RESUMO
Tissue-engineered vascular grafts (TEVGs) poised for regenerative applications are central to effective vascular repair, with their efficacy being significantly influenced by scaffold architecture and the strategic distribution of bioactive molecules either embedded within the scaffold or elicited from responsive tissues. Despite substantial advancements over recent decades, a thorough understanding of the critical cellular dynamics for clinical success remains to be fully elucidated. Graft failure, often ascribed to thrombogenesis, intimal hyperplasia, or calcification, is predominantly linked to improperly modulated inflammatory reactions. The orchestrated behavior of repopulating cells is crucial for both initial endothelialization and the subsequent differentiation of vascular wall stem cells into functional phenotypes. This necessitates the TEVG to provide an optimal milieu wherein immune cells can promote early angiogenesis and cell recruitment, all while averting persistent inflammation. In this study, we present an innovative TEVG designed to enhance cellular responses by integrating a physicochemical gradient through a multilayered structure utilizing synthetic (poly (ester urethane urea), PEUU) and natural polymers (Gelatin B), thereby modulating inflammatory reactions. The luminal surface is functionalized with a four-arm polyethylene glycol (P4A) to mitigate thrombogenesis, while the incorporation of adhesive peptides (RGD/SV) fosters the adhesion and maturation of functional endothelial cells. The resultant multilayered TEVG, with a diameter of 3.0 cm and a length of 11 cm, exhibits differential porosity along its layers and mechanical properties commensurate with those of native porcine carotid arteries. Analyses indicate high biocompatibility and low thrombogenicity while enabling luminal endothelialization and functional phenotypic behavior, thus limiting inflammation in in-vitro models. The vascular wall demonstrated low immunogenicity with an initial acute inflammatory phase, transitioning towards a pro-regenerative M2 macrophage-predominant phase. These findings underscore the potential of the designed TEVG in inducing favorable immunomodulatory and pro-regenerative environments, thus holding promise for future clinical applications in vascular tissue engineering.
RESUMO
Radiation therapy (RT) is essential for triple negative breast cancer (TNBC) treatment. However, patients with TNBC continue to experience recurrence after RT. The role of the extracellular matrix (ECM) of irradiated breast tissue in tumor recurrence is still unknown. In this study, we evaluated the structure, molecular composition, and mechanical properties of irradiated murine mammary fat pads (MFPs) and developed ECM hydrogels from decellularized tissues (dECM) to assess the effects of RT-induced ECM changes on breast cancer cell behavior. Irradiated MFPs were characterized by increased ECM deposition and fiber density compared to unirradiated controls, which may provide a platform for cell invasion and proliferation. ECM component changes in collagens I, IV, and VI, and fibronectin were observed following irradiation in both MFPs and dECM hydrogels. Encapsulated TNBC cell proliferation and invasive capacity was enhanced in irradiated dECM hydrogels. In addition, TNBC cells co-cultured with macrophages in irradiated dECM hydrogels induced M2 macrophage polarization and exhibited further increases in proliferation. Our study establishes that the ECM in radiation-damaged sites promotes TNBC invasion and proliferation as well as an immunosuppressive microenvironment. This work represents an important step toward elucidating how changes in the ECM after RT contribute to breast cancer recurrence.
Assuntos
Proliferação de Células , Matriz Extracelular , Hidrogéis , Neoplasias de Mama Triplo Negativas , Microambiente Tumoral , Animais , Matriz Extracelular/metabolismo , Microambiente Tumoral/efeitos da radiação , Hidrogéis/química , Feminino , Proliferação de Células/efeitos dos fármacos , Proliferação de Células/efeitos da radiação , Linhagem Celular Tumoral , Camundongos , Humanos , Neoplasias de Mama Triplo Negativas/patologia , Neoplasias de Mama Triplo Negativas/radioterapia , Macrófagos/metabolismo , Glândulas Mamárias Animais/efeitos da radiaçãoRESUMO
This article introduces an open-source tool to experimentally compare blood residence time in biomedical devices using an image-based method. The experimental setup and the postprocessing workflow are comprehensively elucidated in a detailed report that conducts a thorough comparison of the residence times of a blood analog within three distinct blood oxygenator prototypes. To enable widespread accessibility and ease of use, the user-friendly MATLAB App developed for the analysis is available on the Mathworks repository: https://www.mathworks.com/matlabcentral/fileexchange/135156 .
Assuntos
Processamento de Imagem Assistida por Computador , Humanos , Processamento de Imagem Assistida por Computador/métodos , Software , Fatores de TempoRESUMO
There is still much unknown about the fluid mechanical response to cardiac valve scaffolds, even as their implementation in the clinic is on the horizon. Specifically, while degradable polymer valve scaffolds are currently being tested in the pulmonary valve position, their material and mechanical properties have not been fully elucidated. Optimizing these properties are important determinants not only of acute function, but long-term remodeling prospects. This study aimed to characterize fluid profiles downstream of electrospun valve scaffolds under dynamic pulmonary conditions. Valve scaffold design was changed by either blending poly(carbonate urethane) urea (PCUU) with poly(ε-caprolactone) (PCL) to modulate material stiffness or by changing the geometric design of the valve scaffolds. Specifically, two designs were utilized: one modeled after a clinically used bioprosthetic valve design (termed Mk1 design), and another using a geometrically "optimized" design (termed Mk2) based on anatomical data. Particle image velocimetry results showed that material stiffness only had a mild impact on fluid mechanics, measured by velocity magnitude, vorticity, viscous shear stress, Reynolds shear stress, and turbulent kinetic energy. However, comparing the two geometric designs yielded a much greater impact, with the Mk2 valve groups containing the highest PCUU/PCL ratio demonstrating the overall best performance. This report highlights the easily manipulable design features of polymeric valve scaffolds and demonstrates their relative significance for valve function.
Assuntos
Polímeros , Valva Pulmonar , Engenharia Tecidual/métodos , Alicerces Teciduais , Valvas Cardíacas , PoliésteresRESUMO
In pursuit of a suitable scaffold material for cardiac valve tissue engineering applications, an acellular, electrospun, biodegradable polyester carbonate urethane urea (PECUU) scaffold was evaluated as a pulmonary valve leaflet replacement in vivo. In sheep (n = 8), a single pulmonary valve leaflet was replaced with a PECUU leaflet and followed for 1, 6, and 12 weeks. Implanted leaflet function was assessed in vivo by echocardiography. Explanted samples were studied for gross pathology, microscopic changes in the extracellular matrix, host cellular re-population, and immune responses, and for biomechanical properties. PECUU leaflets showed normal leaflet motion at implant, but decreased leaflet motion and dimensions at 6 weeks. The leaflets accumulated α-SMA and CD45 positive cells, with surfaces covered with endothelial cells (CD31+). New collagen formation occurred (Picrosirius Red). Accumulated tissue thickness correlated with the decrease in leaflet motion. The PECUU scaffolds had histologic evidence of scaffold degradation and an accumulation of pro-inflammatory/M1 and anti-inflammatory/M2 macrophages over time in vivo. The extent of inflammatory cell accumulation correlated with tissue formation and polymer degradation but was also associated with leaflet thickening and decreased leaflet motion. Future studies should explore pre-implant seeding of polymer scaffolds, more advanced polymer fabrication methods able to more closely approximate native tissue structure and function, and other techniques to control and balance the degradation of biomaterials and new tissue formation by modulation of the host immune response.
Assuntos
Próteses Valvulares Cardíacas , Valva Pulmonar , Animais , Ovinos , Células Endoteliais , Alicerces Teciduais/química , Materiais Biocompatíveis , Polímeros , Poliésteres , Engenharia Tecidual/métodosRESUMO
Female cancer patients who have undergone chemotherapy have an elevated risk of developing ovarian dysfunction and failure. Experimental approaches to treat iatrogenic infertility are evolving rapidly; however, challenges and risks remain that hinder clinical translation. Biomaterials have improved in vitro follicle maturation and in vivo transplantation in mice, but there has only been marginal success for early-stage human follicles. Here, we developed methods to obtain an ovarian-specific extracellular matrix hydrogel to facilitate follicle delivery and establish an in situ ovary (ISO), which offers a permissive environment to enhance follicle survival. We demonstrate sustainable follicle engraftment, natural pregnancy, and the birth of healthy pups after intraovarian microinjection of isolated exogenous follicles into chemotherapy-treated (CTx) mice. Our results confirm that hydrogel-based follicle microinjection could offer a minimally invasive delivery platform to enhance follicle integration for patients post-chemotherapy.
RESUMO
Introduction: Thrombogenesis, a major cause of implantable cardiovascular device failure, can be addressed through the use of biodegradable polymers modified with anticoagulating moieties. This study introduces a novel polyester urethane urea (PEUU) functionalized with various anti-platelet deposition molecules for enhanced antiplatelet performance in regenerative cardiovascular devices. Methods: PEUU, synthesized from poly-caprolactone, 1,4-diisocyanatobutane, and putrescine, was chemically oxidized to introduce carboxyl groups, creating PEUU-COOH. This polymer was functionalized in situ with polyethyleneimine, 4-arm polyethylene glycol, seleno-L-cystine, heparin sodium, and fondaparinux. Functionalization was confirmed using Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy. Bio-compatibility and hemocompatibility were validated through metabolic activity and hemolysis assays. The anti-thrombotic activity was assessed using platelet aggregation, lactate dehydrogenase activation assays, and scanning electron microscopy surface imaging. The whole-blood clotting time quantification assay was employed to evaluate anticoagulation properties. Results: Results demonstrated high biocompatibility and hemocompatibility, with the most potent anti-thrombotic activity observed on pegylated surfaces. However, seleno-L-cystine and fondaparinux exhibited no anti-platelet activity. Discussion: The findings highlight the importance of balancing various factors and addressing challenges associated with different approaches when developing innovative surface modifications for cardiovascular devices.
RESUMO
Development of tissue engineered scaffolds for cardiac valve replacement is nearing clinical translation. While much work has been done to characterize mechanical behavior of native and bioprosthetic valves, and incorporate those data into models improving valve design, similar work for degradable valve scaffolds is lacking. This is particularly important given the implications mechanics have on short-term survival and long-term remodeling. As such, this study aimed to characterize spatially-resolved strain profiles on the leaflets of degradable polymeric valve scaffolds, manipulating common design features such as material stiffness by blending poly(carbonate urethane)urea with stiffer polymers, and geometric configuration, modeled after either a clinically-used valve design (Mk1 design) or an anatomically "optimized" design (Mk2 design). It was shown that material stiffness plays a significant role in overall valve performance, with the stiffest valve groups showing asymmetric and incomplete opening during systole. However, the geometric configuration had a significantly greater effect on valve performance as well as strain magnitude and distribution. Major findings in the strain maps included systolic strains having overall higher strain magnitudes than diastole, and peak radial-direction strain concentrations in the base region of Mk1 valves during systole, with a significant mitigation of radial strain in Mk2 valves. The high tunability of tissue engineered scaffolds is a great advantage for valve design, and the results reported here indicate that design parameters have significant and unequal impact on valve performance and mechanics.
Assuntos
Próteses Valvulares Cardíacas , Engenharia Tecidual , Engenharia Tecidual/métodos , Valva Aórtica , Alicerces Teciduais , Polímeros , CatéteresRESUMO
Reanimating facial structures following paralysis and muscle loss is a surgical objective that would benefit from improved options for harvesting appropriately sized muscle flaps. The objective of this study is to apply electrohydrodynamic processing to generate a cellularized, elastic, biocomposite scaffold that could develop and mature as muscle in a prepared donor site in vivo, and then be transferred as a thin muscle flap with a vascular and neural pedicle. First, an effective extracellular matrix (ECM) gel type is selected for the biocomposite scaffold from three types of ECM combined with poly(ester urethane)urea microfibers and evaluated in rat abdominal wall defects. Next, two types of precursor cells (muscle-derived and adipose-derived) are compared in constructs placed in rat hind limb defects for muscle regeneration capacity. Finally, with a construct made from dermal ECM and muscle-derived stem cells, protoflaps are implanted in one hindlimb for development and then microsurgically transferred as a free flap to the contralateral limb where stimulated muscle function is confirmed. This construct generation and in vivo incubation procedure may allow the generation of small-scale muscle flaps appropriate for transfer to the face, offering a new strategy for facial reanimation.
Assuntos
Músculos , Retalhos Cirúrgicos , Ratos , Animais , Retalhos Cirúrgicos/irrigação sanguínea , Retalhos Cirúrgicos/inervação , Matriz ExtracelularRESUMO
Cholecystectomy is among the most frequent procedures in general surgery. In the healthcare facility organization, it is important to evaluate all interventions and procedures that have a great impact on health management and that have a clear effect on the Length of Stay (LOS). The LOS represents, in fact, an indicator of performance and measure the goodness of a health process. This study was conducted with the aim of providing LOS for all patients undergoing cholecystectomy at the "A.O.R.N. A. Cardarelli" of Naples. Data were collected in the two years 2019 and 2020 and included 650 patients. A MLR model is created in the work to predict the value of LOS as a function of the following variables: gender, age, pre-operative LOS, presence of comorbidities and complication during surgery. The results obtained are as follows: R=0.941 and R2=0.885.
Assuntos
Colecistectomia , Prática de Grupo , Humanos , Tempo de Internação , Instalações de SaúdeRESUMO
The prolonged length of stay is an important aspect to be considered for the healthcare management since this affect both the health-related expenditure of the hospital and the quality of the offered service. In the light of these consideration is important for hospitals to be able to predict the LOS of patients and to work on the principal aspect affecting it in order to reduce LOS as much as possible. In this work we focus on patients undergoing mastectomy. The data were collected form 989 patients who underwent mastectomy surgery in the Surgery Department of the AORN "A. Cardarelli" of Naples. Different models have been tested and characterized and the one with the best performance was identified.
Assuntos
Neoplasias da Mama , Mastectomia , Humanos , Feminino , Tempo de Internação , Neoplasias da Mama/cirurgia , Gastos em Saúde , HospitaisRESUMO
The aim of this study was to investigate whether exposure to the pandemic was associated with increased in-hospital mortality for health failure. We collected data from patients hospitalized between 2019 and 2020 and we assessed the likelihood of in-hospital death. Although the positive association of exposure to the COVID period with an increased in-hospital mortality is not statistically significant, this may underscore other factors that may influence mortality. Our study was designed to contribute to a better understanding of the impact of the pandemic on in-hospital mortality and to identify potential areas for intervention in patient care.
Assuntos
COVID-19 , Insuficiência Cardíaca , Humanos , Mortalidade Hospitalar , Pandemias , PacientesRESUMO
MaestraNatura (MN) is a nutrition education program developed to both enhance awareness about the importance of healthy eating behaviour and skills on food and nutrition in primary school students. The level of knowledge about food and nutritional issues was assessed by a questionnaire administered to 256 students (9-10 years old) attending the last class of primary school and was compared with that of a control group of 98 students frequenting the same schools that received traditional nutrition education based on curricular science lessons and one frontal lesson conducted by an expert nutritionist. The results indicated that students in the MN program showed a higher percentage of correct responses to the questionnaire when compared with the control group (76 ± 15.4 vs. 59 ± 17.7; p < 0.001). Furthermore, the students attending the MN program were requested to organise a weekly menu before (T0) and when finished (T1) the MN program. The results evidenced an overall significant improvement in the score obtained at T1 with respect to those at T0 (p < 0.001), indicating a strong improvement in the ability to translate the theoretical concepts of nutrition guidelines in practice. In addition, the analysis revealed a gender gap between boys and girls, with boys showing a worse score at T0 that was ameliorated after the completion of the program (p < 0.001). Overall, MN program is effective in improving nutrition knowledge amongst 9-10-year-old students. Furthermore, students showed an increased ability to organise a weekly dietary plan after completing the MN program, a result which also bridged gender gaps. Thus, preventive nutrition education strategies specifically addressed to boys and girls, and involving both the school and family, are needed to make children aware of the importance of a healthy lifestyle and to correct inadequate eating habits.
Assuntos
Comportamento Alimentar , Educação em Saúde , Masculino , Criança , Feminino , Humanos , Dieta , Estado Nutricional , Instituições Acadêmicas , Conhecimentos, Atitudes e Prática em SaúdeRESUMO
Promoting a healthy diet, mainly in youths, is the most effective action to prevent and fight dietary excesses and nutritional imbalance in the population. MaestraNatura (MN) is an innovative nutritional education program aimed at promoting a healthy lifestyle in first-level secondary school students. The study evaluated the effectiveness of the MN program in improving knowledge in students following the MN program (MN group) with respect to a control group (CO group) undergoing a "traditional" nutritional education path. To this end, the nutrition knowledge of the two groups was assessed by three multi-choice questionnaires. The results showed a significant improvement in knowledge (p < 0.001) in the MN group with respect to the CO group for all the questionnaires. Furthermore, the students' ability to transfer the principles of nutrition guidelines to the real context of daily meals was determined by asking the MN group to create a weekly food plan before (T0) and after (T1) the completion of the MN program. The MN group demonstrated improved performance in organizing the weekly menu plan at T1 with respect to T0 (p = 0.005). In conclusion, the MN nutritional education program appears to be an effective tool for improving knowledge and skills on nutritional issues, especially in those students with a lower starting level of knowledge and ability.
Assuntos
Educação em Saúde , Política Nutricional , Adolescente , Dieta Saudável , Alimentos , Educação em Saúde/métodos , Humanos , EstudantesRESUMO
Suture materials are the most common bioimplants in surgical and clinical practice, playing a crucial role in wound healing and tendon and ligament repair. Despite the assortment available on the market, sutures are still affected by significant disadvantages, including failure in mimicking the mechanical properties of the tissue, excessive fibrosis, and inflammation. This study introduces a mandrel-less electrodeposition apparatus to fabricate continuous microfiber wires of indefinite length. The mandrel-less biofabrication produces wires, potentially used as medical fibers, with different microfiber bundles, that imitate the hierarchical organization of native tissues, and tailored mechanical properties. Microfiber wire morphology and mechanical properties are characterized by scanning electron microscopy, digital image processing, and uniaxial tensile test. Wires are tested in vitro on monocyte/macrophage stimulation and in vivo on a rat surgical wound model. The wires produced by mandrel-less deposition show an increased M2 macrophage phenotype in vitro. The in vivo assessment demonstrates that microfiber wires, compared to the medical fibers currently used, reduce pro-inflammatory macrophage response and preserve their mechanical properties after 30 days of use. These results make this microfiber wire an ideal candidate as a suture material for soft tissue surgery, suggesting a crucial role of microarchitecture in more favorable host response.
Assuntos
Suturas , Engenharia Tecidual , Animais , Ratos , Tendões , Resistência à Tração , Engenharia Tecidual/métodos , CicatrizaçãoRESUMO
Effective cardiovascular tissue surrogates require high control of scaffold structural and mechanical features to match native tissue properties, which are dependent on tissue-specific mechanics, function heterogenicity, and morphology. Bridging scaffold processing variables with native tissue properties is recognized as a priority for advancing biomechanical performance of biomedical materials and, when translated to the clinical practice, their efficacy. Accordingly, this study selected electrospinning on a rotating cylindrical target as an apparatus of broad application and mapped the relationship between key processing variables and scaffold mechanics and structure. This information was combined with mechanical anisotropy ranges of interest for the three main categories of tissue surrogated in cardiovascular tissue engineering: heart valve leaflets, ventricle wall, and large diameter blood vessels. Specifically, three processing variables have been considered: the rotational velocity and the rastering velocity of the mandrel and the dry (single nozzle - polymer only) vs wet (double nozzle - polymer plus phosphate buffer saline solution) fabrication configuration. While the dry configuration is generally utilized to obtain micro-fiber based polymeric mats, the wet fabrication is representative of processing conditions utilized to incorporate cells, growth factors, or micro-particles within the fibrous scaffold matrix. Dry and wet processed electrospun mats were fabricated with tangential and rastering velocities within the 0.3-9.0 m/s and 0.16-8 cm/s range respectively. Biaxial mechanics, fiber network, and pore micro-architectures were measured for each combination of velocities and for each fabrication modality (dry and wet). Results allowed identification of the precise combination of rotational and rastering velocities, for both dry and wet conditions, that is able to recapitulate the native cardiovascular tissue anisotropy ratio. By adopting a simple and broadly utilized electrospinning layout, this study is meant to provide a repeatable and easy to access methodology to improve biomimicry of the in plane-mechanics of heart valve leaflets, ventricular wall, and large diameter blood vessels.
Assuntos
Sistema Cardiovascular , Poliuretanos , Materiais Biocompatíveis/química , Poliésteres/química , Poliuretanos/química , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
OBJECTIVES: Although adipose-derived stem cells (ADSCs) have shown promise in cardiac regeneration, stable engraftment is still challenging. Acellular bioengineered cardiac patches have shown promise in positively altering ventricular remodeling in ischemic cardiomyopathy. We hypothesized that combining an ADSC sheet approach with a bioengineered patch would enhance ADSC engraftment and positively promote cardiac function compared with either therapy alone in a rat ischemic cardiomyopathy model. METHODS: Cardiac patches were generated from poly(ester carbonate urethane) urea and porcine decellularized cardiac extracellular matrix. ADSCs constitutively expressing green fluorescent protein were established from F344 rats and transplanted as a cell sheet over the left ventricle 3 days after left anterior descending artery ligation with or without an overlying cardiac patch. Cardiac function was serially evaluated using echocardiography for 8 weeks, comparing groups with combined cells and patch (group C, n = 9), ADSCs alone (group A, n = 7), patch alone (group P, n = 6) or sham groups (n = 7). RESULTS: Much greater numbers of ADSCs survived in the C versus A groups (P < .01). At 8 weeks posttransplant, the percentage fibrotic area was lower (P < .01) in groups C and P compared with the other groups and vasculature in the peri-infarct zone was greater in group C versus other groups (P < .01), and hepatocyte growth factor expression was higher in group C than in other groups (P < .05). Left ventricular ejection fraction was higher in group C versus other groups. CONCLUSIONS: A biodegradable cardiac patch enhanced ADSC engraftment, which was associated with greater cardiac function and neovascularization in the peri-infarct zone following subacute myocardial infarction.
Assuntos
Implantes Absorvíveis , Adipócitos/citologia , Matriz Extracelular Descelularizada , Infarto do Miocárdio/cirurgia , Transplante de Células-Tronco , Animais , Sobrevivência Celular , Modelos Animais de Doenças , Ventrículos do Coração/metabolismo , Fator de Crescimento de Hepatócito/metabolismo , Neovascularização Fisiológica , Ratos Endogâmicos F344 , Volume SistólicoRESUMO
A biohybrid patch without cellular components was implanted over large infarcted areas in severely dilated hearts. Nonpatched animals were assigned to control or losartan therapy. Patch-implanted animals responded with better morphological and functional echocardiographic endpoints, which were more evident in a subgroup of animals with very low pre-treatment ejection fraction (<35%). Patched animals also had smaller infarcts than both nonpatched groups. This simple approach could hold promise for clinical translation and be applied using minimally invasive procedures over the epicardium in a large set of patients to induce better ventricular remodeling, especially among those who are especially frail.
RESUMO
MaestraNatura is an innovative nutrition education program aimed at both enhancing awareness about the importance of a healthy food-lifestyle relationship and the ability to transfer the theoretical principles of nutrition guidelines to everyday life. The educational contents of the program resulted from the analysis of the answers to a questionnaire submitted to students aged 6-13 in order to assess their degree of knowledge about nutritional facts. Educational paths were specifically designed and implemented to address the main knowledge gaps identified through the analysis of the answers and were then tested for teachers' satisfaction in a sample of 56 schools in the north, centre, and south of Italy, involving 790 classes, 600 teachers, and 15,800 students. The results showed an approval rating from teachers from 90% to 94%. Said paths were designed for primary (6-10 years old) and first-level secondary (11-13 years old) school students. In addition, in a pilot study carried out in nine Educational Institutes located in an area close to Rome (Lazio region), a specific path was tested for effectiveness in increasing students' knowledge about fruit and vegetables by conducting questionnaires before (T0) and after (T1) the didactic activities. Results showed a significant increase in right answers at T1 with respect to T0 (z = 2.142, p = 0.032). Fisher's exact probability test showed an answer variability depending on the issue considered. In conclusion, this work could be considered as a first necessary step toward the definition of new educational program, aimed at increasing food literacy and favouring a healthier relationship with food, applicable in a widespread and effective manner, also outside of Italy.
Assuntos
Dieta Saudável/psicologia , Letramento em Saúde/métodos , Promoção da Saúde/métodos , Serviços de Saúde Escolar , Estudantes/psicologia , Adolescente , Criança , Dieta Saudável/normas , Feminino , Conhecimentos, Atitudes e Prática em Saúde , Humanos , Itália , Masculino , Política Nutricional , Projetos Piloto , Avaliação de Programas e Projetos de Saúde , Instituições Acadêmicas , Inquéritos e QuestionáriosRESUMO
Vascular tissue engineering is a field of regenerative medicine that restores tissue function to defective sections of the vascular network by bypass or replacement with a tubular, engineered graft. The tissue engineered vascular graft (TEVG) is comprised of a biodegradable scaffold, often combined with cells to prevent acute thrombosis and initiate scaffold remodeling. Cells are most effectively incorporated into scaffolds using bulk seeding techniques. While our group has been successful in uniform, rapid, bulk cell seeding of scaffolds for TEVG testing in small animals using our well-validated rotational vacuum technology, this approach was not directly translatable to large scaffolds, such as those required for large animal testing or human implants. The objective of this study was to develop and validate a semi-automated cell seeding device that allows for uniform, rapid, bulk seeding of large scaffolds for the fabrication of TEVGs appropriately sized for testing in large animals and eventual translation to humans. Validation of our device revealed successful seeding of cells throughout the length of our tubular scaffolds with homogenous longitudinal and circumferential cell distribution. To demonstrate the utility of this device, we implanted a cell seeded scaffold as a carotid interposition graft in a sheep model for 10 weeks. Graft remodeling was demonstrated upon explant analysis using histological staining and mechanical characterization. We conclude from this work that our semi-automated, rotational vacuum seeding device can successfully seed porous tubular scaffolds suitable for implantation in large animals and provides a platform that can be readily adapted for eventual human use.