Accelerated Wound Healing with a Diminutive Scar through Cocrystal Engineered Curcumin.

Pharmaceutical cocrystals ( Regulatory Classification of Pharmaceutical Co-Crystals Guidance for Industry; Food and Drug Administration, 2018) are crystalline solids produced through supramolecular chemistry to modulate the physicochemical properties of active pharmaceutical ingredients (APIs). Despite their extensive development in interdisciplinary sciences, this is a pioneering study on the efficacy of pharmaceutical cocrystals in wound healing and scar reducing. Curcumin-pyrogallol cocrystal (CUR-PYR) was accordingly cherry-picked since its superior physicochemical properties adequately compensate for limitative drawbacks of curcumin (CUR). CUR-PYR has been synthesized by a liquid-assisted grinding (LAG) method and characterized via FT-IR, DSC, and PXRD analyses. In vitro antibacterial study indicated that CUR-PYR cocrystal, CUR+PYR physical mixture (PM), and PYR are more effective against both Gram-negative (Pseudomonas aeruginosa and Escherichia coli) and Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria in comparison with CUR. In vitro results also demonstrated that the viability of HDF and NIH-3T3 cells treated with CUR-PYR were improved more than those received CUR which is attributed to the effect of PYR in the form of cocrystal. The wound healing process has been monitored through a 15 day in vivo experiment on 75 male rats stratified into six groups: five groups treated by CUR-PYR+Vaseline (CUR-PYR.ung), CUR+PYR+Vaseline (CUR+PYR.ung), CUR+Vaseline (CUR.ung), PYR+Vaseline (PYR.ung), and Vaseline (VAS) ointments and a negative control group of 0.9% sodium chloride solution (NS). It was revealed that the wounds under CUR-PYR.ung treatment closed by day 12 postsurgery, while the wounds in other groups failed to reach the complete closure end point until the end of the experiment. Surprisingly, a diminutive scar (3.89 ± 0.97% of initial wound size) was observed in the CUR-PYR.ung treated wounds by day 15 after injury, followed by corresponding values for PYR.ung (12.08 ± 2.75%), CUR+PYR.ung (13.89 ± 5.02%), CUR.ung (16.24 ± 6.39%), VAS (18.97 ± 6.89%), and NS (20.33 ± 5.77%). Besides, investigating histopathological parameters including inflammation, granulation tissue, re-epithelialization, and collagen deposition signified outstandingly higher ability of CUR-PYR cocrystal in wound healing than either of its two constituents separately or their simple PM. It was concluded that desired solubility of the prepared cocrystal was essentially responsible for accelerating wound closure and promoting tissue regeneration which yielded minimal scarring. This prototype research suggests a promising application of pharmaceutical cocrystals for the purpose of wound healing.

Robust tag-free aptasensor for monitoring of tobramycin: Architecting of rolling circle amplification and fluorescence synergism.

With the unpredictable risks on human health and ecological safety, tobramycin (TOB) as an extensively applied antibiotic has embraced global concern. Herein, a label-free fluorescent aptasensor was developed that opened up an innovative sensing strategy for monitoring trace TOB levels. Based on the rolling circle amplification (RCA) process, a giant DNA building was established by the catalytic action of T4 DNA ligase and Phi 29 DNA polymerase with the cooperation of the specific aptamer as a primer skeleton. By having the role of signal amplifier template, the RCA product with the G-quadruplex sequence duplications was decorated by a high number of the thioflavin T (ThT) fluorescent dyes. The aptasensor with good selectivity toward TOB achieved a detection limit as low as 150 pM. Thanks to its accurate target quantification, ease of operation, economic manufacture, as well as high potency for real-time and point-of-care testing, the represented aptasensor is superb for clinical application and food safety control.

A highly sensitive fluorescent aptasensor for detection of prostate specific antigen based on the integration of a DNA structure and CRISPR-Cas12a.

Herein, a facile fluorescent CRISPR-Cas12a-based sensing strategy is presented for prostate specific antigen (PSA), as a prostate cancer biomarker, with the assistance of a cruciform DNA nanostructure and PicoGreen (PG) as a fluorochrome. Highly sensitive recognition of PSA is one of the virtues of the proposed method which comes from the use of unique features of both CRISPR-Cas12a and DNA structure in the design of the aptasensor. The presence of PSA creates a cruciform DNA nanostructure in the sample which can be loaded by PG and make sharp fluorescence emission. While, when there is no PSA, the CRISPR-Cas12a digests sequences 1 and 3 as single-stranded DNAs, causing no DNA structure and a negligible fluorescence is detected after addition of PG. This aptasensor presents a sensitive recognition performance with detection limit of 4 pg/mL and a practical use for determination of PSA in serum samples. So, this analytical strategy introduces a convenient and highly sensitive approach for detection of disease biomarkers.

A highly sensitive electrochemical aptasensor for cocaine detection based on CRISPR-Cas12a and terminal deoxynucleotidyl transferase as signal amplifiers.

Cocaine is one of the mainly used illegal drugs in the world. Using the signal amplification elements of terminal deoxynucleotidyl transferase (TdT) and CRISPR-Cas12a, a highly sensitive and simple electrochemical aptasensor was introduced for cocaine quantification. When, no cocaine existed in the sample, the 3'-end of complementary strand of aptamer (CS) was extended by TdT, leading to the activation of CRISPR-Cas12a and remaining of very short oligonucleotides on the working electrode. So, the current signal was remarkably promoted. With the presence of cocaine, CS left the electrode surface. Thus, nothing changed following the incubation of TdT and CRISPR-Cas12a and the Aptamer/Cocaine complex presented on the electrode. Consequently, the [Fe(CN)6]3-/4- could not freely reach the electrode surface and the signal response was weak. Under optimal situations, the biosensor revealed a wide linear relation from 40 pM to 150 nM with detection limit of 15 pM for cocaine. The sensitivity of the analytical system was comparable and even better than other reported methods for cocaine detection. The designed method displayed excellent cocaine selectivity. The aptasensor could work well for cocaine assay in serum samples. So, the aptasensor is expected to be an efficient analytical method with broad applications in the determination of diverse analytes.

Targeted delivery system using silica nanoparticles coated with chitosan and AS1411 for combination therapy of doxorubicin and antimiR-21.

Herein, a novel targeted delivery system was developed for intracellular co-delivery of doxorubicin (DOX) as a chemotherapeutic drug, antimiR-21 as an oncogenic antagomiR. In this system, DOX was loaded into mesoporous silica nanoparticles (MSNs) and chitosan was applied to cover the surface of MSNs. AS1411 aptamer as targeting nucleolin and antimiR-21 were electrostatically attached onto the surface of the chitosan-coated MSNs and formed the final nanocomplex (AACS nanocomplex). The study of drug release was based on DOX release under pH 7.4 and 5.5. Cellular toxicity and cellular uptake assessments of AACS nanocomplex were carried out in nucleolin positive (C26, MCF-7, and 4T1) and nucleolin negative (CHO) cell lines using MTT assay and flow cytometry analysis, respectively. Also, Anti-tumor efficacy of AACS nanocomplex was evaluated in C26 tumor-bearing mice. Overall, the results show that the combination therapy of DOX and antimiR-21, using AACS nanocomplex, could combat the cancer cell growth rate.

A novel colorimetric aptasensor for ultrasensitive detection of aflatoxin M1 based on the combination of CRISPR-Cas12a, rolling circle amplification and catalytic activity of gold nanoparticles.

Colorimetric approaches have received noticeable attention among sensing methods in view of simplicity and watching the color change of sample by the naked eyes. However, developing colorimetric sensing methods which show high sensitivity is still problematic. Herein, based on CRISPR-Cas12a, rolling circle amplification (RCA) and catalytic activity of gold nanoparticles (AuNPs), a colorimetric aptasensor was introduced for highly sensitive detection of aflatoxin M1 (AFM1). In the presence of AFM1, the CRISPR-Cas12a is inactivated and large single-stranded DNA (ssDNA) structures are formed on the surface of AuNPs following the addition of T4 DNA ligase and phi29 DNA polymerase. So, the sample color remains yellow after addition of 4-nitrophenol. However, no huge DNA structure is observed on the surface of AuNPs in the absence of target because of activation of CRISPR-Cas12a and digestion of primer. So, the color of sample switches to colorless. The results indicated that the biosensor had high selectivity toward AFM1 and the approach achieved a detection limit as low as 0.05 ng/L. In addition, it could sensitively identify AFM1 in the spiked milk samples. Overall, this approach is highly sensitive and does not require sophisticated equipment. Therefore, it maintains promising potential for other mycotoxins detection in real samples by simply replacing the applied sequences.

A fluorescent sensing strategy for ultrasensitive detection of oxytetracycline in milk based on aptamer-magnetic bead conjugate, complementary strand of aptamer and PicoGreen.

Misuse of antibiotics in animal husbandry and presence of their residues in animal foods is a serious crisis worldwide and thus, monitoring the level of them in food samples is vital for human health. Herein, a fluorescent aptasensor was developed for highly sensitive quantification of oxytetracycline (OTC) in food samples. This method is based on OTC aptamer conjugated to magnetic beads, functioned as recognition element, complementary strand of OTC aptamer, and PicoGreen (PG) as a sensitive double-stranded DNA (dsDNA) fluorescent dye. Formation of OTC aptamer-magnetic bead conjugate provides the opportunity of sample condensation and separation technology. Additionally, the presence of complementary strand leads to significant fluorescence signal alteration of aptasensor in the presence or absence of target and a noteworthy improvement of the aptasensor sensitivity. In the absence of target, complementary strand could bind to aptamer and form dsDNA on the surface of magnetic bead. As a consequence, adding PG to the sample leads to observation of high fluorescence signal from sample. In contrast, once OTC is added to the sample, it binds to OTC aptamer-magnetic bead complex and prevents hybridization of OTC aptamer and its complementary strand. Hence, after addition of PG to the sample, a weak fluorescence intensity is measured. Under optimized conditions, the linear ranges for OTC detection were 0.2-2 nM and 2-800 nM. The detection limit was calculated to be as low as 0.15 nM for the fabricated aptasensor. Besides the great sensitivity, proposed method demonstrated superior specificity towards OTC once it was used against several antibiotics. More significantly, the recovery rates of OTC in milk ranged from 96.46% to 101.5%, implying the great feasibility of designed sensor as well as its potential to be employed for analysis of OTC in real samples.

An optical aptasensor for aflatoxin M1 detection based on target-induced protection of gold nanoparticles against salt-induced aggregation and silica nanoparticles.

Not only intoxications of aflatoxins are significant risk for human beings, but also; the contamination with these toxins affect the economy. Therefore, developing a rapid, precise and inexpensive determination method is vitally important. Here, a colorimetric aptasensor is introduced for the detection of aflatoxin M1 (AFM1) based on the preservation of gold nanoparticles (AuNPs) against NaCl-induced aggregation by detaching of complementary strand of aptamer (CS) from the aptamer-modified streptavidin coated silica nanoparticles (SNPs) following the addition of target. So, the color of sample remains red. While, in the lack of AFM1, salt-induced aggregation of AuNPs occurs and the color of sample becomes purple as the aptamer/CS (dsDNA)-modified SNPs is stable and CS cannot bind to AuNPs. The proposed aptasensor could detect AFM1 in a linear dynamic range, 300-75,000 ng/L, with a detection limit of 30 ng/L. Also, the sensing method was effectively applied for AFM1 recognition in milk samples.

A novel electrochemical aptasensor for ochratoxin a sensing in spiked food using strand-displacement polymerase reaction.

Herein, an aptasensor is presented for electrochemical determination of ochratoxin A (OTA) based on nontarget-triggered production of rolling circular amplification (RCA). The surface of gold electrode is modified with thiolated complementary strand of aptamer (CS) as both capture probe and primer and OTA aptamer (Apt) as both sensing molecule and padlock probe (PLP). Following the addition of OTA, Apt/OTA conjugate is formed and detached from the electrode surface. Therefore, no RCA is produced after incubation of the modified electrode with T4 DNA ligase and phi29 DNA polymerase and a sharp current signal occurs. The analytical response ranged from 30 pM to 120 nM with detection limit of 5 pM. The designed aptasensor showed superior analytical performance in comparison with other approaches for OTA detection. Also, the approach exhibited good performance for OTA determination in spiked grape juice samples. The technique presented in this study, can be applied to develop sensors for detecting different toxins by replacing the relevant aptamers and complementary strands.

A DNA triangular prism-based fluorescent aptasensor for ultrasensitive detection of prostate-specific antigen.

In this study, a fluorescent aptasensor is described for ultrasensitive detection of prostate-specific antigen (PSA) using DNA triangular prism as a platform for attachment of fluorophore (PicoGreen, PG), streptavidin magnetic beads (SMBs) and RecJf exonuclease as enhancers of fluorescence difference between presence and absence of target. Presence of PSA leads to the formation of the DNA origami. So, a strong fluorescence is observed following the addition of PG. while, the DNA triangular prism cannot be formed in the lack of target. Thus, a very weak fluorescence can be measured after addition of PG. The proposed biosensor indicated high selectivity, a broad linear range from 200 pg/mL to 300 ng/mL and a very low detection limit of 30 pg/mL for PSA. Applying the designed aptasensor, PSA was successfully detected in human serum samples. This work provides a new way for detection of biomarkers in clinical samples.

A smart ATP-responsive chemotherapy drug-free delivery system using a DNA nanostructure for synergistic treatment of breast cancer in vitro and in vivo.

This study demonstrated a chemotherapy drug-free delivery system for breast cancer treatment based on a simple DNA nanostructure composed of sequence 1 containing ATP and AS1411 aptamers and sequence 2 containing antimiR-21. The DNA nanostructure was used for co-delivery of KLA peptide and antimiR-21 as antiapoptotic agents. These therapeutic agents could not be internalised into eukaryotic cells freely which is one of the great features of this targeting platform. The presented delivery system was ATP-responsive, leading to disassembly of the DNA nanostructure in high ATP concentration of cancer cells and restoration of the function of antimiR-21 in these cells. The DNA nanostructure was associated with high cellular uptake by MCF-7 and 4T1 cells due to expression of nucleolin as target of AS1411 on their plasma membranes, while the developed targeting platform could not be internalised into CHO cells because of lack of the active targeting moiety on their surfaces. Furthermore, the results showed that co-delivery of antimiR-21 and KLA peptide using the DNA nanostructure could efficiently prohibit tumour growth in vitro and in vivo and induce a synergistic anticancer activity. Thus, this work provides a new ATP-responsive nanotargeting delivery system and synergistic chemotherapy drug-free regimen for cancer treatment.

An ultrasensitive electrochemical sensing method for detection of microcystin-LR based on infinity-shaped DNA structure using double aptamer and terminal deoxynucleotidyl transferase.

This study develops a novel electrochemical sensing platform for microcystin-LR (MC-LR) detection. This aptasensor comprises the hybridization of double aptamer to its complementary strand (CS) on the surface of electrode and generation of an Infinity-shaped DNA structure in the absence of target by terminal deoxynucleotidyl transferase (TdT). The formation of Infinity-shaped construction leads to the development of an ultrasensitive aptasensor for MC-LR detection. In the presence of MC-LR, double aptamer is dissociated from its CS because of its high affinity for MC-LR and leaves the surface of electrode. Subsequently, no Infinity-shaped structure is formed following the introduction of TdT and a strong current signal is observed. The proposed method was employed for specific detection of MC-LR in the range from 60 pM to 1000 nM with a detection limit of 15 pM. The credibility of the approach was confirmed by detection of MC-LR in real samples like serum and tap water samples. This study provides a new aptasensor for detection of MC-LR as well as other toxin analysis.

A rapid and simple ratiometric fluorescent sensor for patulin detection based on a stabilized DNA duplex probe containing less amount of aptamer-involved base pairs.

In this study, a sensor is described for determination of patulin by using ratiometric fluorescence measurement and strand displacement strategy. In the presence of patulin, the ratiometric fluorescence response decreases, owing to disassembly of DNA duplex structure and target-mediated release of TAMRA-labeled complementary DNA sequence2 (cDNA2). While, in the absence of target, the fluorescence resonance energy transfer (FRET) phenomenon happens between FAM and TAMRA under excitation at 490 nm, resulting in the enhancement of ratiometric signal. The use of ratiometric fluorescence signal with different signal indicators avoids the problem of environmental interference and improves the sensitivity of the aptasensor. Also, the DNA duplex structure contains minimum aptamer-involved base pair sequence, resulting in further improvement of the aptasensor sensitivity. This sensing platform provided a wide linear range from 15 ng/L to 35 µg/L and a detection limit of 6 ng/L for patulin. The aptasensor was used to determine patulin in spiked apple juice samples and showed satisfactory results.

Fluorescent sensor for detection of miR-141 based on target-induced fluorescence enhancement and PicoGreen.

Studies have shown that microRNAs affect the development of tumors. In many cases, they can be applied as biomarkers for the diagnosis of cancer; therefore, simple and sensitive analytical methods for detection of miRNAs are necessary. In this study, miR-141, which is used to diagnose several types of cancer, was detected in water and serum samples using a biosensor designed based on streptavidin-coated magnetic beads (SMBs), complementary sequences of miR-141 and PicoGreen as the fluorescent dye. The method is relatively fast and simple. Briefly, in the presence of miR-141, the complementary sequence forms a DNA:RNA double-strand on the surface of SMBs with intercalated PicoGreen. Upon attachment of the PicoGreen, the fluorescence intensity increased significantly (1000-fold). In the absence of a target, only single-stranded DNA (complementary strand of miR-141) existed on the surface of the SMBs. The fluorescence of the PicoGreen was low. The results revealed that the detection limits of the biosensor for miR-141 were 70 and 113.8 nmol L-1 in deionized water and serum samples, respectively.

An electrochemical sensing platform based on ladder-shaped DNA structure and label-free aptamer for ultrasensitive detection of ampicillin.

Herein, an electrochemical aptasensor is described for detection of ampicillin (Ampi). The sensing strategy is based on the application of a ladder-shaped DNA structure as a multi-layer physical block on the surface of gold electrode. Attributing to the electrostatic repulsion and physical prevention of the ladder-shaped DNA structure, ultrasensitive detection of Ampi was achieved with a detection limit as low as 1 pM. In the presence of Ampi, the ladder-shaped DNA structure is disassembled and detached from the electrode surface. This leads to the high access of [Fe(CN)6]3-/4- as a redox indicator to the electrode surface and a strong redox peak. The aptasensor response for Ampi detection was in the linear range from 7 pM to 100 nM with the detection limit of 1 pM. The presented analytical strategy showed its application in detecting Ampi in the spiked milk samples with satisfactory performance. This work can be easily expanded for different targets by alternating the corresponding aptamers.

An ultrasensitive electrochemical sensor for 17ß-estradiol using split aptamers.

Herein, a simple electrochemical sensor is proposed for 17ß-estradiol (E2) determination. In this sensing platform, split DNA aptamers for E2 were applied as recognizing agents. In the presence of E2, split aptamers are bound to E2 and establish split1-E2-split2 complex as a bridge on the surface of electrode. This physical bar leads to ultrasensitive detection of E2. This aptasensor is capable of recognizing E2 within 30 min without complicated procedures and expensive equipment. This sensing approach indicated a wide linear range with detection limits of 0.5 pM and 0.7 pM for E2 in tap water and milk samples, respectively. Simplicity and high specificity of the proposed electrochemical aptasensor make it an ideal sensing platform for ultra-low detection of other targets in complicated samples by replacement of split DNA aptamers.

A novel electrochemical aptasensor based on nontarget-induced high accumulation of methylene blue on the surface of electrode for sensing of α-synuclein oligomer.

This study describes a novel electrochemical aptasensor for detection of α-synuclein (α-syn) oligomer, an important biomarker related to Parkinson's and Alzheimer's diseases. The sensing platform is based on exonuclease I (Exo I), terminal deoxynucleotidyl transferase (TdT) and methylene blue. The aptasensor exploits the improved sensitivity because of applications of TdT and Exo I and also a label-free aptamer (Apt). Furthermore, direct immobilization of complementary strand of aptamer (CS) instead of Apt on the surface of electrode prohibits Apt self-assembled monolayer aggregation and keeps the function of the Apt. In the absence of α-syn oligomer, TdT enhances lengths of Apt and CS and so, increases accumulation of methylene blue as redox agent on the surface of electrode, leading to a strong current signal. While in the presence of α-syn oligomer, Exo I digests CS on the electrode surface, resulting in less accumulation of methylene blue on the electrode surface and a weak current signal. The relative electrochemical signal of the aptasensor increased linearly with the logarithm of α-syn oligomer concentration in the range from 60 pM to 150 nM. The detection limit was 10 pM. Furthermore, the sensor showed high precision and repeatability for detection of α-syn oligomer in serum samples.

Targeted delivery of doxorubicin to cancer cells by a cruciform DNA nanostructure composed of AS1411 and FOXM1 aptamers.

OBJECTIVES: Here, a novel cruciform DNA nanostructure was developed for targeted delivery of doxorubicin (Dox), as an anticancer agent, to lung (A549 cells) and breast (4T1 cells) cancer cells. The cruciform DNA nanostructure consisted of AS1411 aptamer as targeting agent and Forkhead Box Protein M1(FOXM1) aptamer as therapeutic agent. METHODS: MTT assay, fluorescence imaging, flow cytometry analysis, and in vivoantitumor efficacy were performed to evaluate the function of the Dox-DNA nanostructure complex. RESULTS: The presented delivery system benefited from tumor targeting, high stability in serum and simple construction. The Dox-DNA nanostructure complex showed a noticeable higher internalization degree into A549 and 4T1 cells (target), overexpressing nucleolin on their cell membranes, compared to CHO cells (nontarget, nucleolin negative). Moreover, the results of MTT assay exhibited that Dox-DNA nanostructure complex significantly decreased cell viability in A549 and 4T1 cells compared to CHO cells, which significantly preserved their viability. Besides, Dox-DNA nanostructure complex significantly reduced tumor growth in tumor-bearing mice in comparison with Dox and DNA nanostructure treatments. CONCLUSION: These findings confirmed that synergistic combination of FOXM1 aptamer and Dox into Dox-DNA nanostructure complex enhanced antitumor effectiveness and reduced toxicity toward nontarget cells, opening up new insights in cancer treatment.

A novel electrochemical sensor for bisphenol A detection based on nontarget-induced extension of aptamer length and formation of a physical barrier.

In this study, a novel electrochemical sensing strategy was developed based on nontarget-induced bridge assembly and aptamer (Apt) extension reaction triggered by terminal deoxynucleotidyl transferase (TdT). Bisphenol A (BPA) was chosen as the target analyte to study the analytical performance of the designed aptasensor. This sensing system takes advantages of electrochemical sensing platforms and detection of an ultra-low level of BPA, due to the formation of bridge on the surface of electrode in the absence of BPA. In the presence of BPA, Apt/BPA complex is formed and inhibits the access of TdT to the 3'-end of Apt, resulting in the lack of bridge assembly and high access of [Fe(CN)6]3-/4- as redox agent to the electrode surface. Thus, a strong redox peak is observed. This aptasensor enabled the selective detection of BPA with the wide linear range of 0.08-15 nM and detection limit as low as 15 pM. Furthermore, the presented sensing platform was successfully applied for the detection of BPA in tap water and grape juice samples.

A new amplified fluorescent aptasensor based on hairpin structure of G-quadruplex oligonucleotide-Aptamer chimera and silica nanoparticles for sensitive detection of aflatoxin B1 in the grape juice.

As one of the most toxic mycotoxins, aflatoxin B1 (AFB1) is a major food pollutant which can pose a high risk to human health. In this work, an accurate fluorescent sensing method was proposed for AFB1 determination, based on hairpin structure of G-quadruplex oligonucleotide-Aptamer chimera, silica nanoparticles coated with streptavidin (SNPs-Streptavidin) and N-methyl mesoporphyrin IX (NMM). The hairpin structure of chimera and SNPs-Streptavidin allowed AFB1 detection with high sensitivity and specificity. Moreover, the developed sensor could detect AFB1 in 30 min. The relative fluorescence intensity increased as AFB1 concentrations increased with a linear range of 30-900 pg/mL and a limit of detection (LOD) of 8 pg/mL. The constructed aptasensor was successfully employed to assess AFB1 spiked grape juice and human serum samples. The analytical recovery of AFB1 in the grape juice samples ranged from 95 to 106%, implying the great potential of the presented aptasensor in food product analysis.