RESUMO
In this paper, coacervates were formed with mixed micelles consisting of the anionic amino acid surfactant sodium lauroylsarcosinate (NLS) and amphoteric surfactant cocamidopropyl betaine (CAPB) in combination with cationic guar gum. Based on personal care formulation studies, coacervates were prepared by diluting a concentrated system with water to better suit the product application process. The phase behavior during dilution was revealed by turbidity, which was influenced by the mixed micelle ratio (X), salt concentration, and dilution ratio (R). Optical microscopy, cryo-SEM, SAXS and rotational rheometry were used to characterize the structure and properties of the coacervates, which strongly depended on the interaction strength between the polymer and micelles. Dominated by electrostatic interactions, the coacervates exhibited a dense porous structure with low water content and a high viscoelastic modulus, while weakened interactions resulted in a looser mesh internal structure with lower viscoelasticity, enhancing skin adsorption. These findings enhance our understanding of polymer-mixed micelle systems and offer practical strategies for controlling the properties of coacervates.
RESUMO
A core-shell-shell sandwich material is developed with silver nanowires as the core, ZIF-8 as an inner shell, and gold nanoparticles as the outer shell, namely, Ag@ZIF-8@Au nanowires (AZA-NW). Then, the synthesized AZA-NW is transformed into a surface-enhanced Raman spectroscopy (SERS) sensor (named M-AZA) by the vacuum filtration method and used to enrich, detect, and inactivate traces of bacteria in the environment. The M-AZA sensor has three main functions: (1) trace bacteria are effectively enriched, with an enrichment efficiency of 91.4%; (2) ultrasensitive detection of trace bacteria is realized, with a minimum detectable concentration of 1 × 101 CFU/mL; (3) bacteria are effectively killed up to 92.4%. The shell thickness of ZIF-8 (5-75 nm) is controlled by adjusting the synthesis conditions. At an optimum shell thickness of 15 nm, the effect of gold nanoparticles and ZIF-8 shell on the sensor's stability, SERS activity, and antibacterial performance is investigated. The simulation of the SERS sensor using the finite difference time domain (FDTD) method is consistent with the experimental results, theoretically demonstrating the role of the gold nanoparticles and the ZIF-8 shell. The sensor also shows excellent stability, safety, and generalizability. The campus water sample is then tested on-site by the M-AZA SERS sensor, indicating its potential for practical applications.
Assuntos
Ouro , Nanopartículas Metálicas , Nanofios , Prata , Análise Espectral Raman , Análise Espectral Raman/métodos , Ouro/química , Prata/química , Nanofios/química , Nanopartículas Metálicas/química , Zeolitas/química , Antibacterianos/farmacologia , Antibacterianos/química , Bactérias/efeitos dos fármacos , Bactérias/isolamento & purificaçãoRESUMO
This study proposes a microfluidic platform for rapid enrichment and ultrasensitive SERS detection of bacteria. The platform comprises ZnO nanoflower arrays decorated with silver nanoparticles to enhance the SERS sensitivity. The ZnO nanoflower array substrate with a 3D reticular columnar structure is prepared using the hydrothermal method. SEM analysis depicts the 3.05 µm gap distribution of the substrate array to intercept the most bacteria in the particle sizes range of 0.5 to 3 µm. Then, silver nanoparticles are deposited on the ZnO nano-array surface by liquid evaporation self-assembly. TEM and SEM analysis indicate nanosize of Ag particles, evenly distributed on the substrate, enhancing the SERS efficiency and improving sensing reproducibility. The probe molecules (R6G) are tested to demonstrate the high SERS activity of the proposed microfluidic sensor. Then, Escherichia coli, Staphylococcus aureus, Enterococcus faecalis, and Bacillus subtilis are selected, demonstrating the sensor's excellent bacterial capture and sensitive recognition capabilities, with a detection limit as low as 102 CFU mL-1. Additionally, the antibacterial properties of ZnO/Ag heterojunction nanostructures are studied, suggesting their ability to inactivate bacteria. Compared with the traditional Au-enhanced chip, the sensor preparation is easy, safe, reliable, and low-cost. Moreover, the ZnO nano-array exhibits a large specific surface area, high interception ability, stronger and uniform SERS performance, and effective and reliable detection of trace pathogens. This work provides potential future ZnO/Ag microfluidic SERS sensor applications for rapid, unlabeled, and trace pathogens detection in clinical and environmental applications, potentially achieving breakthroughs in early detection, prevention, and treatment.
Assuntos
Nanopartículas Metálicas , Óxido de Zinco , Prata/química , Óxido de Zinco/química , Nanopartículas Metálicas/química , Reprodutibilidade dos Testes , Microfluídica , BactériasRESUMO
When confronted with wastewater that is characterized by complex composition, stable molecular structure, and high concentration, relying solely on photocatalytic technology proves inadequate in achieving satisfactory degradation results. Therefore, the integration of other highly efficient degradation techniques has emerged as a viable approach to address this challenge. Herein, a novel strategy was employed whereby the exfoliated g-C3N4 nanosheets (CNs) with exceptional photocatalytic performance, were intimately combined with porous rod-shaped cobalt ferrite (CFO) through a co-calcination process to form the composite CFO/CNs, which exhibited remarkable efficacy in the degradation of various organic pollutants through the combination of photocatalysis and Fenton-like process synergistically, exemplified by the representative case of tetracycline hydrochloride (TCH, 200 mL, 50 mg/L). Specifically, under 1 mM of peroxymonosulfate (PMS) and illumination conditions, 50 mg of 1CFO/9CNs achieved a TCH removal ratio of â¼90% after 60 min of treatment. Furthermore, this work comprehensively investigated the influence of various factors, including catalyst and PMS dosages, solution pH, and the presence of anions and humate, on the degradation efficiency of pollutants. Besides, quenching experiments and EPR tests confirmed the establishment of an S-scheme heterojunction between CNs and CFO, which facilitated the effective spatial separation of photoexcited charge carriers and preserved the potent redox potential of photogenerated electrons and holes. This work offers a valuable reference for the integration of photocatalysis with the PMS-based Fenton-like process.
Assuntos
Elétrons , Poluentes Ambientais , Porosidade , IluminaçãoRESUMO
The aggregation of 7S globulin protein (7SGP) in mature soybean (Glycine max) seeds is an extracellular matrix protein. This atomic compound can be detected in various food products. So, this protein structure's thermal properties (TP) can be important for various food industry products. Molecular Dynamics (MD) simulations describe the atomic arrangement of this protein and forecast TP of them in various initial conditions. The present computational work estimates the 7SGP thermal behavior (TB) by equilibrium (E) and non-equilibrium (NE) methods. In these two methods, the 7SGP is represented using DREIDING interatomic potential. MD outputs predicted 0.59 and 0.58 W/mK values for thermal conductivity (TC) of 7SGP at T0 = 300 K and P0 = 1 bar using E and NE methods. Furthermore, computational results represented that the pressure (P) and temperature (T) are significant factors for the TB of 7SGP. Numerically, TC of 7SGP reaches 0.68 W/mK, 0.52 W/mK by T/P increasing. MD results predicted the interaction energy (IE) between 7SGP and aqueous media could fluctuate between -110.64 and 161.53 kcal/mol by the change in T/P after t = 10 ns?These results should be supposed to design new methods for various food industry purposes, such as producing and processing edible oils.
Assuntos
Globulinas , Simulação de Dinâmica Molecular , Temperatura , Proteínas de Plantas/química , Proteínas de Plantas/metabolismo , Glycine max/químicaRESUMO
Reasonable regulation of the micro-morphology of material can significantly enhance the related performance. Herein, bismuth tungstate (Bi2WO6, simplified as BWO) porous hollow spheres with flower-like surface were prepared successfully, and this unique morphology endowed BWO with improved photocatalytic performance by reflecting and absorbing the light multiple times inside the cavity. To inhibit the rapid recombination of photogenerated e--h+ pairs within BWO itself, black phosphorous quantum dots (BPQDs) were anchored onto the nanosheets of BWO sphere closely by a facile self-assembly process, which will not shade the pores of BWO owing to the small size of BPQDs, but the BP nanosheets have the chance to do that. The band gap of BPQDs expanded much after exfoliation due to the quantum confinement effects, which matched the energy band of BWO well to form S-scheme heterojunction, achieving more efficient separation of photogenerated charges. As a result, the BPQDs/BWO exhibited attractive photocatalytic performance in the degradation of amoxicillin (AMX) and other antibiotics. Besides, the operation conditions were optimized, specifically, 94.5 % of AMX (20 mg/L, 200 mL) can be removed in 60 min when 50 mg of 2BPQDs/BWO was used as catalyst with solution pH = 11. Moreover, a possible degradation pathway of AMX was proposed based on the detected intermediates.
Assuntos
Amoxicilina , Pontos Quânticos , Fósforo , Porosidade , LuzRESUMO
Intelligent single-layer packaging is widely used in food monitoring and storage. However, most single-layer intelligent packaging has poor mechanical strength and water barrier properties. In this study, a bilayer intelligent detector film based on polyvinyl alcohol-chitosan (PVA-CS)/nano-ZnO/sodium alginate (SA) combined with anthocyanin extract (cyanidin chloride) was prepared using a layer-by-layer solution casting assembly technique. The effects of different levels of anthocyanin extracts on the physical and functional properties of the films, including microstructure, mechanical property, barrier property, pH sensitivity, and antibacterial property, were investigated. The results show that the bilayers exhibit excellent physical properties, lower water vapor permeability, better light transmission and UV-blocking properties, a broader pH sensitivity (ΔE > 10), and good antibacterial activity. In short, the bilayer films studied are superior to the single-layer films in terms of their packaging potential for products with low moisture content, offering new directions for active intelligent packaging and biodegradable materials for the food industry.
RESUMO
The three-dimensional (3D) surface-enhanced Raman scattering (SERS) substrate for trace molecule detection has recently attracted considerable interest; however, these substrates generally either show poor sensitivity or require a complex preparation process. In this work, we have fabricated a 3D ZnO/Ag substrate using porous zeolite imidazole frameworks (ZIF-8) derived ZnO nanoparticles (NPs) followed by evaporation-induced self-assembly of Ag NPs over it, which can detect multiple environmental pollutants by a facile and cost-effective method. This 3D porous substrate showed an ultra-sensitivity for detecting various types of molecules, e.g., rhodamine 6G (R6G), crystal violet (CV), tetracycline, and thiram, simultaneously suggesting its generality. Notably, the lowest detectable concentration (LDC) attained for R6G is 10-13 M, and the enhancement factor (EF) reaches up to 1.8 × 108. The most important reason for ultra-sensitivity is that ZnO derived from ZIF-8 has a hierarchical porous structure and large surface area to provide more "hot spots" and absorb more probe molecules. Consequently, the ZnO/Ag nanostructures show excellent photocatalytic performance. The detected probe molecules could be completely degraded in situ within a short UV exposure time (<30 min), thereby enabling outstanding reusability of this substrate. Finite-different time-domain (FDTD) simulations were used to understand the underlying mechanism of the substrate by calculating electric fields and hot spot distributions. The simulations suggested that the widespread hot spots structures on the substrate are the main reason for its SERS ultra-sensitivity.
Assuntos
Poluentes Ambientais , Nanopartículas Metálicas , Nanoestruturas , Óxido de Zinco , Porosidade , PrataRESUMO
In this work, the phase behavior of the poly(vinyl alcohol) (PVA)/alkyl ethoxysulfate (AES)/water ternary system is investigated at 25 °C. The PVA/AES/water ternary phase diagram is conducted which shows that there are two main phases corresponding to the solid phase and the hexagonal liquid crystalline phase (H) in the ternary system. Besides these two phases, a high-viscosity liquid phase (L2) and a micellar phase (L1) can also be found in the phase diagram, although they just occupy small areas. Polarizing optical microscopy and small-angle X-ray scattering are used to characterize the different lyotropic liquid crystal types. Moreover, the viscosity distribution and oscillation tests are also performed by means of the rheometer. High elastic modulus (G') and viscous modulus (Gâ³) can be found in the H and the L2 phase, whereas both moduli are low in the L1 region. The PVA/AES/water ternary phase diagram provides a good guide for accelerating the selection of the detergent formula, whereas the rheological tests provide an application guidance for industrial operations. Beyond tis, the L1 region is considered to be a reasonable range for slurry making because of its good fluidity and low viscoelasticity. This research enriches the content of polymer-surfactant aggregates and promotes the development of solid detergent manufacturing industry.
RESUMO
BACKGROUND: Melt crystallization is typically recognized as a highly efficient and green method for oil fractionation. This work concentrated on novel layer melt crystallization for preparing desirable olein and stearin products from palm oil and the evaluation of fraction quality. Layer melt crystallization was performed at various temperatures and the effects on fractions were evaluated using iodine value (IV), solid fat content (SFC) and melting point. The lipid composition, thermal and crystallization properties, and phase behaviors of the final optimized fractions were determined using gas chromatography, high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry and differential scanning calorimetry. RESULTS: Increasing crystallization tube temperatures under the same jacket temperature increased the melting point and SFC, while decreasing the IV of the olein product. Opposite results were observed for the stearin product. Major fatty acids in fractions were determined as palmitic acid and oleic acid. 1,2-Dioleoyl-3-palmitoylglycerol and 1,3-dipalmitoyl-2-oleoylglycerol were identified as the main triacylglycerols in olein and stearin fractions, respectively. A critical effect of crystallization temperature on co-crystallization of oleins and stearins was revealed. A transition from plate-like crystal growth to spherulitic growth with spontaneous nucleation was indicated in palm oil and stearin fractions with increasing crystallization temperature. As for olein fractions, a temperature increase resulted in heterogeneous nucleation from instantaneous nucleation. CONCLUSIONS: Novel layer melt crystallization was successfully applied and optimized for fractionating palm oil. The composition and property changes of obtained fractions were analyzed and explained at both macroscopic and microscopic levels. © 2021 Society of Chemical Industry.
Assuntos
Lipídeos/química , Ácido Oleico/química , Óleo de Palmeira/química , Ácidos Esteáricos/química , Varredura Diferencial de Calorimetria , Cromatografia Líquida de Alta Pressão , Cristalização , Espectrometria de Massas , TemperaturaRESUMO
In this work, a microemulsion emitting fluorescence was fabricated as a potential oral delivery system for bioactive compounds. In simulated oral administration, the microemulsion was characterized for its microstructure by 1hydrogen-nuclear magnetic resonance (1H-NMR). Results showed that microemulsions not only have good resistance to oral and gastric phases, but also lay a solid foundation for the release of bioactive compounds in the intestine. Fluorescence stability tests showed that microemulsions exhibit a remarkable fluorescence intensity in the digestive environment, indicating feasibility as a label-free delivery carrier. Moreover, in vitro release tests of bioactive compounds confirmed that an α-linolenic acid (ALA)-loaded microemulsion mainly released in the intestine, thereby achieving the aim of controlling the release of bioactive compounds. These results suggest that the synthesized fluorescent microemulsion, combining the favorable features of nontoxicity, antidigestive stability, remarkable fluorescence intensity, and controllable release, can be regarded as a promising label-free delivery carrier for oral administration.
Assuntos
Sistemas de Liberação de Medicamentos/instrumentação , Emulsões/química , Ácido alfa-Linolênico/química , Administração Oral , Emulsões/administração & dosagem , Fluorescência , Espectroscopia de Ressonância Magnética , Tamanho da Partícula , Ácido alfa-Linolênico/administração & dosagemRESUMO
Sodium ascorbyl phosphate is a hydrophilic derivative of ascorbic acid with better stability compared to the parent compound. However, sodium ascorbyl phosphate is not as stable in solution as it is in the solid state, and it has been found to degrade, with accompanying discoloration, under the influence of different conditions. Here, the degradation mechanism of sodium ascorbyl phosphate in the water-glycerol system was revealed and the thermal degradation kinetics was shown to follow second-order kinetics. A thermal degradation prediction model was established and successfully fitted to the experimental data. In addition, the stability of sodium ascorbyl phosphate in the water-glycerol system during storage was investigated under different conditions, including changes in concentration, temperature, pH, light and oxygen, and metal ions. Sodium ascorbyl phosphate content was quantitatively measured via HPLC, and the color and pH values of the sample were qualitatively measured using a spectrophotometer and a pH meter, respectively. It was found that temperature and pH are the most important factors affecting the stability of sodium ascorbyl phosphate.
Assuntos
Ácido Ascórbico/análogos & derivados , Estabilidade de Medicamentos , Glicerol/química , Água/química , Ácido Ascórbico/análise , Armazenamento de Medicamentos , Concentração de Íons de Hidrogênio , Cinética , TemperaturaRESUMO
In this work, the effects of α-linolenic acid (ALA) loaded in oil-in-water (O/W) and water-in-oil-in-water (W/O/W) microemulsions on cell viability, lactic dehydrogenase (LDH) viability, and reactive oxygen species (ROS) levels were examined using Cell Counting Kit-8 (CCK-8), an LDH assay kit, and a fluorescence microscope, respectively. The CCK-8 assay demonstrated that ALA inhibited MDA-MB-231 human breast cancer cell proliferation in a dose-dependent manner. Further, the results of LDH activity and ROS levels revealed that ALA-induced cancer cell damage was closely related to oxidative stress. Under the irradiation of ultraviolet light, the microemulsion without any added fluorescent dye would emit bright blue fluorescence, and the fluorescent images of the cells treated with ALA-loaded O/W and W/O/W microemulsions at different incubation times were taken, which exhibited long-term photostability and biocompatibility. In addition, the fluorescence mechanism of the microemulsion was explained by immobilizing surfactant molecules with aggregation-induced emission (AIE) properties at the water-oil interface through the microemulsion with a self-assembled structure. These findings showed the potential application of O/W and W/O/W microemulsions as the label-free delivery carriers in long-term imaging of living cells and real-time release monitoring of nutrients.
Assuntos
Proliferação de Células/efeitos dos fármacos , Ácido alfa-Linolênico/química , Ácido alfa-Linolênico/farmacologia , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , Portadores de Fármacos/química , Emulsões/química , Emulsões/farmacologia , Fluorescência , Humanos , Óleos/química , Espécies Reativas de Oxigênio/metabolismo , Água/químicaRESUMO
To further understand the mechanism of the impact of perfume raw materials (PRMs) such as allyl heptoate (AHT) and cashmeran (CMR) on distearoyl isopropyl dimethylammonium methyl sulfate (DIDMAMS) bilayers, 90 ns molecular dynamics simulations were conducted to investigate the structure of bilayers consisting of DIDMAMS and PRMs at 350 K on the molecular scale. Structural properties such as density profiles, order parameters, radial distribution functions (RDFs), and bilayer thickness were analyzed. The bilayers appear to be the structure of the ripple phase whether PRMs are added or not. The RDF and density profiles show that CMR molecules tend to locate in the region close to head groups and AHT molecules prefer to uniformly distribute among hydrocarbon chains. The special distribution of CMR molecules results in hydrocarbon chains twining around CMR molecules. The existence of CMR molecules between bilayers and the consequent highest bilayer thickness may be the main cause of higher viscosity. We expect that this work can help to screen stable vesicular formula and understand the relationship between microstructures of the vesicles and macroscopic fluidic properties.
RESUMO
Our previous work has demonstrated that α-linolenic acid (ALA)-loaded oil-in-water (O/W) microemulsion could enhance ALA antioxidant capacity. Meanwhile, we also observed that synthesized microemulsion itself had fluorescence. In this work, we have prepared a multiple water-in-oil-in-water (W/O/W) microemulsion to further enhance ALA antioxidant capacity and activate this delivery carrier application potential with a free label. The compositions of primary water-in-oil (W/O) microemulsion were obtained using pseudo-ternary phase diagrams, and then W/O/W microemulsion was prepared adopting the "two-step heterotherm method". The conductivity of W/O/W microemulsion was measured to lie between 250.0 and 350.0 µs/cm. The spherical droplets with a mean particle diameter of 10.0-20.0 nm were confirmed by transmission electron microscopy and dynamic light scattering. Nuclear magnetic resonance confirmed that ALA diffused to the multiple water-oily interface simultaneously. In addition, the in vitro release and antioxidant capacity measurements of ALA-loaded W/O/W microemulsion concluded the sustained-release effect and excellent antioxidant capacity. The fluorescent intensity of W/O/W microemulsion was markedly increased in comparison to O/W microemulsion. The synthesized microemulsion could lead to important applications and have advantages of a label-free fluorescent carrier for optical imaging purposes.
Assuntos
Emulsões/química , Ácido alfa-Linolênico/administração & dosagem , Ácido alfa-Linolênico/química , Antioxidantes , Sistemas de Liberação de Medicamentos , Condutividade Elétrica , Fluorescência , Tamanho da Partícula , Pentanóis/química , Espectrometria de Fluorescência/métodos , Tensoativos , Água/químicaRESUMO
Various active ingredients play a crucial role in providing and supplementing the nutritional requirements of organisms. In this work, we attempted to chemically manipulate the interfacial microstructure of oil-water microemulsions (ME) with carbon dots (CDs), concentrating on substantially enhancing the antioxidant capacity of α-linolenic acid (ALA). To this end, CDs were synthesized and introduced into an ME. The molecular interaction of surfactant with CDs was investigated by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The microstructure of the ME was monitored by transmission electron microscopy (TEM) and cryo-electron microscopy (cryo-EM). The cryo-EM result showed the oil-water interface in the ME was better defined after the CDs were loaded, and 1H NMR proved the CDs were distributed mainly at the interface. On the basis of these results, interfacial models were proposed. Final evaluation results demonstrated the stabilizing effect and oxidation-inhibition ability of the ALA-loaded ME was substantially enhanced after the introduction of the CDs, indicating a "turn off" effect of the interface. Interestingly, CDs do not affect the in vitro release of ALA, indicating a "turn on" effect of the interface. This work provided a successful interface manipulation with a nanocarrier that can be used for a large diversity of food nutraceuticals.
Assuntos
Antioxidantes/química , Óleos/química , Ácido alfa-Linolênico/química , Carbono/química , Emulsões/química , Espectroscopia de Ressonância Magnética , Espectroscopia de Infravermelho com Transformada de Fourier , Água/químicaRESUMO
α-Linolenic acid (ALA)-loaded microemulsion (ME) was prepared from isoamyl acetate, polyoxyethylene ether 35 (EL-35), ethanol and water. The dynamic phase behaviour was simulated using dissipative particle dynamics (DPD), which showed that spherical ME was formed at water/oil ratios of 1:9 and 9:1, while a lamellar structure with distinctive water-course and oil layer appeared at ratios of 3:7, 5:5, and 7:3. Phase stabilizing and anti-oxidation effect of environmental stresses on ALA-loaded microemulsion were investigated. Results showed that the ME region was large and had good environmental tolerance. Subsequently, the investigation of anti-oxidation stability revealed that more than 60% ALA of ALA-loaded ME could be protected from oxidation under environmental stresses. Furthermore, ALA-loaded ME was applied in aqueous-based foods. The transparency, precipitate, stratification and phase separation were used to evaluate influence of ME on product properties, confirming great feasibility and stability of ALA-loaded ME for practical applications.
Assuntos
Meio Ambiente , Modelos Teóricos , Óleos/química , Estresse Fisiológico , Água/química , Ácido alfa-Linolênico/química , Emulsões , OxirreduçãoRESUMO
Nanoscale microemulsions have been utilized as delivery carriers for nutraceuticals and active biological drugs. Herein, we designed and synthesized a novel oil in water (O/W) fluorescent microemulsion based on isoamyl acetate, polyoxyethylene castor oil EL (CrEL), and water. The microemulsion emitted bright blue fluorescence, thus exhibiting its potential for active drug detection with label-free strategy. The microemulsion exhibited excitation-dependent emission and distinct red shift with longer excitation wavelengths. Lifetime and quantum yield of fluorescent microemulsion were 2.831 ns and 5.0%, respectively. An excellent fluorescent stability of the microemulsion was confirmed by altering pH, ionic strength, temperature, and time. Moreover, we proposed a probable mechanism of fluorochromic phenomenon, in connection with the aromatic ring structure of polyoxyethylene ether substituent in CrEL. Based on our findings, we concluded that this new fluorescent microemulsion is a promising drug carrier that can facilitate active drug detection with a label-free strategy. Although further research is required to understand the exact mechanism behind its fluorescence property, this work provided valuable guidance to develop new biosensors based on fluorescent microemulsion.
Assuntos
Corantes Fluorescentes/química , Portadores de Fármacos , Emulsões , Solubilidade , Tensoativos , ÁguaRESUMO
The applications of α-linolenic acid (ALA) in the food industry are restricted due to its poor water solubility and antioxidant stability. This study concentrates on developing an ALA-loaded microemulsion (ALA-ME) to enhance its solubility and antioxidant capacity. The formulation of the microemulsion was investigated based on pseudoternary phase diagrams. The ALA-ME was characterized by using electrical conductivity, viscosity and transmission electron microscopy (TEM). The microstructure of the ALA-ME was probed using nuclear magnetic resonance (1H-NMR). The results proved that ALA-ME consisted of spheroidal droplets with 20-40 nm diameter. A structural transformation from water in oil (W/O) to oil in water (O/W) occurred, as seen from the electrical conductivity determination. The 1H-NMR results revealed a transition of the ALA position encapsulated from the core area of the microemulsion to the lipophilic layer of the surfactant. Furthermore, two microstructural models of ALA-ME were proposed. The antioxidant evaluation demonstrated that the ALA antioxidant capacity in microemulsions was enhanced to about 80% compared with that of ALA in oil solution.
Assuntos
Antioxidantes/química , Ácido alfa-Linolênico/química , Condutividade Elétrica , Emulsões/química , Óleos/química , Tamanho da Partícula , Solubilidade , Viscosidade , Água/químicaRESUMO
Kudzu starch was cross-linked with sodium trimetaphosphate (STMP) at different temperatures, time and of STMP concentrations in this work. The cross-linked starches (CLSs) were fractionated further into cross-linked amylose and amylopectin in order to compare the effect of cross-linking on the microstructure. According to scanning electron microscope (SEM), CLSs displayed the resemble appearance of spherical and polygonal shapes like NS. X-ray diffraction (XRD) revealed that amylose of native starch (A), NS and CLS displayed a combination of A-type and B-type structure, while that was not found in amylose of cross-linked starch (CLA). The deconvoluted fourier transform infrared (FT-IR) indicated that crystal structure of kudzu starch was losing with the proceeding of cross-linking reaction. The CLSs exhibited a higher retrogradation and freeze-thaw stability than NS. This was accompanied by a significant decrease in sedimentation, transparency, swelling power and solubility.