RESUMO
In response to the need for less energy-intensive and greener bitumen recovery techniques, the use of multicomponent diluents through the expanding solvent steam-assisted gravity drainage (ES-SAGD) technique has garnered significant interest in recent years. In this work, we report new comprehensive measurements and Peng-Robinson equation of state (PR EoS) modeling of thermophysical properties (saturation pressure, density, viscosity, and K-values) of multicomponent mixtures of methane-bitumen-solvent. The multicomponent solvent is a natural gas condensate comprised of C3, i-C4, n-C4, i-C5, n-C5, C6, and C7+. Density, viscosity, solubility, and K-values of live bitumen (bitumen with dissolved methane) and various multicomponent mixtures are measured in the pressure range of 1-4 MPa and the temperature range of 313.41-459.10 K. A systematic approach is utilized to model the measured data. The experimental data show that the saturation pressure of the live bitumen can be controlled by selecting an appropriate solvent (condensate) composition. Condensate also has a significant effect on reducing the density and viscosity of the system. The results also show that the K-values of the components are almost independent of the composition of the solvent. The new comprehensive data set and the EoS model parameters reported in this work find applications in reservoir simulation as well as the design and optimization of the ES-SAGD process.
RESUMO
We examine the applicability of urea solutions as a novel cost-effective chemical for enhanced oil recovery processes. Two sandpack flooding experiments were conducted using 5 and 10 wt % urea solutions. Another flooding experiment was also carried out using the same sandpack with fresh water and used as a reference. Supporting experiments such as interfacial tension (IFT), viscosity of water in oil (W/O) emulsions, total acid number (TAN), and Fourier-transform infrared (FTIR) spectroscopy were conducted to confirm the generation of in situ surfactants by reacting urea solutions with the naphthenic acids in bitumen and evaluate their impact on the oil recovery. The analyses of FTIR, IFT, TAN, and viscosity measurements support the generation of in situ surfactants that leads to the formation of stable water in oil emulsions and hence a more stable displacement front resulting in higher oil recovery.