties resulting from the alloying of Sn with Pb elements, which leads to p-type self-doping behaviors. This work reports an effective tin oxide (SnOx ) doping strategy to produce high-quality Sn-Pb perovskite films for utilization in efficient single-junction and tandem PSCs. SnOx can be naturally oxidized from tin diiodide raw powders and successfully incorporated into Sn-Pb perovskite films. Consequently, Sn-Pb perovskite films doped with SnOx exhibit dramatically improved morphology, crystallization, absorption, and more interestingly, upward-shifted Fermi levels. The resulting narrow-bandgap Sn-Pb PSCs with natural SnOx doping have considerably reduced carrier recombination, therefore delivering a maximum power conversion efficiency (PCE) of 22.16% for single-junction cells and a remarkable PCE of 26.01% (with a steady-state efficiency of 25.33%) for two-terminal all-perovskite tandem cells. This work introduces a facile doping strategy for the manufacture of efficient single-junction narrow-bandgap PSCs and their tandem solar cells.

Antimony Potassium Tartrate Stabilizes Wide-Bandgap Perovskites for Inverted 4-T All-Perovskite Tandem Solar Cells with Efficiencies over 26.

Wide-bandgap (WBG) perovskites have been attracting much attention because of their immense potential as a front light-absorber for tandem solar cells. However, WBG perovskite solar cells (PSCs) generally exhibit undesired large open-circuit voltage (VOC) loss due to light-induced phase segregation and severe non-radiative recombination loss. Herein, antimony potassium tartrate (APTA) is added to perovskite precursor as a multifunctional additive that not only coordinates with unbonded lead but also inhibits the migration of halogen in perovskite, which results in suppressed non-radiative recombination, inhibited phase segregation and better band energy alignment. Therefore, a APTA auxiliary WBG PSC with a champion photoelectric conversion efficiency of 20.35% and less hysteresis is presented. They maintain 80% of their initial efficiencies under 100 mW cm-2 white light illumination in nitrogen after 1,000 h. Furthermore, by combining a semi-transparent WBG perovskite front cell with a narrow-bandgap tin-lead PSC, a perovskite/perovskite four-terminal tandem solar cell with an efficiency over 26% is achieved. Our work provides a feasible approach for the fabrication of efficient tandem solar cells.

Perovskite-like Silver Halide Single-Crystal Microbelt Enables Ultrasensitive Flexible X-ray Detectors.

Lead halide perovskite single crystals have attracted wide interest in the field of X-ray detection due to their excellent photophysical properties. However, their inherent toxicity and high thickness restrict their applications in flexible devices. In this paper, designing a micronanometer-scale X-ray detector based on all-inorganic lead-free CsAg2I3 (CAI) single crystal microbelts (MBs) has addressed the above issues. These CAI single crystal MBs can be synthesized on various substrates with high crystal quality and excellent stability. Based on their excellent characteristics of the CAI MBs, we fabricate single CAI MB devices with an Au/CAI/Au structure, which shows not only good ultraviolet photoresponse characteristics, but also excellent X-ray detection performance. The optimized CAI photodetectors exhibit a responsivity of 23.59 mA/W, a high detectivity of 1010 Jones, and a fast response speed. For X-ray detection performance, a sensitivity of up to 515.49 µC Gyair-1 cm-2 and a detection limit of as low as 14.65 µGyair s-1 are achieved with outstanding operation stability and excellent long-term stability. Furthermore, our devices also showed excellent applicability for X-ray imaging, which is promising for their use in X-ray detection and imaging. Finally, flexible X-ray detectors are fabricated by using thin CAI single-crystal MBs and demonstrate good flexibility under different bending radii and bending cycles. Our work shows the potential for developing highly sensitive flexible integrated micro/nano optoelectronic devices by using lead-free perovskite analogue single crystals.

Suppressing Phase Segregation in Wide Bandgap Perovskites for Monolithic Perovskite/Organic Tandem Solar Cells with Reduced Voltage Loss.

Wide bandgap (WBG) perovskites through tuning iodine/bromine ratios are capable of merging with narrow bandgap organic bulk heterojunctions to construct tandem solar cells to overcome the Shockley-Queisser limitation. However, WBG perovskites readily suffer from light-induced halide ion migration, leading to detrimental phase segregation and hence severe open-circuit voltage (VOC ) loss. Here, to solve this issue, lead thiocyanate (Pb(SCN)2 ) and 2-thiopheneethylammonium chloride (TEACl) are synergistically employed to passivate and stabilize WBG perovskites with 1.79 eV bandgap. It is demonstrated that the synergetic employment of Pb(SCN)2 and TEACl suppresses light-induced phase segregation, passivates WBG perovskite defects, and reduces non-radiative recombination, hence alleviating VOC loss. As a result, optimized WBG perovskite solar cells (PSCs) are obtained with an impressive VOC of 1.26 V and power conversion efficiency (PCE) over 17.0%. Furthermore, the interconnection layer is optimized to minimize the VOC loss and construct two-terminal perovskite/organic tandem solar cells with a narrow bandgap organic blend bulk heterojunction of PM6:Y6 and achieve a champion PCE of 22.29% with a high VOC of 2.072 V. In addition, these tandem solar cells maintain 81% of their initial efficiency after 1000 h continuous tracking at the maximum power point (MPP) under 100 mW cm-2 white light illumination.