Binding groups for highly ordered SAM formation: carboxylic versus thiol.

The structure of analogous SAMs chemisorbed on an Ag substrate via a -SH or -COOH binding group is reported. Our observations indicate that COOH binding groups can be considered as a promising alternative for the current standard based on the sulfur binding groups, particularly when 2D ordering, SAM fabrication time and stability under ambient conditions are of great importance.

Layer-by-layer growth of oriented metal organic polymers on a functionalized organic surface.

A metal-organic coordination polymer based on benzenetricarboxylic acid ligands and Zn(II) ions was grown on a COOH-terminated organic surface in a stepwise fashion. The deposited films were characterized using a number of surface analysis techniques, including X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. IR measurements show that the metal-organic coordination polymer grows in a layer-by-layer fashion and can be reversibly loaded with NH3. The deposition is very selective and occurs only on COOH-terminated regions of an organic surface, as demonstrated by AFM measurements.

Electrochemically deposited Pd islands on an organic surface: the presence of Coulomb blockade in STM I(V) curves at room temperature.

Palladium islands with a thickness of a few monolayers were deposited on top of a self-assembled monolayer (SAM) fabricated from 4-mercaptopyridine. In the I(V) curves obtained using the scanning tunneling microscope (STM) clearly the signature of Coulomb blockade is observed, explicitly demonstrating that these islands are coupled to the underlying gold substrate only via a tunneling barrier; this spectroscopic feature also allows to distinguish the palladium islands from similar morphological features present on the gold substrate prior to palladium deposition.

Self-assembled monolayers of semifluorinated alkaneselenolates on noble metal substrates.

Self-assembled monolayers (SAMs) formed from semifluorinated dialkyldiselenol (CF(3)(CF(2))(5)(CH(2))(2)Se-)(2) (F6H2SeSeH2F6) on polycrystalline Au(111) and Ag(111) were characterized by high-resolution X-ray photoelectron spectroscopy, infrared reflection absorption spectroscopy, near edge X-ray absorption fine structure spectroscopy, scanning tunneling microscopy, and contact angle measurements. The Se-Se linkage of F6H2SeSeH2F6 was found to be cleaved upon the adsorption, followed by the formation of selenolate-metal bond. The resulting F6H2Se SAMs are well-ordered, densely packed, and contamination-free. The packing density of these films is governed by the bulky fluorocarbon part, which exhibits the expected helical conformation. A noncommensurate hexagonal arrangement of the F6H2Se molecules with an average nearest-neighbor spacing of about 5.8 +/- 0.2 A, close to the van der Waals diameter the fluorocarbon chain, was observed on Au(111). The orientation of the fluorocarbon chains in the F6H2Se SAMs does not depend on the substrate-the average tilt angle of these moieties was estimated to be about 21-22 degrees on both Au and Ag.

Self-assembled monolayers of aromatic selenolates on noble metal substrates.

Self-assembled monolayers (SAMs) formed from bis(biphenyl-4-yl) diselenide (BBPDSe) on Au(111) and Ag(111) substrates have been characterized by high-resolution X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, infrared reflection absorption spectroscopy, water contact angle measurements, and scanning tunneling microscopy (STM). BBPDSe was found to form contamination-free, densely packed, and well-ordered biphenyl selenolate (BPSe) SAMs on both Au and Ag. Spectroscopic data suggest very similar packing density, orientational order, and molecular inclination in BPSe/Au and BPSe/Ag. STM data give a similar intermolecular spacing of 5.3 +/- 0.4 A on both Au and Ag but exhibit differences in the exact arrangement of the BPSe molecules on these two substrates, with the (2 square root[3] x square root[3])R30 degrees and (square root[3] x square root[3])R30 degrees unit cells on Au and Ag, respectively. There is strong evidence for adsorbate-mediated substrate restructuring in the case of Au, whereas no clear statement on this issue can be made in the case of Ag. The film quality of the BPSe SAMs is superior to their thiol analogues, which is presumably related to a better ability of the selenolates to adjust the surface lattice of the substrate to the most favorable 2D arrangement of the adsorbate molecules. This suggests that aromatic selenolates represent an attractive alternative to the respective thiols.

Modification and stability of aromatic self-assembled monolayers upon irradiation with energetic particles.

We have studied ion and electron irradiation of self-assembled monolayers (SAMs) of 2-(4'-methyl-biphenyl-4yl)-ethanethiol (BP2, CH3-C6H4C6H4CH2CH2-SH), phenyl mercaptan (PEM, C6H5CH2CH2-SH), and 4'-methyl-biphenyl-4-thiol (BP0, CH3-C6H4C6H4-SH) deposited on Au(111) substrates. Desorption of neutral particles from PEM/Au and BP2/Au was investigated using laser ionization in combination with mass spectrometry. The ion-induced damage of both BP2 and PEM SAMs is very efficient and interaction with a single ion leads to the modification of tens of molecules. This feature is the result of a desorption process caused by a chemical reaction initiated by an ion impact. Both for ions and electrons, experiments indicate that the possibility for scission of the Au-S bond strongly depends on the chemical nature of the SAM system. We attribute the possible origin of this effect to the orientation of the Au-S-C angle or adsorption sites of molecules. The analysis of electron-irradiated PEM/Au and BP2/Au, using ion-initiated laser probing, enabled measurements of the cross section for the electron-induced damage of the intact molecule or specific fragment. Analysis of electron-irradiated BP0/Au by using time-of-flight secondary ion mass spectrometry (TOF-SIMS) provides direct evidence for the quasi-polymerization process induced by electron irradiation.