Cardiac arrhythmias classification using photoplethysmography database.

Worldwide, Cardiovascular Diseases (CVDs) are the leading cause of death. Patients at high cardiovascular risk require long-term follow-up for early CVDs detection. Generally, cardiac arrhythmia detection through the electrocardiogram (ECG) signal has been the basis of many studies. This technique does not provide sufficient information in addition to a high false alarm potential. In addition, the electrodes used to record the ECG signal are not suitable for long-term monitoring. Recently, the photoplethysmogram (PPG) signal has attracted great interest among scientists as it provides a non-invasive, inexpensive, and convenient source of information related to cardiac activity. In this paper, the PPG signal (online database Physio Net Challenge 2015) is used to classify different cardiac arrhythmias, namely, tachycardia, bradycardia, ventricular tachycardia, and ventricular flutter/fibrillation. The PPG signals are pre-processed and analyzed utilizing various signal-processing techniques to eliminate noise and artifacts, which forms a stage of signal preparation prior to the feature extraction process. A set of 41 PPG features is used for cardiac arrhythmias' classification through the application of four machine-learning techniques, namely, Decision Trees (DT), Support Vector Machines (SVM), K-Nearest Neighbors (KNNs), and Ensembles. Principal Component Analysis (PCA) technique is used for dimensionality reduction and feature extraction while preserving the most important information in the data. The results show a high-throughput evaluation with an accuracy of 98.4% for the KNN technique with a sensitivity of 98.3%, 95%, 96.8%, and 99.7% for bradycardia, tachycardia, ventricular flutter/fibrillation, and ventricular tachycardia, respectively. The outcomes of this work provide a tool to correlate the properties of the PPG signal with cardiac arrhythmias and thus the early diagnosis and treatment of CVDs.

Investigating the impact of smoking habits through photoplethysmography analysis.

Smoking is widely recognized as a significant risk factor in the progression of arterial stiffness and cardiovascular diseases. Valuable information related to cardiac arrhythmias and heart function can be obtained by analyzing biosignals such as the electrocardiogram (ECG) and the photoplethysmogram (PPG). The PPG signal is a non-invasive optical technique that can be used to evaluate the changes in blood volume, and thus it can be linked to the health of the vascular system.Objective. In this study, the impact of three smoking habits-cigarettes, shisha, and electronic cigarettes (e-cigarettes)-on the features of the PPG signal were investigated.Approach. The PPG signals are measured for 45 healthy smokers before, during, and after the smoking session and then processed to extract the morphological features. Quantitative statistical techniques were used to analyze the PPG features and provide the most significant features of the three smoking habits. The impact of smoking is observed through significant changes in the features of the PPG signal, indicating blood volume instability.Main results. The results revealed that the three smoking habits influence the characteristics of the PPG signal significantly, which presentseven after 15 min of smoking. Among them, shisha has the greatest impact on PPG features, particularly on heart rate, systolic time, augmentation index, and peak pulse interval change. In contrast, e-cigarettes have the least effect on PPG features. Interestingly, smoking electronic cigarettes, which many participants use as a substitute for traditional cigarettes when attempting to quit smoking, has nearly a comparable effect to regular smoking.Significance. The findings suggest that individuals who smoke shisha are more likely to develop cardiovascular diseases at an earlier age compared to those who have other smoking habits. Understanding the variations in the PPG signal caused by smoking can aid in the early detection of cardiovascular disorders and provide insight into cardiac conditions. This ultimately contributes to the prevention of the development of cardiovascular diseases and the development of a health screening system.

Acetone sensing in liquid and gas phases using cyclic voltammetry.

This paper presents the use of cyclic voltammetry to measure acetone concentration in liquid and vapor forms at disposable screen-printed electrodes of platinum working electrode, platinum counter electrode, and silver/silver chloride reference electrode. The main characteristics of the acetone sensor including its linearity, sensitivity, reproducibility, and limit of detection (LOD) were studied by doing different experiments to test both liquid and vapor samples in the physiological range of 1 µM to 10 mM. The change in acetone concentration was monitored by comparing the lineshape of butterfly region before and after injecting the acetone sample in the baseline solution that contains 0.5 M H2SO4. The sensor was shown to have a good sensitivity, reproducibility, and a linear response with respect to the acetone concentration in both liquid and gas phases over a range of 1 µM to 10 mM with R2 > 0.97 and LOD of 0.1 µM. The system stability was improved by building a closed glass system to reduce the exchange of acetone with the surrounding air in an open environment. The closed system was tested using vapor samples and the error bars in the calibration curve were reduced to more than half of their values before using the closed system. The new system will be used extensively in future for an enzyme-based acetone sensor that will be used for diabetes monitoring.

Towards a portable-noninvasive blood pressure monitoring system utilizing the photoplethysmogram signal.

Blood pressure (BP) responds instantly to the body's conditions, such as movements, diseases or infections, and sudden excitation. Therefore, BP monitoring is a standard clinical measurement and is considered one of the fundamental health signs that assist in predicting and diagnosing several cardiovascular diseases. The traditional BP techniques (i.e. the cuff-based methods) only provide intermittent measurements over a certain period. Additionally, they cause turbulence in the blood flow, impeding the continuous BP monitoring, especially in emergency cases. In this study, an instrumentation system is designed to estimate BP noninvasively by measuring the PPG signal utilizing the optical technique. The photoplethysmogram (PPG) signals were measured and processed for ≈ 450 cases with different clinical conditions and irrespective of their health condition. A total of 13 features of the PPG signal were used to estimate the systolic and diastolic blood pressure (SBP and DBP), utilizing several machine learning techniques. The experimental results showed that the designed system is able to effectively describe the complex-embedded relationship between the features of the PPG signal and BP (SBP and DBP) with high accuracy. The mean absolute error (MAE) ± standard deviation (SD) was 4.82 ± 3.49 mmHg for the SBP and 1.37 ± 1.65 mmHg for the DBP, with a mean error (ME) of ≈ 0 mmHg. The estimation results are consistent with the Association for the American National Standards of the Association for the Advancement of Medical Instrumentation (AAMI) and achieved Grade A in the British Hypertension Society (BHS) standards for the DBP and Grade B for the SBP. Such a study effectively contributes to the scientific efforts targeting the promotion of the practical application for providing a portable-noninvasive instrumentation system for BP monitoring purposes. Once the BP is determined with sufficient accuracy, it can be utilized further in the early prediction and classification of various arrhythmias such as hypertension, tachycardia, bradycardia, and atrial fibrillation (as the early detection can be a critical issue).

A comparative study of photoplethysmogram and piezoelectric plethysmogram signals.

The Photoplethysmogram (PPG) signal is one of the most important vital signals in biomedical applications. The non-invasive property and the convenience in the acquisition of both PPG and Piezoelectric Plethysmogram (PZPG) signals are considered as powerful and accurate tools for biomedical diagnosing applications, such as oxygen saturation in blood, blood flow, and blood pressure measurements. In this paper, a number of features for PPG and PZPG signals (ex. first derivative, second derivative, area under the curve and the ratio of systolic area to the diastolic area) are acquired and compared. The results show that both systems are able to extract the pulse rate (PR) and pulse rate variability (PRV), accurately with an estimation error of less than 10%. The averaged standard deviation of the ratio of the systolic area to the diastolic area for the first derivative of PPG and PZPG signals was small with less than 0.49 and 0.69 for the PPG and PZPG, respectively. Statistical analysis techniques (such as cross-correlation, P-value test, and Bland Altman method) are performed to address the relation between the PPG and PZPG signals. All of these methods showed a strong relationship between the features of the two signals (i.e. PPG and PZPG). The correlation value is found to be 0.954 with a p-value of < 0.05. This opens possibilities for combining both the PPG and PZPG systems to extract more features that can be used in diagnosing cardiovascular diseases. Such a system can provide a possibility to reduce the number of devices connected to patients (especially in emergencies) by means of measuring simultaneously both signals (PZPG and PPG).

Multiple time and spectral analysis techniques for comparing the PhotoPlethysmography to PiezoelectricPlethysmography with electrocardiography.

Photoplethysmography (PPG) is an important, non-invasive and widely used circulatory assessment technique. It is commonly used to measure heart rate and arterial oxygen saturation (SPO2) by measuring the changes occurred in the blood volume and shows many future perspective applications. In this paper, various time and frequency analysis techniques are used to investigate the spectral differences of the signals obtained using the PPG and the piezoelectricplethysmography (PEPG) techniques. The time delay, effect of respiration and motion artifacts have been investigated in time and frequency domain for both; the PPG and PEPG signals. The electrocardiograph (ECG) signal has been used as a reference. The heart-rate has been estimated using both signals; the PPG and PEPG. The hypothesis of this paper is that PPG and PEPG signals features integration can lead to improve the understanding and estimation of the human body's vital signs by including multi-dimensional features. The results show that the PPG signal is the most robust technique in terms of change in frequency and time domains under the same conditions. Additionally, the PPG signal is less sensitive to artifacts compared to the PEPG signal. Such a study opens possibilities to consider the PPG signal for a wide range of biomedical applications especially in wearable biomedical technologies to utilize its non-invasive property.

Imaging dipole flow sources using an artificial lateral-line system made of biomimetic hair flow sensors.

In Nature, fish have the ability to localize prey, school, navigate, etc., using the lateral-line organ. Artificial hair flow sensors arranged in a linear array shape (inspired by the lateral-line system (LSS) in fish) have been applied to measure airflow patterns at the sensor positions. Here, we take advantage of both biomimetic artificial hair-based flow sensors arranged as LSS and beamforming techniques to demonstrate dipole-source localization in air. Modelling and measurement results show the artificial lateral-line ability to image the position of dipole sources accurately with estimation error of less than 0.14 times the array length. This opens up possibilities for flow-based, near-field environment mapping that can be beneficial to, for example, biologists and robot guidance applications.