Berberine-styrene-co-maleic acid nanomicelles: unlocking opportunities for the treatment and prevention of bacterial infections.

The global spread of multi-drug-resistant (MDR) bacteria is rapidly increasing due to antibiotic overuse, posing a major public health threat and causing millions of deaths annually. The present study explored the potential of nanocarriers for delivering novel and alternative antibacterial agents using nanotechnology-based approaches to address the challenge of MDR bacteria. The purpose was to enhance the solubility, stability, and targeted delivery of berberine (BER) and its synthetic derivative NR16 using Styrene-co-Maleic Acid (SMA) nanoparticles. Characterization of the nanoparticles, including dynamic light scattering (DLS) analysis, TEM, and UV/Vis absorption spectroscopy, confirmed their suitability and high stability for passive drug delivery. Antibacterial and antifungal activities were evaluated against a panel of pathogens, revealing significant inhibitory effects on Gram-positive strains; particularly BER, SMA-BER, and NR16 were active against MRSA, MSSA, VR, and VS E. faecalis, and S. epidermidis. Additionally, SMA-BER and SMA-NR16 showed promising activity against biofilm formation of S. epidermidis; while the two free drugs contributed to S. epidermidis biofilm disruption activity. Hemolysis tests and in vitro studies on human embryonic kidney cells (HEK-293) confirmed the safety profiles of the nanoparticles and free drugs. Overall, this research highlighted the potential of nanotechnology in developing effective antibacterial agents with reduced toxicity, addressing the growing threat of MDR bacterial infections.

Modulation of IFN-γ induced macrophage inflammatory responses via indomethacin-loaded NLCs for OA management.

Macrophages are the main cells present in the synovial membrane. They play an important role in the development and progression of osteoarthritis (OA). After the establishment of the disease macrophages mostly adopt a pro-inflammatory secretory phenotype (OA phenotype) further inducing cartilage degradation. Indomethacin (IND) is a non-steroidal anti-inflammatory drug (NSAID) able to inhibit the synthesis of prostaglandins mediated by both cyclooxygenase isoforms depicting a potent anti-inflammatory capacity. However, the lack of specificity and short half-like of free drugs within the joint cavity limits its utility in controlling inflammation after intra-articular administration. This study aims at developing IND loaded glycosylated nanostructured lipid carriers (NLCs) to selectively target macrophages and promote their reprogramming to an anti-inflammatory phenotype. This approach focused on the local administration of the NLCs, offers a promising therapeutic strategy for treating OA by modulating the inflammatory environment within the joint. NLCs will be designed by combining experimental and in silico docking analyses, and thoroughly characterized to obtain drug delivery systems with high stability and suitable physicochemical properties. The proposed mannose-functionalized systems exhibited adequate particle sizes (≈ 70 nm) and positive surface charges (> 20 mV) to be efficiently retained in the joint cavity. Moreover, the developed NLCs demonstrated effective and specific uptake by OA-like macrophages leading to a significant decrease in the secretion of the pro-inflammatory cytokines IL-6, IL-8 and TNF-α similarly to the free drug. Therefore, these systems effectively reprogrammed OA-associated macrophages to adopt a more regenerative phenotype, offering a promising strategy for managing inflammation in OA.

Harnessing extracellular vesicle membrane for gene therapy: EVs-biomimetic nanoparticles.

One of the main concerns in oligonucleotide-based therapeutics is achieving a successful cell targeting while avoiding drug degradation and clearance. Nanoparticulated drug delivery systems have emerged as a way of overcoming these issues. Among them, membrane-coated nanoparticles are of increasing relevance mainly due to their enhanced cellular uptake, immune evasion and biocompatibility. In this study, we designed and elaborated a simple and highly tuneable biomimetic drug delivery nanosystem based on a polymeric core surrounded by extracellular vesicles (EVs)-derived membranes. This strategy should allow the nanosystems to benefit from the properties conferred by the membrane proteins present in EVs membrane, key paracrine mediators. The developed systems were able to successfully encapsulate the required oligonucleotides. Also, their characterisation through already well standardised methods (dynamic light scattering, transmission electron microscopy and nanoparticle tracking analysis) and by fluorescence cross-correlation spectroscopy (FCCS) showed the desired core-shell structure. The cellular uptake using different cell types further confirmed the coating though an enhancement in cell internalisation of the developed biomimetic nanoparticles. This study brings up new possibilities for GapmeR delivery as it might be a base for the development of new delivery systems for gene therapy.

Engineering mannose-functionalized nanostructured lipid carriers by sequential design using hybrid artificial intelligence tools.

Nanostructured lipid carriers (NLCs) hold significant promise as drug delivery systems (DDS) owing to their small size and efficient drug-loading capabilities. Surface functionalization of NLCs can facilitate interaction with specific cell receptors, enabling targeted cell delivery. Mannosylation has emerged as a valuable tool for increasing the ability of nanoparticles to be recognized and internalized by macrophages. Nevertheless, the design and development of functionalized NLC is a complex task that entails the optimization of numerous variables and steps, making the process challenging and time-consuming. Moreover, no previous studies have been focused on evaluating the functionalization efficiency. In this work, hybrid Artificial Intelligence technologies are used to help in the design of mannosylated drug loaded NLCs. Artificial neural networks combined with fuzzy logic or genetic algorithms were employed to understand the particle formation processes and optimize the combinations of variables for the different steps in the functionalization process. Mannose was chemically modified to allow, for the first time, functionalization efficiency quantification and optimization. The proposed sequential methodology has enabled the design of a robust procedure for obtaining stable mannosylated NLCs with a uniform particle size distribution, small particle size (< 100 nm), and a substantial positive zeta potential (> 20mV). The incorporation of mannose on the surfaces of these DDS following the established protocols achieved > 85% of functionalization efficiency. This high effectiveness should enhance NLC recognition and internalization by macrophages, thereby facilitating the treatment of chronic inflammatory diseases.

Fighting antibiotic resistance in the local management of bovine mastitis.

Bovine mastitis is a widespread infectious disease with a significant economic burden, accounting for 80 % of the antibiotic usage in dairy animals. In recent years, extensive research has focused on using biomimetic approaches such as probiotics, bacteriocins, bacteriophages, or phytochemicals as potential alternatives to antibiotics. The local administration of therapeutic molecules through the intramammary route is one of the most commonly strategies to manage bovine mastitis. This review highlights the most important findings in this field and discusses their local application in mastitis therapy. In contrast to antibiotics, the proposed alternatives are not limited to promote bacterial death but consider other factors associated to the host microenvironments. To this end, the proposed biomimetic strategies can modulate different stages of infection by modifying the local microbiota, preventing oxidative stress, reducing bacterial adhesion to epithelial cells, modulating the immune response, or mediating the inflammatory process. Numerous in vitro studies support the antimicrobial, antibiofilm or antioxidant properties of these alternatives. However, in vivo studies incorporating these components within pharmaceutical formulations with potential clinical application are limited. The development of secure, stable, and effective drug delivery systems based on the proposed options is necessary to achieve real alternatives to antibiotics in the clinic.

Vancomycin-Loaded 3D-Printed Polylactic Acid-Hydroxyapatite Scaffolds for Bone Tissue Engineering.

The regeneration of bone remains one of the main challenges in the biomedical field, with the need to provide more personalized and multifunctional solutions. The other persistent challenge is related to the local prevention of infections after implantation surgery. To fulfill the first one and provide customized scaffolds with complex geometries, 3D printing is being investigated, with polylactic acid (PLA) as the biomaterial mostly used, given its thermoplastic properties. The 3D printing of PLA in combination with hydroxyapatite (HA) is also under research, to mimic the native mechanical and biological properties, providing more functional scaffolds. Finally, to fulfill the second one, antibacterial drugs locally incorporated into biodegradable scaffolds are also under investigation. This work aims to develop vancomycin-loaded 3D-printed PLA-HA scaffolds offering a dual functionality: local prevention of infections and personalized biodegradable scaffolds with osseointegrative properties. For this, the antibacterial drug vancomycin was incorporated into 3D-printed PLA-HA scaffolds using three loading methodologies: (1) dip coating, (2) drop coating, and (3) direct incorporation in the 3D printing with PLA and HA. A systematic characterization was performed, including release kinetics, Staphylococcus aureus antibacterial/antibiofilm activities and cytocompatibility. The results demonstrated the feasibility of the vancomycin-loaded 3D-printed PLA-HA scaffolds as drug-releasing vehicles with significant antibacterial effects for the three methodologies. In relation to the drug release kinetics, the (1) dip- and (2) drop-coating methodologies achieved burst release (first 60 min) of around 80-90% of the loaded vancomycin, followed by a slower release of the remaining drug for up to 48 h, while the (3) 3D printing presented an extended release beyond 7 days as the polymer degraded. The cytocompatibility of the vancomycin-loaded scaffolds was also confirmed.

Rationalized design to explore the full potential of PLGA microspheres as drug delivery systems.

Polymeric microparticles are widely used as drug delivery platforms either alone or embedded in more complex structures for regenerative medicine. Emulsion-solvent evaporation is the most extensively used technique for microparticles preparation. Despite the apparent simplicity of this method, there is no general procedure for producing microparticles of predictable characteristics (particle size, size distribution, encapsulation efficiency, and drug loading). Hybrid systems such as neurofuzzy logic allow identifying relationships between inputs and outputs, expressing the generated mathematical models through rules in linguistic format. In this work, the relationships between the variables involved in the emulsion-solvent evaporation process and the quality parameters of PLGA microparticles as drug delivery systems were established. Neurofuzzy logic software was able to generate models of high predictability (> 85%) for the microspheres properties namely particle size, size distribution, encapsulation efficiency and drug loading. Moreover, the generated sets of IF-THEN rules allowed to dictate general guidelines to better select the PLGA microparticles formulation parameters. This approach would be of great interest as a starting point to set-up protocols for the development of PLGA microparticles obtained by emulsion-solvent evaporation for many applications.

Modulating osteoclasts with nanoparticles: A path for osteoporosis management?

Osteoclasts are the cells responsible for the bone resorption process during bone remodeling. In a healthy situation, this process results from an equilibrium between new matrix formation by osteoblast and matrix resorption by osteoclast. Osteoporosis (OP) is a systemic bone disease characterized by a decreased bone mass density and alterations in bone microarchitecture, increasing fracture predisposition. Despite the variety of available therapies for OP management there is a growing gap in its treatment associated to the low patients' adherence owing to concerns related with long-term efficacy or safety. This makes the development of new and safe treatments necessary. Among the newly developed strategies, the use of synthetic and natural nanoparticles to modulate osteoclasts differentiation, activity, apoptosis or crosstalk with osteoblasts have arisen. Synthetic nanoparticles exert their therapeutic effect either by loading antiresorptive drugs or including molecules for osteoclasts gene regulation. Moreover, this control over osteoclasts can be improved by their targeting to bone extracellular matrix or osteoclast membranes. Furthermore, natural nanoparticles, also known as extracellular vesicles, have been identified to play a key role in bone homeostasis. Consequently, these systems have been widely studied to control osteoblasts and osteoclasts under variable environments. Additionally, the ability to bioengineer extracellular vesicles has allowed to obtain biomimetic systems with desirable characteristics as drug carriers for osteoclasts. The analyzed information reveals the possibility of modulating osteoclasts by different mechanisms through nanoparticles decreasing bone resorption. These findings suggest that controlling osteoclast activity using nanoparticles has the potential to improve osteoporosis management. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Nanoparticle-mediated selective Sfrp-1 silencing enhances bone density in osteoporotic mice.

Osteoporosis (OP) is characterized by a loss in bone mass and mineral density. The stimulation of the canonical Wnt/ß-catenin pathway has been reported to promote bone formation, this pathway is controlled by several regulators as secreted frizzled-related protein-1 (Sfrp-1), antagonist of the pathway. Thus, Sfrp-1 silencing therapies could be suitable for enhancing bone growth. However, the systemic stimulation of Wnt/ß-catenin has been correlated with side effects. This work hypothesizes the administration of lipid-polymer NPs (LPNPs) functionalized with a MSC specific aptamer (Apt) and carrying a SFRP1 silencing GapmeR, could favor bone formation in OP with minimal undesired effects. Suitable SFRP1 GapmeR-loaded Apt-LPNPs (Apt-LPNPs-SFRP1) were administered in osteoporotic mice and their biodistribution, toxicity and bone induction capacity were evaluated. The aptamer functionalization of the NPs modified their biodistribution profile showing a four-fold increase in the bone accumulation and a ten-fold decrease in the hepatic accumulation compared to naked LPNPs. Moreover, the histological evaluation revealed evident changes in bone structure observing a more compact trabecular bone and a cortical bone thickness increase in the Apt-LPNPs-SFRP1 treated mice with no toxic effects. Therefore, these LPNPs showed suitable properties and biodistribution profiles leading to an enhancement on the bone density of osteoporotic mice.

New local ganirelix sustained release therapy for uterine leiomyoma. Evaluation in a preclinical organ model.

Currently, there is a limited number of treatment options available for patients with symptomatic leiomyomas, and surgical removal is by far the most frequent procedure. Previous studies found that GnRH agonists and antagonists acting through GnRH receptors led to cell death and decreased extracellular synthesis in cultured leiomyoma cells. In this study, we encapsulated the GnRH antagonist ganirelix in PLGA microspheres contained in an alginate scaffold that also supports a leiomyoma ex vivo tissue explant. Microspheres maintained ganirelix concentration stably during six days of culture, inducing significant cell death in 50-55% of tumor cells. Although no changes were observed in the expression of extracellular matrix genes, a decreased expression of the Nuclear Factor of Activated T cells 5, a transcription factor involved in osmotic stress and tumor size. Interestingly, all tumors analyzed experienced apoptosis independently of the original driver mutation. These data indicate that local therapy of ganirelix would induce tumor reduction in a wide range of uterine leiomyomas.

Pitavastatin loaded nanoparticles: A suitable ophthalmic treatment for Acanthamoeba Keratitis inducing cell death and autophagy in Acanthamoeba polyphaga.

Statins are effective sterol lowering agents with high amoebicidal activity. Nevertheless, due to their poor aqueous solubility, they remain underused especially in eye drop formulation. The aim of the present study is to develop Pitavastatin loaded nanoparticles suitable for ophthalmic administration and designed for the management of Acanthamoeba Keratitis. These nanocarriers are aimed to solve both the ophthalmic route-associated problems and the limited aqueous drug solubility issues of Pitavastatin. Nanoparticles were obtained by a nanoprecipitation-solvent displacement method and their amoebicidal activity was evaluated against four strains of Acanthamoeba: A. castellanii Neff, A. polyphaga, A. griffini and A. quina. In Acanthamoeba polyphaga, the effect of the present nanoparticles was investigated with respect to the microtubule distribution and several programmed cell death features. Nanoparticles were able to eliminate all the tested strains and Acanthamoeba polyphaga was determined to be the most resistance strain. Nanoparticles induced chromatin condensation, autophagic vacuoles and mitochondria dysfunction.

Screening strategies for surface modification of lipid-polymer hybrid nanoparticles.

Lipid-polymer hybrid nanoparticles are promising platforms in the field of targeted drug delivery, integrating the positive features of polymeric and lipid nanocarriers. However, the use of bulk procedures in lipid-polymer hybrid nanoparticles formulation is hindering their large-scale manufacturing. Therefore, the aim of this study is to explore the suitability of alternative formulation methods, such as microfluidics, to obtain surface-tunable nanoparticles displaying suitable characteristics. Formulations were prepared by single-step nanoprecipitation or using a micromixer chip. The nanocarriers were then surface-modified with an aptamer and an antibody, two common nanoparticle vectorization strategies, developing an optimized functionalization protocol. Both naked and surface-modified nanoparticles were characterized in terms of size, polydispersity, zeta potential and morphology. Moreover, the aptamer/antibody association efficiency was also determined. Nano-sized monodisperse nanoparticles, exhibiting a spherical core-shell structure, were obtained through both procedures. Furthermore, all the nanocarriers were successfully functionalized, showing association efficiency values above 70%. Interestingly, microfluidic-based nanoparticles displayed a smaller size and a more positive zeta potential than those prepared by single-step nanoprecipitation. Outcomes suggest both techniques led to lipid-polymer hybrid nanoparticles displaying a similar functionalization efficiency. Conversely, the microfluidic approach provided an improved control over critical parameters, as particle size or charge, constituting an interesting alternative to traditional formulation procedures.

Sublingual Boosting with a Novel Mucoadhesive Thermogelling Hydrogel Following Parenteral CAF01 Priming as a Strategy Against Chlamydia trachomatis.

Chlamydia trachomatis is the most prevalent sexually transmitted disease of bacterial origin. The high number of asymptomatic cases makes it difficult to stop the transmission, requiring vaccine development. Herein, a strategy is proposed to obtain local genital tract immunity against C. trachomatis through parenteral prime and sublingual boost. Subcutaneous administration of chlamydia CTH522 subunit vaccine loaded in the adjuvant CAF01 is combined with sublingual administration of CTH522 loaded in a novel thermosensitive and mucoadhesive hydrogel. Briefly, a ternary optimized hydrogel (OGEL) with desirable biological and physicochemical properties is obtained using artificial intelligence techniques. This formulation exhibits a high gel strength and a strong mucoadhesive, adhesive and cohesive nature. The thermosensitive properties of the hydrogel facilitate application under the tongue. Meanwhile the fast gelation at body temperature together with rapid antigen release should avoid CTH522 leakage by swallowing and increase the contact with sublingual tissue, thus promoting absorption. In vivo studies demonstrate that parenteral-sublingual prime-boost immunization, using CAF01 and OGEL as CTH522 vaccine carriers, shows a tendency to increase cellular (Th1/Th17) immune responses when compared to mucosal or parenteral vaccination alone. Furthermore, parenteral prime with CAF01/CTH522 followed by sublingual boosting with OGEL/CTH522 elicits a local IgA response in the genital tract.

A Traffic Light System to Maximize Carbohydrate Cryoprotectants' Effectivity in Nanostructured Lipid Carriers' Lyophilization.

Lyophilization is often employed to transform nanoparticle suspensions to stable solid forms. This work proposed Neurofuzzy Logic (NFL) to better understand the lyophilization process of Nanostructured Lipid Carriers' (NLCs) dispersions and the carbohydrate cryoprotectants' (CPs) performance in these processes. NLCs were produced by hot homogenization, frozen at different speeds, and lyophilized using several CPs at variable concentrations. NLCs were characterized, and results were expressed as increase in particle size (Δ size), polydispersity (Δ PdI), and zeta potential (Δ ZP) of lyophilized powders (LP) regarding initial dispersions. CPs were classified according to their molecular weights (MW), and the osmolarities (Π) of CPs solutions were also determined. Databases obtained were finally modelled through FormRules® (Intelligensys Ltd., Kirkwall, Scotland, UK), an NFL software. NFL models revealed that CPs' MW determines the optimal freezing conditions and CPs' proportions. The knowledge generated allowed the establishment of a traffic light system intended to successfully select and apply sugars for nanoparticles lyophilization.

Targeting joint inflammation for osteoarthritis management through stimulus-sensitive hyaluronic acid based intra-articular hydrogels.

Numerous therapeutic strategies have been developed for osteoarthritis (OA) management, including intra-articular (IA) injections. The ideal IA formulation should control cartilage degradation and restore synovial fluid viscosity. To this end, we propose to combine thermo-sensitive polymers (poloxamers) with hyaluronic acid (HA) to develop suitable beta-lapachone (ßLap) loaded IA formulations. The development of IA formulations with these components entails several difficulties: low ßLap solubility, unknown ßLap therapeutic dose and the bonded commitment of easy administration and viscosupplementation. An optimized formulation was designed using artificial intelligence tools based on the experimental results of a wide variety of hydrogels and its therapeutic capacity was evaluated on an ex vivo OA model. The formulation presented excellent rheological properties and significantly decreased the secretion of degradative (MMP13) and pro-inflammatory (CXCL8) molecules. Therefore, the developed formulation is a promising candidate for OA treatment restoring the synovial fluid rheological properties while decreasing inflammation and cartilage degradation.

Tailored Hydrogels as Delivery Platforms for Conditioned Medium from Mesenchymal Stem Cells in a Model of Acute Colitis in Mice.

Inflammatory bowel disease (IBD), including Crohn's disease (CD) and ulcerative colitis (UC), is increasingly prevalent and current therapies are not completely effective. Mesenchymal stem cells are emerging as a promising therapeutic option. Here, the effect of local hydrogel application loaded with conditioned medium (CM) from human uterine cervical stem cells (hUCESC-CM) in an experimental acute colitis mice model has been evaluated. Colitis induction was carried out in C57BL/6 mice by dissolving dextran sulfate sodium (DSS) in drinking water for nine days. Ulcers were treated by rectal administration of either mesalazine (as positive control) or a mucoadhesive and thermosensitive hydrogel loaded with hUCESC-CM (H-hUCESC-CM). Body weight changes, colon length, and histopathological analysis were evaluated. In addition, pro-inflammatory TNF-α, IL-6, and IFN-γ mRNA levels were measured by qPCR. Treatment with H-hUCESC-CM inhibited body weight loss and colon shortening and induced a significant decrease in colon mucosa degeneration, as well as TNF-α, IFN-γ, and IL-6 mRNA levels. Results indicate that H-hUCESC-CM effectively alleviated DSS-induced colitis in mice, suggesting that H-hUCESC-CM may represent an attractive cell-free therapy for local treatment of IBD.

The Bone Regeneration Capacity of BMP-2 + MMP-10 Loaded Scaffolds Depends on the Tissue Status.

Biomaterials-mediated bone formation in osteoporosis (OP) is challenging as it requires tissue growth promotion and adequate mineralization. Based on our previous findings, the development of scaffolds combining bone morphogenetic protein 2 (BMP-2) and matrix metalloproteinase 10 (MMP-10) shows promise for OP management. To test our hypothesis, scaffolds containing BMP-2 + MMP-10 at variable ratios or BMP-2 + Alendronate (ALD) were prepared. Systems were characterized and tested in vitro on healthy and OP mesenchymal stem cells and in vivo bone formation was studied on healthy and OP animals. Therapeutic molecules were efficiently encapsulated into PLGA microspheres and embedded into chitosan foams. The use of PLGA (poly(lactic-co-glycolic acid)) microspheres as therapeutic molecule reservoirs allowed them to achieve an in vitro and in vivo controlled release. A beneficial effect on the alkaline phosphatase activity of non-OP cells was observed for both combinations when compared with BMP-2 alone. This effect was not detected on OP cells where all treatments promoted a similar increase in ALP activity compared with control. The in vivo results indicated a positive effect of the BMP-2 + MMP-10 combination at both of the doses tested on tissue repair for OP mice while it had the opposite effect on non-OP animals. This fact can be explained by the scaffold's slow-release rate and degradation that could be beneficial for delayed bone regeneration conditions but had the reverse effect on healthy animals. Therefore, the development of adequate scaffolds for bone regeneration requires consideration of the tissue catabolic/anabolic balance to obtain biomaterials with degradation/release behaviors suited for the existing tissue status.

Evaluation of human umbilical vein endothelial cells growth onto heparin-modified electrospun vascular grafts.

One of the main challenges of cardiovascular tissue engineering is the development of bioresorbable and compliant small-diameter vascular grafts (SDVG) for patients where autologous grafts are not an option. In this work, electrospun bilayered bioresorbable SDVG based on blends of poly(L-lactic acid) (PLLA) and segmented polyurethane (PHD) were prepared and evaluated. The inner layer of these SDVG was surface-modified with heparin, following a methodology involving PHD urethane functional groups. Heparin was selected as anticoagulant agent, and also due to its ability to promote human umbilical vein endothelial cells (HUVECs) growth and to inhibit smooth muscle cells over-proliferation, main cause of neointimal hyperplasia and restenosis. Immobilized heparin was quantified and changes in SDVG microstructure were investigated through SEM. Tensile properties of the heparin-functionalized SDVG resembled those of saphenous vein. Vascular grafts were seeded with HUVECs and cultured on a flow-perfusion bioreactor to analyze the effect of heparin on graft endothelization under simulated physiological-like conditions. The analysis of endothelial cells attachment and gene expression (Real-Time PCR) pointed out that the surface functionalization with heparin successfully promoted a stable and functional endothelial cell layer.

Tailor-made oligonucleotide-loaded lipid-polymer nanosystems designed for bone gene therapy.

Gene therapy has emerged as a tool for the treatment of systemic metabolic disorders as osteoporosis (OP). However, the design of a suitable vehicle able to efficiently load and release the genetic material on the target cells is still a challenge. Moreover, the internalization pathway of nanosystems has been described to be dependent on their surface characteristics and the cell type evaluated. In this study, we aim at obtaining PEGylated lipid-PLGA nanoparticles (NPs) with variable surface charge able to incorporate GapmeRs (single-strand antisense oligonucleotides) for OP treatment. Nanoparticles showing negative, positive, and neutral surface charge were obtained by modulating the lipid composition. All formulations showed a remarkably low polydispersity index with adequate size. NPs were loaded with GapmeRs showing a high encapsulation efficiency and a surface charge-independent oligonucleotide loading. All the formulations were adequately internalized by MSCs. Future experiments will be devoted to use the developed formulations to clarify if the intracellular distribution of hybrid NPs on mesenchymal stem cells (MSCs) is dependent on surface charge. This portfolio of NPs will serve as a tool to analyze the effect of NP surface charge on gene therapy efficiency.

The three NADH dehydrogenases of Pseudomonas aeruginosa: Their roles in energy metabolism and links to virulence.

Pseudomonas aeruginosa is a ubiquitous opportunistic pathogen which relies on a highly adaptable metabolism to achieve broad pathogenesis. In one example of this flexibility, to catalyze the NADH:quinone oxidoreductase step of the respiratory chain, P. aeruginosa has three different enzymes: NUO, NQR and NDH2, all of which carry out the same redox function but have different energy conservation and ion transport properties. In order to better understand the roles of these enzymes, we constructed two series of mutants: (i) three single deletion mutants, each of which lacks one NADH dehydrogenase and (ii) three double deletion mutants, each of which retains only one of the three enzymes. All of the mutants grew approximately as well as wild type, when tested in rich and minimal medium and in a range of pH and [Na+] conditions, except that the strain with only NUO (ΔnqrFΔndh) has an extended lag phase. During exponential phase, the NADH dehydrogenases contribute to total wild-type activity in the following order: NQR > NDH2 > NUO. Some mutants, including the strain without NQR (ΔnqrF) had increased biofilm formation, pyocyanin production, and killed more efficiently in both macrophage and mouse infection models. Consistent with this, ΔnqrF showed increased transcription of genes involved in pyocyanin production.